1 problem and 1 Question

Similar Questions

• Video problems and a green screen

  Hello

  I read the questions and answers on this topic, but some things work and others do not.  For example, I was able to solve one of my problems with some other fixes I found through online forums General for the 'green' screen that plays with the audio only.  It seems to work for me on you tube but not on Facebook more videos alhtough Facebook worked the first time when I rebooted.

  What I did get into my internet options and under accelerated graphics that I checked use software rendering instead of...

  and on the Security tab, I checked activate 64-bit processes in increased protected...  It Enhanced protected mode should as well then?  Should I check this option.

  I also treid to do what the responses recommended... as a right click on the video on Facebook when he plays and then I get a pop up I get the settings options or global settings and adobe flash player info... by clicking on settings gives me options but none for "screen", only for my microphone, camera and storage.  If I click on global settings, need me to flash player help.  And the last option, I get my version of Adobe info, which is version 13.00.214.  So no option to uncheck the box disable accelerated graphics cause I think I already did this in Control Panel.

  But why is working with youtube and videos from Facebook that I also tried to play videos as wmv and other video files files in my windows media player flash and then I get a screen black but still audio not play now.

  My computer is a HP Pavilion Notebook PC and it came with Windows already installed 8.1.  My graphics card is a Radeon R5 AMD graphics card.

  So what the devil now.  Should I install more recent Adode Player?  Even by unchecking the option graphis accelerated, this isn't really a solution for the deeper problem and the question, because then it slows down your graphics card?

  My computer is not even a week and I hate having to always download the patches and constant updates and spend hours searching for and trying to solve a problem that really should not appear in a first time.  Why are there so many problems with Windows?  Is this a problem with windows updates as well.  Active X controls?  Isuses of compatibility with 64-bit processes.  Can I use Firefox.  I did with my old HP, which finally launched the bucket and that's why I had to buy a new one.  I had to replace my battery before a year and my warranty battery lasted that long either and then the thing finally overheated and died.  But I had a lot of similar things happen before with the last HP laptop if it's Windows or is it HP or is it browsers, readers?

  I'm sorry if I'm unloading on you... I want too much, but it's so frustrating as a consumer of always having to go through such things.  I use my laptop to work on his own account so please help!

  Thanks for letting me vent...  I'd appreciate your help, thank you.

  A frustrated customer

  Thank you for visiting the Forums HP's Support and welcome. I'm sorry you're having problems.  I looked into your problem with video problems.

  You have uninstalled Internet Explorer?

  Have you tried Google Chrome?

  It already includes Adobe® Flash® Player built-in. Google Chrome automatically updates when new versions of Flash Player are available. Adobe are on version 15. Here'sa place to update. It has a link to Google Chrome as well.

  Here is a link to common problems of Flashplayer.

  I would try a system restore because this could undo any change that could happen with an update from Microsoft. Sometimes they have not completed or installed on the laptop.

  Hope this helps you.

  Thank you.

• Have problems and questions with Time Capsule were addressed in any significant way. Reluctant to buy according to your comments.

  Have problems and questions with Time Capsule was dealt with in a meaningful way? Reluctant to buy according to your comments.

  Apple did not have any material changes to the time Capsule to nearly 3 years. The only change that has occurred in the last 18 months or so is a firmware update to address security issues.

• Dear Sir I have toshiba l300 notebook now, I had some problems at the start that a time window is error and posted massage window stopped work go on line chek problem and restart when I restart then run ok that's my question ok

  Dear Sir I have toshiba l300 notebook now, I had some problems at the start that a time window is error and posted massage window stopped work go on line chek problem and restart when I restart then run ok that's my question ok

  Hello

  display the appropriate error message.

  the error codes?

  Try the clean boot procedure to find the application or program causing the problem.

  http://support.Microsoft.com/kb/929135

  all the best!

  Addison

• can you please help I am running windows vista Home premium and letters on the keyboard are in french is my question mark key e, what is the problem and how to fix it thanks Dan

  can you please help I am running windows vista Home premium and letters on the keyboard are in french is my question mark key e, what is the problem and how to fix it thanks Dan

  Your keyboard is set to french. To resolve this problem, look at the right hand of the bar at the bottom and you will see a keyboard. Click on it and press U.S..
  I hope this helps.

• I want to ask a question about my mobile mouse memory. I googled my problem and arrived at a forum. He has not answered my question, so I want to ask a question, but I couldn't find how to ask.

  I want to ask a question about my mobile mouse memory.  I googled my problem and arrived at a forum.  He has not answered my question, so I want to ask a question, but I couldn't find how to ask.

  You can ask your question here.

• Memory problems and questions related to the process

  Does this look just for you, because the modified memory does little until after I had computer problems and had to do a factory reset

  The operating system is Windows 7 64-bit edition SP1

  I disabled SuperFetch is told by the way, if this help anyone on this issue.

  Resource monitor

  

  Windows process

  

  Services

  

  

  

  Performance

  

  Hello

  When your computer doesn't have enough memory for all the actions it is trying to perform, Windows and your programs can stop working. To help prevent information loss, Windows will inform you when your computer is low on memory. You can also learn to recognize the signs of low memory and take measures to prevent the problem. Insufficient memory problems occur when your computer is running out of RAM and becomes virtual memory. This can happen when you run more programs that the RAM memory installed on the computer is designed to support. Low-memory problems can also occur when a program free up memory that it needs more. This problem is called memory overuse or a memory leak.

  You can consult the following Microsoft articles and check if it helps.

  Diagnosing memory problems on your computer

  http://Windows.Microsoft.com/en-AU/Windows7/diagnosing-memory-problems-on-your-computer

  Prevention of problems of memory

  http://Windows.Microsoft.com/en-AU/Windows/preventing-low-memory-problems#1TC=Windows-7

  You may receive an "Out of Memory" error message because of the limitation of in Windows Vista or Windows 7 desktop heap

  http://support.Microsoft.com/kb/947246

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  I hope this helps.

  Please post back with the State of the question and we will be happy to help you further.

• After you install the update, I get this message on an application Facebook '502 Bad Gateway nginx' what is the problem and what should I do to solve the problem?

  After you install the update, I get this message on a Facebook '502 Bad Gateway application
  Nginx' what is the problem and how do I solve the problem?

  See also:

  • http://en.kioskea.NET/FAQ/15289-Google-nginx-404-error
  • [811399/questions/811399]

• laptops with battery problems and does not turn on

  I get Strait to the point and say that I have 2 laptops that are causing a bit of touble.the the first is hp dv6 4023tx it worked fine one moment connected to food I have remove the power cable and its fine I turn it off leave it for about an hour and it will not power on I had a look at the error codes different and found that the code I get is an error of System Board and I'm not sure what to do about it. the other laptop is a dv3 2002tu and battery decided to die on me and I'm not sure what to do with it either. I download the wizard of battery and it gives me an OK (4) im not sure what that 4 means but it might be useful the dv3 .ps is the computer laptop im using to send these messages and get only on when plugged into an external power source.

  Hello @DBG-spas .

  Welcome to the HP Forums!

  I understand your laptops have feeding problems and the battery.

  If there are system errors Council you will need service on the motherboard. You can contact HP telephone support for options of repair and maintenance at 1-800-474-6836 in North America. For all other regions click here.

  The question of DV3 is a little different. If the battery is not the laptop, but it works very well with the power connected, it could be the battery or on the motherboard connections that are the problem. The only way to be really sure if its in the computer or the battery is to try another battery. The bad news here is that, to try another battery, you have good enough to buy one, that may not solve the problem.

  You can find the battery searching these reference numbers (according to what battery you have):

  Part number of battery 9 cells, 83-Wh-530803-001
  Part number 6-cell, 55-Wh-530802-001 battery
  Part number 6-cell, 47-Wh-530801-001 battery

  It is finally to if you want to make the bet or not, but you can also contact you the HP support by phone for repair on this one as well.

  Sorry for the bad news, but we hope this helps.

• "WMI has encountered a problem and needs to close."

  Windows Server 2003 SP2 (virtual server) get this popup error every few minutes: "WMI has encountered a problem and needs to close."
  In the application log:
  Source: Application error
  Event ID: 1000
  Category: (100)
  Failing application wmiprvse.exe, version 5.2.3790.4455, failed module ntdll.dll, version 5.2.3790.4937, address 0x000415f7 failure.

  Any ideas?

  Hello

  Your question is about Windows Server 2003 SP2. It is better suited for the public on the TechNet site. Please post your question in the following link for assistance:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads
  I hope this helps!

• After that I closed the lid on my laptop, when I reopen it, I have to keep moving the lid until I can get a picture. What could be the problem and how to fix?

  After that I closed the lid on my laptop, when I reopen it, I have to keep moving the lid until I can get a picture.  What could be the problem and how to fix?

  Hello

  Looks like a loose connector or a short circuit in the video cable. Check with a real
  store computer (one that works on computers cell phones internal ASUStek) or ASUStek
  Support, their documentation and online in their forums.

  Not a maintainable question by the user.

  ASUStek support
  http://support.ASUS.com/

  ASUStek Forums
  http://VIP.ASUS.com/forum/default.aspx?SLanguage=en-us

  ASUStek drivers
  http://support.ASUS.com/download/download.aspx?SLanguage=en-us

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• the application has encountered a problem and needs to close

  I build the LV, a request using the tabs, the FPGA dll and DLLs that communicate with devices CAN, GPIB, and PCI.

  The apears program to work properly, but sometimes and I can't see the patern, it crashes with the error "the application has encountered a problem and needs to close...". »

  Sometimes the error apears when I'm trying to exit the program, other times it hangs before that.

  I can't find the error because the program can work well for several hours and then crash or it hangs after 5 minutes of work with it.

  Clues about what goes wrong?

  Kind regards

  Daniel Coelho

  I'm still going through the example, but since the error ocours sporadicaly this could take some time to identify the error.

  I was browsing the code and I was wondering about simple things, like:

  -J' have many local variables, could it be the cause protected by some kind of error?

  -Since I use dll on my code, is there a way to make sure that all DLLs are loaded and unloaded properly?

  My program has a TAB with a simple UI of TestStand and when I change the tabs I close the user interface for teststand. When I use this UI I have load and unload DLLs of same that I use on other tabs, i. e., when you use the UI I load all DLLs that communicate with devices and when I change the tabs I unload all DLLs because on each separate TAB I can control these indicidually devices.

  It's a little hard to explain, but I think I managed

  Is there a grain of truth on my questions? If so, what could I do?

• TCP/IP services has encountered a problem and need to close. Windows Server 2003 R2 SP2

  TCP/IP services has encountered a problem and need to close.

  Windows Server 2003 R2 SP2

  That left me without a network or to the Internet on a PDC named DOMCON.

  Tried so far:

  1. last signed NIC drivers installed (8.0.27.0) to HP NC3120 Fast Ethernet NIC.

  2 netsh int ip reset resetiplog.txt

  reboot, enter the details of the intellectual property, etc... NO JOY!

  This server has been running for years until now.

  I can join the registry and files DOMCON_MpsReports.cab NetworkSubkey.reg section.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  Here is the link:http://technet.microsoft.com/en-us/windowsserver/bb512919.aspx

• Is there a telephone line or somewhere, I can talk to someone from Microsoft? I am having problems and are not getting any help anywhere...

  Is there a telephone line or somewhere, I can talk to someone from Microsoft? I am having problems and are not getting any help anywhere...

  Hello

  Answers can probably help if briefly you questions answers - Windows Forums for your
  version of Windows. Please provide all the information we need to help us help you.

  Answers - Windows Forums
  http://answers.Microsoft.com/en-us/Windows/Forum

  How to ask a question
  http://support.Microsoft.com/kb/555375

  ====================================================================

  Call Service customer Microsoft direct-1-800-642-7676-heures 05:00 til time 9 PM PST (USA).

  Contact Microsoft Customer Service
  http://support.Microsoft.com/kb/295539

  Microsoft support - contact us
  http://support.Microsoft.com/contactus/?ws=support#TAB0

  Microsoft - Microsoft Technical Support phone numbers
  http://support.Microsoft.com/kb/319726/en-us

  Microsoft - email us
  http://support.Microsoft.com/contactus/cu_sc_selector_email?ws=support%2csupport

  Options chat or telephone of the solution - top-right - Windows 7 Center
  http://support.Microsoft.com/ph/14019#TAB0

  Microsoft - product selection solutions centers
  http://support.Microsoft.com/select/?target=hub

  Solutions Microsoft Fixit Center
  http://support.Microsoft.com/FixIt/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Why do I receive flag showing that I have a problem and insert the disc. but nothing shows

  Why do I get a red flaag showing I have a problem and to insert the blank disc aa, what I do, but the flag persists?

  Hello

  • What disk you insert?
  • What are the instructions?
  • How long have you been faced with the question?
  • Are there changes to the computer?
  • The problem is present in Safe Mode and clean the boot?
   
  I suggest you run the Analysis System File Checker and see if TI the problem still occurs. To do this, please see the following article.
  http://support.Microsoft.com/kb/929833