0x80004005: unspecified during decompression error
Specified above error code appears during decompression. Help, please.
TEEN Geek, of course, works, but then you will be forced to use a 3rd party for Zip files program in the future instead of the feature in Vista (which is easier to use). In addition, WinRar is shareware so that 7-Zip is a freeware, so you can choose the latter. You can fix the Vista zip functionality instead (or in addition):
Chances are good that some of Vista system files have become corrupt.
Then we will check some of your system files:
Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.
Type sfc/scannow, go and let it run. It will scan and try to correct some of your system files. If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.
While in the command prompt, type chkdsk /f /r and enter and let it run. It will scan and try to solve any corruption or bad sectors on your hard drive and remove especially as a cause.
If it does not, then thanks for posting any repetitive error messages in Event Viewer about zip files (Start / Control Panel / administrative tools / Event Viewer). Here's how to use Event Viewer: http://www.bleepingcomputer.com/forums/topic40108.html.
If this does not work, you will need to do a repair/system upgrade using the Windows Vista Installation disc authentic (you own or that you can borrow from someone). Here is the procedure: http://www.vistax64.com/tutorials/88236-repair-install-vista.html as well as the upgrade from an earlier version of the Windows section of the following: http://support.microsoft.com/kb/918884. Although this will not affect your data, settings or programs, you should always back up your data before you start just be on the safe side. If other procedures do not work, it is almost certain to work. You can have a lot of updates to re - install (including all you need to remove service packs). If the version on system with SP1 or SP2 preinstalled cane and the disc is an earlier version, then you will need to do a slipstream drive as follows: http://www.vistax64.com/tutorials/151606-vista-sp1-slipstream-installation-dvd.html.
I hope one of these procedures can solve your problem. If this isn't the case, after return and we will try something else. Return message anyway so we know how it turns out.
Good luck!
Lorien - a - MCSE/MCSA/network + / A +.
Tags: Windows
Similar Questions
-
: Error 0 × 80004005 Unspecified during extraction of zip file...
Original title: I face the error during extraction of zip file...
I face the error during extraction of zip file...
Win: 7
'An unexpected error prevents you from copying the file. If you continue to receive this error, you can use the error code to search for help with this problem.
"Error 0 × 80004005: unspecified error."What should I do to solve the problem?
THX in advance
You might check out the suggestions in the following thread.
http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-files/0x80004005-Unspecified-error-during-unzipping/28447609-6401-4F14-BF94-e0c8408051bbThank you
-
Cannot install OS - error-19235 xq199905 decompression error - 3
I have trouble getting my restore disk to work. I can get it insofar as the ghost screen installs approximately 7% of the image, then these error messages appear error-19235 xq199905 decompression error-3.
The same thing happens when I try to install Windows XP Home edition on a disk, it goes through to the copy of the files then keeps saying cannot copy file retry or ignore, this happens on all files. I tried a new HARD drive, but exactly the same thing happens.
Anyone out there can help me because I'm going crazy trying different configurations. I tried the new MBR, full format, new HARD drive, 2 different disks of WXP.
I've been around computers for 17 years and we never beat me but it made me.When I first tried to restore from the factory CD I had to disable the L2 cache before what I have explained.
Hope someone can find an answer.At soon Baztc
Hello
Very strange problem! Your service is very good, but from your description, maybe you should pay attention to the optical drive.
Recovery media, Microsoft Windows XP Home CD edition and disk HARD must be OK. Try somehow to install OS without ODD use (installation may be on LAN or WXP CD copy to the second partition).
It's really not easy to say what can be the problem.
-
0x80004005: unspecified error
In my laptop WLAN AutoConfig service does not work, whenever I try to start this service, it shows me the error as "Windows failed to start the service of autoconfiguration WLAN on Local computer. "Error 0 x 80004005: unspecified error." For this reason, my laptop can not display all wireless devices. Please give me the solution.
Hello
Make sure that you have downloaded and installed the latest drivers Wi - Fi for your laptop model and the operating system of the website of the manufacturer of the laptop.
Go to their site > drivers/software/Support Downloads Section > key in your model number and OS > download and install the Wi - Fi drivers for your operating system.
_________________________________________________
Also read the manual for the model that you should be able to download here, too.
_________________________________________________
"Wireless and wired network problems."
_________________________________________________
"How can I fix problems of network card?
http://Windows.Microsoft.com/en-AU/Windows/fix-network-adapter-problems#1TC=Windows-8
_________________________________________________
And some laptops have a physical switch to turn on Wi - fi.
http://www.computerhope.com/issues/ch001410.htm
Read under these different headers on the link above:
1. turn on with button laptop computer WiFi
2. turn on laptop with Fn and the function key
3. Activate in Windows
Note: In Windows 8, when you right-click on the icon of the Wi - Fi connection, check if the airplane Mode is on. If this is the case, disable to activate the wireless network card.
4 enable in Windows Device Manager.
5. Activate in the CMOS configuration
See you soon.
-
Hi, I bought a Wacom Intuos and it came with the software provided. Download of Photoshop kept in check the end (1000 MB + off 1012 mb!) and then when he finally said he had successfully downloaded, I get this error message when you try to extract the contents of the folder:
Can someone help me please? I have also contacted Wacom but they provide support for the software, what they bundle, of course. I'm also over my limit of 5 download because of the failure to download. I used download Ninja to help prevent failures, but it took 3 will get the full download.
If necessary I can ask them to renew my downloads again and try to download again. I can provide my serial key number to an Adobe representative if there is any way I can download the program directly shaped by using their program to download? There seems to be no way to speak directly to a customer service agent :-/
Congratulations Jess
exe looks like an incomplete download. If you are in doubt, check the size of the file.
Downloads available:
- Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
- Acrobat: XI, X | 9,8 | 9 standard
- Premiere Elements: 12 | 11, 10 | 9, 8, 7
- Photoshop Elements: 12 | 11, 10 | 9,8,7
- Lightroom: 5.6| 5 | 4 | 3
- Captivate: 8 | 7 | 6 | 5
- Contribute: CS5 | CS4, CS3
Download and installation help links Adobe
Help download and installation to Prodesigntools links can be found on the most linked pages. They are essential; especially steps 1, 2 and 3. If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".
-
Decompression error - now SOUL and first freeze during import
The person who gave me this sequence he compressed from an AVI file. I'm not very good with codecs and what not, so I hope that you all can point me in the right direction.
Playback is fine, just no imports. Other MP4s play and import correctly.
Current enforcement CS6 and just purchased QuickTime 7 Pro in hopes that it would be useful, but no luck. With the long list of InstalledCodecs (see report below), I hesitate to disable everything, because as I said I don't know which are which. I'd like to just re - install this scarf all OS and more and hope for the best - but I really just want you already work with this clip.
InstalledCodec report: http://www.secularuh.org/hosted/report.html
GSpot:
MediaInfo:
Complete name : C:UserstlowDocumentsEnvoyMPV2012_12RAWEnvoy Nov 2012_PGM_0001.mp4
Format : MPEG-PS
File size : 19.1 GiB
Duration : 26mn 26s
Overall bit rate mode : Variable
Overall bit rate : 104 Mbps
Video
ID : 224 (0xE0)
Format : MPEG Video
Format version : Version 2
Format profile : Main@High
Format settings, BVOP : No
Format settings, Matrix : Default
Format settings, GOP : N=1
Duration : 26mn 26s
Bit rate mode : Variable
Bit rate : 100.0 Mbps
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate : 29.970 fps
Standard : NTSC
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Interlaced
Scan order : Top Field First
Compression mode : Lossy
Bits/(Pixel*Frame) : 1.609
Stream size : 18.6 GiB (97%)
Audio #1
ID : 192 (0xC0)
Format : MPEG Audio
Format version : Version 1
Format profile : Layer 2
Duration : 26mn 26s
Bit rate mode : Constant
Bit rate : 384 Kbps
Channel(s) : 2 channels
Sampling rate : 48.0 KHz
Compression mode : Lossy
Stream size : 72.6 MiB (0%)
Audio #2
ID : 193 (0xC1)
Format : MPEG Audio
Format version : Version 1
Format profile : Layer 2
Duration : 26mn 26s
Bit rate mode : Constant
Bit rate : 384 Kbps
Channel(s) : 2 channels
Sampling rate : 48.0 KHz
Compression mode : Lossy
Stream size : 72.6 MiB (0%)I use it for the conversion of file problem. (Get 5, not the beta 6)
-
FPGA memory during construction errors...
I am building an FPGA application for a sbRIO-9636. I just added an element of memory to act as a circular buffer.
The element of memory is the size of 414000 U8 points. When I build, I get an error in the status of compilation window that starts like this.
«LabVIEW FPGA: compilation failed due to an error of Xilinx.»
Details:
ERROR: sim - user configuration exceeds the number of BRAM in the selected device
ERROR: sim:963 - initializer property intellectual could not set the basic model IP IP settings
ERROR: sim - user configuration exceeds the number of BRAM in the selected device
ERROR: sim - could not initialize the IP model.
ERROR: sim - generator execution failure of Tcl.
ERROR: sim - failed generation 'ReallyLongUniqueName_ReallyLongUniqueName '. Failed to run generator for Tcl.
ERROR: sim:877 - error detected during execution of intellectual property "block memory generator v7.3.
Release 14.7 - Xilinx CORE Generator P.20131013 (nt) Copyright (c) 1995-2013 Xilinx, Inc. All rights reserved.
I have attached the error any reading.
Help, please!
I just realized why I see this error. The sbRIO-9636 comes with 2 088 kbits of RAM block. I missread the quantity in 2 088 kbytes of RAM block, me wanting to use 414000 bytes will not work.
Thanks to all those who are looking into that.
-
Original title: XP hang up to the restoration of the system during the installation
During the configuration of the system in the process of getting XP to hung up on the screen of the system restore
The message says:No changes have been made to your computerTo choose another restore point, restart System RestoreTo restart System Restore, click HomeThe jury of the mouse and the button doesn't work so I can't click Home tabHelpHello
Why you try to run the system restore?
Step 1: Check if you are able to complete the restore of the system in safe mode.
Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.
Reference:
Using the event viewer
http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=trueUnderstanding of event viewer
http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=trueProcedure to view and manage event logs in Event Viewer in Windows XP
http://support.Microsoft.com/kb/308427For more information, please see the following article.
Steps of troubleshooting for problems when you try to use the System Restore tool in Windows XP
-
According to the API ActionScript 3.0, the ByteArray decompress method will decompress any data zlib compressed (ByteArray by selecting from the navigation bar on the left). But I get an error trying to unpack when I use data that has been compressed to zlib, but not by the ByteArray compress method (incoming data on a socket).
With a little more searching, I found a slightly different Flex 2 API, which specifies that the uncompress method will only work with data compressed by the compression method.
So the question is, can I decompress ANY compressed zlib or simply compressed data of flash?The ByteArray must have the stream integer zlib in memory to be able to decompress correctly. You can't leave the stream open and decompress a bit at a time (as you can with an inflating Java object).
If you have control of the zlib compression and you wish to close the stream, see the Z_FINISH indicator.
-
The connection has been reset during load error 101 help page
When loading some websites, all browsers and all computers, I get the following error message: "error 101 (ERR_CONNECTION_RESET net) connection was given to zero." & or: "the connection to the server was reset while the page is loading." Anyone know what this means?
I'm not having wit problems visiting the link you did.
The error message "the connection was reset" can be caused by a bug for the attack of the BEAST fix (browser exploit against SSL/TLS) that the server does not support.
-
Error during automatic error display enable management option is on
To display error messages do I need general error handler or simple to implement so I have automatic error enable handling on?
The two (possibly) displays a popup when an error occurs. The General error handler just has more options for special cases. The simple error handler is usually sufficient.
If you havce automatic error enabled, you will get a popup whenever a function generates an error AND the error output is not wired. Once wire you an error handler, the automatic error handling can no longer be.
To display an error, you can also simply place an ordinary error on front panel indicator. This avoids the annoying popup messages.
-
How to update or upgrade my computer without getting error code 80072efe. I have service Pack 2 installed, but I still get the error code, please help.
http://support.Microsoft.com/kb/836941
You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates
When you use the Windows Update Web site or the Microsoft Update Web site to search for and install updates, you may receive one of the following error messages:
Collapse this tableauAgrandir this tableError 0 x 80070008 Error 0x800705B4 Error 0x8007000E Error 0x80072EE2 Error 0x80072EFD Error 0x80072EE7 Error 0x80072EEF Error 0x80072EFE Error 0x8024400E Error 0x80072F76 Error 0 x 80244016 Error 0x80072F78 Error 0 x 80244022 Error 0 x 80090305 Error 0x8024402F Error 0x8009033F Error 0xC80003FA Error 0 x 80244008 Error 0xC800042D 0x8024400A error Error 0x80071A90 Error 0x8024400D If the above does not solve it:
Windows Update Forum:
It comes with Vista, upgrade install and activate Forum.
You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:
http://social.answers.Microsoft.com/forums/en-us/vistawu/threads
When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.
In this way, you will receive the best help.
See you soon
Mick Murphy - Microsoft partner
-
I ran properties/tools/error-check on a (regularly used to back up this PC XP) external HARD drive. After 2 days, error checking was still running and not even 1/3 way 4th Phase but I need PC. It was not possible to stop "Error Check" from the dialog box then I tried Task Manager/Applications, which said that nothing worked, so I turned off the PC.
When I restarted the PC, external HARD disk was not in my computer. Control Panel of configuration/addition does not see it no more. However, when I plug / unplug the station. HDD USB cable, the computer makes a noise and is also recognized in "Device safely Shut Down" as a USB storage device mass (but no drive letter). I tried to start/run/Cmd/Diskpart/List Disk and it is not listed.
NB. I checked the post. HARD drive on a Linux PC, which also does not detect not, then it is certainly the post. Drive HARD, not the XP PC.
Can offer you any advice?
Hello
· What is the number and the model of the hard drive?
As you mentioned that the issue isn't with the operating system but with the drive hard, for better support I suggest you to contact the manufacturer of the hard drive.
You can also get in touch with any local technician who can help you with the same.
-
Hello: My Media Center Program Guide is not download all the investigation tracks more and others me BITS service does not and I get the above error when I try to reboot via Control Panel. I am at a total loss about what to do now. Help, please.
Hello jessicanorthey,.
Try the article following that resets components Windows Update, including BITS.
Article number: 971058 - how to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
Let us know if that helps.Marilyn
-
XTRA Shockwave decompression error (I already downloaded FULL) absent
Hello, I have a problem when you try to play a game in Shockwave on the internet, I receive the error message, which can be seen in the image below:
Before telling you to download FULL version, I already downloaded, but the error continues, I know that the error is Swadcmpr.x32 file, I have already on my computer, but even in this case the error continues, what would it be?
Sorry my bad English, I'm from the Brazil
This game invites for backward compatibility components age. You will be prompted for an installation by trying to play.
Try to uninstall all versions of Shockwave on your computer, then download and run the MSI from this link
Maybe you are looking for
-
Question regarding the purchase of laptop wireless
Everything I've ever owned have been HP desktop computers. I need (well Yes, not desire) to buy a new laptop wireless. My intention to buy staples as I experience such great service in the past. Here are my questions: 1 at the present time, I have hi
-
can faulty monitor, someone help?
I bought my monitor 10 months ago, but in recent weeks his developed a fault and was referred to acer twice now and they have not repaired properly. Here telling me now that theres nothing wrong with it then ive made 3 videos and posted on youtube. W
-
Wish to no longer receive postmaster e-mail in Hotmail account.
Original title: Postmaster sends an e-mail. someone knows how to no longer receive e-mail from master in a hotmail account that you have not sent?
-
New hard drive and cloning Windows asking for the password and end the session
Hi all Need help please. I just bought a Cavior of WD 1 TB hard drive. I have used Norton Ghost to clone my old hard drive again. Then I removed the old hard drive and another to start the system. Currently, Windows XP was asked to enter the password
-
Adobe Flash Player has stopped working
Original title: Adobe Flash Player I get an error message of microsft windows, Adobe Flash player update service 11.6r602 has stopped working and was closed I use vista 32 bit home edition, and I'm in the United Kingdom. Can someone help me on how to