0x7e blue screen

original title: blue screen

For awhile now, my computer sometimes primer not correctly or yesterday I left it close and came back 12 hours later how he was always showing "Shutting Down"...

I have windows Vista and now when I turn on my computer, I get a blue screen saying

"A problem has been detected and Windows has shut down to prevent damage to your computer.

If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:

Make sure you have enough disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video adapters.

Check with your hardware vendor for updates to the BIOS. Turn off the BIOsmemory options such as implementing caching or shading. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode.

Technical information:
"STOP: 0X0000007E (0 X 0000005, 0X83ABA549, 0X885C3BB8, 0X885C38B4).

It is very important that I return in this computer for files it holds, but I didn't save everything up to... a lot of family documents are on this computer as well as photographs, etc...

I tried restarting in safe mode to at least save the files etc, but even when I select this option, the blue screen comes back...

No one can solve my problem?

Thank you

Hi KerryKirk,

I suggest you follow the provided article and check if it helps.

http://support.Microsoft.com/kb/941021

Tags: Windows

Similar Questions

  • Windows XP blue screen - Stop 0x7E

    I'll have this problem blue screen for a few days and have not been able to solve. Please help if you know how to solve this problem.

    STOP:

    0x0000007E (0xC0000005, 0xBA4B915E, 0xBA50B86C, 0xBA50B568)

    kdcom.dll - address BA4B915E base at BA4B8000, DateStamp 4ed8a0bd

    Help, please. Thank you very much.

    Try following the steps described here

  • Blue screen - Stop 0x7E

    Original title : Blue screen reads...

    Problem detected windows closed, need to check disk space, updated driver, bios update Tech information: Stop: 0x0000007e (0xC0000005, 0x00000000, 0xF799CC50, 0xF799C94C)

    Please dump memory phy

    PHY full memory

    Contact admin system

    Hello

    I suggest you follow the troubleshooting steps form the article and check if it helps.

    How to troubleshoot a Stop error 0x0000007E in Windows XP

    http://support.Microsoft.com/kb/330182

  • Blue screen: 0x7e during installation of windows xp

    original title: blue screen of death during the installation of windows xp

    I just bought a motherboard ASUS p5g41t-mlx with a Pentium E5400 2.7 GHz dual core and a hard drive when booting with the windows xp cd in, it goes through the initial configuration and is preparing to restart the computer when I get a blue screen (this is before we get to make a partition)

    It's basically my blue screen message

    problem detected windows stops to prevent damage of the model
    Check for sufficient disk space. If a driver is identified in the stop message, disable it or check updates,
    try changing video cards

    control the bios upgrade. Disable the bios memory options such as implementing caching or shading. Start in
    safe mode to remove or disable components

    STOP: OXOOOOOO7E (0xc0000005, 0xf748e0bf, oxf78da208, 0xf78d9f08)
    PCI.sys - address f748e0bf base at f7487000, DateStamp 3b7d855c

    I just bought a motherboard ASUS p5g41t-mlx with a Pentium E5400 2.7 GHz dual core and a hard drive when booting with the windows xp cd in, it goes through the initial configuration and is preparing to restart the computer when I get a blue screen (this is before we get to make a partition)

    It's basically my blue screen message

    problem detected windows stops to prevent damage of the model
    Check for sufficient disk space. If a driver is identified in the stop message, disable it or check updates,
    try changing video cards

    control the bios upgrade. Disable the bios memory options such as implementing caching or shading. Start in
    safe mode to remove or disable components

    STOP: OXOOOOOO7E (0xc0000005, 0xf748e0bf, oxf78da208, 0xf78d9f08)
    PCI.sys - address f748e0bf base at f7487000, DateStamp 3b7d855c

    Have you installed the drivers SATA asks to press F6 to install drivers from floppy drive?  Assuming you have this type of "new HDD" with your new motherboard.  (small cable from motherboard to the drive instead of wide ribbon cable.)
     
    You may need to go into the bios of the computer to IDE mode to install the operating system.  Once installed, you can install the SATA drivers and then move into the bios SATA mode for the HARD disk controller.

  • Blue screen of death - Stop 0x7E

    Hi guys recently I was struck with tht stupid vista 2011 anti spyware stuff... so I opened a session in safe mode and ran a scan through malwarebytes and removed 2 nw virus, trying to logg bk in normal mode, I am struck BLUE SCREEEEN of thoughts and suggestions? I've read a few threads, and my friend ask me to remove these 2 speed of the temp folder in appdata (WERf085 and WER 66503), it went well for 5 minutes, but again, I still have the same problem... I tried other ways boot upward as well, but no results, I did 3 times the system without help restore... Please someone HELP ME here is the last report I got the blue screen crash
    Signature of the problem:
    Problem event name: BlueScreen
    The system version: 6.0.6002.2.2.0.768.3
    Locale ID: 1033

    More information about the problem:
    BCCode: 1000007e
    BCP1: C0000005
    BCP2: B3373976
    BCP3: 88D5BA20
    BCP4: 88D5B71C
    OS version: 6_0_6002
    Service Pack: 2_0
    Product: 768_1

    Files helping to describe the problem:
    C:\Windows\Minidump\Mini122911-02.dmp
    C:\Users\Noah Samson\AppData\Local\Temp\WER-72212-0.sysdata.xml
    C:\Users\Noah Samson\AppData\Local\Temp\WER54D.tmp.version.txt

    Read our privacy statement:
    http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

    Noah needs help, when the antivirus suddenly starts to have problems, it is usually something in the sense of the update of the components, but not all of them successfully doing so. This is due to the antivirus feature. That being said, I took a look at the dump and noticed that drivers are a little old standards antivirus. For example: C:\WINDOWS\SYSTEM32\DRIVERS\SYMEVENT C:\WINDOWS\SYSTEM32\DRIVERS\SYMEVENT. SYS Mon Jan 14 17:29:24 2008 SRTSPL SRTSPL. SYS Wed Oct 08 15:54:43 2008 I would like to recommend the following after speaking with the support of the school first: download the latest version of Symantec; Uninstall the version currently on the system; Reinstall Symantec with the version downloaded in step 1. Let us know if you have any questions. Best regards, Matthew_Ha

  • Unable to boot to HARD drive or disc - blue screen Vista: 0 x 50 or 0x7E

    I can't start Vist from my drive hard or with the installation disc. Boot from the HARD drive gives a blue screen with the error 0x000007E code and boot from the drive allows me to launch the recovery program, but once I click NEXT for the first time, it goes to a blue screen with error code 0 x 0000050.

    I saw a lot of people have had these errors when the computer is running, however, I'm not able to start somehow, not even in safe mode, last known good configuration, etc.. I also tried to clear the CMOS with no luck.
    Any help would be appreciated.
    It starts very well when I got to work last night, but won't do a thing tonight.

    Hey Ross,

    Unplug all external devices (except keyboard and mouse) and check if it can boot up to the desktop in all modes.
    If this is not the case, contact the manufacturer of the system for more help.

  • Blue screen when installing Win XP Pro on the Satellite A100-211

    Hi all.

    I'm started to get really desperate here! I just bought my new Satellite A100-211 and now I want to install my own copy of Windows XP Professional (as the laptop comes with XP Home). But, when I try to boot from my Win Xp Pro CD (with no SP1 or SP2 integrated), I get a blue screen of the STOP just as the installation application reached the phase "the installation program starts Windows! The STOP message says something about a file named "pci.sys".

    I don't know what the problem is or how to install XP Pro! It should be so simple! I even tried the SATA drivers from intel and load the Windows XP Pro install the program installation (F6) with a floppy, but I always get the same blue screen at the same stage of the installation.

    Can someone help me please? Can someone explain how to install Win XP Pro on this laptop?

    Thank you very much in advance! I'm really really freak out with this
    Octavio.

    Hello

    Did you get this error message?
    "stop error 0x7E in Pci.sys".

    I found information on the Microsoft site that you need the latest Microsoft service pack.
    http://support.Microsoft.com/?kbid=839641

  • Error 0x0000007E on normal startup, Mup.sys on SafeMode boot blue screen

    original title: BSOD on normal boot, safe mode startup Mup.sys

    So today, I got 18 updates on my laptop and Microsoft Office. I did both at the same time on both computers and my laptop lights no more.  My office works very well. two of my computers have XP Pro on them.

    If I boot in safe mode it hangs

    multi (0) disk (0) rdisk (0) partition (1) \WINDOWS\System32\Drivers\Mup.sys

    If I boot normally I get a bluescreen with

    Technical information:
    STOP: 0X0000007E (0X805BA6EC, 0XBACCB2B8, 0 X 80000003, 0XBACCAFB4)

    My bios is A05 which is common for a Dell Latitude D810.

    Is there a fix or is dead XP?

    Hello

    You have a Restore Point before this happened?

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    Visit this link before you restore just in case that is your problem.

    http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/276904c0-e775-4AC9-92b3-8abf465f8d4d

    Try a restore of the system to a point before that happened. And immediately thereafter enter
    Control Panel - Windows updates - top left settings and set it to download and informs you instead
    Automatic. Leave it until you are sure that everything is OK and then you can add them one at a time
    to troubleshoot BUT click right on and HIDE all the driver updates. Also stop at day of drivers like below
    and let this value - manually search for drivers when you think you need. (See how and why to)
    stop day of drivers below.)

    -----------------------------------------

    Cause

    SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. To interpret it, you must identify which exception has been generated.

    Common exception codes are:

    • 0 x 80000002: STATUS_DATATYPE_MISALIGNMENT indicates an unaligned data reference was encountered.
    • 0 x 80000003: STATUS_BREAKPOINT indicates a breakpoint or ASSERTION was met when no kernel debugger was attached to the system.
    • 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.

    For a complete list of exception codes, see the Ntstatus.h file located in the directory Inc. of the Microsoft Windows Driver Kit (WDK).

    Solve the problem

    If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

    • Make sure you have enough disk space.
    • If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
    • Try changing video cards.
    • Check with your hardware vendor for updates to the BIOS.
    • Disable the BIOS memory options such as implementing caching or shading.

    If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.

    If exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system was launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly, make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .

    In case of exception code 0 x 80000002, the trap frame provides additional information.

    If you do not know the specific cause of the exception, consider the following questions:

    • Hardware incompatibility. Ensure that any new hardware that is installed is listed in the list of the products tested Microsoft Windows market.
    • Service driver or defective peripheral system. A chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.

    If a driver is listed by name in the bug check message, disable or remove that driver. Disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.

    If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, you can remove the service by starting the computer by using the recovery and then Console by removing the offending system service file.

    Check the system log in Event Viewer for additional error messages that might help identify the device or driver responsible for control of bug 0x7E.

    You can also disable memory cache BIOS may try to resolve the error. You must also run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system. For more information about these procedures, see the manual of your computer.

    The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For any problems during the installation of Windows that are associated with lack of disk space, reduce the number of files on the hard disk drive target. Search and delete temporary files that you do not have to have, files hidden Internet, application backup files and files saved .chk , which contain fragments of files on disk scans. You can also use an another hard disk drive with more free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

    More information on troubleshooting blue screens below.

    -------------------------------------------------------------

    Stop the automatic driver updates as below - use these methods when you want to update the drivers.

    This is my generic how updates of appropriate driver:

    This utility, it is easy see which versions are loaded:

    -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
    each driver in the list, additional useful information is displayed: load address of the driver, description,.
    version, product name, company that created the driver and more.
    http://www.NirSoft.NET/utils/DriverView.html

    For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
    Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
    video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
    cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
    This will refresh the driver stack.

    Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
    own the software and drivers and all other main drivers that you have.

    Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
    (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
    updates on the site of the manufacturer of the system here.)

    Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

    Always check in the Device Manager - tab drivers version you install actually shows up. This
    because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
    pilot - reboot - check that it is installed and repeat if necessary.

    Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
    This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
    questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
    manually if you wish.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    I hope this helps.

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • 0x0000007E (0xc0000005 0x806a0c04 0x803995ec 0x803992e8) error messages on a blue screen... Please help, 3 days of problems

    I'm not a computer expert, so please exscuse me, 3 days ago, the computer kept freezing, I am running a packard bell intel celeron with windows vista, I have norton anti virus so I don't think my problem is the apparent virus, first Frost was intermittent but after an hour or two , all froze and wouldn't respond, I disconnected the power and he started upward, repair of windows says something along the lines of stacking and told me I had to check my drivers, I rebooted and was able to get back on but after a few minutes it kept freezing up again I went through the process and finally managed to put online, a message popped up on my screen telling me to update vista to service pack 2, I did, the computer seems to work very well so I thought that the problem has been resolved, yesterday when I turned on the same thing happened, yet once I went through the process and finally got the computer to work after several attempts , it would start up then restart itself or sometimes the screen would be just black and nothing would happen, the computer would be buzz but anything in life. yesterday after finally getting to turn on another message came up saying there are 31 important updates for vista, I downloaded once again of course it seremed work very well and I thought it was fixed, but unfortunately not yet today the same thing happens when I arrived to start the computer I decided to write the blue screen messages that include

    0x0000007E (0xc0000005 0x806a0c04 0x803995ec 0x803992e8) acpi.sys - address 806A0C04 base at 80 68 B000
    After that a long stay him to start it in safe mode, which took 2 hours is the same in safe mode, just frozen, I tried again and got to work in safe mode and it froze again and finally I managed to get to the top and works normally, I really have no idea what is wrong or how to fix it I managed to save important things like the photos that I have the impression that he wants to die, I even tried the system restore which is nothing because when it updated 2 days ago, it wipe all old restore points and so I absoloutley no way to restore to a point before he decides to drop , I have not downloaded new software in the last months have so no idea what could the cause of the problem, please help, and remember that while I can work around the basics I'm not an expert so please try to keep it simple :)

    0x7E bug check code
    http://msdn.Microsoft.com/en-us/library/ff559239 (v = VS. 85) .aspx

    Norton could be part of the problem but leave that for now.

    The amount of RAM is installed? Have you recently made any cham = nges?

    Start the computer in safe mode with network and download and install Malwarebytes (free version for individuals only), updated definitions and run in safe mode. Disable other security software while you do the analyses.
    http://www.precisesecurity.com/how-to/HT-smodewnet.htm
    http://www.Malwarebytes.org/products/malwarebytes_free
    Download and run SuperAntiSpyware (Free Edition)
    http://www.SUPERAntiSpyware.com/download.html

    Event Viewer reports

    1. normally, when an error occurs on your computer looking in Event Viewer should be your starting point to find a solution. More related system errors are recorded and get an exact copy of the relevant report is important. Unfortunately, is not easy to understand reports and most of the users computer need help with their interpretation. I have to say later interpretation.

    2 Event Viewer includes three main newspapers of Windows. Here's the Application, security, and system. For purposes of troubleshooting system is by far the most important.

    3. to access the system log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window select Windows and the system logs. Place the cursor on the system, right click and select filter current log. Check the front of the error and click OK and see you only reports errors. Click the Date and time column header to sort. You may need to click a second time to see the last report above.

    4. a tip for posting copies of error reports! Run Event Viewer and double-click the error you want to copy. Select the Details tab and check the box in front of the XML view. Click the copy button to place a copy in the Clipboard and close Event Viewer. Now start your message and paste it into the body of the message. Make sure that it is the first dough right out of the event viewer.

    5. He cautioned against three types of reports, information, and reports errors. In most situations, it is the error reports that offer the best information but sometimes WARNING reports provide useful clues.

    6. all reports have stamps date and hour and when troubleshooting, it is important to focus on the latest reports. Reports of studies from the point when the computer is started, and then check if a similar report appeared in the previous session. If errors do not repeat investigation as to why they happen is wasted effort.

    7. in the individual reports the most important information is the event ID and Source such as these help when looking for help on the internet. The description is just as important and copy the exact text to use as search criteria greatly helps achieve better results when using Google. Not paraphrase descriptions when other people asking for help.

  • Blue screen Code: 1000007e - unable to start

    original title: BSOD on Vista, can use in safe mode but cannot use normally

    When turning on my computer is loading on the screen of the user, it will also load profiles but shortly after to go on a profile, it will be the BSOD.
    It starts in safe mode, I did some tests for viruses, malware and spyware and nothing came.
    This happens every time that apart from the occasional windows got the message, after having clicked on search for solutions, nothing else appears and later, it blocks again.

    Data indicated:
    Signature of the problem:
    Problem event name: BlueScreen
    OS version: 6.0.6002.2.2.0.768.2
    Locale ID: 2057

    More information about the problem:
    BCCode: 1000007e
    BCP1: C0000005
    BCP2: 040E0002
    BCP3: A32C2C80
    BCP4: A32C297C
    OS version: 6_0_6002
    Service Pack: 2_0
    Product: 768_1
    Operating system: Windows Vista

    Hello

    Check this thread for more information using BlueScreenView, MyEventViewer and other methods
    to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

    http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

    We can analyze the minidumps if make you it available to the SkyDrive or another file
    sharing sites.

    ZIP or download the content of the C:\Windows\minidump

    Use SkyDrive download collected files and after shot/screenshot.
    http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

    -------------------------------------------------------------------------

    Also this, so you can see the probable bluescreens.

    Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
    (also Windows 7)
    http://www.winvistatips.com/disable-automatic-restart-T84.html

    ===========================================================

    The system has RAID? If so, it's also very suspicious.

    This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
    may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
    can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
    methods in the next message and then return to the if necessary troubleshooting tool.

    Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
    Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
    spyware/security programs.

    When you get to the pilot and sections of the memory of the troubleshooter check the following message to
    update drivers and memory test and then return to the troubleshooter if necessary.

    BCCode: 7F 0x0000007E which is also 0x1000007E

    Cause

    SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. TO
    interpret, you must identify which exception has been generated.

    Common exception codes are:

    • 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.

    For a complete list of exception codes, see the Ntstatus.h file located in theinc directory
    the Microsoft Windows Driver Kit (WDK).

    Solve the problem

    If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

    • Make sure you have enough disk space.
    • If a driver is identified in the bug check message, disable the driver or check with the
    • Reference of the manufacturer for driver updates.
    • Try changing video cards.
    • Check with your hardware vendor for updates to the BIOS.
    • Disable the BIOS memory options such as implementing caching or shading.

    If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2
    (the address of the exception) must identify the driver or function that caused the problem.

    If the exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system
    has been launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly,
    Make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .

    In case of exception code 0 x 80000002, the trap frame provides additional information.

    If you do not know the specific cause of the exception, consider the following questions:

    • Hardware incompatibility. Make sure all new hardware that is installed is listed in the
    • List of Microsoft Windows Marketplace tested products.
    • Service driver or defective peripheral system. A service driver or defective peripheral system can be
    • responsible for this error. Hardware problems, such as the incompatibilities of the BIOS, memory, conflicts
    • and IRQ conflicts can also generate this error.

    If a driver is listed by name in the bug check message, disable or remove that driver. Disable
    or remove drivers or services that have been recently added. If the error occurs during startup
    sequence and the system partition is formatted with the NTFS file system, you may be able to use safe
    Mode to rename or to delete the faulty driver. If the driver is used as part of the system startup procedure
    in Safe Mode, you must start the computer by using the Recovery Console to access the file.

    If the problem is associated with Win32k.sys, the source of the error may be a third remote
    control program. If this software is installed, you can remove the boot of the computer service
    by using the Recovery Console, and then by removing the offending system service file.

    Check the system log in Event Viewer for additional error messages that might help identify the
    device or the driver that generated the bug check 0x7E.

    You can also disable memory cache BIOS may try to resolve the error. You should also
    Run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system.
    For more information about these procedures, see the manual of your computer.

    The error that generates this message may occur after the first reboot during Windows Setup, or
    Once the installation is complete. A possible cause of the error is lack of disk space for installation and system
    BIOS incompatibilities. For problems during the installation of Windows that are associated with the absence of disc
    space, reduce the number of files on the disk drive hard target. Find and delete any temporary
    the files that you do not have to have files hidden Internet, backup application and.chkfiles files that
    contain fragments of file saved to disk scans. You can also use another hard drive with more drive
    free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

    BCCode: 7F 0x00000007E who is also a 0x1000007E<-- read="" this="">
    * 1141.html? order = votes http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-

    ----------------------------------------------------------------------------------------------------------------------

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard event viewer
    Windows. TIP - Options - Advanced filter allows you to see a time rather
    of the entire file.
    http://www.NirSoft.NET/utils/my_event_viewer.html

    Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
    info that would help. Such as ITC and 4 others entered at the bottom left. And all others
    error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during ' blue screen of the.
    death ' crashes and displays information about all accidents of a table.
    Free
    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by drivers of old or damaged, in particular the video drivers
    However, there are other causes.

    You can do mode if necessary safe or the Vista DVD command prompt or
    Options recovery if your system is installed by the manufacturer.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    You can try a system restore to a point before the problem started when one exists.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    -------------------------------------------------------------------------

    Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
    RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
    program generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Does not work
    tell all possible driver issues).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
    keyboard and mouse, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
    quit unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting, STOP error blue screen Vista
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    The Options or Vista recovery disk Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    I hope this helps.

  • Blue screen on startup, the system restore / repair did not work?

    Hi, I get a blue screen on startup and cannot start windows - with the error code x0000007E.

    I followed the steps on http://support.microsoft.com/kb/958233#StartupRepair however runs the repair does not work, and did the system restore.

    Will be saved my files / is there a way to fix this? Thank you!

    Hello

    You can save your files by putting the drive in another computer as a 2nd disk (best) or external
    Drive USB enclosure and then backup to removable media such as CD, DVD or other USB drives.
    Of course a real store of the computer or the manufacturer of your system can help to recover the files.

    Or you can use a boot Ubuntu CD to back up data.

    Use Ubuntu Live CD to backup files from your Windows computer dead
    http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

    --------------------------------------------------------------

    Check this thread for more information using BlueScreenView, MyEventViewer and other methods
    to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

    http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

    We can analyze the minidumps if make you it available to the SkyDrive or another file
    sharing sites.

    ZIP or download the content of the C:\Windows\minidump

    Use SkyDrive download collected files and after shot/screenshot.
    http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

    -------------------------------------------------------------------------

    Also this, so you can see the probable bluescreens.

    Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
    (also Windows 7)
    http://www.winvistatips.com/disable-automatic-restart-T84.html

    ===========================================================

    The system has RAID? If so, it's also very suspicious.

    This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
    may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
    can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
    methods in the next message and then return to the if necessary troubleshooting tool.

    Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
    Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
    spyware/security programs.

    When you get to the pilot and sections of the memory of the troubleshooter check the following message to
    update drivers and memory test and then return to the troubleshooter if necessary.

    BCCode: 7F 0x0000007E which is also 0x1000007E

    Cause

    SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. TO
    interpret, you must identify which exception has been generated.

    Common exception codes are:

    • 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.

    For a complete list of exception codes, see the Ntstatus.h file located in theinc directory
    the Microsoft Windows Driver Kit (WDK).

    Solve the problem

    If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

    • Make sure you have enough disk space.
    • If a driver is identified in the bug check message, disable the driver or check with the
    • Reference of the manufacturer for driver updates.
    • Try changing video cards.
    • Check with your hardware vendor for updates to the BIOS.
    • Disable the BIOS memory options such as implementing caching or shading.

    If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2
    (the address of the exception) must identify the driver or function that caused the problem.

    If the exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system
    has been launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly,
    Make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .

    In case of exception code 0 x 80000002, the trap frame provides additional information.

    If you do not know the specific cause of the exception, consider the following questions:

    • Hardware incompatibility. Make sure all new hardware that is installed is listed in the
    • List of Microsoft Windows Marketplace tested products.
    • Service driver or defective peripheral system. A service driver or defective peripheral system can be
    • responsible for this error. Hardware problems, such as the incompatibilities of the BIOS, memory, conflicts
    • and IRQ conflicts can also generate this error.

    If a driver is listed by name in the bug check message, disable or remove that driver. Disable
    or remove drivers or services that have been recently added. If the error occurs during startup
    sequence and the system partition is formatted with the NTFS file system, you may be able to use safe
    Mode to rename or to delete the faulty driver. If the driver is used as part of the system startup procedure
    in Safe Mode, you must start the computer by using the Recovery Console to access the file.

    If the problem is associated with Win32k.sys, the source of the error may be a third remote
    control program. If this software is installed, you can remove the boot of the computer service
    by using the Recovery Console, and then by removing the offending system service file.

    Check the system log in Event Viewer for additional error messages that might help identify the
    device or the driver that generated the bug check 0x7E.

    You can also disable memory cache BIOS may try to resolve the error. You should also
    Run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system.
    For more information about these procedures, see the manual of your computer.

    The error that generates this message may occur after the first reboot during Windows Setup, or
    Once the installation is complete. A possible cause of the error is lack of disk space for installation and system
    BIOS incompatibilities. For problems during the installation of Windows that are associated with the absence of disc
    space, reduce the number of files on the disk drive hard target. Find and delete any temporary
    the files that you do not have to have files hidden Internet, backup application and.chkfiles files that
    contain fragments of file saved to disk scans. You can also use another hard drive with more drive
    free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

    BCCode: 7F 0x00000007E who is also a 0x1000007E<-- read="" this="">
    * 1141.html? order = votes http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-

    ----------------------------------------------------------------------------------------------------------------------

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard event viewer
    Windows. TIP - Options - Advanced filter allows you to see a time rather
    of the entire file.
    http://www.NirSoft.NET/utils/my_event_viewer.html

    Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
    info that would help. Such as ITC and 4 others entered at the bottom left. And all others
    error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during ' blue screen of the.
    death ' crashes and displays information about all accidents of a table.
    Free
    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by drivers of old or damaged, in particular the video drivers
    However, there are other causes.

    You can do mode if necessary safe or the Vista DVD command prompt or
    Options recovery if your system is installed by the manufacturer.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    You can try a system restore to a point before the problem started when one exists.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    -------------------------------------------------------------------------

    Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
    RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
    program generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Does not work
    tell all possible driver issues).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
    keyboard and mouse, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
    quit unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting, STOP error blue screen Vista
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    The Options or Vista recovery disk Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • Blue screen in Vista 7 just after the login screen

    We get a blue error screen 7th on Vista 64-bit SP1 right after the login screen appears.  The blue screen immediately goes, and system restarts (or sometimes just hangs).  I was not able to find the codes of the 7th in the research:

    (took a picture of the screen...)

    STOP: 0x0000007E (oxFFFFFFFFC0000005, 0xFFFFF80002325C87, 0xFFFFFA60165BE3E8, 0xFFFFFA60165BDDC0)

    I am able to boot in safe mode.  Do you have a chkdsk C: /F and which did not help.  Do you have a repair system using the Vista startup disk and that did not help.   Went to safe mode and MSCONFIG and position the clean boot and that did not help.  I tried to update to SP2 and unable to complete safe mode.

    The ideas and the sage advice would be greatly appreciated.

    Pete

    Hello

    Pick up the pieces after a computer breakdown - see what to do if Windows won't start correctly
    http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

    Check this thread for more information using BlueScreenView, MyEventViewer and other methods
    to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/blue-screen-plug-and-play-detected-an-error-most/3deab2fa-4000-4136-8c78-a3d22b1db009

    We can analyze the minidumps if make you it available from the OneDrive or other
    file     -sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
    for the office or in the Documents folder and download them from there.

    Adding files to your OneDrive
    http://Windows.Microsoft.com/en-us/Windows-8/getting-started-onedrive-tutorial

    A disk - sharing files and folders and change the permissions
    http://Windows.Microsoft.com/en-us/onedrive/share-file-folder

    ZIP or download the content of the C:\Windows\minidump

    Use OneDrive to upload collected files

    http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

    -------------------------------------------------------------------------

    Also this, so you can see the probable bluescreens.

    Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
    (also Windows 7)
    http://www.winvistatips.com/disable-automatic-restart-T84.html

    ===========================================================

    The system has RAID? If so, it's also very suspicious.

    This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
    may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
    can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
    methods in the next message and then return to the if necessary troubleshooting tool.

    Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
    Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
    spyware/security programs.

    When you get to the pilot and sections of the memory of the troubleshooter check the following message to
    update drivers and memory test and then return to the troubleshooter if necessary.

    ------------------------------------------------------------------

    BCCode: 7F 0x0000007E which is also 0x1000007E

    Bug Check 0x7E: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED

    Bug SYSTEM_THREAD_EXCEPTION_NOT_HANDLED control has a value of 0x0000007E. This bug check indicates that a system thread threw an exception that the error handler did not.

    Important info if you received a STOP Code

    If you received a blue error screen, or a stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.

    If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

    These actions could prevent a mistake like this does not happen:

    1. Download and install updates for your computer from Windows Update device drivers.
    2. Scan your computer for computer viruses.
    3. Check your hard drive for errors.

    SYSTEM_THREAD_EXCEPTION_NOT_HANDLED parameters

    The following settings appear on the blue screen.

    To view the settings, click on this link.
    http://msdn.Microsoft.com/en-us/library/ff559239 (v = VS. 85) .aspx

    CAUSE

    SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. TO
    interpret, you must identify which exception has been generated.

    Common exception codes are:

    • 0 x 80000002: STATUS_DATATYPE_MISALIGNMENT indicates an unaligned data reference was encountered.

    • 0 x 80000003: STATUS_BREAKPOINT indicates a breakpoint or ASSERTION was met when no kernel debugger was attached to the system.

    • 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.

    For a complete list of exception codes, see the Ntstatus.h file located in theinc directory
    the Microsoft Windows Driver Kit (WDK).

    Solve the problem

    If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

    • Make sure you have enough disk space.
    • If a driver is identified in the bug check message, disable the driver or check with the
    • Reference of the manufacturer for driver updates.
    • Try changing video cards.
    • Check with your hardware vendor for updates to the BIOS.
    • Disable the BIOS memory options such as implementing caching or shading.

    If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2
    (the address of the exception) must identify the driver or function that caused the problem.

    If the exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system
    has been launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly,
    Make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .

    In case of exception code 0 x 80000002, the trap frame provides additional information.

    If you do not know the specific cause of the exception, consider the following questions:

    • Hardware incompatibility. Make sure all new hardware that is installed is listed in the
    • List of Microsoft Windows Marketplace tested products.
    • Service driver or defective peripheral system. A service driver or defective peripheral system can be
    • responsible for this error. Hardware problems, such as the incompatibilities of the BIOS, memory, conflicts
    • and IRQ conflicts can also generate this error.

    If a driver is listed by name in the bug check message, disable or remove that driver. Disable
    or remove drivers or services that have been recently added. If the error occurs during startup
    sequence and the system partition is formatted with the NTFS file system, you may be able to use safe
    Mode to rename or to delete the faulty driver. If the driver is used as part of the system startup procedure
    in Safe Mode, you must start the computer by using the Recovery Console to access the file.

    If the problem is associated with Win32k.sys, the source of the error may be a third remote
    control program. If this software is installed, you can remove the boot of the computer service
    by using the Recovery Console, and then by removing the offending system service file.

    Check the system log in Event Viewer for additional error messages that might help identify the
    device or the driver that generated the bug check 0x7E.

    You can also disable memory cache BIOS may try to resolve the error. You should also
    Run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system.
    For more information about these procedures, see the manual of your computer.

    The error that generates this message may occur after the first reboot during Windows Setup, or
    Once the installation is complete. A possible cause of the error is lack of disk space for installation and system
    BIOS incompatibilities. For problems during the installation of Windows that are associated with the absence of disc
    space, reduce the number of files on the disk drive hard target. Find and delete any temporary
    the files that you do not have to have files hidden Internet, backup application and.chkfiles files that
    contain fragments of file saved to disk scans. You can also use another hard drive with more drive
    free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

    BCCode: 7F 0x00000007E who is also a 0x1000007E<-- read="" this="">
    * 1141.html? order = votes http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-

    ----------------------------------------------------------------------------------------------------------------------

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard event viewer
    Windows. TIP - Options - Advanced filter allows you to see a time rather
    of the entire file.
    http://www.NirSoft.NET/utils/my_event_viewer.html

    Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
    info that would help. Such as ITC and 4 others entered at the bottom left. And all others
    error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during ' blue screen of the.
    death ' crashes and displays information about all accidents of a table.
    Free
    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by drivers of old or damaged, in particular the video drivers
    However, there are other causes.

    You can do mode if necessary safe or the Vista DVD command prompt or
    Options recovery if your system is installed by the manufacturer.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    You can try a system restore to a point before the problem started when one exists.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    -------------------------------------------------------------------------

    Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
    RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
    program generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Does not work
    tell all possible driver issues).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
    keyboard and mouse, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
    quit unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting, STOP error blue screen Vista
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    The Options or Vista recovery disk Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Unable to start - blue screen STOP: 0X0000007E

    original title: STOP: 0X0000007E (0XC0000005, 0X89B16963, 0X8B76B87C, 0X8B76B578)

    I was working on my laptop Acer Aspire and suddenly my restarted windows and then leave her unable to start and just show a blue screen with the error code as STOP: 0X0000007E (0XC0000005, 0X89B16963, 0X8B76B87C, 0X8B76B578).

    I tried to run in safe mode, then even I tried all the options available in the Advanced menu to restart that we get after pressing F8 but just fails. Repair of the system showed the error Impossible to repair in the same way his unable to restore and unable to start with last successful boot setting.

    Kindly let me know what to do I have lots of important data in my hard drive that I don't want to lose.

    Hello

    Unless the drive itself is completely fried the data on disk can be recovered by putting the hard drive
    in another computer as 2nd or a case of external hard drive using a USB connection - then the data
    likely to be backed up or copied to other media.

    Of course, the major problem is that the system does not boot even in Safe Mode.

    Setup/settings (BIOS/CMOS) often F2 so screen shows that it boots CD/DVD on the 1st in the boot order-
    Start with a Windows 7 disc and try the Startup Repair tool. Also, try restoring the system from there. (Don't forget to)
    Set the boot order to when.)

    Those who cannot not helped at all and will need you the help of a real computer store (no leeks and)
    Displays a BestBuy or other stores) or system manufacturer support.

    =================================================================

    Here are the usual methods to troubleshoot the bluescreens if you have access to some and still have a
    problem.

    Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
    Troubleshoot the BlueScreens - top 3 answers.

    http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

    -----------------------------------------------------------------------------------------------------------------

    The system has RAID? If so, it is very suspicious.

    This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
    may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
    can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
    methods in the next message and then return to the if necessary troubleshooting tool.

    Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
    Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
    spyware/security programs.

    When you get to the pilot and sections of the memory of the troubleshooter check the following message to
    update drivers and memory test and then return to the troubleshooter if necessary.

    BCCode: 7F 0x0000007E which is also 0x1000007E

    Cause

    SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. TO
    interpret, you must identify which exception has been generated.

    Common exception codes are:

    • 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.

    For a complete list of exception codes, see the Ntstatus.h file located in theinc directory
    the Microsoft Windows Driver Kit (WDK).

    Solve the problem

    If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

    • Make sure you have enough disk space.
    • If a driver is identified in the bug check message, disable the driver or check with the
    • Reference of the manufacturer for driver updates.
    • Try changing video cards.
    • Check with your hardware vendor for updates to the BIOS.
    • Disable the BIOS memory options such as implementing caching or shading.

    If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2
    (the address of the exception) must identify the driver or function that caused the problem.

    If the exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system
    has been launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly,
    Make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .

    In case of exception code 0 x 80000002, the trap frame provides additional information.

    If you do not know the specific cause of the exception, consider the following questions:

    • Hardware incompatibility. Make sure all new hardware that is installed is listed in the
    • List of Microsoft Windows Marketplace tested products.
    • Service driver or defective peripheral system. A service driver or defective peripheral system can be
    • responsible for this error. Hardware problems, such as the incompatibilities of the BIOS, memory, conflicts
    • and IRQ conflicts can also generate this error.

    If a driver is listed by name in the bug check message, disable or remove that driver. Disable
    or remove drivers or services that have been recently added. If the error occurs during startup
    sequence and the system partition is formatted with the NTFS file system, you may be able to use safe
    Mode to rename or to delete the faulty driver. If the driver is used as part of the system startup procedure
    in Safe Mode, you must start the computer by using the Recovery Console to access the file.

    If the problem is associated with Win32k.sys, the source of the error may be a third remote
    control program. If this software is installed, you can remove the boot of the computer service
    by using the Recovery Console, and then by removing the offending system service file.

    Check the system log in Event Viewer for additional error messages that might help identify the
    device or the driver that generated the bug check 0x7E.

    You can also disable memory cache BIOS may try to resolve the error. You should also
    Run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system.
    For more information about these procedures, see the manual of your computer.

    The error that generates this message may occur after the first reboot during Windows Setup, or
    Once the installation is complete. A possible cause of the error is lack of disk space for installation and system
    BIOS incompatibilities. For problems during the installation of Windows that are associated with the absence of disc
    space, reduce the number of files on the disk drive hard target. Find and delete any temporary
    the files that you do not have to have files hidden Internet, backup application and.chkfiles files that
    contain fragments of file saved to disk scans. You can also use another hard drive with more drive
    free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

    BCCode: 7F 0x00000007E who is also a 0x1000007E<-- read="">
    * 1141.html? order = votes http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-
    -------------------------------------------------------------------------

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard event viewer
    Windows. TIP - Options - Advanced filter allows you to see a time rather
    of the entire file.
    http://www.NirSoft.NET/utils/my_event_viewer.html

    Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
    info that would help. Such as ITC and 4 others entered at the bottom left. And all others
    error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during ' blue screen of the.
    death ' crashes and displays information about all accidents of a table.
    Free
    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by drivers of old or damaged, in particular the video drivers
    However, there are other causes.

    You can do mode if necessary safe or the Vista DVD command prompt or
    Options recovery if your system is installed by the manufacturer.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    You can try a system restore to a point before the problem started when one exists.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    -------------------------------------------------------------------------

    Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
    RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
    program generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Does not work
    tell all possible driver issues).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
    keyboard and mouse, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
    quit unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting, STOP error blue screen Vista
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    The Options or Vista recovery disk Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • How a Windows error reports tire disorder - specifically the following code which resulted in a Blue Screen of Death?

    The blue screen of death occurred during online communication using a Logitech VID communications program. The following error report translated by:
    -Fault bucket 0x7E_lvrs. ReadWriteThread + 243, type 0
    Event name: BlueScreen
    Answer: no
    Cabin ID: 0

    Signature of the problem:
    P1:
    P2:
    P3:
    P4:
    P5:
    P6:
    P7:
    P8:
    P9:
    P10:

    Attached files:
    C:\Windows\Minidump\Mini013110-01.dmp
    C:\Users\Douglas\AppData\Local\Temp\WER-78015-0.SysData.XML
    C:\Users\Douglas\AppData\Local\Temp\WER7CDD.tmp.version.txt

    These files are available here:
    C:\ProgramData\Microsoft\Windows\WER\ReportArchive\Report0eeec72b
    Online from the best part of twenty minutes before it occurred. The two users of the
    program had the same result. (Blue screen of death) The two of us are running Windows Vista Ultimate Edition on motherboards model Intel D850EMVR with the latest bios update, Intel Pentium IV 3.06 Ghz, 533FSB CPUs, 2 GB of 168 pin memory of Samsung PC800 ECC, ATI AIW 9600XT 256 MB AGP video cards, Sound Blaster Audigy 2ZS with discs Live sound cards, ASB3940 Advansys SCSI adapters , Nakamichi5 disk SCSI MJ - 5.16 drives, Iomega SCSI ZIP 100 drives, and Lite on model SHM-165H6S DVD/CD rewritable EIDE drives. The two systems using model Logitech 9000 Pro webcam. (The two systems are essentially clones) Communication between Memphis, TN and Windsor, ON, CAN.

    Hello

    This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
    may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
    can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
    methods in the next message and then return to the if necessary troubleshooting tool.

    Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
    Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
    spyware/security programs.

    When you get to the pilot and sections of the memory of the troubleshooter check the following message to
    update drivers and memory test and then return to the troubleshooter if necessary.

    BCCode: 7F 0x0000007E

    Cause

    SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. To interpret it, you must identify which exception has been generated.

    Common exception codes are:

    • 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.

    For a complete list of exception codes, see the Ntstatus.h file located in the directory Inc. of the Microsoft Windows Driver Kit (WDK).

    Solve the problem

    If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

    • Make sure you have enough disk space.
    • If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
    • Try changing video cards.
    • Check with your hardware vendor for updates to the BIOS.
    • Disable the BIOS memory options such as implementing caching or shading.

    If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.

    If exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system was launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly, make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .

    In case of exception code 0 x 80000002, the trap frame provides additional information.

    If you do not know the specific cause of the exception, consider the following questions:

    • Hardware incompatibility. Ensure that any new hardware that is installed is listed in the list of the products tested Microsoft Windows market.
    • Service driver or defective peripheral system. A chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.

    If a driver is listed by name in the bug check message, disable or remove that driver. Disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.

    If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, you can remove the service by starting the computer by using the recovery and then Console by removing the offending system service file.

    Check the system log in Event Viewer for additional error messages that might help identify the device or driver responsible for control of bug 0x7E.

    You can also disable memory cache BIOS may try to resolve the error. You must also run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system. For more information about these procedures, see the manual of your computer.

    The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For any problems during the installation of Windows that are associated with lack of disk space, reduce the number of files on the hard disk drive target. Search and delete temporary files that you do not have to have, files hidden Internet, application backup files and files saved .chk , which contain fragments of files on disk scans. You can also use an another hard disk drive with more free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

    -------------------------------------------------------------------------

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
    TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
    http://www.NirSoft.NET/utils/my_event_viewer.html

    Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
    Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
    codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during "blue screen of death," collisions
    Displays information on all the "crash" of a table - free
    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

    You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
    system installed by the manufacturer.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    You can try a system restore to a point before the problem started when one exists.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    -------------------------------------------------------------------------

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
    smile, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting, STOP error blue screen Vista
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    The Options or Vista recovery disk Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • 0x0000007E... blue screen

    blue screen with the error 0x0000007E. can only get the command prompt into a loading platform vista drive in an acer computer and choosing Repair computer.  He is unable to fix. The person who owns the computer didn't have any records.  The drive is X: and C: is invalid.  Are unable to safe mode or any part of it.  Can get into setup and that's how I could access the command prompt from the gateway installation disc.  Finally got to see the disks and drive c is complete without free space and is recorded as 0 bytes.  Bad hard drive?

    Hello

    Of course, sounds like hard drive, controller or other materials.

    From the command prompt try one of these:

    Chkdsk /f /r

    sfc/scannow

    and system restore

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    If you go to F8 access you can try the last good known Configuration

    -------------------------------------------------------------------

    BCCode: 7F 0x0000007E

    Cause

    SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. To interpret it, you must identify which exception has been generated.

    Common exception codes are:

    • 0 x 80000002: STATUS_DATATYPE_MISALIGNMENT indicates an unaligned data reference was encountered.
    • 0 x 80000003: STATUS_BREAKPOINT indicates a breakpoint or ASSERTION was met when no kernel debugger was attached to the system.
    • 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.

    For a complete list of exception codes, see the Ntstatus.h file located in the directory Inc. of the Microsoft Windows Driver Kit (WDK).

    Solve the problem

    If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

    • Make sure you have enough disk space.
    • If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
    • Try changing video cards.
    • Check with your hardware vendor for updates to the BIOS.
    • Disable the BIOS memory options such as implementing caching or shading.

    If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.

    If exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system was launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly, make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .

    In case of exception code 0 x 80000002, the trap frame provides additional information.

    If you do not know the specific cause of the exception, consider the following questions:

    • Hardware incompatibility. Ensure that any new hardware that is installed is listed in the list of the products tested Microsoft Windows market.
    • Service driver or defective peripheral system. A chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.

    If a driver is listed by name in the bug check message, disable or remove that driver. Disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.

    If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, you can remove the service by starting the computer by using the recovery and then Console by removing the offending system service file.

    Check the system log in Event Viewer for additional error messages that might help identify the device or driver responsible for control of bug 0x7E.

    You can also disable memory cache BIOS may try to resolve the error. You must also run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system. For more information about these procedures, see the manual of your computer.

    The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For any problems during the installation of Windows that are associated with lack of disk space, reduce the number of files on the hard disk drive target. Search and delete temporary files that you do not have to have, files hidden Internet, application backup files and files saved .chk , which contain fragments of files on disk scans. You can also use an another hard disk drive with more free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

Maybe you are looking for