10G between adpater and blades for VIC1240 + 1280

Similar Questions

• Difference between DAQ and DAQmx for acquisition of data PCI 6534

  Hello

  I use the PCI DAQ 6534 card for my digital I/o transfer. I am beginner in the labview.

  I want to store the data coming in memory and the reading of the data at the level of the trigger.

  I have seen the examples in the labview. Some have used DAQmx and DAQmx read write that screws and some have used the confg DIO port and all...

  So I want to know the difference between these two. For my application that I use?

  Hey Bo,

  First of all, I would recommend that you discover the NI 6533/6534 for NOR-DAQmx help. You may be able to find some of your answers in this help document. Now for what you try to do in your application, it looks like you are only buying data. If this is the case, with the 6534, the device acquires data in memory shipped as soon as the DAQmx series start task VI, as long as you don't start hardware triggers have in place. If you have a trigger of starting material, then will make the purchase of the aircraft after the DAQmx start task VI and only after you receive this material trigger. If you call not the DAQmx Read VI, then the data will be stored in the memory board for you, as the driver manages this data in the on-board memory storage, until reading DAQmx VI is called, which at that time, data is transferred to the Board of Directors in the memory of the computer. Once you get it in the computer's memory, you can do whatever you want with these data, as this graph or treat. If you look at the sample programs (which have been mentioned on how to find those in a previous post), you can find an example that little shows you how it works. One of the examples that you can check is called reading Dig Port-Ext Clk.VI. In this example, it sets up to read a finite number of samples and then starts the task. If you set a breakpoint on the line of the error after the VI begin, the data will be acquired in the amount of on-board memory. Then when you cancel the break of the VI, data will be extracted from the amount memory embedded in the memory system with the reading VI DAQmx. Again, the pilot takes care to put the data in the memory board for you once you start the task.

  I hope this helps. Please let us know if you have any questions or concerns about this issue. Also, certainly, discover and try to run all the programs related to the 6534 examples so that you can learn how the equipment works and how to use features to do what you want your program to do. Also, be sure to read through the help on the 6534, as well as the help of VI documentation to learn what makes each function. Thank you and have a nice day.

  Kind regards

  DJ L.

• Difference between viWrite and imgSessionSerialWrite for MSVC

  You are using MSVC ++, I read that you can access the serial ports on the card using imgSessionSerialWrite imgSessionSerialRead located in the niimaq.h. But they are without papers and unsported. VISA of NOR has also viWrite and viRead including alsos for communication series through the Commission. NEITHER gives samples using viWrite in the VISA, but not for the imgSessionSerialWrite functions. Anyone know the difference between the use of one or the other?

  I use a PCI-1428, and I'll try to move this message once I have validated that line of email support OR:

  Unfortunately, you will not be able to use the VISA controls to communicate with your camera via the Camera Link connection. The framegrabber does not have a serial port that can be targeted in the traditional sense of the term and can therefore be used by VISA or any other typical programs like HyperTerminal.

  In addition, people can try to use the generic series commands in the standard Camera Link,

  http://www.vision1.com/pdf/CameraLink5.pdf.

  So I guess I have will attempt to use the low level imgSessionSerialWrite functions to control the camera.

• What is the difference between redundancy and recovery for retention window?

  Hi all
  
  I'm still trying to get a grip on this concept of planning RMAN backup.
  
  I recently came across a situation like this.
  
  I have backups on a redundancy of 1.
  
  I have instance1, who had a job of GRID to run backups RMAN as follows
  
  Database incremental level = 0 a week at sea at 02:30
  I have backups daily, incremental level = 1 every night
  I have backups of the log of the archives through the day.
  
  What happened, was apparently on a TUE some time, the development team remove data in almost all of the tables in the schema.
  The this didn't discover until noon or so on Wednesday.
  
  I went to try to restore... and RMAN could not do. I had found a SNA for early TUES, they did... but I got the following error:
  
  RMAN > RUN
  2 > {}
  3 > SET up to this THAT SNA 4590383198282.
  4 > RESTORE database;
  5 > RECOVER DATABASE;
  {6 >}
  
  executing command: SET until clause
  
  From restoration to the 28 April 10
  allocated channel: ORA_SBT_TAPE_1
  channel ORA_SBT_TAPE_1: SID = 639 device type = SBT_TAPE
  channel ORA_SBT_TAPE_1: NMO v4.5.0.0
  allocated channel: ORA_DISK_1
  channel ORA_DISK_1: SID = 638 type device = DISK
  
  File number of the data file = 1 name=+DATADG/instance1/datafile/system.284.697137287
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of the command restore at 2010-04-28 15:53
  ORA-01180: cannot create the data file 1
  ORA-01110: data file 1: '+ DATADG/instance1/datafile/system.284.697137287 '.
  
  What I did... of research, it seems that since I don't have a level 0 incremental of before, he could not reset the database in time. Precedent has been removed since, I guess I had a redundancy of 1.
  
  So, I thought that I had a week of backup they way I put it... but that assumes that the errors are found fairly quickly before the next level = 0 backup.
  
  I want at least 1 to 1.5 weeks of worth of backups. I have the problem that we do have many tapes in rotation, so I can't go because too long..may 2 x weeks at the top.
  
  I'm revising my strategy, but I am confused that I read about the difference between retention RMAN setting with window of recovery / redundancy.
  
  Can someone give me an explanation how do you understand? I read on the web and in books to oracle, and for some reason, it is not clear to me what is the best way to go... especially when I see this window of redundancy and recovery can affect?
  
  Thank you in advance,
  
  Cayenne

  Redundancy = 1 means rman will mark any more old than the backup of the last full or incremental backup of level 0 as obsolete. So it is very likely that the backup that you need for this restore has been removed after work Wednesday morning.

  The recovery window will tell rman to keep (or not obsolete brand) all necessary backups to restore to any point in time in the recovery window.

  Bjoern

• What is the difference between "stop" and "suspend" for the deployment of the procedure?

  
  I'm running corrective plans and want to be able to suspend the proceedings and resume later.  I "stop" or "suspend"?

  Yes - the docs is misleading, I'll file a bug with the doc on this one here.  Stop cannot be resumed. Only suspend.  Thanks for the comments.

• What is the difference between education and reduction for existing customers

  I am a student so existing a customer. the price would be the same for me with the new promotion. What would be a better route to register as? with the delivery of existing customer, I know that the price will go up after a year. What happens in the educational version after a year? are there other differences that I should know about?

  Hi Mrtunes,

  I see no significant difference.

  Here is a screenshot of terms billing to register for the course educational (US store)

  (click to see larger)

  

  -Dave

• Difference between 'Form' and 'object '.

  I am writing today a guide in my native language and want to understand the difference between 'Object' and 'Form' for Illustrator. We have menu object in the Panel and can find a few options of forms under this menu.

  Also we program this object is:

  In computing, an object can be a variable, a data structure, a function or a methodand as such, is a location in memory value and possibly referenced by an identifier.

  In class-based object-oriented programming paradigm, 'object' refers to an instance of a class where the object can be a combination of data structures, functions, and variables.

  Relational database management, an object can be a table or column or an association between data and entity of database (such as the age of a person concerning a particular person). ^[1]

  So my question is: If we create a form in artificial intelligence can we call it 'object' and vs. ?

  There is menu item "Create object mosaic" option which works only with raster images. This is why any other object in artificial intelligence is not object?

  Thank you

  "In illustrator is an 'Application based on the objects' any item placed in the drawing area that you can select is called" object "where as".

  a form is an object of two dimension.

  We could say : each form is an object , BUT not every object is a form.

• difference between VR and Veeam

  Hi all

  Hello

  What is the difference between vr and veeam for synchronization? Just for machine replica and sync?

  When you retrieve the VM will retrieve the most recent replica (no GAP) and 24 stands will appear as snapshots in the Snapshot Manager.

  

  Then you would choose the snapshot you want to come back, select it and 'come back' and delete any copies remaining.

• Parachute does not not between iOS and Mac devices... Does anyone have a good solution for it nor a lot of garbage to support

  Parachute does not not between iOS and Mac devices... Does anyone have a good solution for it nor a lot of garbage to support

  You want the solution? Why not tell us what Mac and Apple, mobile devices you have the OS and version?

  Also what troubleshooting steps you took?

  We do not have a crystal ball, and we're not sitting next to you.

• DMA between host and target FPGA is not supported for this remote system.

  I try to cover with my FPGA (on the cRIO-9002) of the RTO.  I have install upward of anOpen good VI reference without error, but as soon I try to access thefifo I error-63001 and the attached message wrote:

  Error-63001 occurredat reference FPGA VI opened in the target - multi rate - variables - fileIO_old.vi

  Possible reasons:

  NOR-RIO FPGACommunications framework: (Hex 0xFFFF09E7) DMA from the host to the FPGA targetis not supported for this remote system. Another method for controller of e/s or climatiqueLes associated with the FPGA target.

  What other I/O optionsdo I need to move the data asynchronously to the RTO for the FPGA. I have triedcreating memory, but it seems that I can't write to the memory of the RTOSside.

  We have also a 9012sitting around will using this cRIO rather solve this problem.

  I'm very very greenwhen it comes to LabView, so I apologize if this is an easy question.

  As stated in the readme of the driver NOR-RIO, DMA is not taken in charge from the host to the FPGA on the cRIO-900 x series. The cRIO-901 x supports DMA transfers between host and FPGA and FPGA to host all the cRIO-900 x series controllers only support transfers the FPGA host DMA. As a result, LabVIEW returns an error if you try to transfer using DMA controller for cRIO-900 x.

  The 9012 looks like the ideal solution, you are very lucky to have additional hardware laying around

• It takes up to 4 minutes for the player switch between library and Rip, and vice versa.

  I run Media Player 11 on my XP machine with spare 120G on the C: memory and 3G - recently, it takes up to 4 minutes for the player switch between library and Rip, and vice versa. I have re-installed twice but no change. No new software has been installed before this time.

  Hello Absno69,

  Thank you for your message.  You mentioned that there were no new software installed before that happens.  Were there any hardware changes or updates?  If this isn't the case, we will perform a system restore to a point that you know that your system is working effectively.  Click HERE for the system restore instructions.
  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Firefox is responsible for the liaison between eBay and Paypal failure?

  It's the third time recently that the link between eBay and Paypal failed. On each point, I tried to buy it, the "Pay now" button is, I click on it... and I'm 'time Out' ed. Over and over again. No matter if I click on the page of the article, MY EBay or "purchase history". The previous two points got finally adjusted and eBay implied that sellers had forgotten to complete a sequence to an end, I don't think. I have no trouble paying with Paypal on other sites and there is money in the account that you use to pay for. On the pages of 'Time Out' going up, it is suggested that Firefox may be responsible for somehow, so in desperation to this third moment of the break, I thought I'd ask, if I can hardly believe that it has nothing to do with you. If you can help, please do?

  Hi, just a guess here, but try to disable McAfee WebAdvisor in your extensions (Ctrl + Shift + A).

  If it is not, remove any reference to eBay and Paypal, as described under the heading "How to remove a single website to my story?" in this article - delete navigation, search and download history on Firefox, then try again (not related to an old favorite). Note: It may take a few minutes to complete the removal.

  If your question is resolved by this or another answer, please take a minute to let us know. Thank you!

• Strategy for sharing media between Mac and Windows Premiere Pro

  I hope that I write in the right forum, it's here or in the hardware forum.

  I'll take the plunge and get a pretty high-end PC to increase my aging Mac Pro for Premiere Pro CS 5.5 (and probably 6 CS as soon as the kinks are developed). Right now my online media resides on several trendy readers fast eSATA RAID 5, on my Mac Pro through some eSATA PCI cards. It works well and I have pretty good bandwidth of 200MBS to 250MBS using this method, I think enough speed for the type of media that I use in my changes, a combination of XDCAM EX, AVCHD, H.264 Canon with maybe 4-5 rivers both in Multicam edits.

  Adding from my PC to the combination will complicate things. I want to be able to access the media on my eSATA drives, which are currently formatted for Mac, using filesystem HFS +. I heard that the Mac drive can make Windows well read this file system.

  The issue is sharing this media on drives fast enough for both systems be able to modify / access simultaneously. I do not have Gigabit ethernet, but I don't think it would be pretty quickly, I think that practically it tops on about 70 MB/second. I probably need more speed.

  Also the Mac can share than the SMB protocol, but does not seem to the current Mac OS 10.7 sharing SMB very well but I test it with Windows. I know for my various boxes of media player, it does not work very well, or at any time to access my Mac 10.7 system via SMB. In addition, SMB seems to be a very slow network protocol. I can share via AFP or NFS, and I think that NFS is the speed you need, do not know if Windows out of the box can cope with this Protocol.

  I know there is such a thing as "fiber channel" and other mainly tech to create a fast network, the Mac can also network via Firewire, but I don't think it will be enough or fast. I guess I could see if it was faster than Gigabit ethernet protocol using Cat 6 or what is the last type of ethernet cable. I am doing a shortcut here and see if the large number of people did and what they think works best.

  Thanks for all the tips here.

  Kind regards

  -Keith

  I guess there are a lot of variables, but change us on a network using the SMB and Gigabit Ethernet and working with fairly similar media (XDCAM HD 422, XDCAM EX, AVCHD or H264) and it works fine. We have two servers sharing between 3 and 4 editing suites. I think that if you are just sharing between two machines, it should be sufficient.

• What is the main differences between version 6.5 and 11 for essabes?

  Hi all
  
  Can someone list me the differences between the version 6.4 essabase and 11 for essabe?
  
  Thank you
  Hari

  ASO

  If you want differences, have a presentation tool that will tell you the difference of 9.3 from:-https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&id=1092114.1
  If not check the documentation for the new feature Articles:-https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&id=1092114.1

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• difference between Quisced and Suspended database (10g)

  is someone can you please tell me what what is the difference between suspended and suspended database

  check this http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/start.htm

  everything was mentioned anout quised and suspend database sessions.