11 of ColdFusion on RHEL, all files in cfusion/bin are NOT executable.

Similar Questions

• Entering a project LV file in VSS, all files in the project are omitted. Only the shell project and settings are vs. No idea why?

  Entering a project LV file in VSS, all files in the project are omitted. Only the shell project and settings are vs. No idea why?

  Chuck72352,

  Hello! It's my understanding you need to add the files separately to Source Code control with the .lvproj file.

  This is a lot of information on Source Code in LabVIEW control practices.

• Windows 8 upgrade retains fault make sure all files required for installation are available, and restart the installation. Error code: 0x8007025D

  Hello

  Like so many others, I am fighting to get 8 upgraded windows. I have tried all the methods mentioned upgrade

  on the forums without success. I have greated iso dvd, tried to use the USB and the installation of office.

  Error: Windows cannot install required files. Make sure all files required for installation are available, and restart the installation. [Error code: 0x8007025D]

  The error logs:

  Setupact.txt

  2012-11-04 01:02:27, MoveOldOSFiles IBS Info [0x0600a6]: got through [C:\Windows\] to [C:\Windows.old\Windows\]
  2012-11-04 01:02:27, info [0x06412c] IBSLIB SetCheckpoint: Checkpoint ("WinPEArchiveOldWindowsFoldersDoneCheckpoint") current...
  2012-11-04 01:02:27, info [0x06412e] IBSLIB SetCheckpoint: Checkpoint 'WinPEArchiveOldWindowsFoldersDoneCheckpoint' have been correctly set up.
  2012-11-04 01:02:27, info [0x06412c] IBSLIB SetCheckpoint: Checkpoint ("WinPEImageApplyReadyCheckpoint") current...
  2012-11-04 01:02:28, info [0x06412e] IBSLIB SetCheckpoint: Checkpoint 'WinPEImageApplyReadyCheckpoint' have been correctly set up.
  2012-11-04 01:02:28, info [0x06009e] IBS DeployWIMImage:Calling IDepWIMImageResolved::Apply...
  2012-11-04 01:02:28, info [0x0606cc] IBS calling WIMApplyImage (flags = 0 x 180)...
  2012-11-04 01:08:36, ApplyWIMCallback IBS Info [0x0600ae]: a new attempt on the record [offset 0000000075fdfa0a, length 1526856] RULE is [605]
  2012-11-04 01:08:36, ApplyWIMCallback IBS Info [0x0600ae]: a new attempt on the record [offset 0000000075fdfa0a, length 1526856] RULE is [605]
  2012-11-04 01:08:37, IBS Info [0x0600ae] ApplyWIMCallback: a new attempt on the file [C:\Windows\WinSxS\amd64_nv_lh.inf_31bf3856ad364e35_6.2.9200.16384_none_473133365499807b\nvlddmkm.sys] RULE is [605]
  2012-11-04 01:08:41, IBS Info [0x0600ae] ApplyWIMCallback: a new attempt on the record [offset 0000000075fdfa0a, length 1526856] RULE is [605]
  2012-11-04 01:08:41, IBS Info [0x0600ae] ApplyWIMCallback: a new attempt on the record [offset 0000000075fdfa0a, length 1526856] RULE is [605]
  2012-11-04 01:08:41, IBS error [0x0600af] ApplyWIMCallback: error application C:\Windows\WinSxS\amd64_nv_lh.inf_31bf3856ad364e35_6.2.9200.16384_none_473133365499807b\nvlddmkm.sys. RULE [605] [gle = 0x0000025d]
  2012-11-04 01:08:41, error [0x0606cc] IBS WIMApplyImage failed; HR = 0x8007025D [gle = 0x0000025d]
  2012-11-04 01:08:42, error [0x0600a1] IBS DeployImage:Image request failed; HR = 0x8007025D [gle = 0x0000025d]
  2012-11-04 01:08:42, error [0 x 060082] IBS Callback_ImageTransfer: unable to set the OS image. HR = 0x8007025d [gle = 0x0000025d]
  2012-11-04 01:08:42, PublishCriticalError IBSLIB Info: publish error message critical [Windows cannot install required files. Make sure all files required for installation are available, and restart the installation. [Error code: 0x8007025D]
  2012-11-04 01:08:42, info [0x0a013d] UI accept Cancel. Leaving the Page's progress.
  2012-11-04 01:08:42, info UI entering Page Cancel.

  Setuperr.txt

  2012-11-04 01:08:41, IBS error [0x0600af] ApplyWIMCallback: error application C:\Windows\WinSxS\amd64_nv_lh.inf_31bf3856ad364e35_6.2.9200.16384_none_473133365499807b\nvlddmkm.sys. RULE [605] [gle = 0x0000025d]
  2012-11-04 01:08:41, error [0x0606cc] IBS WIMApplyImage failed; HR = 0x8007025D [gle = 0x0000025d]
  2012-11-04 01:08:42, error [0x0600a1] IBS DeployImage:Image request failed; HR = 0x8007025D [gle = 0x0000025d]
  2012-11-04 01:08:42, error [0 x 060082] IBS Callback_ImageTransfer: unable to set the OS image. HR = 0x8007025d [gle = 0x0000025d]

  Any help will be greatly appreciated.

  Thank you for all the answers. Finally managed to get installed it. Download 4 times. Whenever he stopped at different percentages, so I expected the download is corrupt. Finally in the format of my other readers, installed windows 7 on it and then downloaded windows 8. Finally, it worked. Had to be something with my player.

  Thanks again.

• When file/collection, how can I delete all the related items that are not on my last composition?

  Hello, I have a great difficulty using the file/collection a large file I did months ago, because when I use it, the file is created, but it takes 2.5 to space! compared to others of my works, taking almost 1 TB of files, this one is too big and I think by deleting some files, but I don't want to make a mistake, so I wanted to ask here, if it is possible to take a main composition and only do a file/collection of this composition, objects and elements that serve there (the last I made on my account at least, with the elements used on that, because I think that there are many (if not a large part of them) files and elements that are not used in the final version, as scenes of the version beta of my work, the problem is the composition is too long and have a lot of different archives or drop movies then it could take forever to do it manually...

  Thanks for reading me! I hope that this is a solution...

  It's a two-step process:

  1. reduce your project to the desired composition.

  2 recover your files.

• Installation of Windows Vista disc will not re - install. "files required for installation are not available" error 0x8007045D code

  My computer is slow, so I decided to format the C drive and re - install Vista with the installation disc. I did it once before and it worked. This time, however, I tried to install it and once he got to the 'Copy files' section and "Expanding files" error message came up saying: "Windows cannot install required files. Make sure all files required for installation are available, and restart the installation. Error code: 0x8007045D

  I tried to restart the computer, and restart the installation, but nothing does.

  I need your help please!

  It's an IO error.  Try to wipe the dvd with a soft cloth and then try again.  The drive itself may also need cleaning.

• Some or all of the requested samples are not yet acquired: API change responsible?

  My Delphi program, which works very well under NOR-DAQmx 8.9.0f4 on a set of material, fails under 9.0.0f2 on what I received insurance material is equivalent. The error is «some or all of the requested samples are not yet acquired...» ». This happens even to slow scanning rates, and coming to suspect that the API has changed subtly in the transition from version 8 to 9. What is the probability is it? Now that I have access to the source code on the new hardware (NI PXI-1044 with computer integrated PXI-8110) is there something I can do to check this?

  Hi Francis,.

  Your program still calls DAQmxCfgDigEdgeStartTrig() for all the tasks of the slave? If you do not do this, the devices are beginning to acquire data at the same time, and since you pass 0 for the timeout parameter to DAQmxReadBinaryI16(), out-of-sync devices could certainly time-out errors.

  In addition, you must ensure you start the slave devices before the master device, so that they're already waiting for a trigger at the start of the master device.

  Brad

• all rows in the table are not eligible for the specified partition

  SQL > Alter Table ABC
  Exchange 2 Partition P1 with Table XYZ;
  
  Modified table.
  
  SQL > Alter Table ABC
  Exchange 2 Partition P2 with Table XYZ;
  
  
  P2 Partition Exchange with XYZ Table
  *
  ERROR on line 2:
  ORA-14099: all rows in the table are not eligible for the specified partition
  
  The exchange partition works fine for the first time. However, if we try to swap the 2nd partition it gives the error.
  How to solve this error?
  How can I find the lines which are not qualified for a specific part. is there a query to find out the same thing?

  >
  Well, exchange of syntax and logic is not clearly as it should (IMHO). There is no element of syntax that tells Oracle we want to Exchange partition data in a table that is not partitioned or not partitioned into partition table data.
  >
  What? Not sure where you got that but maybe it was before you had first cup of coffee? ;)

  An "Exchange", it's just that; an Exchange. Partition data end up in the non-partitioned table and vice versa. It is meaningless and totally obsolete if "we want Exchange partition data in a table that is not partitioned or not partitioned into partition table data".
  >
  It was decided by Oracle not partitioned table control. If the non-partitioned table is empty, it means you want to Exchange data partition in a non-partitioned table. And if not partitioned table is not empty, it means you want to Exchange data in the table that is not partitioned into partition.
  >
  There is no decision to make. The segments are swapped. Oracle doesn't check, know or even care if one or the other or both segments are empty. 'Control' which is carried out (by default except if NO CONTROL is used) only consists of ensuring all the data in the segment intended for the partition belongs to this partition.

  It is what gives the example of John. This can NEVER work if table1 is empty unless p1 is empty at the beginning:
  1 Exchange p1 with table1
  2 Exchange p2 with table1

  As John explains, assuming that no other operations are trying to put the data from p1 P2 which is not possible if p1 actually contains data.

  You can save it for next April 1!

• How to say the script colse all files and save them, but not untitle docs

  Hello world

  I want colse open files and save them, but not the files that have never been saved.

  Try this script, but I ran after, all files are not saved.

  docs var = app.documents.
  for (var i = docs.length - 1; i > = 0; i--) {}
  if(App.activeDocument.Saved == false) {}
  docs [i]. Close (SaveOptions.no);
  }
  Another yew (docs [i] m:System.NET.Sockets.Socket.close (SaveOptions.YES));
  }

  can someone tell me what is the problem with the script?

  Thank you

  Respect of

  Teetan

  
  

  var docs = app.documents;
  for (var i = docs.length-1; i >= 0; i--) {
      if (docs[i].saved == false) {
          docs[i].close(SaveOptions.NO);
      }
      else {
          docs[i].close(SaveOptions.YES);
      }
  }
  

• I use Lightroom 5 and all my files are gone.  I have all the pictures, but they are not classified more.  How can I get them back in their cases?

  I downloaded the day before and everything was fine.  Open 5 Lightroom the next morning and all records have disappeared, spill of thousands of photos in "All photographs."  I also can not download for Lightroom more.  I get the message: the following files were not imported because they could not be read.  Thank you for your help.

  A copy of Θcran of exactly what your LR screen looks like might help.

  Do you still have the 'Files' header in the sidebar below featuring "all photographs"?

  What happens if you right-click on the photo and select "go to folder in the library.

  The error message on the new imports you report confusion often really means that LR cannot write where you tell him.

• My buttons at the top IE: history, tools, file, edit etc etc are not there. I have them hidden somehow? How can I get back them?

  My buttons at the top of my browser (ie: file, edit, history, tools, help) are not there. I have them hidden somehow? How can I get back them?

  Keyboard: Alt + V, T, M
  It should show you the menu bar.
  Does that help?

• Is it necessary to save all files hotfix after they are downloaded

  Also the same thing about updates of security also thanks

  Yes, you can remove the $NtUninstallKB... file and all related $NtServicePackUninstall$ folders and files, if you wish. Those who are for the most part uninstall service packs and Windows Update files. You need these files if you can always restore or uninstall a Service Pack or update.

  If you are going to keep a given patch or update, uninstall files serve no additional purpose. Just delete them as you would any other file or folder. (Note: Windows correctly will prevent the deletion of the any of these files that are still needed for one reason or another.)

  Patches will always appear in Add XP or Remove applet of the control panel of the programs. To delete the entries, open the program, check the updates to see him at the top of the window, made scroll to select Windows XP - software updates, each of them at a time, then click on remove. (Or just leave them there in case you find you want to bring some of them).

  You will get an error message telling you that the file has already been deleted. Click Yes and proceed to the next. Just be sure to not accidentally uninstall an update that you have already deleted it. If the software update Removal Wizard opens instead of the "already deleted" error message, click Cancel.

• CHKDSK is run over - all files on the disc are *.dsk - help?

  External hard drive: LaCie (500 GB)
  Operating system: Windows Vista (home edition)

  I store all my information on my external hard drive. One day after I restarted my computer Windows suggested I run CHKDSK on the external hard drive, so I let him do his thing.

  CHKDSK got to 60%, and then there was a power outage at my house. I understand that no matter what CHKDSK is unable to pick up where you left, so now when I load to the top of my external hard drive, all the files and folders that were once there are now gone, all that's left are six or seven files with extension *.dsk. How to recover all my files or let CHKDSK finish?

  I know that once you reformat a computer shops who can always there all the information the back before the format, so I know that there is a way to solve this problem / recover my files, however, I'm not so smart that.

  Help, please? Anything would be appreciated.

  Thank you.

  If this is the data that you need to return you will almost certainly need to commit to professional assistance in the recovery of the data.  Programs you think or 'know' are to recover files deleted, which is much easier than the task that awaits you.  These programs almost certainly will not work in the hard disk in this condition, and the more you mess with him it is less likely that a professional will be able to recover the files.

  writing in the new message: * e-mail address is removed from the privacy... *

  External hard drive: LaCie (500 GB)
  Operating system: Windows Vista (home edition)

  I store all my information on my external hard drive. One day after I restarted my computer Windows suggested I run CHKDSK on the external hard drive, so I let him do his thing.

  CHKDSK got to 60%, and then there was a power outage at my house. I understand that no matter what CHKDSK is unable to pick up where you left, so now when I load to the top of my external hard drive, all the files and folders that were once there are now gone, all that's left are six or seven files with extension *.dsk. How to recover all my files or let CHKDSK finish?

  I know that once you reformat a computer shops who can always there all the information the back before the format, so I know that there is a way to solve this problem / recover my files, however, I'm not so smart that.

  Help, please? Anything would be appreciated.

  Thank you.

• All files on external Synology is not found

  Hi guys, I'm not an expert but had been using L6 for a few months and after 2 weeks I wanted to access my files on external Synology but all the files in the module development of break is not found. Strange to me is that in the library, everything seems ok - connection for external hard drive is ok, not smoker of question marks on the folder or files. I can also access Synology from the Finder.

  I had an experience - is installed directly in Lightroom a local folder (on my MacBook) Synology and once he was moved again, I was not able to find these files in the develop module, but again, see the moved folder and the previous file.

  I'm completely confused... running El Captian on MacBook Pro.

  Please help... Thank you!

  Hello! Looks like I've found the bug - the name of the shared folder on the Synology has been notably Polish letter that confuses the relationship between Lightroom and Synology.
  Only, I wonder how it worked before... perhapse Synology update caused the problem.

  PS. I have the almost the same configuration with 2 TB WD red 3

• Is it possible to highlight all files (video & audio) that are to the right of the read head on my calendar? Or to the right of my mouse?

  I divided a complex project in which I half of the video clips to the left of my calendar and the other half to the right. I now want to drag the half right over and plug it into the half left, but there are so many files very high in the slot machine video 7, I can't click and drag to highlight all the. What should I do?

  Take a look at some tools and you will find the one you need.  There is a shortcut for that as well.

  Council that it has an arrow pointing to the right.

  Use it with Shift to enter several tracks.

• 7 eliminated Windows Outlook Express & all files and settings. Are they buried somewhere were I can get back in?

  Laptop is a Dell Studio 15, about 1 month.
  Upgrade Vista to Windows 7.
  Previously, I used Outlook Express and saved some important emails into different folders in Outlook.   I didn't know that outlook Express would be gone.  Message says "e-mail & settings files will remain available after the upgrade".  Loaded a new email program (Mozilla Thunderbird) but can not find some old files of e-mail.

  If you use Outlook on a previous version of Windows, and then once you have upgraded to Windows 7 then you should be able to reinstall Outlook and open your previous email information.  For longer instructions with migration check Outlook the

  Office forum.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.