11.2 OWB table of reimportation and loading automatic suspicion active

Similar Questions

• Save and load the string table

  Hello

  is possible except an array of channel with multiple line of text file and load new file to table with the same size of array?

  Because when I use the code in the picture, initialized array is 3 x 3 but after save and load file is table 5 x 3.

  

  If is an option how to save this table in the file into 3 x 3 table and charge back of file as a 3 x 3 table?

  Thank your for any suggestion,.

  Petr

  Your code is loaded in 5 x 3 is because two of your cells have newline characters (\n). The reading of the worksheet VI use return or line break characters and your delimiter to figure out how to split the string into an array.

  A solution might be to replace all characters from end of line with something else, and then reinsert it after reading of the worksheet.

  It can do what you want, even if it's a bit bulky. It's a little confusing if you don't understand "------" string formatting, but it essntially replaces all '\r' and '\n' with '\\r' and '\\n', including the conversion of the worksheet does not read as an end of line character.

  

• Read data from the Table and load it into the csv file

  Hello

  I would like to read a table (select * from employees) and load the data into a csv file.

  What methods are available?

  Records will be at high volume.

  Thank you

  If it is to do a lot, use APEX.

  Create a new page with an interactive report based on the SQL code you want. When you go to download Excel, it is actually a CSV file.

  If it is large, you may need to go on the FILE_UTL road.

  If it is only once, use an interface such as SQL tool * or SQL * Developer.

  If it's a learning experience, you must do all three.

  MK

• Index rebuild required after truncate the table and load data

  Hello
  
  
  I have a situation that we truncate tables bit and then we loaded data [only content] on these tables. What you need to rebuild the index online is necessary or not?
  
  
  And another question is if we drop a few clues is the total amount of space is released or not. And re-create indexes will use the same amount of space. As I don't have disk space more? In this situation, rebuild the index online will be a better idea...
  
  Can you please on this...
  
  
  truncate the table some the few loading tables + reconstruction markings online is the best (or) droping little tables, a few tables loading + re-create the index is better
  
  Can you suggest the best way... We have a time that it currently we don't have enough space on the disk... [Option should not effect the space]

  user13095767 wrote:
  Ok. I have it...

  u want to say if we disbale the index while loading... Next, we need to spend the time to build.

  If the indexes are enabled, then rebuild again is not necessary after loading tables...

  Please answer if my understanding is correct...

  above is correct

  >

  If so, how abt the differences in the space occupied by the spaces of storage during the index rebuild and re-create... T he acquires more space if recreate us [deletion and creation] or rebuild online is preferable to an index...?

  space used is the same for all options.

• Data are skewed between saving and loading

  Hello

  I'll have a problem saving and loading the data in my VI. My software allows the user collect data from an acquisition of data which is then displayed on a graph for them to see. They can save the data, then load it back later to compare with the current data. Here is the basic methodology:

  1. the data are read in the program via a data acquisition

  2. data are saved in a file in spreadsheet to a table with the VI 'save in the spreadsheet file.

  3. the data is loaded to the program with the VI "read the spreadsheet file.

  4. the data are transferred in the same graph is was originally shown on

  However, when I save the data and reload, my chart is slightly distorted. I noticed a few things:

  1. the values of X are a little more for the loaded data vs the same data front to save/load (DECIMAL NUMBERS)

  2. the values of are are not affected. (WHOLE NUMBERS)

  3. the loaded data are more straight lines, which means that the same data point is used for row X or Y values

  attached is a screenshot of the graph - red data is from this session, Green data is loaded.

  export excel to this same graph is attached.

  No one noticed an interesting trend in this anomaly, or have any ideas on what I can check? My code does not change the values, but only manipulates them. Please let me know if you need more information, I've tried including as much as I could without a useless book.

  Thank you

  Joe

  To solve this kind of problem, replace the random number generators with a simple signal that you can easily identify as a linear ramp, the number of iterations or a low frequency sine wave. By selecting a signal that is suitable for your application, you should be able to tell if the data are all be recorded and in the right order.

  The use of nodes property to move data around sounds like a disaster in the making.  Examine the queues, user events, or functional global variables.

  Lynn

• Hello! can any1 pls let me know how to create a look up table in labview and use it in the vi.

  
  

  If the lookup table will always stay the same (for example, a character generator or something similar), you can put the values into a constant matrix 2D on your diagram, with the input as a column, the equivalent in the other value. When you need to search you use an array of index to return all values in the "input" column, search for it using 'search in table 1 d' and the index number that results allows you to index the data in the other column. If the values may change, so it is probably better to load a table control with your equivalent values from a file.

  S...

• The ADF Table data validation and highlighting

  I have an ADF table, supported by a VO. Gets the data loaded from a spreadsheet file. There are some required columns marked with the required attribute. the columns do not get highlighted when loaded data are empty. How can I get auto table validated during the loading of data and WITHOUT a commit / submit to the rear end table?

  My requirement is.

  1 load the data into the table.

  2. a way to highlight the rows or columns that have no values (how?) I tried the style inline for column as #{row.bindings.invamt == null?' background-color: Red;': ' background-color: White;'}, but no luck.

  3. validate data from db.

  User, tell us your version of jdev, please!

  If the table is editable, you can add this to the inputText of the column

  contentStyle = ' #{empty row.bindings.PhoneNumber.inputValue?» "{- color: red;':"} ".

  For the PhoneNumber column. If the table is read only the cellular connection is

  973564 wrote:

  I have an ADF table, supported by a VO. Gets the data loaded from a spreadsheet file. There are some required columns marked with the required attribute. the columns do not get highlighted when loaded data are empty. How can I get auto table validated during the loading of data and WITHOUT a commit / submit to the rear end table?

  My requirement is.

  1 load the data into the table.

  2. a way to highlight the rows or columns that have no values (how?) I tried the style inline for column as #{row.bindings.invamt == null?' background-color: Red;': ' background-color: White;'}, but no luck.

  3. validate data from db.

  contentStyle = ' #{blank line.» Phone number? "{- color: red;':"} ".

  So I guess that the connection you are using is not correct.

  

  Timo

• Create triggers in the table, sequence, insert and update with "model"?

  It must be of rtfm, trial and error thing but you wanted to ask, is it possible to have models or similar automation for the following scenario:

  1.), I add the table to the logic model

  2.) Using glossary I transform a relational model that was recovered / synchronized with the data dictionary

  3.) then I have the new table to add

  -but

  I would then have auto-DDL of to be synchronized to database:

  -create sequence for the id column

  -create table

  -create indexes for the id column pk

  -Create triggers for insert and update

  -l' idea is to have db_created_dt and db_modified_dt defined in the table, so that each table has them to the fields of record etc.

  -activate the triggers

  Each of them following the same naming convention.

  Similarity with approx. generator Apex workshop utils sql create table of the copy paste "excel" that creates 'id' - column + sequence and insert the trigger.

  rgrds Paavo

  Hi Paavo,

  most of the steps can be made in one or other way

  -create sequence for the id column

  -create table

  -create indexes for the id column pk

  If you want to start in the logic model and you don't want to have the ID column in the logic model and select 'Create the surrogate key' checkbox in the dialog entity - you will get an identity column in the relational model and the version of database and settings in ' preferences > Data Modeler > model > physics > Oracle "you can set the sequence generation and the trigger for taking in load.

  fields of record defined in the table, so that each table has them

  You can add the same set of columns in all tables with the transformation script 'model of Table... ».

  You can also look here Oracle SQL Developer Data Modeler 4.1 user - defined DDL generation using transformation scripts

  to see how to grant your DDL generation using the transformation script. DM comes with example to generate separate tables of logging and triggers. You can create your build script of triggers that support logging in these common columns.

  Philippe

• I'm trying to extract the strings and load them into a text-helpplease file

  I'm trying to extract the strings and load them into a file text without space between them - see below
  
  p_csa = ISCC M4 DP
  
  where p_csa is a tring to load into a text file
  
  
  
  Code:
  
  SELECT SUBSTR (p_csa, 0, 0) INTO v_telco FROM DUAL;
  SELECT SUBSTR (p_csa, 1, 4) INTO v_comp FROM DUAL;
  SELECT SUBSTR (p_csa, 5.3) INTO v_csa_prefix FROM DUAL;
  SELECT SUBSTR (p_csa, 8, 4) INTO v_csa_type FROM DUAL;
  
  fileidinvoice: = UTL_FILE. FOPEN (c_data_location, filenameinvoice, 'W');
  fileidlog: = UTL_FILE. FOPEN (c_data_location, filenamelog, 'W');
  
  UTL_FILE. PUT_LINE)
  fileidinvoice, v_telco | » '|| v_comp | "|" | v_csa_prefix: "| v_csa_type);
  
  
  -the content of the file-
  
  ISCC M4 DP
  
  =====================
  I want to remove the space between the chain above for the content of the file should look like this:
  
  -the content of the file-
  
  GCSIM4DP

  Hello

  976253 wrote:
  I'm trying to extract the strings and load them into a file text without space between them - see below

  p_csa = ISCC M4 DP

  where p_csa is a tring to load into a text file

  Code:

  SELECT SUBSTR (p_csa, 0, 0) INTO v_telco FROM DUAL;

  Is it always NULL?

  SELECT SUBSTR (p_csa, 1, 4) INTO v_comp FROM DUAL;

  You don't need the double table much in PL/SQL. You can simply say

  v_comp := SUBSTR (p_csa, 1, 4);
  

  Almost all integrated single-row functions work in PL/SQL. (NVL2 is the only one I know who does not work in PL/SQL).

  SELECT SUBSTR (p_csa, 5.3) INTO v_csa_prefix FROM DUAL;
  SELECT SUBSTR (p_csa, 8, 4) INTO v_csa_type FROM DUAL;

  fileidinvoice: = UTL_FILE. FOPEN (c_data_location, filenameinvoice, 'W');
  fileidlog: = UTL_FILE. FOPEN (c_data_location, filenamelog, 'W');

  UTL_FILE. PUT_LINE)
  fileidinvoice, v_telco | » '|| v_comp | "|" | v_csa_prefix: "| v_csa_type);

  What are you trying to do here? For example, what you're trying to put between c_comp and v_csa_prefix?

  -the content of the file-

  ISCC M4 DP

  =====================
  I want to remove the space between the chain above for the content of the file should look like this:

  -the content of the file-

  GCSIM4DP

  If you don't want space, then only concatenate all the spaces in the string before you write it and REPLACE allows you to delete all the spaces that have been copied from p_csa. For example:

  UTL_FILE.PUT_LINE ( fileidinvoice
              , REPLACE ( v_telco || v_comp
                                      || v_csa_prefix
                            || v_csa_type
                     , ' '
                     )
              );
  

  I guess you need the v_comp of separate variables, the v_csa_prefix and the v_csa_type for something.

  I hope that answers your question.
  If this isn't the case, after a complete script that people can run to recreate the problem and test their ideas. Display the results you want (in other words, the contents of the file created).
  Always say what version of Oracle you are using (for example, 11.2.0.3.0).
  See the FAQ forum {message identifier: = 9360002}

• Access to the file system for Extraction and load testing

  Hello
  
  I did a study with me the different techniques of Extraction and load using Oracle database as a source for the extractions and targets for loads.
  
  I would like to run the same tests on my test service to compare the run times.
  
  To do this, I need my schema to be able to write files and read them as external tables.
  
  I didn't need to download files, I can create using the UTL_FILE utility that comes with the Oracle database.
  
  My test service will include limited access to a directory read / write flat files?
  
  Thanks in advance,
  Stew of Ashton

  Stew,

  The cloud of Oracle does not support external tables, nor access to the OS files (utl_file etc.). Only, you have sftp and download access via Apex or SQL Developer to load or import data. Someday, there may be a place to store files in the cloud, but I don't know the details of this.

• Read data from table of $ E and insert in the staging table

  Hi all
  
  I'm new on ODI. I need your help to understand how to read data from a table ' E$ "and insert in an intermediate table.
  
  Scenario:
  
  The name of two columns, in a flat file, the employee and the employee id must be loaded into a data EMPstore +. A check constraint is added so that the data with the employee names in capital letters only to load in the data store. Check the command is set to the static movement . Right-click on the data store, select control , then check. The lines that have violated the check constraint are kept in E$ _EMP+ table.
  
  Problem:
  
  Problem is I want to read the data in the table E$ _EMP+ and transform in capital letters in the name of the employee and move the corrected data of E$ _EMP+ EMP+. Please advise me on how to automatically manage the 'soft' exceptions in ODI.
  
  Thank you

  If I understand, you want to change the columns in the tables of $ E and then load into the target.

  Now, if you notice how ODI recycles the error, there is an incremental update to the target using the E table $ after he filled the I$ table.

  I think you can do the same thing by creating an interface using the table of $ E as source and implement the business logic in this interface to fill the target.

• data and loading the script sale scheme

  Hello
  I'm learning OBIEE on mine. I managed to install oracle XE and OBIEE 10 g. I need a script to create a new db schema and load the dirty tables with sample data to create reports. can someone help me with scripts?

  Yes, I confirmed that only one Enterprise for Oracle Db edition has the SH schema enabled during installation... you can't have the SH schema without this feature which is ONLY on the Enterprise Edition.

  Here is the article: http://www.dba-oracle.com/t_callan_schema_bye_scott.htm

  Please install the full Enterprise edition and select the SEED DB on install. You will have the sh schema

  If it was OK, please mark as correct.

• WebHelp TOC does not display in Firefox and loads very slow in IE... advice?

  We have recently migrated to a webhelp online system so that we do not have to distribute documentation with our software.  We organize the webhelp documentation on our Web site and it's supposed to be accessible from our software.  Our problem is that the table of contents are loading very slowly in IE and does not at all seen Firefox.

  When I run the help locally (on our network or on my workstation), the table of contents works very well.

  During the last hour, I added the script to force the table of contents of synchronization (found on the site Web of Peter G)... and it did not help.

  Any advice on where to look?

  I can pm our URL for the help, if someone thinks it will help them to diagnose.

  Thank you!

  Jim

  (currently using Robohelp 8)

  No problem. Just load the page with the active Console tab. Then select the errors and you will not get the errors.

  Note: The table of contents are also very slow to load in Chrome. You have quite a few projects merged, so be sure that you set the correct speed optimization.

  The help of opening shows two errors in the Firebug console. I get a 404 on a missing file error: "" NetworkError: 404 not found - http://www.foodpro.com/help/release_2.4/webhelp/mergedProjects/FPUSRPRF/whxdata/whtoc.xml".

  The errors indicate that the merged projects 'checkfiles' and 'FPUSRPRF' are missing. I suspect that FF choke on the missing mergedProjects/FPUSRPRF/whxdata/whtoc.xml. Still, execution stops after that.

  But perhaps a merged help guru can tell you more.

  Take a bow

  Willam

• Since Apple ridiculously decided to abandon the center of games tab of my friends in the game does not load automatically and I have to go to GC and click the circle of friends so he could load, MORE I wonder constantly if I want to use my game stored loc

  Since Apple decided to abandon the center of games tab of my friends in the game does not load automatically and I have to go to GC icon and tap the circle of friends so he could load several times, MORE we continue to request if I want to use my game stored locally or my stored GC game. I refuse to install iOS 10, because it means of course I won't be able to manually load the tab my friends and my losing my game completely. How can I fix it? Remove the Center game is the worst thing that Apple could have done, in my humble OPINION.

  You will not lose your game entirely. I have several games of game Center, and they work fine. And I understand the developer of a game that this game center continues to store the backup of your game.

  It's just that now friending is handled via the interface of the game. The only options that you have in iOS10 is to go to the settings panel in / log out of game center or remove all friends. And none of the games I play has updated so I can see how their friending works with iOS10.

  Beyond providing the basic interface, Apple seems to have turned all aspects of the social game on the games themselves.

  If you want to make Apple know how you feel, you can leave your comments via this form

  http://www.Apple.com/feedback/

• Auto SMS sent from my iPhone 5 to this number SMS int ' l 447903553650 and loaded for free! No history of sms sent in my message box! How can I solve it?

  Auto SMS sent from my iPhone 5 to this number SMS int ' l 447903553650 and loaded for free! No history of sms sent in my message box! How can I solve it?

  Tap settings > Messages and then turn OFF send as SMS .