100 simultaneous users can connect to an 11g SE 1 DB?

Similar Questions

• How many users can connect to Apple TV at the same time?

  How many users can connect to Apple TV at the same time?

  Your question is a little vague, what do you mean by "users that connect to AppleTV?

• How many users can connect to a hotspot of the iPhone 6?

  How many users can connect to a hotspot of the iPhone 6?

  I think it's 5.

• The client (Windows XP, Vista, Windows 7) users can connect to Microsoft Small Business Server 2008?

  Dear all,

  I intend to install on Server 2008 SBS Active Directory domain controller. In this session, I would like to know the client users can connect to the SBS server or not. If CAN, I want to know the steps & solutions on this answer and if NOT, why the clients could not connect to the SBS server.

  Server 2008 SBS can also be installed on the sequence of steps:
  SBS 2008 (AD, Exchange Server, SQL 2005 or 08, CRM4.0). It depends on the situation of the organization.

  I really want to know that, if we install steps on SBS 2008 above, can clients connect to the server?

  Kind regards
  Tun Aung Kyaw

  Hi Geraldine Tun.

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows Server forum.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• How to create a Web site that users can connect to?

  Hey guys

  How to create a Web site that users can connect to?

  How to create a site that users can connect to with steam, facebook, twitter, etc...

  See this discussion where a similar topic was discussed.

  Login using Muse and British Colombia page

  Thank you

  Preran

• Cisco ASA 5515 - Anyconnect users can connect to ASA, but cannot ping inside the local IP address

  Hello!

  I have a 5515 ASA with the configuration below. I have configure the ASA as remote access with anyconnect VPN server, now my problem is that I can connect but I can not ping.

  ASA Version 9.1 (1)

  !

  ASA host name

  domain xxx.xx

  names of

  local pool VPN_CLIENT_POOL 192.168.12.1 - 192.168.12.254 255.255.255.0 IP mask

  !

  interface GigabitEthernet0/0

  nameif inside

  security-level 100

  192.168.11.1 IP address 255.255.255.0

  !

  interface GigabitEthernet0/1

  Description Interface_to_VPN

  nameif outside

  security-level 0

  IP 111.222.333.444 255.255.255.240

  !

  interface GigabitEthernet0/2

  Shutdown

  No nameif

  no level of security

  no ip address

  !

  interface GigabitEthernet0/3

  Shutdown

  No nameif

  no level of security

  no ip address

  !

  interface GigabitEthernet0/4

  Shutdown

  No nameif

  no level of security

  no ip address

  !

  interface GigabitEthernet0/5

  Shutdown

  No nameif

  no level of security

  no ip address

  !

  interface Management0/0

  management only

  nameif management

  security-level 100

  192.168.5.1 IP address 255.255.255.0

  !

  passive FTP mode

  DNS server-group DefaultDNS

  www.ww domain name

  permit same-security-traffic intra-interface

  the object of the LAN network

  subnet 192.168.11.0 255.255.255.0

  LAN description

  network of the SSLVPN_POOL object

  255.255.255.0 subnet 192.168.12.0

  VPN_CLIENT_ACL list standard access allowed 192.168.11.0 255.255.255.0

  pager lines 24

  Enable logging

  asdm of logging of information

  Within 1500 MTU

  Outside 1500 MTU

  management of MTU 1500

  no failover

  ICMP unreachable rate-limit 1 burst-size 1

  ASDM image disk0: / asdm - 711.bin

  don't allow no asdm history

  ARP timeout 14400

  no permit-nonconnected arp

  NAT (exterior, Interior) static source SSLVPN_POOL SSLVPN_POOL static destination LAN LAN

  Route outside 0.0.0.0 0.0.0.0 111.222.333.443 1

  Timeout xlate 03:00

  Pat-xlate timeout 0:00:30

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  Floating conn timeout 0:00:00

  dynamic-access-policy-registration DfltAccessPolicy

  WebVPN

  list of URLS no

  identity of the user by default-domain LOCAL

  the ssh LOCAL console AAA authentication

  AAA authentication http LOCAL console

  LOCAL AAA authorization exec

  Enable http server

  http 192.168.5.0 255.255.255.0 management

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start

  Crypto ipsec pmtu aging infinite - the security association

  Crypto ca trustpoint ASDM_TrustPoint5

  Terminal registration

  E-mail [email protected] / * /

  name of the object CN = ASA

  address-IP 111.222.333.444

  Configure CRL

  Crypto ca trustpoint ASDM_TrustPoint6

  Terminal registration

  domain name full vpn.domain.com

  E-mail [email protected] / * /

  name of the object CN = vpn.domain.com

  address-IP 111.222.333.444

  pair of keys sslvpn

  Configure CRL

  trustpool crypto ca policy

  string encryption ca ASDM_TrustPoint6 certificates

  Telnet timeout 5

  SSH 192.168.11.0 255.255.255.0 inside

  SSH timeout 30

  Console timeout 0

  No ipv6-vpn-addr-assign aaa

  no local ipv6-vpn-addr-assign

  192.168.5.2 management - dhcpd addresses 192.168.5.254

  !

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  SSL-trust outside ASDM_TrustPoint6 point

  WebVPN

  allow outside

  CSD image disk0:/csd_3.5.2008-k9.pkg

  AnyConnect image disk0:/anyconnect-win-3.1.04066-k9.pkg 1

  AnyConnect enable

  tunnel-group-list activate

  attributes of Group Policy DfltGrpPolicy

  Ikev1 VPN-tunnel-Protocol l2tp ipsec without ssl-client

  internal VPN_CLIENT_POLICY group policy

  VPN_CLIENT_POLICY group policy attributes

  WINS server no

  value of server DNS 192.168.11.198

  VPN - 5 concurrent connections

  VPN-session-timeout 480

  client ssl-VPN-tunnel-Protocol

  Split-tunnel-policy tunnelspecified

  value of Split-tunnel-network-list VPN_CLIENT_ACL

  myComp.local value by default-field

  the address value VPN_CLIENT_POOL pools

  WebVPN

  activate AnyConnect ssl dtls

  AnyConnect Dungeon-Installer installed

  AnyConnect ssl keepalive 20

  time to generate a new key 30 AnyConnect ssl

  AnyConnect ssl generate a new method ssl key

  AnyConnect client of dpd-interval 30

  dpd-interval gateway AnyConnect 30

  AnyConnect dtls lzs compression

  AnyConnect modules value vpngina

  value of customization DfltCustomization

  internal IT_POLICY group policy

  IT_POLICY group policy attributes

  WINS server no

  value of server DNS 192.168.11.198

  VPN - connections 3

  VPN-session-timeout 120

  Protocol-tunnel-VPN-client ssl clientless ssl

  Split-tunnel-policy tunnelspecified

  value of Split-tunnel-network-list VPN_CLIENT_ACL

  field default value societe.com

  the address value VPN_CLIENT_POOL pools

  WebVPN

  activate AnyConnect ssl dtls

  AnyConnect Dungeon-Installer installed

  AnyConnect ssl keepalive 20

  AnyConnect dtls lzs compression

  value of customization DfltCustomization

  username vpnuser password PA$ encrypted $WORD

  vpnuser username attributes

  VPN-group-policy VPN_CLIENT_POLICY

  type of remote access service

  Username vpnuser2 password PA$ encrypted $W

  username vpnuser2 attributes

  type of remote access service

  username admin password ADMINPA$ $ encrypted privilege 15

  VPN Tunnel-group type remote access

  General-attributes of VPN Tunnel-group

  address VPN_CLIENT_POOL pool

  Group Policy - by default-VPN_CLIENT_POLICY

  VPN Tunnel-group webvpn-attributes

  the aaa authentication certificate

  enable VPN_to_R group-alias

  type tunnel-group IT_PROFILE remote access

  attributes global-tunnel-group IT_PROFILE

  address VPN_CLIENT_POOL pool

  Group Policy - by default-IT_POLICY

  tunnel-group IT_PROFILE webvpn-attributes

  the aaa authentication certificate

  enable IT Group-alias

  !

  class-map inspection_default

  match default-inspection-traffic

  !

  !

  type of policy-card inspect dns preset_dns_map

  parameters

  maximum message length automatic of customer

  message-length maximum 512

  Policy-map global_policy

  class inspection_default

  inspect the preset_dns_map dns

  inspect the ftp

  inspect h323 h225

  inspect the h323 ras

  inspect the rsh

  inspect the rtsp

  inspect esmtp

  inspect sqlnet

  inspect the skinny

  inspect sunrpc

  inspect xdmcp

  inspect the sip

  inspect the netbios

  inspect the tftp

  Review the ip options

  inspect the icmp

  !

  global service-policy global_policy

  context of prompt hostname

  no remote anonymous reporting call

  : end

  Help me please! Thank you!

  Hello

  Please set ACLs to allow ICMP between these two subnets (192.168.11.0 and 192.168.12.0) and check. It should ping. Let me know if it does not work.

  Thank you

  swap

• My laptop screen shows just the color of the cursor and background that other users can connect as usual

  Dell Inspiron 1525 Windows Vista, I can only log in safe mode please help!

  Hello
  
  Thanks for posting your question in the Microsoft Community forum!
  Description of the problem, it seems that you can only connect in safe mode on the windows vista computer.
  
   
  I would appreciate if you can help me with the following information.
  
   
  1. don't you make changes to the computer before this problem?
  2. you receive an error message/code?
  
   
  Try these methods to start the computer in normal mode.
  
   
  Method 1
  Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.
  http://support.Microsoft.com/kb/929135
  Note: After completing the steps in the clean boot troubleshooting, follow step 3 of the link to start the computer to a Normal startup mode.
   
   
  Like the other users can log on as usual. Try to perform a restore of the system in safe mode.
   
   

  Methoad 2

  Try to run in safe mode system restore.

  Step 1
  Try to start the computer in safe mode, here is the link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2
  Once you start the computer in safe mode, try to perform the system restore and check that if it helps, here is the link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  It will be useful.
  Let us know if you encounter problems under windows in the future. We will be happy to help you.
   

• Standard user can connect to the new network wireless only in local mode - no Internet pass through by the router.

  My wife now takes a laptop (HP Pavilion) with her on a business trip.  The computer that runs Windows Vista Ultimate 64-bit SP2 with all updates.  I have his set as a standard user account, just to keep him out of trouble.  However, with his own account, it can connect to a new wireless network, like a hotel or business she visits could offer.  But, invariably, she gets access 'local only' - no pass Internet through connectivity.  I had to give him the information of my account as an administrator, and then she is able to connect without difficulty.

  Of course, this isn't an ideal situation - standard user must be able to connect to the Internet through a new wireless network.  Otherwise, I should be able to change his account in such a way that it can be given to this authority without necessarily opening the entire system and its related vulnerabilities.
  Any help, suggestions or solutions?

  Hello

  I suggest you go through the information provided in the following link.

  http://TechNet.Microsoft.com/en-us/library/bb878035.aspx

• After upgrading to 7.6.100.0 user cannot connect wireless

  We have a 5508 internal controller that has two SSID on it.  A SSID secured which uses an ACS server to authenticate users through AD and a guest SSID on the tunnels to an anchor DMZ 5508 controller.  Guest users have no problems.  We have improved our controllers to 7.6.100.0 about 3 weeks ago.  Since then, we have had a problem with the path of data, as the controller of the anchor is down and came only after the internal controller is restarted.  It was the 1st issue.  In recent days, I had users from across the country say that they are unable to connect to our secure network.  All users have Win7 machines.  All they see is the sign of performance of yell, on their Wi - Fi connection.  In the network and sharing Center, they see the wireless network, listed as an unidentified network (public network).  GBA, users are authenticate with no problem (I can see it in the journals of the ACS), and they receive an IP address.  However, they have absolutely no connectivity.  I have them try to ping the default gateway, subnet on which they are assigned, and he returned with the request timed out.  Of course, they are unable to access internet, or anything, because they have no connectivity to their front door.  I restarted the internal controller (thinking that there must be a deadlock, as the anchor of path of data issue) that did not work, I have blown away the SSID and recreated.  That did not work.  I even restarted the ACS, although it was not a problem.  It seems that all users who are connected before the show and have no stop of their PCs, are ok.  Users who have closed or withdrew their computer, secure wireless network profile, can no longer connect.  They get just that the network is not identified.  I do know that if there was any sort of update Win7, or some other grow, but I assure you that from the point of view WLC, no problem.  Thanks for any help!

  There is an open with v7.6 and of 3600 and 3700's question.  Users are in the executing State, but they lose the layer 2 connectivity.  Ther will soon be a patch out of the public for issues with the 3700's, which affects customers who are on the 5 ghz only.  With the 3600 problem seems to be with 5 GHz and 2.4 ghz but with 802.11n not customers.  It is what I tested and what Cisco has been able to replicate.  If you do not need to be on v7.6, unless you have the 3700's, I suggest you go to v7.4.121.0 or v7.5, if you need help for the 3600 module 802.11ac.

  Thank you

  Scott

  Help others using the system of rating and marking answers questions like "answered."

• users and internet accounts. -Account that a single user can connect to the Internet at the same time

  When I am connected to the computer, and I 'switch user' other user accounts, cannot connect to the internet, unless I have complelty "log off." How can I fix? I should be able to stay connected with the windows open, so I can continue when I get back.

  I should be able to stay connected with the windows open, so I can continue when I get back.

  It depends on your network, there'S no connection.  For example, it could certainly happen to a user who was logged only under that user.   However, in this case instead of completely disconnected the first account you could probably have the first account log out and hang up the connection.  Then the second account probably could dial and connect.  FWIW, I think a DSL PPPoE user might see similar symptoms.

  Robert Aldwinckle
  ---

• Guest user can connect to my main account without password

  Hello. I had two accounts in my laptop, a my main account and the other is the guest account. My friend has restarted the laptop using the guest account. After this restart, it automatically to connect to my main account without any password. I don't want people to easily connect to my account without type in any password. I filmed a video as well. I can send if necessary. Is it possible to fix this? Any help would be appreciated. Thank you.

  Disable the automatic connection

  Set your Mac to automatically connect on startup - Apple Support

• How many users can be connected

  Hello

  Could you help me, I want to know how many users can connect to these routers:

  EA6350

  WRT AC1900

  And we have CWMP

  Concerning

  Thanks for the info.

  I recommend that you include in your comment and possible purchase router, a router of class business. EA and WRT series routers are routers of class home and can't function in a class environment business or offer what you need in a configuration of class business. I recommend that you call, contact Linksys or sales support and ask them what model router would be better suited to your needs before you buy. Would avoid probably no dispute afterwards. Good luck.

• How user by VM (XP) can connect at the same time?

  Hello guys,.

  We test VMware View 4 and so far work fine, but I have a question? How many user by VM can connect at the same time? I test with 2 VM (XP) in the pool, but I want to use more than 2 users, but when I try to login doesn't say "no resources available", what that means is that a single user by VM? Us who is running Terminal Server and try to find alternatives.

  Thank you

  It's the same as with a XP machine. 1 single user can connect at the same time.

  André

• How to create users that can connect to the application?

  Hello
  
  
  As an example of Application provided by APEX, in this application, the administrator can create users and reset passwords, and the user can connect to this application. How is this happening?
  
  Now I know how to create users and reset passwords through the corresponding working table.
  
  But I don't know how to use the user to to connect to the application? I tried several times to use the user create by ADMIN to connect to the application, but I failed.
  
  I can't find any setting in the sample Application, but it do.
  
  If any good plans?
  
  I thank in advance.

  There are two ways you can handle this... Build users of the APEX and continued them through the api of the APEX (not recommended by what I saw several comments here, outside the development environment) OR in your application, you could build a custom authentication system...

  Here is a link to explain how make one:
  http://djmein.blogspot.com/2007/07/custom-authentication-authorisation.html

  Thank you

  Tony Miller
  Webster, TX

• Cisco NAC appliance - after a success does not change users to connect to the vlan propper

  Hello

  I am new to cisco NAC BURNERS and I have to troubleshoot an implementation. It is a real OOB IP gateway configuration. Users can connect to the Pentecost the CCA, but after the connection of this success, they remain on the role not authenticated, as well as on this vlan. I checked the SNMP protocol and seems to work very well. Also, I checked the logs on nac_manager.log and there is nothing surprising, in fact I see nothing about this user or IP address that connects.

  Also the user does not appear on the list of users online on cam.

  Can someone help me figure out how can I fix? version 4.8, I'll post any information requested

  Thank you

  We recently had the problem with Windows AD SSO and Windows 7 clients.

  Would authenticate the XP clients very well, however, Windows 7 clients would not authenticate and will remain just on the authenticated vlan.

  Our question was looking for CASE SSO account, we installed on AD. It only support the encryption, WHICH has no Windows 7 64. We turned off "Use OF THE encryption" on the account authentication UNIQUE AD and re-tested.

  What are the parameters of the port-profile to which is applied the switchport?

  What is the map settings vlan ports trunk not approved or confidence?