D1G64UA: Windows 10 update fails due to no space in the recovery Partition

Similar Questions

• vSphere Host Update Utility - ERROR: not enough space on the boot partition

  I get the following error when I run the host update utility

  ERROR: Not enough space on the boot partition

  The boot partition doesn't have enough space to store initrd.img.

  Expected free space (MB): 50, found: 44

  I can free until you reach the required amount?

  Send the output of this command:

  DF h

  And the version of ESX 3.x

  See also this KB (there are a few tips on where space can be lost):

  http://KB.VMware.com/kb/1016511

  André

• Windows 8 clean install from the recovery partition

  Hello, I just purcased a new computer, last week. It contains a copy of the widows 8. I just got a new ssd 240 GB and I want to do a clean install of windows 8 opperating system not a ghost copy. I do not have a windows disk with my computer but I have a recovery partition on my current hard drive. How can I get windows to reinstall on my new ssd with only the recovery partition?

  Thanks in advance for your help.

  Hello

  A primary role of a set of recovery disks is to rebuild a machine after the failure of his HARD drive, in Exchange for a bigger HARD drive (capacity)) or Exchange a HDD with a SSD. I do not see why we cannot use the game in this case.

  Kind regards.

• on iPad Mini iOS 9.2.1 update fails due to low memory, even though 57 GB are available

  iOS 9.2.1 update failed due to low memory, although 57 GB was available.

  What is the cause and the fix?

  EN 57 is the size of your storage. There is no iPad with 57 GB of memory (live RAM). Have you tried to hold the home and power buttons until the iPad reboots? Also try double clicking the home button and close any open applications.

• Windows xp update fails after reinstall OE discs error number: 0x8024400A

  Windows xp update fails after reinstall OE discs error number: 0x8024400A. Cannont even run Windows update at all.

  Hello
   
  To work on the issue, consult these links.
   

  Temporary connection related errors may occur when you use Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/836941
   
  Note: make sure that you enable the antivirus software, other security and firewall after the test programs.
   
  Caution:
  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  You can also designate a similar thread that addresses the question:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/how-can-i-get-Windows-Update-error-x8024400a/35ba7694-c9b2-4043-a4c0-777d4b7736dc

  Hope the information is useful.

• Trying to save the Grand Theft Auto IV game and needed an upgrade to record with the error message: Windows live update failed 0 x 80080005

  Original title: games for windows live update failed 0 x 80080005

  Hello!

  I had to GTA IV the first time when I wanted to save my game play. I'm logged into my account and he said that an upgrade is needed to save the progress. So I tried to put up-to-date, but after 10 seconds, he said that a problem has been found. I need to check my internet connection (no problem). So for support windows if the problem remained. On the note it says 0 x 80080005 I don't know what that means.
  Please help, and I'll hope you'll know the answer.

  Hello

  Thanks for posting your question in the Microsoft Community.

  I understand you are trying to save the game Grand Theft Auto IV and needed an update to register with windows live error update failed 0 x 80080005. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  Please follow the steps described in the links below and check the issue:

   

  Games for Windows - LIVE: how update by using Windows Update:

  http://support.Microsoft.com/kb/959864

   

   

  'Download failed' error:

  http://www.Microsoft.com/games/en-us/support/pages/downloadFailed.aspx

   

   

  Games for Windows LIVE errors:

  http://support.Xbox.com/en-us/Games/PC-games/games-for-Windows-errors-messages

   

   

  For more information:

   

  Xbox articles:

  http://forums.Xbox.com/xbox_forums/b/default.aspx

   

   

  Contact Xbox support:

  http://support.Xbox.com/en-us/

   

   

  Xbox LIVE Support:

  http://support.Xbox.com/en-us/Xbox-Live/browse?XR=shellnav

   

   

   

  I hope the above information helps you and your response is very important for us to ensure a proper resolution.

• Used the recovery partition to get rid of a virus. Can I upgrade to windows 10 now or do I have to install all the updates first?

  Used the recovery partition (windows 7) to get rid of a virus. Can I update immediately for windows 10 or do I install all the updates of Windows 7 first of all?

  You can update immediately:

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  Check that Windows 7 is active.

• Dell Inspiron 1545 with Windows Vista hard drive failed and I need help, get the recovery disks.

  Hi I have dell inspiron 1545 vith windows vista, when I bought it, I did not receive installation or recovery cd because it is recovery partition, but now the disk hard colapsed and I cannot start windows or access the recovery partition, so if I buy the new hard disk where can I get windows vista? I've got my activation code, thanks Andrej

  original title: where to get vista

  Hello

  Check with Support from Dell, which must sell cheap installation media since you already own windows.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/
  --------------------------------------------------------------------------------------------

  Request backup discs - you can also request disks of Vista in the comments
  https://support.Dell.com/support/topics/global.aspx/support/DellCare/en/backupcd_form

  Why my Dell system did not come with disks? - Applies to Vista and Windows 7
  http://support.Dell.com/support/topics/global.aspx/support/DSN/document?c=us&CS=19&docid=370461&l=en&s=DHS

  Restore your Computer´s software to factory settings<-- this="" is="" for="">
  http://support.Dell.com/support/topics/global.aspx/support/DSN/en/document?c=us&CS=19&DL=false&l=en&s=DHS&docid=3E48AE3870775D64E040A68F5B2877D4&doclang=en

  Restore your Computer´s software to factory settings<-- this="" is="" for="">
  http://support.dell.com/support/topics/global.aspx/support/dsn/document?c=us&cs=19&l=en&s=dhs&docid=3E48AE3870775D64E040A68F5B2877D4&journalid=8E538A50B8131233E040AC0A66E94135&Query=&SystemID=&ServiceTag=&contenttype=&os=&component=&lang=&doclang=&toggle=&dl=

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• P850 satellite - failure with the recovery partition - boot selection failed

  Hello Hello,

  My problem is this: a few days ago, I update Windows and slow start is not blocked after several days decided to put the factory, always try to blur this back to the factory and is more, let me not to recognize the recovery partition, I created with Media Creator of recovery disks, but aren't working doesn't let me use me I get the following error :
  Cannot start Windows, a recent hardware or software change might be the cause. To solve the problem:

  1. Insert your windows installation disc and restart your computer.
  2. choose your language setting and then click "next".
  3. click on "Repair your computer."

  If you do not have the disk, contact the manufacturer administratos or your system's computer.

  Status: 0xc000000e

  Info: the boot selection failed because a required device is not accessible.

  I tried a thousand ways to access the partition recovery but not detected the remains because some program I can see active that turn it off, which is hidden, but still missing and I can't boot from the partition, I gave me a CD of Windows 7, I formatted the hard drive partition, that you and I have reinstalled again but driver Toshiba the problem is that the recovery partition is still but I can not access the recovery discs are not me, work, when I go to see the Recovery Console:
  * Startup Repair
  * System restore
  * Restore
  * Tool of Diagnoctic memory of Windows
  * Command line

  Hello Hello, my problem is this: a few days ago, I update Windows and slow start is not blocked after several days decided to put the factory, always try to blur this back to the factory and is more, let me not to recognize the recovery partition, I created with Media Creator of recovery disks, but aren't working doesn't let me use me I get the following error :

  Cannot start Windows, a recent hardware or software change might be the cause. To solve the problem: *.

  1. Insert your windows installation disc and restart your computer

  2. choose your language setting and then click "next". *

  3. click on "Repair your computer." *

  If you do not have this disk, contact the manufacturer of your system administratos or computer for assistance.*

  Status: 0xc000000e *.
  Info: the boot selection failed because a required device is inaccessible.*

  I tried a thousand ways to access the partition recovery but not detected the remains because some program I can see active that turn it off, which is hidden, but still missing and I can't boot from the partition, I gave me a CD of Windows 7, I formatted the hard drive partition, that you and I have reinstalled again but driver Toshiba the problem is that the recovery partition is still but I can not access the recovery discs are not my work.

  Recovery Console has these options:
  option 1: Startup Repair.
  Option 2: System Restore.
  Option 3: image retrieval system.
  Option 4: Windows Memory Diagnostic.
  Option 5: command prompt

• Satellite P750 (PSAY1A) - How update the recovery partition?

  Now that I found out that using the recovery on a new HARD drive would create the recovery Partition... comes the question... How do I update the recovery partition.

  My Toshiba Satellite P750 (PSAY1A-01Y022) the factory settings has 132 update of Windows that should be applied during the first pass. I had to run Windows update 4 times before she shows "up-to-date". Not to mention drivers Toshiba as well.

  I also want to include some applications (Microsoft Office and other software and utilities)...
  Overall, I spent 2 days just to bring it t the State I want in.
  But I can't just access the recovery Partition (of the less any of this!)

  If you look at disk management, the recovery Partition is not a Volume name and that the file system is empty. If I right click on the recovery partition... all I see is "Help" Option

  I tried to assign a drive by using Diskpart letter... but it doesn't show much.
  My guess is that it is GBT/EUFI.

  Does anyone have experience updating the recovery Partition?

  > Now that I found out that using the recovery on a new HARD drive would create the recovery Partition... comes the question... How do I update the recovery partition.

  What do you mean by update recovery partition?
  The recovery partition should NOT be touched!

  In which case you'd change the partition, the HARD drive recovery process could not be started!

  Probably, you have not understood the meaning of such a HARD drive recovery procedure.
  It's the option provided by Toshiba and the recovery of HARD drive allows you to establish the notebook to factory settings; on the same State as at the first day of the purchase.

• Want to Phoenix 850-150qe: program file can not be updated as a not enough space on the new computer

  I have a new computer with disk 3 TB initially space.  I have now available 2.60 TB.  I have this simple little card game that has an update of 207 MB of available space required.  Whenever I try to load it, it says "program file can not be updated because of insufficient disk space".   The original game loaded just fine but not the update.  I wrote to the company that has given me a standard introductory text on turn off my antivirus which is nothing to do with my problem.  Someone else has encountered this and if yes, what is your work-around?  I am trying to load it on the C drive with my game so am loading at the right side of the road.

  I solved my problem.  I went back to my computer and I went back to my reliable want 700-074 also having windows installed 10.  My little program works very well and I was able to update the program.  This program was one of the many problems with this computer.

• Software update in the recovery Partition

  Is it possible to update the recovery partition with the latest hotfixes or service pack? (I have a windows vista SP1, and I want to update to SP2 when the official out).

  Laptop DV9830US - Core 2 Duo T5550 1.83 GHz - 4 GB 667 MHz - 320 GB HD @ - GeForce 8600 M GS @ 17.0 "WXGA + 1440 x 900

  No, recovering files is read-only. The only time I've seen is file recovery corrupted if HP issues a patch that is capable of writing to them_which rarely occurs.

• Updating software in the recovery partition

  Is anyway to update software in the partition recovery like Skype, etc windows updates?

  It saves time like u won t have to update next time u do a system recovery.

  so please please please tell me if you know.

  Thank you.

  Hello

  Unfortunately, you can't do that - generally, any changes made to the recovery Partition may cause its failure.

  Kind regards

  DP - K

• will not install updates of system restore will not be the recovery of the system (no installation cd)

  Hello out there!  Bought this machine at a pawn shop, HP seems another good charity that cannot get updates installed and that is all I want to do right now - knowing that I did a restore system first and made a recovery (ithink) cd and I see that a lot of the system drivers are disabled (don't know how do to light and cannot find material to read) that I'm sure is a simple solution for you, but for me - OH MY - thank - you, Vista 32-bit sp2

  http://welcome.HP.com/country/us/en/support.html

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  You can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their way of doing recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• Restore using the recovery disks on Inspiron 15 3521 supplied with Windows 8 Pro. Question on the recovery partition.

  I created by the user recovery disks.  I created them the day I got the computer and he made three of them.  My brother has deleted my recovery partition just now.  My question is, if I resumed my Inspiron 15 3521 using three recovery disks that I created, be it recreate the recovery partition in the process?   I just need an answer to this question, not responses indicating that, if I have the disks, I don't need the recovery partition, why would I want the recovery partition if I have the drive, etc.  I would like to just a simple answer to the question.  If I use the recovery discs, it will recreate the partition recovery with all the info, she was in it when I got to the computer?  Once the recovery is completed from disks, will be that recovery partition be there as the day I got the computer, so if I wanted to (I don't want to, but I'm just a question) I could still create the recovery of her discs?  Basically, the computer will be exactly as it was the day I got it home, recover partition and everything?  Or, it will restore the computer to the new plant, but not to re-create the recovery partition with everything she had in it the day I got it?

  Thanks in advance.

  Yes, it will be if you select the correct option.

  See these videos:

  http://en.community.Dell.com/support-forums/software-OS/w/microsoft_os/4794.21-Windows-8-restoring-from-recovery-media.aspx

  Recovery of factory - "deletes all data and resets the Partitions.

  Updating of the factory - "Only restores the System Partition and keep other Partition content".

  It might be good for you to ask a Windows OS DVD 8.0/8.1 just in case the recovery media works however.