Similar Questions

• Connection of the GigE Vision camera

  Hello

  I develop a GigE Vision camera.

  I want to connect GigE Vision Camera to NIMAX.

  When you first connect GigE Vision camera, I can see the NOR-IMAQdx list devices. ("cam0:mycamera")

  When I click on "cam0:mycamera", a the IMAQ error has occurred.

  Error message is "cannot load the XML of the camera.

  Attached file is the package that was the problem.

  MAX OR send command "Read memory" to retrieve the device XML configuration file.

  (Package no. 11, 13: address 0x200, 0 x 400 memory read command)

  GigE Vision camera send response.

  (No. 12, 14 package: XML URL first choice, second choice of URL)

  I think the number of package 12 and 14 are erroneous data, but I can't find the point of evil.

  Advice me please on this issue.

  I would be greateful to receive the sample package.

  Thank you.

  Hi hkgige,

  These questions can be better adapted to the Committee mailing list GigE Vision standard, I suppose that your company would be a member to develop a device with the GigE Vision standard.

  However, I take a look at your track of package and I don't see anything that looks obviously incorrect. One of the reasons why the software could stop after reading the two URLS, is that he thinks he has already downloaded the file previously. These are cached in a directory on your local system (usually C:\Users\Public\Documents\National Instruments\NI-IMAQdx\Data\XML on Vista and Windows 7). Check if you have the XML file for your camera.

  The error you get usually indicates GenICam has some difficulty in parsing the XML of your camera. If you join the XML itself, I could see if this is the problem.

  Eric

• XML file for GigE Vision camera

  Hello

  I'm working on a model of GigE Vision camera. It should be very simple linescan camera. I put in place the necessary set of registers GigE Vision, can communicate with the camera in MAX. The problem is that I need creata this XML file for the camera. There is this here XML file:

  http://www.EMVA.org/CMS/upload/standards/GenICam_Downloads/SFNC_Reference_Version_2_0_0_Schema_1_1.x...

  What should I do with it? My first version of the camera will have 2 functions: turn on and off I'm confused, because the model xml file has many functions, I don't really have. Should I remove them? Or leave it inside with default values? That she needs a configuration minimum XML file?

  Kind regards

  Linus

  Hi Linus,

  If you look at the GigE Vision specification, you will see that there is a minimal subset of functionality that must be present for the camera be declared compliant. That's all what IMAQdx will need for the camera works fine. All other functions in the XML file that you downloaded are part of the SFNC (features Standard Naming Convention) defines the names/behavior for common characteristics that are often found on machine vision cameras. As a general rule, cameras implement a subset of these features. You should not let any features that are not implemented in the XML because it would be just confused because they would do nothing.

  Eric

• Measurement and automation - cannot initialize camera

  I am developing software to interact with GigE Vision cameras and having a visible Dalsa Genie HD camera I've used during development. I also have been using software OR measurement and automation to verify my software does what it is supposed to.

  Well everthing worked fine and nothing has changed except for a three-day weekend, but now I get a "IMAQ 0xBFF6902C error - unable to connect to the camera' when using the software OR measurement and automation. When I lauch the softwar I click 'Devices and Interfaces'-> "NOR-IMAQdx devices" and my camera picture appears in the list, but when I click on the camera to connect I get the error.

  I tried to connect to another camera with the exact same configuration (hardware and software), but everything works as it should.

  Any ideas? I tried a lot of things

  Thanks in advance.

  Troubleshooting of the GigE Vision cameras

  Also if you use multiple cameras are the names different to one another?

• should I get the 32 gig and increase storage icloud or get the 128 gig?

  Should I get the 32 gig and increase storage icloud or get the 128 gig?

  iCloud can't complete really the iPads of storage on board. You can't have apps to run from iCloud, you can't the films played to iCloud, etc...

  If you plan to use more than the 32GBs go for bigger sizes.

• How can I know if an external drive has been used for Time Machine and what computer it came with too?

  How can I know if an external drive has been used for Time Machine and what computer it came with too?

  I have several laptops and iMacs. I spent the relocation of the year and only used the MacBook Pro.

  Now I'm trying to figure out which drive goes with which computer

  I connected just a disk seagate 1.5 t and the first thing he did was to ask if I wanted to use it as a Time Machine drive.

  (1) if it is the TM disk accompanying this computer don't would not it have just started upward automatically?

  (2) what happens if I would have said yes?

  (3) I don't even know if it's been activated for TM. Is there a way to tell? It may hold just for iMovie files and other programs associated with a computer from my past.

  All readers of backup Time Machine contains a folder named: Backups.backupdb. If you open this folder, you'll find another folder with the name of the computer that has been saved. If several computers have been saved on the same disk, you will have several folders.

• What is the difference between the HX - 90v and HX - 80 coming cameras?

  What is the difference between the HX - 90v and HX - 80 coming cameras?

  Thank you!

  I'd say it's supposed to be a fill, a little brother to the HX90v

  It removes the control ring and the GPS, and I think the rest is the same.

  It is for those who want the HX90v but the price is a bit steep for the compact range, and they need not necessarily GPS or the ring of command, just a camera that works.
  This kind of thing, at least to my knowledge.

• How can I download photos and videos from my camera digital/dvr (panasonic sdr s50) to my computer that has windows MediaPlayer, WITHOUT erasing the cameras SD memory card?

  How can I download photos and videos from my camera digital/dvr (panasonic sdr s50) to my computer that has windows MediaPlayer, WITHOUT erasing the cameras SD memory card? (I am running windows xp professional).

  PS - I'm a senior and not warned, any computer do pls 'non technical' answers as possible.

  Thanks in advance for the answers to my question!

  Hello Fred!

  • First create a new folder by right click on an open space on your desktop
  • hover the mouse over the new, & click on new folder
  • right-click on the new folder and choose Rename
  • write your selected folder name
    
  1. Connect your data cable USB & POWER to the camera or insert the memory card
  2. Open the files and Select the files you want to save
  3. Select files butten now the mouse left click and move the mouse over the files
  4. then right click on the selected files and click copy
  5. go to the folder you named and open
  6. right-click and select Paste & that's it!

  I hope this works!
  Do not hesitate to ask, I don't mind!

• Code received the error 80004005 When you try to import photos and video from the camera in Windows Live Photo Gallery.

  Spent several hours in technical support with gun tries to resolve to not be able to download pictures from the camera to my Win XP computer.   Usually the computer detects the camera and demand "How would you import pictures?" and the list of shows in one window.   We don't get any list in this window, but only managed to fill the window briefly for WLPG to detect the photos and video, but when we went to import, we received the 8004005 error.   Thereafter, things have regressed, and we're back to not get any answer computer saying that it detects pictures or video - nothing.   But back to square one.

  There are two issues here - likely related: unable to import photos and videos and the 80004005 error.   Who came first and is there cause and effect here, and which way should we go?  Inquiring minds want to know - and being able to import photos and video of the camera Canon Powershot A3100IS again.

  After hours Technical Support Canon was completely blocked and indicated that it was probably an OS problem with my computer.

  Thanks for all your great suggestions.    I finally solve the problem, but I don't know exactly what fixed it.   I ended up running CCleaner (latest version) and make a 'windows', 'applications' and cleaning of "registry".   This needed a re-boot, and when I rebooted, it's when I could finally download the pictures from the camera.    Not exactly what fixed the problem, but there may be here spirits who may be able to say, ' Yes, with blah, blah, blah, you did...» ».

  As far as I know that is a lot of sterile technical support hours and re - install the software and then, finally, runing CCleaner paid off.    I will record your information in case I need it in the future... Thanks again.

• "I tried to load a Turbo Tax 2011 program and and the error message came up to the top -" D; "-is not a valid win32 application".

  "I tried to load a Turbo Tax 2011 program and and the error message came up to the top -" D; "-is not a valid win32 application".  In D, I got the TurboTax 2011 loading program. Can you help me fix this problem? E-mail address is removed from the privacy *.

  Split of: http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_install/win-32-file-missingwindows-xp/ee455a05-8e32-4353-9ab6-656f2cbd222d

  Pete,

  If you right-click "My computer" and select 'Properties', under the general tab, you should see your version of Windows XP... That said your current pack service is?

• 4506E Core and 2960S access IP Camera System switches

  Hi all

  I implement my first Cisco network and needed a little guidance. Here's the scenario and I wish that it works:

  • 2960S access switches will have cameras IP PoE and POS stations connected to them with the core fiber uplinks.
  • 4506E central office switch will have all the switches connected to the fiber SFP uplink ports access. All fiber optic cables are single mode with LC connectors.
  • All the cameras IP PoE and the other the camera server NETWORK card will be the 172.16.0.0/16 network and in case of default Vlan 1.
  • All computers of end users and a NETWORK card in the camera server will be on the 192.168.1.0/16 network and Vlan 2. 2 VLAN is needed as the main switch.
  • All stations of POS and stand-alone server POS will be on 192.168.20.0/16 and Vlan 3 switch network access and the base.
  • It will be a completely closed network, no internet access.
  • Computers end users will access video server with raids unicast.
  • All switches interconnect fiber SFP transceivers of 1 GB.
  • VLANs are not to communicate with eachother, just need to Vlan 1 and 3, be passed on to the switch base. It will be setting ports in the trunk switchport mode correct?
  • I gave all the devices static IP networks, with the exception of IP cameras that will get the IP Address of the DHCP server.
  • When I plug in a device of watt PoE 15.4, is the port set to auto detects by default so it lights camera or manually activate PoE on the port?

  -I have to run DHCP on central switch, only on the default Vlan 1 172.16.0.0/16 network so my IP cameras can obtain an IP address.

  IP dhcp pool cameras

  network 172.16.0.0 255.255.0.0

  default router 172.16.0.1

  -On the PoE IP camera and POS station ports I think following configuration:

  switchport mode access

  spanning tree portfast

  I would like to know what you think. I have a few weeks before they must go to the production. Any help and advice will be greatly appreciated!

  I will be checking periodically the thread and display updates.

  Yes I see!

  So with each carpet use "port 1' for each channel.

  for example

  If we have a stack, there that a single etherchannel, should therefore be port-channel 1 (the first 6). This could bind to the 4500 to Portchannel 1

  When we have the second battery, it will also be an etherchannel, which is the port-channel 1 (the first 6).

  This could bind to the 4500 on Portchannel 2

  and so on... The port-channel number is locally meaningful only so you don't meet for loops if its configured as suggested, etc...

  This way you can keep it simple and you will have ease of management in this way.

  No, there is no point linking medical examinations to configure

  Hope it makes sense.

  Please evaluate the useful messages, & mark as answer questions thank you.

• Problem between C40 and Panasonic AW-HE50HE camera

  Hi all

  We have identified a problem between C40 and Panasonic AW-HE50HE camera with HDMI connection.

  The Panasonic camera is configured with the 720 p output, and it can display on a LCD monitor.

  However, we have connected the camera C40 and Panasonic AW-HE50HE with HDMI connection, the C40 show black screen.

  The codec C40 is confirmed as well function and its specification declared support,

  1280 x [email protected]/ * /, 59,94 Hz (720 p 60)

  1280 x [email protected]/ * / Hz (720p50)

  Anyone can provide help for me, thank you,

  Ben Lai

  Hello

  Can you telnet to the codec with the camera connected and check if the codec no video camera and what is the detected resolution.

  Teck Chye

• RX100 ii how to take and keep 3 raw bracketed images and no not the camera to do hdr

  RX100 ii how to take and keep 3 raw bracketed images and no not the camera to do hdr.

  I want to have 3 separate raw images so that I can do HDR etc myself. How to configure this for example. + 1 0 - 1 EV exhibitions and be able to treat myself.  I want to be able to do this hand and align etc. later. I'd be satisfied with +.7 ev 0-. 7 if that's all he can do.

  Hi doshin! You can set the camera   (support: suite) by going into MENU 2 [Drive Mode]. In this mode, the camera allows you to shoot in 3 different exposures. You can also set the value of the show of support.

  If my post answered your question, please mark it as "accept as a Solution.

• OpenManage Version Essentials 2.0 Firmware gather and pilot inventory

  Ive installed 2.0

  I have 2 inventory servers via "iDRAC (server out of band)" "WS - MAN".

  now, I'm trying to collect the inventory FW so I can test the upgrade of the drac fw.

  No matter what I do "error at least select a server.

  but the servers are not displayed... If I create a new group and add them to the group,

  Group is visible in the window "create F/W and pilot inventory task" but when I check the box and try to finish, he says always "error at least select a server.

  

  I am sure that this particular task is required for in-band system updates.

  Looks like you are using out of band (iDRAC/WSMan).

  In this case, I think you're all ready to go.  You discovered via WSMan, now just go on manage | Updates system and you should be able to see your report compliance and update from there.  You have no need for this task, that you try to create.

  Can you let me know if go to the update of the portal page system works for you?

  Kind regards

  Rob

  delltechcenter.com/OME

• My IllustratorCS4, iMovie and iNdesign CS4 that came with my computer when I bought it about 4 years ago does not work after I was informed by a representative of Adobe until this day my computer. I still have the programs on my computer. How can I get re

  My IllustratorCS4, iMovie and iNdesign CS4 that came with my computer when I bought it about 4 years ago does not work after I was informed by a representative of Adobe until this day my computer. I still have the programs on my computer. How can I get the re install

  If you're ready to uninsntall, then reinstall, you can download at the bottom of the link;

  Download the CS4 products