10 caused problems Windows

Similar Questions

• In Windows XP, the $ntUninstall directories can be deleted without causing problems.

  I have Windows XP SP3 POS PC in our retail store lcocations.  These machines have a slightly smaller boot partition.  My question is, when you install updates from Microsoft, it creates an uninstall directory in the Windows directory.  So Windows XP, $ntUninstall directories can be deleted without causing problems or causing previous updates to be reinstalled.

  I have Windows XP SP3 POS PC in our retail store lcocations.  These machines have a slightly smaller boot partition.  My question is, when you install updates from Microsoft, it creates an uninstall directory in the Windows directory.  So Windows XP, $ntUninstall directories can be deleted without causing problems or causing previous updates to be reinstalled.

  The article at the link below gives a detailed explanation of the $ntUninstall directories. This should you guide as to whether or not you can remove folders.

  http://ask-Leo.com/can_ntuninstall_folders_be_deleted.html

• Event Viewer windows will cause problems with your computer

  Windows Vista Ultimate: Will be the windows event viewer are causing problems, such as freeze ups, slow down, with your computer?

  There is never for me, and I never heard him make.

  I hope this helps.  Good luck.

• Frequent hard drive exchanges are causing problems for activation of Windows 7?

  I am new to Windows 7.    I frequently switch (turn) the hard drive on my system - say every 6 weeks or more.  I use the same set of 2-3 disks and restore my system from a disk image every time when I exchange them.   Change the drive often happens to cause problems with the activation of Windows 7?   Thank you.

  Hi Lone Star,

  Change the hard drive on systems not prompt swap you for activation but after that the HDD on another system if the operating system is validated activation would be asked that the physical address of machines would have changed.

• problem caused by Windows

  Why everytime I try to do on Windows Media Center is a problem caused by Windows?

  It comes with Vista, upgrade install and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads

  They will help you in the Forum Vista programs at the above address.

  See you soon.

  Mick Murphy - Microsoft partner

• Window update causing problems of printer driver

  Hi, I have a laptop running XP and router wireless computer (WAG54G) and a set of HP6380 in one. About 2 nights ago an update to Windows Installer by himself and rebooted the laptop (even though I have some turned off automatic updates what they seem to be screwing with anything these updates produce still grr)...

  I went to try and print and to found the 6380 was absent from the list of available printers... The problem is not with the wireless network (as it is trendy and functional). I don't know what it does the update of windows... but when I tried to reinstall the drivers for this printer from the disc, he acknowledged that they were already installed... So I uninstalled them instead (and it is taken up only parts of the driver remained and he removed these pieces).

  Then I tried to do a fresh driver... install that took a long time because it got stuck at the end... Finally, he came up with an error and so I tried to introduce him, HP - and received click on a desktop icon... (Icon HP - XP Installation). I tried it but it tells me to 1) Reinstall driver (done twice -) solve printing problems wireless (not a problem at this point given that I have no printer driver and I can use the network wireless for other things very well) well tried anyway... or 2

  Anyone has any suggestions please > in the past when Windows updates have caused problems, I used the system restore to roll back, but this is only a temporary solution - as Windows insists on the updates I want!

  Thank you very much!

  If you have the original HP software CD, look in the folder of the ccc/utils for a L3_unintsall (or similar).  Run for an uninstall very full.

  Reset.

  Now, download the latest version of the software for your printer from the "Support & Driver" link at the top of this page.  DO NOT reinstall from the CD (a good rule is in general not the CDs software, but to go to the website of the manufacturer for the latest and best).

• Pavilion 500 215 el: audio problem Windows 10 anniversary update

  I have an audio problem, then before moving to Windows 10 or the update of the anniversary of the audio working properly after the update I noticed immediately that the sound is distorted or "crunches".
  I haven't identified the problem because it's random, very often and it's very annoying, my sound system is its IDT DTS + I tried to reinstall the drivers with the latest version but some of the problem persists...
  Only, I noticed that the problem is more 'feel' when the bass setting is higher or when I change the audio setting to my taste.
  I ask you to help also became very boring because without my custom settings is really horrible!
  Thank you.
  Sorry for the English, but this isn't my mother tongue, I used google translator.

  Hi there @Alexcpp,

  Welcome to the Forums of HP Support!  I understand that, after the update of Windows 10 anniversary, you had some sound problems.  I'm happy to give you a helping hand with this.

  Check the support page for your model of HP Pavilion 500-215el desktop PC, there don't seem to be updated drivers, and you have already tried to reinstall existing ones.

  You can always try to use the HP Support Assistant, HP PCs - using HP Support Assistant (Windows 10, 8, 7) to see if there is a driver available that is not displayed on the support page. It is unlikely, but there is always a chance that the page has not yet updated.

  Another possibility is to make some adjustments on your system, just in case there is another driver or software that interferes with the audio, which could cause problems of lag. You can try the search, even if these: computers HP - computer is slow (10 Windows), HP - slow Internet troubleshooting (10, 8 Windows) computers.  They are never a waste of time because often there is something that could help the overall performance of the system.

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• KB975496 and causing problems KB980408.

  These two updates that I just installed caused problems with my C drive.  The disk check said he cannot work while the disk is used and how have it run at startup says it cannot do the job and use the system restore.  System Restore says that it cannot function without a check disk first.  What should I do?

  Depending on the operating system you have, and if your hardware vendor as long as you media appropriate, you can make a drive that started at the Windows install DVD while repair.

  In Vista (?) and Windows 7 boot from the installation DVD allows you to use repair tools, which is a command line.  The type of command line

  CHKDSK C: /F

  and a repair disc should be performed.

  Caution:-the last time I tried this it turns out that my hard drive was not physically, and for this reason, the disk check has failed, completely destroy the file system and cause a complete data loss.  REAR FIRST.

• Problem Windows install with Java

  A few days ago the Java (TM) automatic update for Windows Vista has started and I accepted and allowed him to install. I allowed the installer through my firewall, I use COMODO Firewall and the installer came to fine and started to install. Well well, not too long after it starts, maybe... 15 seconds, the installation ends and comes with a Java error, but also a Setup error indicating that there is something wrong with my Windows Installer. I have no idea how to solve this problem, nothing helps, I don't know what version I have, and I see is Windows Installer 4.5 and many other things that do not seem to resemble each other, they will work. Please help, I can't some uninstalled programs or installed because of this. Thank you.

  Hello

  Try this

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  and if any;

  Description of the Windows Installer CleanUp utility
  http://support.Microsoft.com/kb/290301

  --------------------------------------------------------------------

  Do with these two

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK

  Close IE

  Then use Revo to uninstall Java, so you can reinstall - free Version
  http://www.revouninstaller.com/revo_uninstaller_free_download.html

  Reset.

  Now go back to Java and reinstall
  http://www.Java.com/en/

  ----------------------------------------------------------

  If so - get something contradictory and reset IE

  IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
  "(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
  are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.

  Could be a free - BHOremover - BHO - standalone program, needs no installation, download and run
  http://securityxploded.com/bhoremover.php

  Startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Update of Java (besure to go back and disable SSV2 Addon)
  http://www.Java.com/en/

  What antivirus/antispyware/security products do you use? That were ALREADY on your computer
  as remnants can cause strange problems.

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Network adapters: Microsoft Windows Mobile remote adapter causes the Windows 7 upgrade to fail.

  Network adapters: Microsoft Windows Mobile remote adapter causes the Windows 7 upgrade to fail.

  I did everything to prepare for the upgrade. The Upgrade Advisor says it all right. But I get the message that this network adapter is a problem. It does not appear in device menager even under hidden objects, so I can't uninstall or update.

  It is obviously a problem for more than two years. Why is there not a difficulty now, or at least a well validated response that meets this situation rather than simply repeat the statement to execute the Advisor (done) or update the driver (which is impossible because the card network can not be found)?

  Hello

  You can try these:

  Step 1:

  a. click the Start button.

  (b) in the search box type devmgmt.msc and then press ENTER.

  c. find under the "Mobile Devices" "Microsoft USB Sync" node. If this is not present, proceed to the next step. Otherwise, right click "Microsoft USB Sync" and choose "Uninstall".

  When you connect your USB phone, it should appear in the device under Mobile Device Manager. Education invites you to look out there and if you find Microsoft USB Sync, uninstall it. If she is not there, go to the next step.

  Step 2:

  Disconnect, and then reconnect your device. Your device driver will be re - install and launch Windows Mobile Device Center.

• CAUSING SLOW WINDOWS SHUTTDOWN PROGRAM

  Mr President, I detect two programs downloadmr.exe and baasket.exe causing my window to shuttdown very slowl, I would delere it programs, but I can't find the place where they have installed ? How can I remove this program two suspects? Help me. Thank you.                                                                                                                                       OS - windows7 32-bit sp1 machine - dell inspiron 15r n5010 antivirus - quickheal total security

  HI Maria,

  Thanks for using Windows 7 and welcome to the Community Forums of Microsoft.

  According to the description provided, your computer takes more time to stop it.

  1. you get any error message when you try to shut down the computer?

  2. did you of recent changes to the computer?

  Follow a few troubleshooting methods and check if that helps.

  Method 1: Disconnect non-essential external devices and then restart the computer. Check if the problem persists.

   

  Method 2: Open the troubleshooting of System Maintenance Utility

  http://Windows.Microsoft.com/en-us/Windows7/open-the-system-maintenance-Troubleshooter

  Method 3: Perform a clean boot to see if there is a conflict of third-party software like the clean boot helps eliminate software conflicts.
  HOE to solve a problem by performing a clean boot in Windows Vista or in

  Windows 7 http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to put the computer to

  in normal mode.

  Also check the event viewer for event logs.

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  For reference:

  Optimize Windows 7 for better performance

  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this helps. If the problem persists, or if you have problems of Windows in the future, let us know and we would be happy to help you.

• Rename a hard disk will cause problems?

  When I got my new custom Windows 7 PC built last year, the technician just copied over my old XP, which was a Compaq machine. I don't know if he named the "Compaq" c: or if Windows automatically named that. What I want to do is to rename the drive to something more relevant, since this is a Compaq computer.

  If I rename the drive, it causes problems with the applications already installed on it?

  Thanks for your help!

  Cyndi

  Name change is OK. The drive letter (C:\ etc.) is the part you do not want to change (cannot change if Windows is installed on it), if the partition has installed software.
  If a partition has only the files that are not related (target or path) to any software, you can change the drive letter as well.

• No roaming profile tile problem windows 8 no clear pattern of how and why.

  Hi I have a fairly extensive network of windows pc 8

  I noticed a strange problem which does not seem to follow any particular model.
  When a new roaming user connects to a windows pc, 8 who was not already a profile they receive the message 'Hi' and the implementation of the etc pages once they see the new tiles page which is fine.
  However sometimes a new user will register in the "Hi" is displayed and set up takes a lot of time and when it finishes the new user has only 2 tiles... Internet explore and tile office!  If the user logs on to another computer, they may or may not have the tiles appear... This suggests that it is a local problem in the users on the c: folder.
  As I said this happens randomly with new users and this is quite annoying because it doesn't seem to be any idea why it does.
  Is this a bug?

  I found a way to fix it.

  1 log in as a user to discover that no tiles are present
  2. close the session
  3 log in as administrator
  4 open System
  5. open user profiles
  6 remove the user profile
  7. close the session
  8 open troubled as a user session
  9. the tiles are back!

  10. close the session

  11. open a session as administrator of PC

  12. open CMD as administrator

  10. run sfc/scannow from the command prompt and set the PC settings store tiles.

  The problem was when I used a 3rd third party tool called delprof2... I guess that the profiles were not removed correctly. Infact delprof2 corrupts the tiles from the local profile. This causes problems with the tiles does not not like laptop settings and store.

  You may ask why use delprof2? Well well the reason why I used delprof2 is that there are in the region of 100 profiles to delete and just, that takes too much time on each PC using the system / profile section... I don't know any alternative.

  So for correct (after execution of delprof2), it appears that you must first connect and see missing tiles then disconnect you and go as an administrator and delete the profile via the option of system profiles and then open a session as a troubled user...

  I really want to do underground work for us, because I can see the benefits of a beautiful beautiful screen with all work related icons at a push of a button, but the amount of problems, I hit when an area is absolutely crazy... makes me want to go back to the Start button...  At least with the Start button, you can easily add shortcuts... Unlike the subway tiles it is almost impossible to customize metro layouts over a wide area without tools such as oblytile...
  My conclusion is that it seems metro tiles are related to the local profile on the c: drive of each individual computer which is a little annoying when you have to hundreds of computers. It would be nice if metro settings have been configured on users roaming profile on the server.

  I'm getting the impression that Windows 8 was never designed for a corporate network * DUHH * and the metro is simply to home computers / tablets / mobile phone (consumers).

  Which is a shame.

  But I'm not giving up on hope...!

• Downing, one of my three guests will cause problems in vCenter?

  I need to update the firmware of the controller on my three hosts. The production server only virtual machine that we currently have a very low maintenance window. So I stopped all the virtual machines on the same host I can then shut it to the bottom/update the firmware on this host without causing problems with the rest of the vCenter environment? If I'm able to do, I have another question. Once guests are updates that are not hosting the production server I could move the production server VM to one of the servers updated until the host is updated and then bring him back?

  One of the reasons for getting a cluster is to avoid downtime in the event of a failure of the host, and/or maintenance. As long as the remaining guests have enough resources (CPU, memory) to run more virtual machines, there will be no problems.

  André

• enable intel XD, it will cause problems?

  I have ESXI4.1 hosts, hostsvc/hosthardware-vim - cmd command shows that xD is disabled. I want to activate XD, so that I can use EVC on the cluster. I'm having a failure on the site shut down all virtual machines, reboot the host and activate XD in the BIOS. Activating XD on host & VMs already build will cause problems. The guests are windows 2003 and 2008 R2.

  No it shouldn't cause any problems-