10000 + files in BAR - that the packet is permitted max?

Similar Questions

• I accidentally loaded a .iso file on my PC and can not get rid of it. When I try to delete the file it says that the file is opened by the system. Also the file created 3 virtual drives like E:, F: and G: __Please let me know how I can remove this .iso

  I accidentally loaded a .iso file on my PC and can not get rid of it.  When I try to delete the file it says that the file is opened by the system.  Also the file created 3 virtual drives like E:, F: and G:
  Please let me know how I can remove this .iso file.

  Try Safe Mode. Repeatedly press the F8 key as the computer starts getting the menu diagnosis. Use the arrow key to select Mode without failure. MS - MVP - Elephant Boy computers - don't panic!

• Install file LIVE BAR in the BB Tablet

  Hi all

  Please help me if someone has an idea.

  I need to install direct queue bar in Blackberry tablets? I can install it like COD and Jad file located in the smartphones of BB. Or can I push bar file through BES?

  In the affirmative, please let me know the link. or any other solution?

  Thank you!

  I've seen users able to install App World or files of load bar side via the developer mode.

• Unable to delete the file, it indicates that the file is open

  When I try to delete a single file came from window and say girl is open in BS downlouder

  Try Safe Mode.    To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode.

  If it does not, start the command prompt via the same menu allows to get in safe mode.  Then use the DELETE command.

  Good luck.

• Need help with "error opening installation log file. Ensure that the specified location exists and is writable. »

  I tried about 4-5 other solutions to this problem, but none of them work yet.

  I installed the Windows program to copy (Cloud Computing service) and used for a few months. I uninstalled it and then a week or two ago. Now I want to reinstall it, but I get the above error message. I am running Windows 7 64 bit. All solutions?

  I tried about 4-5 other solutions to this problem, but none of them work yet.

  I installed the Windows program to copy (Cloud Computing service) and used for a few months. I uninstalled it and then a week or two ago. Now I want to reinstall it, but I get the above error message. I am running Windows 7 64 bit. All solutions?

  Hello

  You must go to the Copy.com website, sign in with your credentials and access the support options.

  They should be able to advise how to reinstall the product.

  Concerning

• Is that the HDS rejects fragmented packets?

  Hello

  I'm trying to understand if it's funny question on our SC8000 6.6 OS or on purpose (and if so, why?).

  Sending packets (ping - l) larger that the MTU configured on the server returns a timeout.
  It doesn't matter if I'll put any 9014/4088/1650. These servers have no problem Ping between them in any scenario.

  I went through the example pages 22-23 here http://en.community.dell.com/cfs-file/__key/telligent-evolution-components-attachments/13-4491-00-00-20-43-79-24/Windows_5F00_Server_5F00_2012_5F00_R2_5F00_Best_5F00_Practices_5F00_v2.pdf
  It was nice to find. but phrases it give me not defiant conclusion if when not using the parameter f fragmentation works or not.

  Here is my result when it is configured for 9014:

  non-fragmented larger than server MTU to HDS - failed (planned)

  C:\>ping 10.1.158.13 f-l 10000
  Ping 10.1.158.13 with 10000 bytes of data:
  Packet needs to be fragmented but DF parameter.

  non-fragmented works smaller than server MTU to HDS - (planned)

  C:\>ping 10.1.158.13 f-l 8968
  Ping 10.1.158.13 with 8968 bytes of data:
  Reply from 10.1.158.13: bytes = 8968 times<1ms ttl="">

  fragmented to HDS - failed (it is planned?)

  C:\>ping 10.1.158.13-l 10000
  Ping 10.1.158.13 with 10000 bytes of data:
  Request timed out.

  fragmented to another server - works (planned)

  C:\>ping 10.1.158.26-l 10000
  Ping 10.1.158.26 with 10000 bytes of data:
  Reply from 10.1.158.26: bytes = 10000 time = 2ms TTL = 128

  Thank you

  Gidi

  Hello

  So. It's always nice to come back on the forum with the answer.and cannot be the following through the void. So here it is.

  YES. the HDS is not to respond to ping fragmented.  but we had a different behavior that we could not explain, even with the indicator f. instead to get the answer that the packet needs to be fragmented, we got the ping timeout for the size of the packets between 8968 8972:

  C:\>ping 10.1.158.13 f-l 8969
  Ping 10.1.158.13 with 8969 bytes of data
  Request timed out.

  So we saw this as a black - hole.we we are really concerned to find that point, but when you take the packet trace that I found something interesting. on any ping response above 62 bytes the HDS also return four bytes of the trash at the end (well that's the look as it puts even more of the CBA after the image)
  

  We tested it on another system that has a different configuration, on that we that we have had no black hole.  another trace fast package (down at the bottom), we saw that the server receives frames of to1918 bytes (the card configured to 9014 accepts but still above).
  so - two questions, both seems to be with HDS pings to the
  1 compellent adds garbage four bytes to packets of bytes 62 more ping response.
  2 compellent allow the ping response on 9014Bytes that are lost by our NIC (but seems to be only for ping).

  because we dug it good enough only to ICMP. I don't have keep trying and captured anywhere else on the wire.
  

  Our configuration:
  Compellent SC8000 OS 6.6.5.19, Chelsio T320 Dual Port LP Vlan tag, related to the Nexus 5 k.  Political status for all the ports mtu 9216 connected to a Board card intel X 520 configured with MTU 9014.
  

  .
  
  

   

   

  Map of Mellanox on another system that receives more than 9014bytes framework, BTW, that system also receives no responses to pings fragmented)
  

  
  

   

• Files with the help of Transcend F25 external USB Drive: copy, but I don't see that empty folders (disk size indicates that the files are still there, though)

  Hello-

  I use Windows 7 Professional and everything seems to work very well. I joined my new Transcend f25 USB (300g) to use for backups. I copied on about 20 concerts of archives and had run Windows it's first backup.

  Everything seemed fine, and the available space on the disc is now about 230g, that sounds right. The problem is I see only empty folders on disk!

  Now, I know with certainty that the files are there because I tried to plug the drive in an old laptop XP - bingo there was all my files! Can someone advise me? This seems to be a configuration problem, or maybe a drive error. The files were there when I added in the first place, however, is very strange!

  How can I see my files? Help!

  Thanks, Dave

  Check the disk for errors by using this procedure.
  1. open the computer by clicking the Start button, click computer.

  2 - Click on the drive you want to check, and then click Properties.

  3. click on the Tools tab and then, under check for errors, click Find now.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  To automatically repair problems with files and folders that the scan detects, select automatically fix file system errors. Otherwise, the disk check will be a problem, but not to fix them.

  To perform a thorough check, select search and attempt to recover bad sectors. This analysis tries to find and repair physical errors on the disk itself, and it may take much longer to complete.

  To check for errors file and the physical errors, select both automatically fix errors in file system and search for and attempt recovery of bad sectors.

  4. click on start.

  Kind regards.

• Bar of the active window, the missing or hidden menu bar

  Today after opening a PDF file, my bar of the window active (top) and the Acrobat menu bar would not display. It is Acrobat 9.5.5. Instead of giving me the normal bar of the active window and the menu bar, it would give a gray buttons Acrobat menu. Whenever I have it back to normal via F9, just not like this. It's extremely frustrating. I can't find any setting in preference to the difficulty of this return to normal for good. Help, please. Thank you.

  Hi Jack,

  You have installed Kaspersky Antivirus software?

  Please update of Kaspersky (KIS 2015) to its latest version 15.0.1.415 and that should solve the problem.

  See the Kaspersky forum thread: http://forum.kaspersky.com/index.php?showtopic=307391&hl=Adobe

  Kind regards

  Rave

• How to save the data to the new file, when you press the button

  Hello.

  Run a program that reads data recorders seconds and displays a trace on the screen.

  What I want, is that when I press a button, the program will ask for a file name and begins to record data to the file, and continues to do this as long as the button is pressed.

  When I press the button again, the program asks the name of the file again, so I can select a new file to write.

  I've included a simplified version of my program that works by asking the file name at the beginning.

  How can I change the program it starts a new file every time that the key again.

  Kai,

  I changed the example that I gave you to LV8.0, but I have never used the option 'Save for the previous version' before, so I don't know if it will work.

  I have combined the start and stop of recording in a single button (just change the text to all what you need) and I used the 'value' property to pass the path between cases. The path can be formatted as you have in your version, don't forget to use the string conversion function filepath.

  Just in case where it doesn't work on your version of LV I've attached a screenshot of the block diagram.

  Hope this helps, let me know if you have more problems with this.

  Easy.

  Darren.

• Try to copy a folder with subfolders, some don't copy, get the message that the folder names are too long under Windows 7

  Hi, when you try to copy a folder with lots of subfolders, some files don't copy.  I get a message that the folder names are too long, and the only option is to ignore these files.  Anyone know the maximum folder (and also) name length that will copy windows 7?

  Thank you

  Steve M

  Hello
   
   
  a. What are the data you're trying to move?
  b. what operating system (for example Windows files) files?
  c. What is the method that you use to copy data?
   
   
  Windows 7 supports filename up to 260 characters. I would ask you to decrease the characters in the file name and then try to copy the files.
  
  Let us, run disk checking hard disk utility and then check.
  Here's how:
  1. open the computer by clicking the Start button, click computer.
  2. click on the drive you want to check, and then click Properties.
  3. click on the Tools tab and then, under check for errors, click Find now. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  To automatically repair problems with files and folders that the scan detects, select automatically fix file system errors. Otherwise, the disk check will be a problem, but not to fix them.
  To perform a thorough check, select search and attempt to recover bad sectors. This analysis tries to find and repair physical errors on the disk itself, and it may take much longer to complete.
  To check for errors file and the physical errors, select both automatically fix errors in file system and search for and attempt recovery of bad sectors.
  4. click on start.
   
   
  Depending on the size of your drive, it may take several minutes. For best results, do not use your computer for any other tasks while it checks errors.
   
  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• CC works on all my other devices except my laptop. CC files everywhere are not the synchronization in the folder of files on my computer cloud creatives.

  CC works on all my other devices except my laptop. CC files everywhere are not the synchronization in the folder of files on my computer cloud creatives. When I try to open it online, it gives me the error message which is something like "this page is temporarily unavailable. We will return soon. "and"we are working to solve the problem quickly and we're sorry for the delay. Please check back or visit our site in the status updates. "But then I go to the website of the State and either, he said all 'normally works' where it says there is an error but it was"resolved"but error sign icon still appears in the menu dropdown. What should I do to solve this problem and come back if it is old auto synchronization?

  Hello:

  Could it please check the synchronization of files is enabled in your application of creative cloud? Please go to the creative cloud > creative cloud > files and verify that the synchronization on / off is on. If your synchronization of files has been enabled, but you still cannot sync assets compared to the clouds in your local creative cloud files folder, then we need more information to understand your question. Could you please use the log collector (https://helpx.adobe.com/creative-cloud/kb/cc-log-collector.html ) and send me the zip file on your two [email protected]machines? And please, please provide the information below:

  • Adobe ID:
  • Forum post link:
  • File or folder of the specific names that are affected:
  • You use creative collaboration Cloud:
  • How many computers you use with creative cloud:
  • Type of internet connection (Ethernet/WiFi):
  • Using a proxy (Y/N):
  • Firewall (no/company/Local):

  Best regards.

  Lin

• There is a bar on the left side of my screen that has menus labeled "file Taks', 'Other locations' and 'Details' drop-down. How can I get rid of him?

  Original title: appearance of office.

  There is a bar on the left side of my screen that has menus labeled "file Taks', 'Other locations' and 'Details' drop-down.  How can I get rid of him?

  Use according to the following seems easier for you (hint: the first link is exactly the same as "Method B" to the second link):

  http://www.dougknox.com/XP/scripts_desc/xp_commtask_desktop.htm

  http://www.askvg.com/how-to-remove-annoying-common-tasks-from-desktop-in-Windows-XP/

• How to restore the 'details' bar that shows the metadata of the files?

  At the bottom of the Windows Explorer window, there is usually a bar that displays data from all of the files selected, such as name, size, year, title, etc.. It is called 'bar details' or 'window details '. Once I clicked on this bar and chose to disappear, I couldn't find how to restore.

  I looked in the control panel and in the options folder, but in vain.

  I need to know which option and where is responsible for the restoration of this facility. It is very important to me and if anyone could help me I would appreciate it.

  Hello

  Start - computer or Windows Explorer - click on organize - Layout - pane

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• I don't see the status bar at the bottom of the screen. How can I get that back?

  Something has changed. The status bar disappeared. The only way I seem to be able to leave Firefox is to close.

  First of all, you can check that Firefox is not in his view full screen where the Windows task bar is hidden. The F11 key toggles between the normal modes and full screen.

  If Firefox hides the taskbar of Windows in normal mode, a file that stores the dimensions of Windows Firefox may be damaged. If you are not able to resize the window manually, you can delete this file for Firefox back to its original size.

  To try to manually resize:

  Press Alt + space to display the system menu of the Firefox window, and then click the size (or press S) and press the arrow down once, then the arrow upwards once. This will usually move the bottom of the Firefox window to the visible area of the screen. If it is not visible, try pressing the arrow upwards several times, or for a while. To complete the editing of size, press ENTER.

  If the window is maximized, then size is grayed out. This is normal, and this method won't help.

  To delete the settings file:

  Open the settings folder (AKA Firefox profile) current Firefox help

  • button "3-bar" menu > "?" button > troubleshooting information
  • (menu bar) Help > troubleshooting information
  • type or paste everything: in the address bar and press Enter

  In the first table of the page, click on the view file"" button. This should launch a new window that lists the various files and folders in Windows Explorer.

  Leave this window open, switch back to Firefox and output, either:

  • "3-bar" menu button > button "power".
  • (menu bar) File > Exit

  Pause while Firefox finishing its cleanup, then rename xulstore.json to something like xulstore.old. If you see a file named localstore.rdf, rename this to localstore.old.

  Launch Firefox back up again. Windows normally appear again?

  You can activate missing bars (menus, toolbar bookmarks bar) using the list on the toolbar, which you can view by using one of the following:

  • Right-click on a zone empty of the tab bar, or click the "+" button on the tab bar
  • Press the Alt key to activate the classic menu bar, and then view > toolbars
  • on the Customize tab, use the button "show/hide Toolbar" (controls, buttons, and Toolbars Customize Firefox)

  Any improvement?

• ff22 has two high bars of the page, who act in the same way at the same time. In addition, the BACK button would not light on many web pages. This means that I cann

  Problem #1.

  First the top bar has a logo of firefox in the upper left corner and the words "Ask a Question/Mozilla Support-Mozilla Firefox" are on the right side of the logo. The first bar of the high a minimize, overlap and close the buttons at the top right. When I click on the logo, a short menu unfolds, has a choice as ' restore "..." "" loved ones ".

  The second bar from the top has the word "Firefox" in the upper left corner with an arrow down beside him. They resemble contrast white letters on an orange background of a huge button. When I click on it, displays a menu double glazing. He has a lot of choice as the new tab, new window private... Favorites, history, download... out. The second top bar has also minimize overlap and close the buttons at the top right, too. There are 7 Word securities "file, editing, display, history, bookmarks, tools and help" under this huge button orange at the top left. The logos and the address bar is less than 7 words.

  I don't have 2 best bars. They worry too much about property screen.

  Problem #2
  The BACK button isn't light upward, and may not work on many web pages.

  Thank you

  Looks like it is an application or a Firefox extension that causes this problem.

  You can start Firefox in safe mode to identify the problems: http://mzl.la/MwuO4X

  In addition, this article may be of interest to you: http://mzl.la/NjT73w

  --

  In addition, you can try to do a reset software Firefox, if you are not able to solve this problem: http://mzl.la/MnSTZB