0xC0000225

Similar Questions

• "Situation: 0xc0000225" error starting in Windows 7

  Windows Boot Manager
  
  Windows could not start. A recent hardware or software change might be the cause. To solve the problem:
  1. Insert your Windows installation disc and restart your computer.
  
  2. choose your language settings, and then click "next".
  
  3. click on "Repair your computer."
  If you do not have the disk, contact your system administrator or computer manufacturer for assistance
  Situation: 0xc0000225
  Info: An unexpected error has occurred
  
  ----------------------------------
  I have a HP Envy laptop without cd rom. Please let me know how to solve this problem. I don't have a recovery boot disk,
  
  

  Hello

  You can find your page notebooks driver for Windows 7 64 bit on this link.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063 & LC = on & CC = US & DLC = in & sw_lang = & Product = 5273121

  Note:  The Beats audio interface is installed by the IDT HD Audio software.

  Kind regards

  DP - K

• HP pavilion 2777TU g6: downgrading Windows 10 to 8.1 showed a 0xc0000225 error. How to recover without data loss?

  I had upgraded to windows 10 8.1 about 20 days back, but now I don't like the outlook and my system also became slow so I thought to go back to windows 8.1. My laptop gives error 0xc0000225. Please help urgently.

  Kkss

  While Microsoft says there is no risk in the upgrade of Win10, because they allow you to believe that you can always return to your BONES and the original installation program within 30 days, the ugly fact of the matter is that the Win10 GoBack feature turned out to be unreliable - and when she fails, she can let machines in a State corrupted - that does not always happen , but it happens often enough to be a problem and you will get no warning beforehand that he goes to the trash your PC!
  
  If this is not enough, the Win10 upgrade is known, in some cases, corrupt partition recovery stored by the OEM that built the original machine. It's pretty much guarantee that no HP recovery will work.

  You should probably use HP recovery media to restore your PC to its original state, and you will have to order from HP.

• Startup error code: 0xc0000225.

  After restarting my laptop once, windows 7 just sitting in either a screen empty or sitting at the "Starting Windows" screen.

  I restarted my laptop and receives the status code: 0xc0000225 and then told to launch the repair from the installation disc.

  I have created a disk of my office repair, inserted into the laptop, and now he can't seem to recognize the repair disk, always encouraging me to insert it.

  So now do I track down an installation disc to see if that is different from the repair disk, or is there something else I can do?

  Here is an image of the error screen: http://imgur.com/wEUBqfQ

  It's on a Pavilion dv7.

  Thank you

  Hi Clauy,

  Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I saw your message with the error on booting. From my research, it seems that need you an installation disc if the repair disk does not work. I found only a few detailed steps on this problem of fixing on this third-party site. They double boots of origin displays with Linux, but you can just skip this part. The repair disc, you have created the exact same operating system of Windows 7? For example, you do not need to use a Windows 7 Basic to repair a Windows 7 Home Premium.

  Thank you

• Media recovery NB200 0xc0000225 error

  Toshiba NB200 part number PLL28A-007012. (Windows 7 starter edition)

  Using Recovery Media Creator of Win7 and written to a Sandisk Cruzer Titanium 8 GB USB drive.
  The Recovery Media Creator works and completes the task without mistakes.
  After you change the USB boot first sequence, the PC starts on the 8 GB USB key and almost immediately stops and it shows on the screen:
  __________________________________________________ _____________________________
  Windows could not start. A recent hardware or software change might be the cause. To solve the problem:
  1. Insert your windows installation disc and restart your computer.
  2. choose your language setting and then click "next".
  3. click on "repair your computer."

  If you do not have this disc contact your computer manufacturer or sys admin.

  File: \Boot\BCD
  Situation: 0xc0000225
  Info: An error occurred trying to read the boot configuration data.
  __________________________________________________ _____________________________

  I tried using the Recovery Media Creator twice on the same USB drive with the same result both times.
  The USB has been emptied before each creation.

  So, the problem is, the USB recovery media does not start because of the error 0xc0000225.
  Could someone please offer a solution to this problem?

  Thank you very much

  Hello

  I've never tried the recovery from a USB key, but you can try another? Maybe the stick isn't compatible

  From my own experience, I can say that not all DVD media are compatible. I made good experiences with 1-2 manufactured products.

  By the way: you can try the recovery of the DVD?

• Satellite L50 - A - 1 c 7 won't start plus-erreur 0xc0000225

  Hello

  I had a 128 GB ssd in my laptop (hard disk enclosure) and 1 TB of toshiba hard drive but now I got a new pc and the ssd's in the Office
  now I want to reinstall windows on my laptop but I still have this error 0xc0000225

  I have the recovery cd and a bootable usb key but even when I change the boot order, that I continue to have this error, there is also an option to press f8 but when I do this the screen flashes

  can someone help me?

  laptop: toshiba satellite l50 - a - 1 c 7

  now, I've discovered that my hard drive (it came with my laptop) was originally

  now I have just an ssd in my laptop but now I got this screen:

  check for the presence of media
  no media present

  After a time: he transforms:

  Restart and select proper boot device or insert boot media in selected boot device and press a key

  I have a bootable usb key but I can't go into the bios boot device set.
  normally I go in the bios when I Press f4 but nothing happens, then I restart the laptop goes into the bios, but it freezes and cannot do anything about it.

  If anyone can help me?

  Thank you

• HP Envy 17: 0xc0000225 error code won't BOOT HP ENVY 17

  Trying to turn on, get the Error Message:

  0xc0000225 error code

  Your PC could not start properly

  The NEW blue screen of death!

  The computer was loaded just a few Microsoft updates last night before stopping.

  10 64-bit Windows

  Where do we go from here?

  The error code and the situation are not addressed by Microsoft and hours of work-around so did not work.  Recovery disk was ineffective as a myriad of Internet solutions.

  I had to buy a CD of Windows 10 for $150, and enter the BIOS to boot from the CD Ms.  Once I had the opening screen, I selected "REPAIR".  2.5 HOURS later, I was back to and all running programs.

  MS scammed me once again... Thank you Bill Gates!

  SDJL THANKS for the reply.

• HP 15 AC121dx Touch: Error 0xc0000225

  I get the error message: required is not connected code 0xc0000225 and the next error message I get is: 0xc00000f. I can't start my HP computer without these errors showing. Not even in SafeMode ENCs, this has happened with the last update a few days ago... Help, please. Computer bought the 17/09/2015 of Best Buy. Help, please.  Thank you

  I want to thank you for your support. The problem has been resolved. I contacted HP by phone and sent a restore disc. Everything is working now and the error has been corrected.

• error 0xC0000225, recovery partition does not start

  Hello

  I have a HP dv7 with Windows 7 Home premium 64-bit.

  A few months ago, I did a factory restore, the recovery partition start (I have no recovery disks). After that, I thought to divide my C: partition where Windows is installed, and I did it with Windows disk management.

  So my new scores were: C: D: with recovery, OS, E: HP_Tools and g.: the new partition.

  A few days ago the sistem ran very hard, so I thought I do another factory restore from the recovery partition. When I rebooted and you press F11, I got the "0xc0000225 error".

  I have a Windows 7 Home Premium 64-bit bootable drive and I tried Startup Repair tool and other repairs of sistem, checks HDD, but everything seems to be ok.

  I reinstalled the operating system, from the disk bootable on C: (OS starts and works well) and let the other partitions as they were... but it seems that the recovery partition still does not start if I can do a restore from the factory with all the drivers and utilities, as they were at the beginning.

  Any ideas on how I can do?

  Thank you!

  It seemed that it there was not much I could do about this problem. My disk is dynamic, there is no Recovery Manager from the Start Menu, there has not been any creation of HP with HP folder recovery support. I managed somehow to make a repair disk, I tried it but no results, the error kept popping out every time.

  I inserted the Windows 7 disc to try to delete all partitions, including the recovery and HP-tools and do a Windows Installer Cleanup, but the Format, New and Delete buttons are inactive.

  I did some scans disk and memory tests, everything was ok... I started with a disc of Hiren and accesed the HARD drive with a program based on linux and so I managed to delete the partitions.

  After I installed a new copy of Windows 7 to work with my SN and everything was ok. Unfortunately I lost partitions recovery and HP-tools, but at least it works well again.

  Thanks for your all your support.

• HP 250 Portable G2: 0xc0000225 error code. Hard drive is not accessible, computer laptop HP 250 G2

  I'm doing a clean Windows 8.1 64-bit as a result of a fall, but I'm getting 0xc0000225 error code, using built-in HP recovery utility. Installing Windows also says: Windows could not retrieve information about the disks on this computer. Kindly help. Thank you

  If your computer is originally shipped with Windows preinstalled by HP (as it should) - it would be better to use the HP recovery media that will repair Windows, applications, and all the default partition to factory. It will use the license of your machine for Windows and should automatically active Windows after installation.

  If you are using the 8.1 Windows installation media, you may need a facility to post license Win (depending on the type of used windows).

  -If you want to use the original that are preinstalled windows, you can get a HP recovery media as described above

  -If you are using the 8.1 Windows installation disc and install Windows from using your driver's license, follow these steps:

  1 boot from the Windows DVD
  2. click on install now
  3. in the configuration screen, click Custom (Advanced)
  4. click on Drive Options
  5. Select the partitions to format
  6. click on Format - this will delete EVERYTHING on this partition - format and delete all partitions
  7. create a new partition, and then select a partition to install Windows on.
  8. continue the installation.

  If the Windows installation disc does not work for the above you can do the following to reformat your hard drive:
  1. download a Gparted ISO from here:
  http://gparted.org/LiveCD.php

  2 burn the ISO to a CD or DVD
  2. start from the CD/DVD of Gparted disk.
  3. use Gparted to delete all partitions on the hard disk.
  4. under 'Device' choose Create Partition Table to a new table partition.
  5. create a NTFS partition (or you can wait and create a partition during the installation of Windows).

  Finally, boot from the Windows installation disc and install Windows.

  Let me know if it works for you

• Status of Boot\BCD 0xc0000225. Error

  I write because I also have the same problem with my laptop as U. I have a laptop Hp G6 and I just shrunk my C drive after a take-over of the factory... and later I can´t get in my laptop because the error: file: \Boot\BCD 0xc0000225 status. Please could you help me with this? How did solve you your problem. Thank you very much.
  
  Please answer me as soon as possible

  Press F8 at startup to appear the WinRE and select "repair your computer".  On the menu next, open a command prompt and type in the following:

  Bootrec /rebuildbcd

  and press ENTER.  If you are asked about the installations of windows, select 'Y' or 'A '.  After that, you should be able to boot into windows.

• Where is the serial number 6-1091TX? + 0xc0000225 error

  OK, I've encountered a problem and girlfriends laptop won't start.

  It happens with 0xc0000225 error in Windows Boot Manager, I have as he asked and placed a USB bootable with Windows 8.1 in the port and pushed enter to continue. Loop it back to this page.

  1. I can't select boot device options. No option to boot from USB because it just doesn't go to this screen of BBE.

  2. product diagnosis system * removed *.

  3. I do not have access to a HP USB recovery or something else. I also can't create one as there isn't one on the 6-1091TX page.

  4. I formatted from the 500 GB drive and the disk chkdsk and it works fine

  5. I used the partition of 32 GB of SSD mSATA and it was in the GPT format with 8.1 64bits

  6. I've searched all over the web and have not found a solution

  Also how can I do to find the serial number. I walked about all combinations, read every guide, but the numbers and formats are different and it's getting frustrating, using both the * removed * and looking at the * removed * I cant get support until I get the serial number, and then he told me to contact HP with no contact information.

  Any help would be much appreciated

  Fixed it myself. Took out the HARD drive and it starts in mSATA SSD with Win 8.1 with none of the drama. Reconnected it hotswapping, formatted as a primary partition, the installer on the disk HARD not restarted and now it works.

  We both learned something new today.

• Window 8.1 OS error 0xc0000225

  Hello

  Please help me this error in win OS 8.1.

  my lappy specification are:

  Product model: HP Pavilion Notebook 15-n209tx

  Product number: F6C49PA

  Error... 0xC0000225

  

  Hi HlmanshuV,

  Welcome to the Forums of HP Support!

  I understand that you have found an error 0xc0000225 on your HP Pavilion 15-n209tx Notebook PC. I'll try my best to help you solve this problem.

  Here is a document for know how to repair 0xc0000225 error at startup to point 8.1 of Windows with steps on how to repair this error.

  I'm also including this document for error: the boot selection failed because a required device is inaccessible (Windows 7, 8) which explains how to test the hard drive and how to do a system restore.

  I hope that this information help, please let me know how it goes.

  Thank you and have a great day!

• Pavilion G6 does not (Win7). Boot\BCD error, status 0xc0000225

  Hello

  My 4 month old Pavilion G6-2155sf cannot start. Normal start-up it is just stuck on the windows logo.

  If I press F11 I get this message:

  "Unable to start Windows. A recent hardware or software change might be the
  cause. To solve the problem:

  1. Insert your Windows installation disc and restart your computer.
  2. choose your language settings, and then click "next".
  3. click on "Repair your computer."

  If you do not have the disk, contact your system administrator or your computer
  manufacturer for assistance.

  File: \Boot\BCD

  Situation: 0xc0000225

  Info: an error occurred trying to read the boot configuration data. »

  Also, after pressing F2, I did a quick test drive and I got this result:
  DST short: FAILURE

  I'm off to my memory of end of study, internship next week and this computer is my tool, please help me

  Thank you for your time,

  Guillaume Belouch

  PS: No modification/installation of software or material or anything like that was made last week. Also computer had no access to the internet for a week, so I doubt that it can be a virus.

  P/N: B7G02EA #ABF

  S/N: {removed privacy}

  Windows 7

  Hello

  Unfortunately it would look as the volume is indeed corrupt, which coupled with the error of the DST, would tend to confirm that the drive has indeed failed.

  Now my best suggestion would be to contact HP immediately and get the HARD drive replaced under warranty - make sure you always have a set of recovery discs/media to reinstall the operating system on the new drive, if you have not, you should be able to order it at the same time.

  Kind regards

  DP - K

• error 0xc0000225 windows does not start

  Hello everyone
  I have a sony vaio, vista edition windows Home premium and basically my computer was working fine and all of a sudden it went away, and when I restarted it, directly, he went in the windows startup repair options and not fix the problem in the automatic startup repair, I tried several times but every time that I restarted , it would show windows loading files and go directly into the startup repair options.
  After that I followed instructions online via the command prompt and type bootrec.exe, and rebuild the boot or something (sorry iam seriously technically incompetent) and now all the that I get whenever I start my compputer is a black screen saying
  "Could not start windows, a recent hardware or software change might be the cause. to solve the problem
  1. Insert your windows installation cd, and then restart your computer
  2. choose your language settings, and then click Next
  3. click on repair your computer

  except that I don't have my cd of vista so iam basically screwed, the page reads as
  file: \windows\system32\drivers\qzgvarw.sys
  situation: 0xc0000225
  Info: Failed to load because a critical windows system driver is missing or corrupt

  so I really need someone's help because I have so much my proffesional work on my hard drive and I can't reformat everything because I do not have a backup, I also have a partition on my hard drive is in any way I can transfer important files from my hardrive to my other OS?
  Please help, panic here!

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  See you soon.

  Mick Murphy - Microsoft partner