0x800700b7?

Similar Questions

• Laptop HP G42-303DX system restore error 0x800700B7

  I have a laptop HP, model G42-303DX, running Windows 7.

  When Windows tries to start, it displays the message: Windows Error Recovery / cannot start Windows.

  Then StartUpRepair launches and research about a minute for the problems.  Then it displays the message "Startup Repair cannot fix automatically.  I gave options: (1) sending info (can not since I can't it connect to the Internet) or (2) not to send (should I select).

  I click on Details of the issue and see the following:

  ProblemEvent name: StartUpRepairOffline

  Signature of the problem 01: 6.1.7600.16385

  Signature of the problem 02: 6.1.7600.16385

  Signature of the problem 03: unknown

  Signature of the 04:21200545 problem

  Signature of the problem 05: AutoFailover

  Signature of the problem 06:29

  Signature of the problem 07: corrupt the file

  The system version: 6.1.7600.2.0.0.256.1

  Locale ID: 1033

  The next screen to appear is: HP Recovery Manager

  I tried to do five different restorations, starting with the most recent restore point and working up.  All restore attempts failed.  In 3 of 5 attempts, I got the error code: 0x800700b7.  And in 2 of 5 attempts was the failure code: 0x8000ffff.

  I created a bootable (Kaspersky Rescue v10) DVD rescue disk and run a deep scan of 4 hours to check the virus, Trojans, etc, and it found nothing.

  When this laptop was purchased from Best Buys, we have not all discs.  I'm sorry to say that we did not create recovery disc.  I checked on the HP support site to order a set of recovery discs and can be found only for Windows 7 in the 64-bit version.  I don't know if this PC has been configured as a 32-bit or 64-bit machine.

  In addition, I use the Recovery Manager to create DVDs from backup files on that PC.  This problem started in December, and according to my daughter-in-law (the only user of that PC), it gave him no problems until this.

  I would REALLY appreciate any help on this... I'm a little at my wits end.

  Thank you

  Hello

  If you press F11 at startup, then it will take you to HP Recovery... .but recovery will reset the computer to factory

  Settings... Make sure you only have all backed up... If F11 did not help, then here is the link to order recovery disks for your

  System...

  DVD - Windows 7 64B + Supp 2 Recovery Kit ► Your system has Windows 7 Home Premium 64-bit installed on purchase... you can check the specifications of your system here... HP G42 - 303DX Notebook PC product specifications

• error 0x800700b7

  -Original Message-

  De : Germano

  To: Microsoft community

  Envoy: Thursday, April 25, 2013 20:00

  Topic: punto di ripristino

  -Original Message-

  De : Microsoft community

  To: * E-mail address is removed from the privacy *

  Envoy: Monday, April 22, 2013 17:02

  Topic: non posso fare punto di ripristino

  	REQUEST FREQUENTI SUL | PROFILO ACCOUNT
  Hello germanoO, The question knew Microsoft Community ha received una risposta: Domanda non posso fare punto di ripristino Risposta Good afternoon germanoO, Prova a seguire i passi seguenti: 1 change it percorso nel quale salvare it nuovo punto di ripristino creato. 2 Ridimensiona lo spazio di archiviazione massimo eseguendo it following comando, che può essere causato da uno spazio traffico: -click able to Start > all programs > Accessori > looping destro knew Prompt dei Comandi; -clicca Esegui come amministratore. -prompt of nel, digita it following comando e poi per dai: vssadmin list shadowstorage / for = c: 4 copiously it valore dello spazio di archiviazione massimo. 5 Nel Prompt dei Comandi, digita it following comando e dai per: vssadmin resize shadowstorage / for = c: / on = c: / MaxSize = 300 MB 6 as finestra del Prompt dei Comandi. FAI sapere, Buon proseguimento di day! Laura

  
  Grazie Gent - my Laura
  Unfortunately ho seguito questa strada senza successo gia
  Ho tried, following it consiglio, knew MVP di Leonardo Bai a clear sottochiave "WindowsBackup' e SC it PC.
  ORA it backup funziona mentre I punti di ripristino don't.
  MI, meglio: it automatically i punti di ripristino crea esprimo PC my non mi allows di ripristinare con a previous dicendomi punto "non Può creare a file is questo esiste gia error 0x800700B7»
  Questo e successo dopo aver labor-intensive da ed (following I consigli del producer) a couple of mesi fa, UN harddisck external da UN tera he nome di questo e della WD Mypassport.
  Nelle istruzioni TR viene invitati a download dal sito di programma UN della WD backup, cosa che ho fatto. Da what momento it PC delay not more backup
  e no ho potuto più UN punto previous ripristinare. Dopo aver disinstallato program ho cercato nei registri di clear all the voci locatie probabilmente MYpassport no, sono riuscito.
  MI viene it growth che, come ho letto sul web, che nel programma downloaded this sia che mi impedisce di disinstallarlo completely file
  Sorry the lunghezza spero di aver esposto bene it problema e sopratutto che you have help
  Gary Menotti
  Successivi Passaggi *.

  The ti risposta ha t a risolvere he problema? Information community.
  [Contrassegna risposta como slew]

  The risposta ti e stata useful? Fornisci UN feedback all'autore.
  [Vota come helpful]

  Only the sottoscrizione desideri a questo thread?
  . ISP click by andare al wire
  . Nel original post, click ISP known "changes."
  . Nella finestra di changes, deseleziona ' Invia th quando qualcuno nice a questo post.

  * Prima di tutto which insert the password, my una volta nel thread potrai stat che killed her operation e stata registrata automatically.
  Not answer directly a questo message. SE non hai made the entry o hai received message di questo posta elettronica per error ISP click which by rimuovere he message di posta elettronica inviato da Microsoft Community.
  Aggiorna impostazioni di posta elettronica . Informativa sulla privacy | Codice di Liveleak.com

  Hello

  See this page to select your language:

  http://support.Microsoft.com/common/international.aspx

  ====================================

  Or sorry that it is area English.

  Left click at the bottom of the Microsoft Community page

  English and set your language.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Dead Rising 2 "can't download the update" error code: 0X800700B7

  I jumped on Dead Rising 2 ready to play the game again, until I get a request for an update. I enthusiastically click Yes, and the update fails to download. I can no longer play the game.

  I tried to reinstall Games For Windows Live, rebooted the computer, nothing happens. I refuse to uninstall Dead Rising 2, because I don't want to wait five and a half hours just to make it work is not everywhere yet.

  Ive looked at the frequently asked questions on how to solve this problem and it seems that only solution did nothing to help. Any ideas?

  Error code: 0X800700B7

  I finally found how to solve this problem. It seems GFWL downloads actually update the file, but it does not install because he thinks that he didn't install it. To combat this manually I went in my folder XLIV and found the cab for Dead Rising 2 file and run the installer. It now works fine and I can play the game to my heart's content.

• Receive the error code 0x800700b7 during the Vista system restore

  Get the error code 0x800700b7 during the restoration of the system.
  "System restore failed due to an unspecified error. Cannot create a file when that file already exists. (0x800700b7).

  I have a Dell laptop, Studio, running on Vista.  I just installed some Windows updates (ALWAYS a hassle!) and restarted the system.  Failed to start,

  I tried:
  (7 times) Startup Repair
  System Restore (at least 7 times - try them different restore points to restore the system, going back to mid-May
  Trying to reboot without doing anything

  The error message persists.   I can't boot the system in safe mode, so I'm not able to disable the antivirus software or go to start or anything else.  Windows does not start. Y at - it a fix for this error message?
  Help!

  I managed to fix it on my own over the weekend. In Safe Mode, disabled Norton and also downloaded a tool that Norton offers to help solve the problems of this kind.  The tool worked and my laptop works fine now. The update of Java was the problem - I don't allow anything not my automatic update system, but Java auto-updated anti-virus Norton was on.

• Cannot run the Windows backup utility, error: "a file already exists (0X800700B7)."

  I have a Lenovo Think Pad with Windows Vista.  When I try to back up the computer, I choose backup and the location of tools accessory system configuration.  Then I run a backup to start and identify a DVD RW as the location of the backup files.  I click to start and a screen pops up saying

  A file exists already (0X800700B7), and at this time it cannot be saved.

  OX800700B7 is not a file name. It is an error code.

  What follows is a response to the same problem. The person who had the problem was using 64-bit. But that makes no difference in this case. Follow th step by step posted by ABC_george and see if that fixes the problem.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/Windows-backup-cannot-create-a-file-when-that-file/d91d7785-9a00-4b26-9ae3-ae35b0d9317b

• No flashes of backup code 0x800700B7 files

  First of all, could not make a backup don't code 0 X 80041321, followed by the steps by a code now reads this file already exists 0x800700B7 code?  I need less complicated as possible lol. IM new to all this! Thank you very much!!

  Hello

  make backups on an external hard drive or DVD

  see if this information helps you

  How to make a backup of your data

  http://www.vista4beginners.com/how-to-backup-your-data

  How to restore your files

  http://www.vista4beginners.com/how-to-restore-files

  the 1st link below is how do the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  and that is how do to recover the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial144.html

  If you have problems, it's in here is a forum for microsoft specifically for backup issues

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

• Get 0x800700B7 error code when you try to create a system restore point.

  Original title: could not create a system restore point.

  Running Windows Vista and trying to set system restore point in System Properties System Protection. Receive, "cannot... file already exests...» 0x800700B7. what I'm doing wrong or not done? Be nice... I am a Virgin computer! LOL PS - the laptop is a hand me down and contaminated by _:)

  Do not know what measures allowing you to create restore point.

  Here is the step by step:

  Start button > in the search box, type backup and Restore Center > press the Enter key > left column > click on create a Restore Point or change settings > wait > in the window system properties, put a stop to the OS (c :)) (System) > click the button create near the bottom right > the rest should be self-explanatory.)

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• 0x800700B7 error during backup of Windows 7 (64-bit)

  Windows 7 Ultimate 64-bit on Dell XPS 8500.  Out of nowhere, run recent backup (made daily) supported my documents very well, but when he started the operating system image, he spits 0X800800B7 error and could not complete the backup.  Several attempts produced the same results.

  Ran SFC.exe, found nothing.  Tried proposed the deletion of the Windows backup folder into the "HKEY_Local_Machine\software\Microsoft\windowsNT\currentversion\schedule\taskcache\tree\Microsoft\windows" location; " fresh backup attempt and the system ran very well until he finished "My Documents" and began to create an operating system image when it chased new 0x800700B7 and stopped the back upward.

  At this point, I can't get the backup system.  Any suggestion would be appreciated.

  Hello

  You can perform the check disk on the external hard drive and check if contributing to the backup.

  Check a drive for errors: http://windows.microsoft.com/en-us/windows7/check-a-drive-for-errors

  Important: while performing the check disk on the hard disk, if bad sectors can be found, then check disk will try to repair this sector. All the data available in this area may be lost.

  Response with the State to help you further.

• How to fix 0x800700b7 for windows error code 8

  I was wondering what I should do to fix the error 0x800700b7 code?

  I also have the same error when you try to update Skype and install other applications on a second user of a fresh windows 8. Windows8 reinstalled twice now. None of the proposed approaches seem to work yet.

• Problem: My computer hangs and does not restart after the installation of MS Update KB2479628.

  Tuesday February 11 I turned my hp Compaq nx7300 off I saw that she was installing updates I thought that nothing of what I had set to automatic updates. On Wedndesday that I have tried to re - turn on my laptop it installed updates. I got a black screen with white writing. The laptop then ran restoration of boot, but he was not able to repair itself and turns off. I tried to turn it back on a few times that I was in total disbelief that a MS Update would do this to my computer, it still does not.

  I tried to start the computer in safe mode, but it does not work.

  I tried to do a system restore but evertime I tried it there was an error, I tried all eight restore points but all back "an unspecified error occurred during system 0x800700b7 restore.

  "In restoration of start I clicked on ' view diagnostic and repair details" it said all tests have been performed with success, but at the bottom it says ' root cause found - boot critical file D:\Windows\system32\ntkrnlpa.exe is corrupt.

  I had to reinstall windows 7 pro three times so far and have now developed to the point that it is KB2479628 update of MS that is causing the problem. I the have not installed this time and have had updates to the manual

  What can I do about this problem, I spent at least 20 hours on this problem now, and looking for the many other forum of people seem to have similar problems. I'm worried that KB2479628 will settle by accident when I want to install some other updates?

  My computer laptop originally had Vista Business top but has been upgraded to Windows 7 32 bit, clean install, I use Microsoft Security Essentials, I've never had installed norton or macafee.

  Thank you very much for all your time and your help is greatly appreciated, I'm sure I'll be at the time when SP1 is available.

  Until then your your :-)

• Black screen with blinking cursor! tried everything!

  OK, so this is going to sound familiar.

  I was on my computer when (it seems that windows update force rebooted my system) my computer rebooted in the middle of doing me stuff, got the windows stop screen.  When it restarts I got was a black screen with a blinking cursor.  The only options on the splash screen that works are the program installation, diagnosis and menu start. For some reason, hit F11 to restore the system does nothing and it will pass just to the black screen. Another strange note is that simply type the power button it will stop, I don't need to keep it.

  (1) I went into the bios and restored the default values.

  (2) I called they sent me a microsoft repair disc.

  (3) I tried the Startup Repair, which would have finished enough instantly and tell me that no problem has been detected and if I recently fixed a device, remove and restart. Everything is attached are the mouse/keyboard factory.
  (4) I've tried many system restore points and they all failed. nothing has worked and all generated the error: (0x800700b7)
  (5) I made this

  Bootrec.exe

  bcdedit/export C:\BCD_Backup

  c:

  Boot CD

  BCD attrib s h - r

  Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  Bootrec /fixmbr

  Bootrec /fixboot

  When the pc still doesn't load, I put the repair back disc in and got an error message windows boot files where invalid and had the ability to repair and restart or cancel.  After trying blaze these and try several BCD I built always get the same flashing cursor.

  (6) I reloaded windows on a separate hard drive and scanned all viruses, checked the drive to see if there was even loaded windows (out of curiosity because nothing works)

  (7) so everything is saved, but I have 5 years of programming, I don't want to lose or reload due to the download time.

  Is there anything I can try that will work?

  Windows 7 64 bit

  HP Pavilion AMD phenom processor 4 cores.

  motherboard, power supply, gpu, amd chip, all works with a different hard drive, but I really really really don't want a fresh reload

  Please haaalllppp

  Hello

  Try Rescue Kit Free Edition of Paragon.  Review its main features here.

• Windows 7 (64) Premium family edition

  When you make the last Windows Update for Windows 7 (64); the update will install, but when start the Windows machine indicates that the update cannot be configured and revert to the previous version.

  When I try to go back to a previous version of restoration (several attempts) I get the error code: 0x800700b7.

  Someone at - it advice?

  Thank you

  When I try to go back to a previous version of restoration (several attempts) I get the error code: 0x800700b7.

  Some info here: http://social.answers.microsoft.com/Forums/en-US/w7repair/thread/59cfdf5b-4fa8-4efa-8bdd-e5f6fdf0116c

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Update of software and applications

  I'm having a problem that continues to get my software apps and windows updates. I bought 2, PC laptop Compaq CQ58-bf9WM yesterday and began the process of update of preinstalled applications and keep for the lack of updates to the window 12 and they all. For the most part when it fails it gives me the error 0x800700b7 code no matter how many times I try again, it remains to fail. For Windows updates, I started just to be stuck in a update screen where it goes to 12% that remains for about maybe 10-15 minutes that restarts and recurrence. At the time where the update was "placed" an hour had already passed, checked to see if everything was good and updated, but the said installation failed. I don't know what the problem is with my laptop, the other is updated without any problems. I have a factory warranty, but do not want to use at the only up to what all else fails. Its 8 Windows running. Help, please.

  This is what MS recommends to do in this case where usually a services of a company of 3er party is stop your update process.

  Step 1:

  (a) press "Windows + R" on the keyboard.

  (b) in 'Run' windows type "MSCONFIG" and click 'Ok'.

  (c) click on the "Startup" tab and uncheck the "Safe Boot" option.

  (d) on the 'Général' tab, select the "Selective startup"option, and then click to clear the Load Startup items check box option.

  (e) on the 'Services' tab, click to select the checkbox "Hide all Microsoft services" and then click on 'Disable all'.

  (f) in the "Startup" tab, click on 'Open the Task Manager '. In the window Task Manager on tab startup, right-click on each item to boot that are enabled, and then select 'disable '.

  (g) click on 'OK'and then click on restart.

  Step 2: Enable half the services

  a. follow steps 1a and 1B to start the System Configuration utility.

  b. click on the Services tab and then click to select the hide all Microsoft services check box.

  c. Click to select half of the check boxes in the Service list.

  d. click OKand then click restart.

  Step 3: Determine whether the problem returns

  If the problem persists, repeat steps 1 and 2. In step 2, click to clear half of the check boxes that you have initially enabled in the Service list.

  If the problem does not occur, repeat steps 1 and 2. In step 2, select only half of the remaining check boxes that are cleared in the Service list. Repeat these steps until you have selected all the check boxes.

  If only one service is selected in the list of services , and you the problem persists, the service selected the cause of the problem. Go to step 6. If no service is causing this problem, go to step 4.

  Step 4: Enable half of the startup items

  If no startup item causes this problem, a Microsoft service most likely the cause of the problem. To determine which Microsoft service may be causing the problem, repeat step 1 and step 2 without selecting the hide all Microsoft services check box in each step.

  Step 5: Determine whether the problem returns

  If the problem persists, repeat steps 1 and 4. In step 4, click to clear half of the check boxes that you have originally selected in the startup item list.

  If the problem does not occur, repeat steps 1 and 4. In step 4, select only half of the remaining check boxes that are cleared in the startup item list. Repeat these steps until you have selected all the check boxes.

  If only one startup item is selected in the startup item list, and you still experience the problem, start selected in the list element is the service that is causing the problem. Go to step 6.

  If no startup item causes this problem, a Microsoft service most likely the cause of the problem. To determine which Microsoft service may be causing the problem, repeat step 1 and step 2 without selecting the hide all Microsoft services check box in each step.

  Step 6: Resolve the problem

  After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved. Or, run the System Configuration utility, and then click to clear the check box of the element of the problem.

  Step 7:

  Note: When you have finished troubleshooting, follow these steps to start the normal start.

  (a) press "Windows + R" on the keyboard.

  (b) in 'Run' windows type "MSCONFIG" and click 'Ok'.

  (c) on the "Général" tab, click "Normal startup" option, and then click on 'OK'.

  (d) when you are prompted to restart the computer, click "Restart".

• Unable to create restore point. Vista64. Could not create the scheduled task for the following reason: cannot create a file when that file already exists

  RAID 5 obtained corrupte had to rebuild after that can't create system restore point. Tried everything sfc, fsutil, Dungeon SystemPropertiesProtection screen displaying this error: "could not create the scheduled task for the following reason: cannot create a file when that file already exists." (0x800700B7)"system of work in all other respects. SFC says it found and fixed errors every time I run it.

  Fix tried Della Li: Please remove the WindowsBackup folder in the HKEY_LOCAL_MACHINE NT\CurrentVersion\Schedule\TaskCache\Tree\Microsoft\Windows.

  Delete the WINDOWS BACKUP folder. Unfortunately this folder does not exist.

  Checked VSS, Taskscheduler and other services are runnig

  Tried to boot from the CD and widowed revover. Says no problems. The error to any manulation of the checkbox in the properties of the system, the system protection screen

  Solved

  It turns out that task scheduler got corrupted it have several tasks Scheduler said were not available, but are still in the working directory. These tasks especially SR from compensation directory solved the problem and I can now create backup points.