10.2.0.5 patch with 11i group

Similar Questions

• Patching EBS 11i, 12.0, 12.1

  Hi all

  I have been using EBS R12.2.4 for awhile and used for patching with adoption.

  We have now old 12.1 EBS who need additional patch.

  I am ready to forget the patchwork of old process, and I can't find my notes.

  Is patching 11i, 12.0 and 12.1 have the same process?

  I mean, if I find docs for 11i, it will work also in 12.1?

  Thank you very much

  JC

  Steps simple patching to 11i/R12.1

  a.) all analyses of Patch and download patches

  (b) take backup--(facultatif, dépend deles de correctifs vous postulez)

  (c.) unzip Patches

  (d.) the Services of app stop

  e.) activate the Maintenance Mode using adadmin

  f.) apply the patch using adpatch - don't worry about the options from now on, answering all questions about the session adpatch

  (g.) the steps Post Patch

  (h.) disable Maintenance Mode

  (I.) Services of Applicaton of start

  Very basic measures you can follow

  concerning

  Pravin

• How to associate policies crypto with tunnel-group?

  Hi, when I review the configuration of the VPN from point to point, I have a question. The ASA has three peer-to-peer VPN configuration. So, there are also three groups of tunnel in there. My question is how each VPN to ensure encryption policy tunnel-group? In the anther Word, what encryption policy associated with tunnel-group? Thank you.

  This is the phase 1, they work from top to bottom.  When you try to negotiate the tunnel between two counterparts, in the background, they send all of your policies and according to which is first (from top to bottom) is used.

  For example.

  If your counterpart device uses (3des, md5, pre-shared key and group 2), it will not match the policy 1 and the rest of the policy will not be considered.

  Kind regards

  Sandra

• ACS 5.2 assignment of authorization with nested groups in LDAP

  I have a Cisco Secure ACS 5.2 on a virtual machine. We use it for administrative access to our equipment Cisco GANYMEDE +. I use LDAP to authenticate with acitive directory. I currently run when a user is directly in the group that is assigned.  I change the way in which assign us group permissions and have created nested groups.

  For example:

  -User1 is a member of group1

  g -roup1 is a member of the "Group 2".

  I have card group2 to have access to my devices. However, User1 is not get mapped to the Group of law and access is denied.

  When I go to the monitoring, reporting and authentication GANYMEDE + details, under other attributes where it shows the outside groups the user is a member, I don't see group2, only group1.

  However when User1 is a member of group2 directly, the user is able to log on.

  GBA 5.2 not does support permissions allow this how to use nested groups?

  Mapping of nested groups is not supported by LDAP (because users containing that attribute memberOf groups just above them, are not nested). It is a behavior deafult when we use nested with LDAP groups. You must add subgroups for GBA and both respective authorization rules.

  Kind regards

  Jousset

  The rate of useful messages-

• Transform a shape layer with several groups/paths in another?

  Hello

  I'm trying to turn the form A B-shaped into aftereffects.

  

  Both are drawn in illustrator, and I imported into aftereffects and diverted path to forms.

  At the moment I do a key framing color and the path in the sticky on the form A and form B. From there I will meet with two questions.

  (1) for now I have to manually open each group, every path, every feature of color until I'm able to keyframe them. After that I have to paste the keyframe of the track and keyframe colors individually to the corresponding group. It's doable, but I have to turn the form in 10 more other variants. Just want to check is there a shorter way to the key all the way to access and color properties frame. And then copy all of the keyframes from one form to the other.

  

  (2) I noticed that not all the points on the path are created equal. I think that the "starting point" is noted with an extra box compared to other points.

  

  As the "starting point" of a path is different from the rest, the transition has become weird.
  Can I check if someone knows how to change the "starting point" to another point on the same path? Or y at - it another way of fixing?

  Finally, if there is more easy morphing shapes to another, I'll be happy to listen. Thanks a lot ~

  I would do this kind of thing differently and 90% of the work in Illustrator.

  I would like to begin by drawing a path in Illustrator, to duplicate the path and to change the size and position and change the color of the outline of the color I wanted for the inside of the first form at the beginning of the animation.

  

  I use then the gradient tool to create a blend between the two forms specifying the number of steps, so my first form duly filled out for one frame looked like this:

  

  I would then do the same for my second form by using different colors, so I got this:

  

  With the two mixtures on you will see this:

  

  The upper mixing layer is where your animation will start and the bottom is where your animation should end.

  The next step is to select Merge layers and spread the mixture, if you find yourself with two groups:

  

  Here comes the fun part. Select groups, and then specify the number of steps you want as long as the number of images that you want in your animation. In this case, I want a second 1 transition and my comp is 29.97 FPS, so I selected 30.

  

  Now spread the mixture:

  

  We should end up with a group at layer 1 with 30 subgroups:

  

  Ungroup the higher group only then deselect all layers and select a single layer, then choose release to layers (sequence).

  

  now select all sub layers in the layer panel and drag it above layer 1. Layer 1 is now empty, so you can delete:

  

  Save the file HAVE and import into AE as a model with the size of the layer keeps selected:

  

  [Open the model, select all layers, move the a CTI frame to the right by pressing Ctrl/Cmnd + arrow to the right, then press Alt/Option +] to set the out point of all layers and then the wizard from keyframe to the layers in sequence without overlapping:

  

  I usually go to the point of exit of the background layer and press N to set the work area exit point, then cut the comp to work area.

  

  This model is then nested in your main comp and you can activate the time-remapping, so you can change the speed and use CC force motion blur to smooth animation.

  

  You will find it much easier to create the morph to a shape layer in Illustrator those in AE, you don't need to convert anything to forms and most of the work is done for you before you start. Total time to create this project with about 1/4 of the time it took to create this post.

• Power CLI script to add multiple VLANs with port group name in an ESX cluster

  Hi all

  Can someone help me get a script adds several VLANs with port group name in an ESX cluster?

  Kind regards

  Suresh

  OK, so you just need to do an Import-Csv inside the loop and change the variables accordingly.

  What is the provision of this CSV file?

• VCloud direction to connect to Vcenter with 3 groups.

  Hi all

  We have a vcenter with 3 groups, we want to connect the vcloud Director to a single cluster where we have virtual distributed switch. We want to manage the other two clusters with vcenter. Is it possible to connect a single cluster in vcenter vcloud Director. Also is there any document allowing to learn about how vcloud Director will communicate with vcenter when connecting and after.

  Thanks in advance.

  Kind regards

  Vikram.

  Yes, it is possible.  When you create a 'provider' in vCloud Director... you select the Cluster that you want to use as resources gross calculation.  Then, when vCloud Director creates items in this provider, it will be only the cluster you had selected.

  The connection is via the SDK for the most part, on port TCP 443.  This is the same as the vSphere client installable.  If you are looking for our KB system there is a diagram of network for reference. (1030816 KB)

• Detection of colliding with the grouped shapes

  Hello world.
  I'm having a problem with collision detection.
  I do an underwater game where the submarines are groups of shapes (two ellipses and two small rectangles).
  I use a circle (IARC) object for the missiles.
  
  
  It detects collisions when I do this:
  //////////////////////////////////////////////////
  If (circ.intersects (sub.getBoundsInLocal ()))
  {
  System.out.println ("you been touched");
  Returns true;
  }
  /////////////////////////////////////////////////
  
  
  
  Or it detects collision if I do:
  ////////////////////////////////////////////////
  If (sub.getChildren () .get (2) .intersects (circ.getBoundsInLocal ()))
  {
  System.out.println ("you been touched");
  Returns true;
  }
  ///////////////////////////////////////////////////////////////////////
  (the child in the 2 index is the main body of the Sub - ellipse shape)
  
  
  
  If I add an object not grouped as a simple rectangle shape and check the collisions on it then it detects very well. 'r' is the rectangle object.
  ////////////////////////////////////////////////////////////////////////
  If (circ.intersects (r.getBoundsInLocal ()))
  {
  System.out.println ("you hit sucker");
  Returns true;
  }
  ///////////////////////////////////////////////////////////////////////////
  
  
  
  Can we see why it will not work with the grouped shapes or a child of the Group? Or y at - it a simpler way that I'm missing?
  
  Thanks a lot :)

  For a group shape, use the boundsInParent property.

      circ.intersects(sub.getBoundsInParent())
  

• latest patch for 11i

  Hai,
  
  Please note that we are Oracle application version 11.5.10.2 with DB 10.2.0.5. We all have
  functional modules, including human resources, PAYROLL, PER, FIN, GL, AP, AR, FA, INV, SCM, PROJECT...
  
  Now, we are in the process of upgrading our EBS 12.1.3, application so that we want to be in the last group of patches of 11.5.10.2 level. Please tell us the last group of fixes to which we can improve the existing instance of 11i.

  936074 wrote:
  Hai,

  Please note that we are Oracle application version 11.5.10.2 with DB 10.2.0.5. We all have
  functional modules, including human resources, PAYROLL, PER, FIN, GL, AP, AR, FA, INV, SCM, PROJECT...

  Now, we are in the process of upgrading our EBS 12.1.3, application so that we want to be in the last group of patches of 11.5.10.2 level. Please tell us the last group of fixes to which we can improve the existing instance of 11i.

  Identify the recommended electrode for E-Business Suite environments
  https://blogs.Oracle.com/stevenChan/entry/recommended_patches_for_oracle_e

  Identify the last families Packs for Oracle E-Business Suite
  https://blogs.Oracle.com/stevenChan/entry/latest_available_packs_for_oracle

  Utility group comparison of current Oracle Applications patches - patchsets.sh [139684.1 ID]

  Thank you
  Hussein

• Install RAC 11 GR 2 and apply the patches with the new Option of software updates YES

  Anyone tried the installation with the new Option of software updates?
  
  I'm going to install grid RAC 11 GR 2 and I intend to do the following steps:
  (1) install the Oracle Grid Infrastructure 11.2.0.2 patch group
  (2) make all configurations with YES
  (3) create ASM disks
  (4) install Oracle Database 11.2.0.2 software only
  (5) apply recommended patches 11.2.0.2.2 Oracle (12311357) and 12431716. (Ref. MOS doc [756671.1 ID])
  (6) create the RAC (advanced option) with DBCA database
  
  With these steps:
  Grid and ASM disks would be configured without the recommended patches, but the database will be created with applied patches.
  
  I would not do a "Software only" install IM and then apply the patches because later I would have to manually do all the configuration steps.
  
  If I use the Option of YES software updates to apply patches, YES makes the adjustment, and then I would set up the GRID with YES?
  
  Quote from Oracle® Setup Guide Network Infrastructure 11 g Release 2 (11.2) for Linux - E17212 number of part-11:
  'Use the feature of dynamic download and apply software upgrades of software updates as part of the installation of the Oracle database. You can also download updates separately using the downloadUpdates option and later to apply during installation by providing the location where updates. »
  
  I could not find more detailed information on this feature in the documentation and MOS.
  
  Thank you

  Hello

  You can download the latest updates and patches to help with option - downloadUpdates

  ./runInstaller -downloadUpdates
  

  You can use this note:

  * How to download the latest updates and patches using 11.2.0.2 YES [ID 1295074.1] *.

  Don't miss...
  * Error: INS-20704 while installation 11.2.0.2 with Option 'use downloaded software updates' [1265270.1 ID] *.
  : Note ensure that the user download the updates of patches have own/correct permission to download updates to patch to MOS (My Oracle Support).
  Do not use the directories/tmp/oraInstall * for the download location. New bug 9975999

  Documentation explaining...
  4.5.1 running Oracle Universal Installer
  Download of updates before Installation
  http://download.Oracle.com/docs/CD/E11882_01/install.112/e16763/inst_task.htm#BABJGGJH

  Kind regards
  Levi Pereira

• iOS 10 - auto bluetooth with contact group synchronization

  I have my iPhone 5s coupled to my car bluetooth hands-free system.

  With iOS 9 I was able to sync only certain groups of Contacts from iPhone. It was helpful that I have a number of groups in iPhone Contacts, including one specially created for syncing to my car.

  Since the update of my iPhone to iOS 10, I have that option in the bluetooth settings of the iPhone to check any combination of 'Favorite phone', "Phone Recents" or "All Contacts". None of them are useful for me as I want to synchronize with one of the original groups in Contacts.

  Help, please!

  Thank you.

  The same problem. A month ago I could synchronize specific groups with the phone book from my car. Now, the only option is "Contact".  Help!

• MainStage randomly change patches with Korg nanokontroller 2

  Help! I have spend hours setting up 10 patches for a mainstage concert constantly saving everything than to go back and find that my tasks evolve at random.  After putting a text parameter with the predefined names, I see that for some reason any change to random other patches that I assign.  What can I do to stop this?  What is the nanokontroller this?  I'd be delighted for patches I worked on the same being that I left

  Maybe the Instrument which is located on a channel strip receives both program changes?

  I used plug-ins AAS and they responded also to changes to the program so when I send change the patch to the SP, the * care was also changing to a patch different in it's library. I need to disable this feature in the plug so that it would not change so

• Help with Contact groups.

  Not a question. It's your comments. Please put this comment as the case failed.

  I asked for help the smart groups and iPhones. The smart group created on my Macbook was not visible on my iPhone. This facility is not provided in your software. Points to note and require correction:

  1. this fact was not apparent in the assistance available on my MacBook. It should be; and if it had been, I would not call you. Please change the help files.

  2. the fact that this one is not planned is a nuisance. Please change the help files to inform users of how to deal with it:-

  2.1 Smart groups can be set up on the MacBook include a word or symbol in the file of contacts, so that all of the contacts in the smart group can be identified. But only in the Macbook.

  2.2 If you want data available on all devices, the Group of the chip to be converted to a group. To do this, create an empty group, select the Smart group and move it to the empty group. The group is now visible and can be changed from all devices.  Remove the Smart group: this will remove only the name of the group, but not the underlying data. Change group names as appropriate.

  Havant a clue wrote:

  Not a question. It's your comments. Please put this comment as the case failed.

  I asked for help the smart groups and iPhones. The smart group created on my Macbook was not visible on my iPhone. This facility is not provided in your software. Points to note and require correction:

  1. this fact was not apparent in the assistance available on my MacBook. It should be; and if it had been, I would not call you. Please change the help files.

  2. the fact that this one is not planned is a nuisance. Please change the help files to inform users of how to deal with it:-

  2.1 Smart groups can be set up on the MacBook include a word or symbol in the file of contacts, so that all of the contacts in the smart group can be identified. But only in the Macbook.

  2.2 If you want data available on all devices, the Group of the chip to be converted to a group. To do this, create an empty group, select the Smart group and move it to the empty group. The group is now visible and can be changed from all devices.  Remove the Smart group: this will remove only the name of the group, but not the underlying data. Change group names as appropriate.

  Apple.com/Feedback will be where you want to send any comments you may have, so it can be seen by the right eye. This is only intended as a basic user to user forum.

• FF29.0 crashes when loading loading with tab groups, very well without tab groups. WHY?

  I have approximately 16-18 groups of tabs (at least, I did it in FF28.0). When the update FF29.0, FF crashed EVERY time when trying to load. Finally, I did a fresh reinstall of FF29.0. After you have reinstalled my 18 modules, I ran the Session Manager and loaded a session from before I had updated to 29,0. He had all my groups of tabs! WOW, it load. Well, it loaded only ONCE. He never asked again. Crashes every time. I saved sessionstore.bak and sessonstore.js at different times. I copied an of before the crashes and FF29.0 works very well. It does everything just not with all of my tab groups. Crashes every time during loading. If it does not work with my registered tab groups, I'll be forced to return to FF28.0. Would not progress.

  I SOLVED THE PROBLEM!
  Turns out to be the the traffic light (BTL) Bitdefender module. Well, any.
  BTL verifies each NEW site against a master list of 'bad' sites. Does ONCE for each NEW site, you're going to. apparently, it holds a register that there is no need to double-check sites, he already deleted. I have about 160 Web sites registered in 16 groups of tabs. In Firefox 28.0, these sites have been deforested when I visited them. When I try to move to 29,0 FF, BTL tent now re - CHECK all 160 sites! What happens while FF 29,0 installs and has just overwhelm the program installation or my computer to make the installation crashes! During installation, I noticed my CPU monitor 4 cores would be twittering about 30-40% along the CPU usage when all of a sudden all 4 cores would hit 100%. This will continue until the installation would break (after about 10-15 seconds).
  So, I finally tried a relocation that would lose all my Add-ons, but keep my tabs, bookmarks and tab groups. With NO Add-ons installed, 29.0 FF was fine and all my tabs and groups of tabs were still there. The first add-on I installed was BTL. She appeared to open a new tab telling me that the site Web of EACH tab (all 160) was OK. So, he opened more than 160 tabs to say that every site tabs was clean! It took a while. (But not as long as it took to close!) So, after the closure of all 160 tabs, I restart 29,0 FF and NOT of PROBLEMS! Opens right and I still have access to all of my tab groups. After 3 hours, I managed to install all the ons Add-21 I had before. YES!
  The short answer, I suppose, is simply uninstall BTL FF 28.0 to 29,0 pre-upgrade. Then install BTL and wait until it finishes its controls to close all tabs. Hope this helps someone.

• Problem with tab groups

  So I decided to try the groups to tabs, because I had never actually used the feature before. Now, every time I open Firefox the tab or tabs that belonged to the Group of open again. How can I stop this?

  Hello

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

  Thank you.