1074396995 error occurred at Sequence.vi IMAQ
Hello
I'm trying to capture a sequence of images using a suitable program of "Sequence and save at AVI.vi. Initially the VI worked fine, but when I tried to run the same VI today I get the error
1074396995 error occurred at Sequence.vi IMAQ
Possible reasons:
NOR-IMAQ: Hardware for the acquisition of the image you requested is already in use.
When I try to write a simple program to retrieve an image or image acquisition using MAX, I am able to get the image without errors. But when I use the modified program, I get the above error. I made sure that no other program navigate to the camera while I run the VI. I also joined the program.
What causes the error?
Thank you best regards &,.
Sandeep
Hello
I foud out what was causing the problem, a stupid mistake from my end, but a totally misleading error of LabVIEW.
I had created an IMAQ session but do not connect the session to the vi IMAQ sequence for the capture of the image did not. If anyone from National Instruments is looking at this message, please make sure that it is noted and fixed so that in a situation like this, the correct error is displayed.
The corrected VI is attached.
Thank you best regards &,.
Sandeep
Tags: NI Hardware
Similar Questions
-
The TIFF to write IMAQ 2 - 1074396154 error occurs when saving a camera, but not two
Hi all
I have a program I customized based on example programs (e.g. triggered Grab loops producer-consumer) LabVIEW. The VI allows the user to choose the number of cameras they would like to use for acquiring (between 1 and 4), as well as the trigger source - either a constant material counter or a manual release that is connected to a digital input.
Acquisition works very well with any number of cameras (using a loop of producer), however I'm running on an issue to save images in the loop of the consumer. Frames are removed during the registration process, when I have the 1, 3 or 4 cameras option selected. I get error 1074396154: Image is not big enough for the operation. This question is somewhat improved by hard-coding the size of the image of 1280 x 1024 (as suggested here), but a loss of image is still intermittent. I never ran into this issue using the 2-camera option.
I have attached my code here. Anyone has any advice on why this error occurs only in some cases? Is there a setting that I need to configure for IMAQdx?
Many thanks in advance,
Tracy
Unfortunately the code is too big and can not look in every corner.
S ' Please try using SubVIs to make the simplest code: http://www.ni.com/white-paper/7593/en/
-Coming from another question, IMAQ Create(User Buffer) creates the reference to the image.
-You create an image to copy image to this place, you get from IMAQdx Grab.
->, You are able to see the image in indicator Camera1?
-> Use your Get size vi after grab and internal image structure deal just before enqueueing and see if it is to have the image size valid.
-Now let's say that if you get another picture before saving this image, then the image will be replaced.
-So if your writing process is too slow, you must create the buffer sufficient user.
-> In your loop of consumption within case accession after unbundling image thread: https://zone.ni.com/reference/en-XX/help/371361H-01/lvhowto/using_the_probe_tool/
-
Error occurred during deployment of TS and the LabVIEW run-time engine only
Hi all
I'm new to Teststand deployment.
Now, I want to deploy a program to clean install with SP1 2012 Teststand engine, LabVIEW 2012 SP1 Runtime, VISA 5.2 DURATION.
My file in the sequence is empty. (In fact with a label only)
But I got "Internal error code - 12 making an installer... ", and" MSI error code: 110 ".
Attachment is the newspaper.
Any Suggestion? Thank you.Thanks to KateB.
Now I find out why an error occurred.
I installed LabVIEW 2012 first, then crushed with LV 2012 SP1 but no uninstall.
I think it makes Teststand to be comfused or maybe something conflict.
Now I install LV 2012 or LV 2012 SP1 only. It works very well.
-
Following error message encountered when installing SSO64 bits on Windows Server 2008 R2 Standard 64-bit edition.
Error 1935.An error occurred during the installation of Assembly component {98CB24AD-52FB-DB5F-A01F-C8B3B9A1E18E}. HRESULT: 0X800736CC.
[12:40:34 of Info] List MessageBox with text: Error 1935.An error occurred during the installation of Assembly component {98CB24AD-52FB-DB5F-A01F-C8B3B9A1E18E}. HRESULT: 0X800736CC. Return code: 1I tried to reinstall VC ++ 2005 SP1 Redistributable, but it did not work.
I tried to rename a folder for vc ++ in the winsxs folder, but without permission to do so.
Here's the Setup log:
= Recording started: 01/03/2012-12:40:11 Build type: SHIP UNICODE 5.00.7600.00 appeal process: C:\Users\SA_KPN~1\AppData\Local\EBZ28334.tmp\Setup.exe =.
MSI (c) (C0:58) [12:40:11:525]: Resetting cached policy values
MSI (c) (C0:58) [12:40:11:525]: value of strategy Machine 'Debug' is 0
MSI (c) (C0:58) [12:40:11:525]: * RunEngine:
Product: SSO x64\SSO64\SSO64.msi
Action:
Command line:
MSI (c) (C0:58) [12:40:11:525]: Client and UI is none or basic: full installation running on the server.
MSI (c) (C0:58) [12:40:11:525]: grabbed execution mutex.
MSI (c) (C0:58) [12:40:11:525]: Cloaking enabled.
MSI (c) (C0:58) [12:40:11:525]: attempt of activation of all disabled privileges before calling install on server
MSI (c) (C0:58) [12:40:11:525]: meter is incremented to disable the stop. Counter after increment: 0
MSI (s) (C AC:3) [12:40:11:525]: running the installation inside the multi-package transaction \SSO x64\SSO64\SSO64.msi
MSI (s) (C AC:3) [12:40:11:525]: grabbed execution mutex.
MSI (s) (AC:64) [12:40:11:525]: Resetting cached policy values
MSI (s) (AC:64) [12:40:11:525]: value of strategy Machine 'Debug' is 0
MSI (s) (AC:64) [12:40:11:525]: * RunEngine:
Product: SSO x64\SSO64\SSO64.msi
Action:
Command line:
MSI (s) (AC:64) [12:40:11:540]: meter is incremented to disable the stop. Counter after increment: 0
MSI (s) (AC:64) [12:40:11:540]: value of strategy Machine 'DisableUserInstalls' is 0
MSI (s) (AC:64) [12:40:11:540]: meter is incremented to disable the stop. Counter after increment: 1
MSI (s) (AC:64) [12:40:11:540]: SRSetRestorePoint is ignored for this transaction.
MSI (s) (AC:64) [12:40:11:540]: disable the stop against the decrement. If counter > = 0, will be denied the stop. Counter after decrement: 0
MSI (s) (AC:64) [12:40:11:540]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer 3:2
MSI (s) (AC:64) [12:40:11:571]: file will have the applied safety of OpCode.
MSI (s) (AC:64) [12:40:11:587]: disable the stop against the decrement. If counter > = 0, will be denied the stop. Counter after decrement:-1
MSI (s) (AC:64) [12:40:11:587]: STRATEGY of RESTRICTION SOFTWARE: Verifying package--> 'SSO x64\SSO64\SSO64.msi' against the software restriction policy
MSI (s) (AC:64) [12:40:11:587]: STRATEGY of RESTRICTION SOFTWARE: SSO x64\SSO64\SSO64.msi has a digital signature
MSI (s) (AC:64) [12:40:21:603]: STRATEGY of RESTRICTION SOFTWARE: SSO x64\SSO64\SSO64.msi is allowed to run at the level of authorization 'unlimited '.
MSI (s) (AC:64) [12:40:21:603]: dialogue of end not activated
MSI (s) (AC:64) [12:40:21:603]: original ==> SSO x64\SSO64\SSO64.msi packing
MSI (s) (AC:64) [12:40:21:603]: we're running out of ==> C:\Windows\Installer\1ebf5f91.msi package
MSI (s) (AC:64) [12:40:21:619]: APPCOMPAT: replacements of compatibility mode properties found.
MSI (s) (AC:64) [12:40:21:619]: APPCOMPAT: looking for entry with ProductCode '{F89B22BC-2768-4237-B300-5CFA52D9AC84}' appcompat database
MSI (s) (AC:64) [12:40:21:619]: APPCOMPAT: no matching ProductCode found in the database.
MSI (s) (AC:64) [12:40:21:619]: MSCOREE already loaded, using the loaded copy
MSI (s) (AC:64) [12:40:21:619]: value of strategy Machine 'TransformsSecure' is 1
MSI (s) (AC:64) [12:40:21:619]: value of strategy Machine 'DisablePatch' is 0
MSI (s) (AC:64) [12:40:21:619]: value of strategy Machine 'AllowLockdownPatch' is 0
MSI (s) (AC:64) [12:40:21:619]: value of strategy Machine 'DisableLUAPatching' is 0
MSI (s) (AC:64) [12:40:21:619]: value of strategy Machine 'DisableFlyWeightPatching' is 0
MSI (s) (AC:64) [12:40:21:619]: APPCOMPAT: looking for entry with ProductCode '{F89B22BC-2768-4237-B300-5CFA52D9AC84}' appcompat database
MSI (s) (AC:64) [12:40:21:619]: APPCOMPAT: no matching ProductCode found in the database.
MSI (s) (AC:64) [12:40:21:619]: transformations are not secure.
MSI (s) (AC:64) [12:40:21:619]: PROPERTY CHANGE: adding MsiLogFileLocation property. Its value is ' C:\Users\acc\AppData\Local\Setup(030112 124011) .log.
MSI (s) (AC:64) [12:40:21:619]: command line: ADDLOCAL = froot, server, SSOMMC, Admin, Pwdsync INSTALLDIR = c: Files\Enterprise Single Sign - dans\ FILESINUSEERROR = CURRENTDIRECTORY=C:\Users\acc\AppData\Local\EBZ28334.tmp CLIENTUILEVEL = 3 MSICLIENTUSESEXTERNALUI = 1 CLIENTPROCESSID = 3776
MSI (s) (AC:64) [12:40:21:619]: PROPERTY CHANGE: adding PackageCode property. Its value is '{824AA89B-CCCC-4D40-A6D3-71DF21FEE110} '.
MSI (s) (AC:64) [12:40:21:619]: Product Code passed to Engine.Initialize: "
MSI (s) (AC:64) [12:40:21:619]: the Product Code of the table of properties before transformations: "{F89B22BC-2768-4237-B300-5CFA52D9AC84}".
MSI (s) (AC:64) [12:40:21:619]: the Product Code of the table of properties after transformations: "{F89B22BC-2768-4237-B300-5CFA52D9AC84}".
MSI (s) (AC:64) [12:40:21:619]: unregistered product: first start installation
MSI (s) (AC:64) [12:40:21:619]: product {F89B22BC-2768-4237-B300-5CFA52D9AC84} is not supported.
MSI (s) (AC:64) [12:40:21:619]: MSI_LUA: invites of credentials not required, the user is an administrator
MSI (s) (AC:64) [12:40:21:619]: PROPERTY CHANGE: adding ProductState property. Its value is '-1'. '.
MSI (s) (AC:64) [12:40:21:619]: entering CMsiConfigurationManager::SetLastUsedSource.
MSI (s) (AC:64) [12:40:21:634]: value 'SearchOrder' user policy is 'nmu '.
MSI (s) (AC:64) [12:40:21:634]: adding new sources is allowed.
MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding PackagecodeChanging property. Its value is '1 '.
MSI (s) (AC:64) [12:40:21:634]: Package name extracted from package path: 'SSO64.msi '.
MSI (s) (AC:64) [12:40:21:634]: package be registered: "SSO64.msi."
MSI (s) (AC:64) [12:40:21:634]: Note: 2 1: 2262: AdminProperties 3:-2147287038
MSI (s) (AC:64) [12:40:21:634]: Machine policy value 'DisableMsi' is 1
MSI (s) (AC:64) [12:40:21:634]: value of strategy Machine 'AlwaysInstallElevated' is 0
MSI (s) (AC:64) [12:40:21:634]: "AlwaysInstallElevated" user policy value is 0
MSI (s) (AC:64) [12:40:21:634]: product installation will be high because the user is admin, and the product is to be installed by computer.
MSI (s) (AC:64) [12:40:21:634]: the product '{F89B22BC-2768-4237-B300-5CFA52D9AC84}' is running with elevated privileges: product is affected.
MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding ADDLOCAL property. Its value is "froot, server, Admin, SSOMMC, Pwdsync.
MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding INSTALLDIR property. Its value is "C:\Program Files\Common Files\Enterprise Single sign-dans\ '."
MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding CURRENTDIRECTORY property. Its value is 'C:\Users\acc\AppData\Local\EBZ28334.tmp '.
MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding CLIENTUILEVEL property. Its value is '3'.
MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding MSICLIENTUSESEXTERNALUI property. Its value is '1 '.
MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding CLIENTPROCESSID property. Its value is "3776".
MSI (s) (AC:64) [12:40:21:634]: value of strategy Machine 'DisableAutomaticApplicationShutdown' is 0
MSI (s) (AC:64) [12:40:21:634]: MANAGER of REBOOT: disabled by the property MSIRESTARTMANAGERCONTROL. Windows Installer uses the built-in functionality of FilesInUse.
MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding MsiSystemRebootPending property. Its value is '1 '.
MSI (s) (AC:64) [12:40:21:634]: TRANSFORMS property is now:
MSI (s) (AC:64) [12:40:21:634]: PROPERTY CHANGE: adding VersionDatabase property. Its value is "200".
MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming
MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\Favorites
MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming\Microsoft\Windows\Network shortcuts
MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\Documents
MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming\Microsoft\Windows\Printer shortcuts
MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming\Microsoft\Windows\Recent
MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming\Microsoft\Windows\SendTo
MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming\Microsoft\Windows\Templates
MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\ProgramData
MSI (s) (AC:64) [12:40:21:634]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Local
MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\Users\acc\Pictures
MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative of Directors
MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start start\program
MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu
MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\Users\Public\Desktop
MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: Menu\Programs\Administrative C:\Users\acc\AppData\Roaming\Microsoft\Windows\Start of Directors
MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup
MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\Users\acc\AppData\Roaming\Microsoft\Windows\Start start\program
MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: Menu C:\Users\acc\AppData\Roaming\Microsoft\Windows\Start
MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\Users\acc\Desktop
MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Templates
MSI (s) (AC:64) [12:40:21:650]: SHELL32::SHGetFolderPath returned: C:\Windows\Fonts
MSI (s) (AC:64) [12:40:21:650]: Note: 1: 2898 2: MS without Serif 3: MS without Serif 4: 0 05:16
MSI (s) (AC:64) [12:40:21:650]: MSI_LUA: the MsiRunningElevated of the parameter property to 1 because the installation is already running high.
MSI (s) (AC:64) [12:40:21:650]: PROPERTY CHANGE: adding MsiRunningElevated property. Its value is '1 '.
MSI (s) (AC:64) [12:40:21:650]: PROPERTY CHANGE: adding privileged property. Its value is '1 '.
MSI (s) (AC:64) [12:40:21:650]: Note: 1: 1402 2: HKEY_CURRENT_USER Software Microsoft MS Setup (ACME) \User Info 3:2
MSI (s) (AC:64) [12:40:21:650]: PROPERTY CHANGE: adding USERNAME property. Its value is 'KPN '.
MSI (s) (AC:64) [12:40:21:650]: Note: 1: 1402 2: HKEY_CURRENT_USER Software Microsoft MS Setup (ACME) \User Info 3:2
MSI (s) (AC:64) [12:40:21:650]: PROPERTY CHANGE: adding COMPANYNAME property. Its value is 'KPN '.
MSI (s) (AC:64) [12:40:21:650]: PROPERTY CHANGE: adding a DATABASE property. Its value is 'C:\Windows\Installer\1ebf5f91.msi '.
MSI (s) (AC:64) [12:40:21:650]: PROPERTY CHANGE: adding OriginalDatabase property. Its value is "SSO x64\SSO64\SSO64.msi...............................
................................
Property (S): GPTSupport = 1
Property (S): OLEAdvtSupport = 1
Property (S): ShellAdvtSupport = 1
Property (S): MsiAMD64 = 6
Property (S): Msix64 = 6
Property (S): Intel = 6
Property (S): PhysicalMemory = 3840
Property (S): VirtualMemory = 4312
Property (S): AdminUser = 1
Property (S): MsiTrueAdminUser = 1
Property (S): LogonUser = acc
Property (S): UserSID = S-1-5-21-1305377269-4159824490-449157577-297538
Property (S): UserLanguageID = 1033
Property (S): ComputerName = W1613
Property (S): SystemLanguageID = 1033
Property (S): ScreenX = 1024
Property (S): ScreenY = 768
Property (S): CaptionHeight = 19
Property (S): BorderTop = 1
Property (S): BorderSide = 1
Property (S): TextHeight = 16
Property (S): TextInternalLeading = 3
Property (S): ColorBits = 32
Property (S): TTCSupport = 1
Property (S): Time = 12:40:37
Property (S): Date = 01/03/2012
Property (S): MsiNetAssemblySupport = 2.0.50727.4927
Property (S): MsiWin32AssemblySupport = 6.1.7600.16385
Property (S): RedirectedDllSupport = 2
Property (S): MsiRunningElevated = 1
Property (S): The privilege = 1
Property (S): Name of USER = KPN
Property (S): COMPANYNAME = KPN
Property (S): basis of DATA = C:\Windows\Installer\1ebf5f91.msi
Property (S): OriginalDatabase = SSO x64\SSO64\SSO64.msi
Property (S): UILevel = 2
Property (S): MsiUISourceResOnly = 1
Property (S): Preselected = 1
Property (S): ACTION = INSTALL
Property (S): AccountAuthenticatedUsers = authenticated users
Property (S): AccountCreatorOwner = CREATOR OWNER
Property (S): AccountPowerUsers = power users
Property (S): AccountUsers = Users
Property (S): ROOTDRIVE = D:\
Property (S): CostingComplete = 1
Property (S): OutOfDiskSpace = 0
Property (S): OutOfNoRbDiskSpace = 0
Property (S): PrimaryVolumeSpaceAvailable = 0
Property (S): PrimaryVolumeSpaceRequired = 0
Property (S): PrimaryVolumeSpaceRemaining = 0
Property (S): INSTALLLEVEL = 1
Property (S): Complus_XML_Data =Property (S): SOURCEDIR = SSO x64\SSO64\
Property (S): SourcedirProduct = {F89B22BC-2768-4237-B300-5CFA52D9AC84}
Property (S): ProductToBeRegistered = 1
MSI (s) (AC:64) [12:40:37:260]: Note: 1: 1708
MSI (s) (AC:64) [12:40:37:260]: product: Microsoft Enterprise Single Sign-On - the Installation operation failed.MSI (s) (AC:64) [12:40:37:275]: Windows Installer installed the product. Product name: Microsoft Enterprise Single Sign-On. Product version: 6.0.0245.0. Product language: 1033. Manufacturer: Microsoft Corporation. Installation success or error status: 1603.
MSI (s) (AC:64) [12:40:37:275]: see clean files/packages, if there
MSI (s) (AC:64) [12:40:37:275]: MainEngineThread returned 1603
MSI (s) (C AC:3) [12:40:37:275]: sequence number number for this installation system restore.
= Logging stopped: 01/03/2012 12:40:37 =.
MSI (s) (C AC:3) [12:40:37:275]: strategy user 'DisableRollback' is 0
MSI (s) (C AC:3) [12:40:37:275]: policy value 'DisableRollback' Machine is 0
MSI (s) (C AC:3) [12:40:37:275]: meter is incremented to disable the stop. Counter after increment: 0
MSI (s) (C AC:3) [12:40:37:275]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3:2
MSI (s) (C AC:3) [12:40:37:275]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3:2
MSI (s) (C AC:3) [12:40:37:275]: disable the stop against the decrement. If counter > = 0, will be denied the stop. Counter after decrement:-1
MSI (s) (C AC:3) [12:40:37:275]: restoration of the environment variables
MSI (s) (C AC:3) [12:40:37:275]: object to destroy RemoteAPI.
MSI (s) (C AC:3) [12:40:37:275]: end of thread Custom Action Manager.
MSI (c) (C0:58) [12:40:37:275]: disable the stop against the decrement. If counter > = 0, will be denied the stop. Counter after decrement:-1
MSI (c) (C0:58) [12:40:37:275]: MainEngineThread returned 1603
= Recording stopped: 01/03/2012 12:40:37 =.Hello Philippe Gupta.
Since the question you posted is on a Windows Server 2008-based computer, the question would be better suited on the TechNet support forum. Then I suggest you to post the question on the following link.
-
an error occurred resetting on usb drive
my friend did a reset on my USB disk because I forgot my administrator password, but it says that an error occurred while the wizard or some help please I want to play my games
No, you can not make a record of reset on the guest account.
Follow the advice given and reinstall Vista on your computer.
"If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to log on Windows and you need to reinstall Windows. »
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
All DATA are lost when you do this:
There are several methods to reinstall Vista.
There is no Windows Vista downloads available from Microsoft.
You can contact your computer manufacturer and ask them to send you a set of recovery disks.
They should do this for a small fee.
To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:
You need to change the Boot order to make the DVD/CD drive 1st in the boot order:
How to change the Boot order in BIOS:
http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm
"How to replace Microsoft software or hardware, order service packs and replace product manuals.
http://support.Microsoft.com/kb/326246
And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.
The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)
Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.
Ask them to the proper key sequence.
And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.
Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.
If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.
Some manufacturers have more available Vista recovery disks.
If this happens, you may need to try this instead:
You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.
Other manufacturers recovery DVDs are should not be used for this purpose.
And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs
Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:
"How to do a clean install and configure with a full Version of Vista '
http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html
And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.
And phone Activation may be necessary when you use the above installation method.
"How to activate Vista normally and by Activation of the phone '
http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html
See you soon.
-
Whenever I try to update my iPhone 6 for the ios10 it is said it is impossible and that an error occurred during the installation? I ' have enough free space, so I'm not real why he keeps now.
Try to update via iTunes.
See you soon,.
GB
-
"The iPod could not be restored. An unknown error occurred (1433). »
During an attempted - unsuccessfully - to restore an iPod Classic 160 GB end 2009 (model number A1238, 2173 EMC) model to its factory settings, I repeatedly met the following error message:
"The '< name >' iPod could not be restored. An unknown error occurred (1433). »
What can I do to fix this?
Do the following If you find an error in the 1400 range when you restore or update iPod in iTunes - Apple Support
-
An error occurred loading this content
Some have purchased these last series tv so give me error... "year error occurred loading this content" and yet my purchased movies play I tried all day and restarted several times and tried which networks etc. also tried two different apple TV even question. Any ideas?
Communicate with iTunes
-
An error occurred during the update the firmware.
Hello, I have an orange light flashes on my Airport Extreme device indicating that a firmware update is available. However when I tried to update I had the following error every time: "year error occurred while updated the firmware-6, 721. What should I do?
Thank you in advance for your help! ... soon a
If this is not the case, already, connect your iMac to AirPort Extreme with an Ethernet cable. On the iMac, make sure that Ethernet is enabled and disabled WiFi (or next to). Then try to use the utility AirPort again try the update of the firmware.
-
Dear I have a problem in my FaceTime for the e-mail address, of FaceTime also work on cell phone, when I insert my apple for FaceTime ID then show these words (and n error occurred during results. (Try again). Please help me and tell me what is a problem. Thank you
< re-titled by host >
See if it might help - If you get an error when you try to activate FaceTime - Apple Support or iMessage
-
I said that there is an update of the firmware available for my 3 t time capsule. I get the message "an error occurred when downloading". How to find the problem? I have elcapitan 10.11.6 and capsule version 7.7.3
Try temporarily, connect your MacBook Pro to your Time Capsule using an Ethernet connection... If not already, then try downloading the firmware again.
-
I submitted my podcast feed to iTunes Connect three times. It shows the same error: the podcast is not included in the iTunes Store podcast directory. An error occurred trying to play an episode of the podcast.
I can't find anything wrong with my workflow. It is validated. I subscribed it to iTunes as Apple suggested in the email. It works as well in iTunes.
Some argue, there should be at least three ready episode in animal feed. I only have three. What is the problem? Can someone help me? Thank you!
It comes to my diet:
I checked the power supply in Podcasts connect and validated it and says "ready for submission. It validates in CastFeedValidator;
However when you subscribe to iTunes the main episodes in animal feed, E000 (i.e. only Apple controls) downloaded only to half way and then stopped - although on the subscription again, it worked OK. These strange kinds of glitches happen sometimes, and maybe that's what caused the problem. I should try to submit it again and see what happens. (You do not have to have three episodes in the power - one is enough).
-
MacBook: An error occurred during activation. Try again
HI, I use MBP and this problem has been persistent for more than 5 months now.
I'm on El Capitan version 10.11.6. I get the message "an error occurred during activation, try again" when I try to Sign In.
My Internet speed is ok, ok account password. Already connected to iCloud and App Store with the same password. IMessage + Facetime, I am not able to connect.
Help, please. Thank you
Using two-step verification or two-factor authentication? If so, you need passwords for specific app for FaceTime and Messages.
Passwords using specific app - Apple Support
If this is not the case, see this article. It is written for iOS, but if you translate the suggestions in other similar to OS X, it should solve your problem.
If you get an error when you try to activate FaceTime - Apple Support or iMessage
-
An error occurred when to partition the drive
I have a MBP 2012 retina end 13 "El Capitan 10.11.6
The hard drive in the machine is swapped with Transcend SSD of retinaTRIM is not enabled.
I'm trying to install 10 Windows using Boot Camp, and I get this error.
An error occurred when to partition the drive
Your drive cannot be partitioned.
I've tried-
- reset the PRAM,
- First aid running in the desktop utility and
- running/sbin/fsck - AF in single user Mode.
Nothing has worked.
Any help is greatly appreciated.
Maybe you have not enough contiguous free space to create the partition.
-
Hello
Recently, I asked a says:
"I click on a YouTube video, an error message shows on the screen saying:" year error occurred, please try again later. " «More» with a black background. I'm sure that all of you guys have experienced at least once. However, this phenomenon occurs whenever I click on a video. I deleted my cookies, updated my Adobe flash player, activated JavaScript and Firefox update. But they don't solve my problems. Help me please! »
Someone answered my question, saying I should turn off my adobe Accelerator, what I've done. However, youtube videos do not always load and the error message continues to flow upward. I am really frustrated. I've tried everything. Please help me.
Yes, I tried all of these steps as you told me last night. It didn't work last night, but it is somehow working today. Thank you. I will contact you again if something happens.
Thank you!
Maybe you are looking for
-
Cannot install Windows 8.1 early 2015 MacBook Pro 64-bit
I try to install Windows 8.1 64 bit on a Macbook Pro running under Bootcamp early 2015. Operating system is 10.11.5 (El Capitan) and Bootcamp 6.0.1. I made a disk image of 8.1 to WIN with a suffix .iso on a 32 GB external drive. I followed instructio
-
How can I change the IP address for the Officejet 5610 to 192.168.1.1 to 192.168.7.1? Thank you BRU
-
I have a mac 2009 i (late), I want again to install snow leopard (I have the disc), but my driver disk is broken! So I want to ask if there is a way to create a disk image of my windows pc to use it through the hard drive of my imac Lord?
-
Mystery needs Solution! Drive hard dv6258se
Hello I recently got an error #1-07 on my test diagnostic message and decided to replace my hardrive. I checked the specs for my box and ordered a SSD drive suitable to replace the original disc. Or at least I thought it was the original drive. Th
-
1 channel number not valid in the 'ChnIntegrate(1,"THSP0000AVYP","THORAX_ANGLE")' command in the line call chnintegrate(1,KANALNAMEIST1_,"THORAX_ANGLE"). 2.ch (0): invalid index vector or matrix in the line call formulacalc ("ch ('head'): = ch (NOC (