11g R2 RAC on RHEL and upgrade the kernel

Similar Questions

• How to compile and install the kernel modules after nation and nipalk for installation of Gentoo 64 bit?

  We are trying to install a PCIe 6251 DAQ card in a box of Gentoo 64 bit running Linux kernel 2.6.28 - gentoo-r5 4.3.2 - gcc and glibc - 2.8.  We have installed RPM utilities to manage the installation.  The current problem is that we are not able to compile and install the kernel modules: nidmxfk, nimsdrk, nimstsk and nipxirmk.  Here's a summary of what we have done so far, and to what extent we got.

  First of all, we have changed the configuration of the kernel that we could export the init_mm unused symbol by changing the configuration option of the CONFIG_UNUSED_SYMBOLS = o kernel and recompile the kernel.  Then we installed LabView 8.6.1.  Then we ran the nation 1.9 installer who has installed the source code in vain on the compilation.  To resolve this problem, we have changed the function of pte_offset to pte_offset_kernel by editing the file/usr/local/natinst/nation/configures following the instructions here:

  http://decibel.NI.com/content/docs/doc-4511

  We were then able to compile and install the kernel nation module thanks to:

  . / configure
  do
  make install

  lsmod said that nation has been properly installed.  Then we ran the installer for DAQmx 8.0.1 by:

  . / INSTALL - nodeps

  To do this, we have received errors indicating that LabView support could not be installed because check addictive (incorrectly we think) stated that labviewbase86 has not been installed; This caused the installer to have an abortion.  Therefore, we refused to install support for LabView 8.6 and revived the installation program which produces the output:

  Installation of the driver NOR-DAQmx Distribution of Linux Installer version 8.0.1f0...

  Already to jump Edward - 1.9.0 - f0.noarch.rpm installation, same or newer
  installed.

  Pre Installation...

  Preparing... ########################################### [100%]
  1:nitimingi ########################################### [ 4%]
  2:nipalki ########################################### [ 7%]
  3:nipali ########################################### [ 11%]
  RC0.d directory not found, startup script is not accredited with init levels.
  4:labview80 - rte # [14%]
  5:ni653x ########################################### [ 18%]
  6:nicdigi ########################################### [ 21%]
  7:nidaqmxcapiexmp # [25%]
  8:nidaqmxcapihelp # [29%]
  9:nidaqmxcapii # [32%]
  LN: create the symbolic link ' / usr/local/include/NIDAQmx.h': no such file or directory
  10:nidaqmxcfgi # [36%]
  11:nidaqmxef # [39%]
  12:nidaqmxhelp # [43%]
  13:nidaqmxinfi # [46%]
  14:nidaqmxswitch # [50%]
  15:nidimi ########################################### [ 54%]
  16:nidsai ########################################### [ 57%]
  17:nimdbgi ########################################### [ 61%]
  18:nimioi ########################################### [ 64%]
  19:nimru2i ########################################### [ 68%]
  20:nimxdfi ########################################### [ 71%]
  21:nimxpi ########################################### [ 75%]
  22:nimxs ########################################### [ 79%]
  RC0.d directory not found, startup script is not accredited with init levels.
  23:niorbi ########################################### [ 82%]
  24:nipxirmi ########################################### [ 86%]
  25:nirpci ########################################### [ 89%]
  26:niscarabmm # [93%]
  27:niscxi ########################################### [ 96%]
  28:nistci ########################################### [100%]

  After Installation...

  At this point, after reading this report, we used the Gentoo rc update utility to add several scripts for the boot runlevel initialisation:

  update of RC - a boot nipple
  update of RC - a bunch of nipxirmu
  update of RC - a bunch of mxssvr
  update of RC - a bunch of nisvcloc
  update of RC - a bunch of nidevldu

  When the computer reboots, you get an error message indicating that the following kernel modules are not: nidmxfk, nimsdrk, nimstsk and nipxirmk.  lsmod shows that the nation and nipalk are installed, but no other kernel modules NOR are present.  modprobe-l shows that only nation and nipalk are available.

  So we have several questions:

  1. we install drivers in the correct order?  Should use us NI-VISA 4.5 or NOR-488. 2 rather than DAQmx 8.0.1?

  2. What kernel modules should be loaded for this equipment run?  How to compile and install the ones that we have yet, specifically nidmxfk, nimsdrk, nimstsk and nipxirmk?  Are there others?

  3. How can we get the installer to properly recognize that we have installed LabView Core and install support for LabView?  Are there additional kernel modules related to the support of LabView?

  4. What is the symbolic link that was not created in the DAQmx installation report? (ln: create the symbolic link ' / usr/local/include/NIDAQmx.h': no such file or directory)?

  I apologize for so many questions, but these seem to be the last obstacles to obtaining OR runs correctly on this system.  Is there other information that we can provide that would be useful?  Thanks for any help or suggestions you can offer.

  Craig

  Hey Craig,.

  Given that you use 64-bit Linux all kernel modules must be compiled for 64 - bit.  User mode binaries can be 32-bit, assuming that you have installed the 32-bit support libraries.

  NOR-DAQmx is a complex architecture and requires several kernel modules to support your PCIe card.  Most of these kernel modules have not been brought to support 64-bit Linux.  Some kernel modules are components infrustructure that are shared with other pilots OR as NI-VISA and NOR-488. 2 and have been brought to support 64-bit Linux.  Unfortunately, you need all the modules to use your hardware.

  I hope that answers your question.

  Shawn Bohrer

  National Instruments

• Move and upgrade the server vCenter Server

  I'm about to move our vCenter server and our database out of our ESX cluster. The current server is version 4.0.0 using a database server SQL 2008 32-bit (on a separate server).

  I created two new 64-bit servers in 2008, one for vCenter and one for the SQL 2008 64 bit server. Ideally, I would like to move my database from the old SQL Server to the new, installing vCenter 4.1 on the new server and simply point to the migrated database.

  My question is, will this work as expected or that I can't point vCenter 4.1 to a database that has been used with vCenter 4.0 because the structure of the db is different? Basically what I need to install vCenter 4.0, that it points to the migrated database and then upgrade to vCenter 4.1? Thank you.

  
  Dan

  Hello Dan,.

  VCenter Setup will recognize the old DB scheme and modernize the DB accordingly.

  You can 'new' installation vCenter and point the installer to the DB migrated using an ODBC connector and the installer will run the scripts to upgrade DB on the DB.

  As suggested before, make sure you have a full backup of the DB in which case you would need to return to the upgrade.

  See you soon!

• Satellite 4070CDS and upgrade the BIOS.

  Hello
  I have an old Satellite 4070CDS
  S4070CDS/4.3 (Europe) PAS407EYV-DU95

  My first question is, where I can see what version of BIOS is running?
  I tried all kinds of keys at the start, but all I get is the Toshiba logo, and then the operating system starts.

  Second... I want to update BIOS, but I can't find this model on websites of Toshiba.
  It is made in Germany, but even the German site, does not show this particular model.

  The problem is... the drive is dying and I might need to replace it in a few moments.
  So I would like to know if the current BIOS can handle larger disks (40Gig and more).

  Can someone help me out here?
  Thanks in advance.

  To enter the BIOS settings press just ECS after switching on the laptop.

• Speed of memory after adding memory and upgrading the video card problem.

  My XPS 410 ships in September 2007 with a Core 2 Quad (Q6600) 2.4 ghz processor and two gigs of 800 mhz DDR2 SDRAM. Recently, I added two concerts more than 800 mhz DDR2 SDRAM and replaced my GeForce 8600 GTS with a GeForce 9500 GT with 1 GB of video memory. When I started the system, all four gigabytes of memory have been recognized, but was only running at 667 mhz. Can I fix this? This means that the original memory, or the new memory is really 667 mhz DDR2 SDRAM and not the 800 mhz DDR2 SDRAM I paid for? There are other possible reasons for this?

  Hi RuralDigital,

  I will need some additional information to help you best.

  Ø you have 32 bit or 64 bit Vista?

  O do you have 667 MHz RAM in your computer?

  When you use one more memory RAM clocked with one less clocked the two Rams, RAM will run at a lower speed RAM, that means that when you install a DDR2 667 MHz and DDR2 800 MHz clock speed, maximum RAM memory will be lower among the 2 cylinders speed, i.e., 667 Mhz.

  Then I suggest you to check if the speed of the Rams is the same.

  You can also check out the link below.

  http://msdn.Microsoft.com/en-us/library/aa366778 (VS.85) .aspx #physical_memory_limits_windows_vista

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• Failed to upgrade the kernel

  I m run the upgrade of the DMS to 5.2 so everything first, I had to go to 5.1, now I m trying to update core A1 in DMP4305 but when I creates the task advanced to a firmware that I can not choose the file I need after that I have to download as a new asset in the library.

  Hope you have comments.

  Thank you

  The DMP is running Firmware 5.0 and 5.1 kernel.

  -->, You must first upgrade the Firmware 5.0 to 5.1.

  --> Once the Firmware is upgraded to 5.1 and the DMP rebooted & verified the upgrade succeeded then

  5.2 kernel upgrade.  and then the Firmware 5.2.

  Screenshots tell him all the 8-)

  T.

• Microsoft should update Windows Media Player to play all kinds of videos and upgrade the Windows Photo Viewer to open all types of photos

  Original title: microsoft should spend there windows media player that can play any type of vedio.it will traditionally use media player to download other players instead.

  Microsoft should there be upgraded windows media player that can play any type of vedio.it will traditionally use media player to download other players instead. and also upgrad windows photo viewer to open all types of photos...

  The latest version of Windows Media Player that could open almost any multimedia file was version 6.4. Starting from this version, Microsoft have not been allowed to allow WMP to play almost any type of media file, and they were taken to court top.

  That's why Microsoft does not now permit. Apparently, the decisions of the Court are there to give other media players, including Apple stuff, a foothold in the market. I don't think Microsoft 3rd party codecs use same lawyer in case they have trouble.

• If I remove and upgrade the operating system of a computer can I put it on another?

  Re-use of software upgrade to Windows 7

  Hello

  My old laptop was upgraded from vista to windows 7 using the upgrade CD. This laptop I sold now with its settings back to its original format.

  I want to know that the upgrade has been removed from the old laptop so I can use the CD to upgrade for a different computer.

  Thank you

  Rowland

  As long as the old laptop that you sold has no Windows 7 top and you sell it with Vista installed, you are free to reuse your upgrade on another computer.

• activation and upgrade the hard drive

  I plan to upgrade my laptop with a new solid state drive. Do I have to disable my software Adobe CC on the old disk and reactivated once the new drive is installed?

  May be more prudent to turn off first, but I didn't need to do that when I used the migration program supplied with my new SSD to re - create the new disk from the old & make it the root of the C: drive.

  I was nervous and pleasantly surprised when everything went smoothly.

  New player = Samsung 840 EVO 1 TB SSD

  Migrated from Intel SSDA2M160G2GCN, who has been & is still installed on the computer.

• Switch from win to linux and upgrade the version

  Hello
  I have 1 TB V8 DB on Windows, I'm planning to level to 10 gr 2 and move it to OEL
  
  What is the best option, switching to linux first or upgrading to 10g first?
  
  I intend to upgrade to 10g first, if I can benefit from the RMAN CONVERT command?
  any advise?
  Thank you

  user8803475 wrote:
  ...
  I intend to upgrade to 10g first, if I can benefit from the RMAN CONVERT command?

  If you have the space on your source server, what you plan is really an easy way to achieve what you want to do (and DATABASE CONVERT is feasible since the two BONES are small boutien).
  Import/export could also be a solution, but may take longer and requires you to create the target database...

  Nicolas.

• Clone HARD disk backup and upgrade the HDD on a Vaio S13

  I just bought a laptop SVS13133CGB. I want to change the hard drive for an SSD, because of the problems of latency of disk it gives me with the drive 5400 RPM. Also, I have to change to Windows 7, because of the problems of compaitbality with the applications I run.

  My questions are-

  -Are there problems with an SSD on this model? I intend to use a Samsung 840 250 GB SSD and do a clean install of windows 7 on it.

  -I want to save the data of the existing drive, imaging or cloning, so that I can have the installtion Windows 8 + the recovery partion. (also the key/cert/activation)  Does anyone know if I restore it, everything will work according to the normal? I.e. the assist, the stamina/speed etc button button... I m not sure what cloning software I will use, like I always do research which at the moment.

  Has anyone done the above?

  ravinius,

  1. I don't think there's any question replacing a HDD with a SSD... we can only comment on what has been installed from factory but as I said, I don't see a problem to an SSD.

  2. it is preferable that you create system recovery disc and run that, if you want to revert to Windows 8.  Regarding what makes an exact image, I don't know on this one there... There are several software cloning there, but we cannot comment/recommend on a specific... If you are running the recovery disc it will restore everything back as if it was fresh from the factory (software wise)...

• Installation and upgrade the hard drive

  
  
  

• to upgrade my iMac yosemite Sierra do I need save iWork applications first and upgrade etc.?

  To upgrade my iMac Yosemite Sierra can I first of all backup and upgrade the iWork etc. applications. ?

  He can't make a backup.  You don't need to do anything else.

• ProBook 455 L3P93ES G2 #ABZ: installation without end and return the video driver AMD R6 and R7 M260DX and stop on a black screen system

  Hello, I'm in trouble with this problem. If anyone can help me, I appreciate a lot. Thank you in advance.

  Laptop: HP ProBook 455 G2 L3P93ES #ABZ

  Problem: windows back AMD R6 and R7 video driver to the old version of windows update install. Return process the screen come black and stop here.

  Procedure, I followed:

  1. updating the bios with the latest version (M75_0141.bin)
  2. new facility created by HP Cloud recovery customer USB boot disk
  3. Install the drivers and programs of the HPSoftwareSetup.exe util
  4. Connect the network cable and upgrade the drivers and the HP Support tool programs assistant
  5. Install the software
  6. Join the Organization's domain
  7. Force Windows Update to version 1607 by the upgrade of Windows tool
  8. Windows Update

  Item 4, at random, windows update 10 and return the driver from these versions:

  • 15.201.1301.0
  • 15.201.2301.0
  • 15.300.1025.1001

  I don't have install the AMD specific video driver (Radeon Crimson Edition 16.7.3 software) or drivers from the Chipset AMD (Crimson edition 16.7.3) because when I try in a previous installation of test I had the same problems

  To restore the display I have to start windows in safe mode and disable the two R6 and R7 display cards, and then restart. After that I can reactivate the cards one time.

  This device first question first time I install Windows 10 the year in August (Yes, after a few days Windows 10 out)

  Any help that will be much appreciate because I have to reinstall on 20 laptops for the school to start the day.

  Thank you

  ScuolaCarovana

  Hello;
  
  Let me welcome you on the HP forums!
  
  From your description, it seems that, after you have installed the correct video driver for your ProBook (15.201.1301) AMD, Windows Update is then by installing a different driver on top of that, right version?

  If this is the case, you must follow these instructions to STOP Windows update update drivers: how stop Windows 10 to update automatically the device drivers - windows Windows 10-10

  Once you do this, you should not see updates to the pilot after that.

  Good luck

• Migration and upgrade of databases

  Hello

  We intend to migrate from the data center to the new location. The new data center already have the hardware. We must move the dump data and upgrade the database. Our database most are on Oracle

  10g solar UNIX and the new material is on Oracle 11.2.0.4 with Linux (Oracle or Redhat Linux). Do the following activity:

  (1) taking the export on the basis of existing data.

  (2) move the dump of the export to the new location, as well as archived data that is stored in the Ribbon. (this is where a suggestion required more about different ways to do it).

  (3) import and the upgrade of the database in the new location.

  Might suggest a certain to please the strategy and useful tool which, for this activity.

  You should move all the 100 + databases in a window of 48 hours with datapump? It is a command

  What is the capacity of the network (i.e. How fat is the pipe) between the two locations and how pieces are? As a general rule, there should be no loss of data or corruption during the transfer of files over a network. The time required for move/upgrade a database of 300G can only be determined by performing a test upgrade that looks close in the middle of production.

  HTH
  Srini