DX 5150 red flashing LED
Hello, my DX 5150 front led flashes red / beep 5 times. It does not start (the monitor receives no signal). I tried reinstalling the memory cards into their slots without change... I'm helpless as to what I should try next. < br > < br > thank you, CJ Yates < br > < br > < br >
Hello:
It's a memory (cause) or motherboard failure.
Try to start the PC with just a chip memory at once.
There's a good chance one of the chips is bad.
If the ring tone stops when you run with 1 module installed, keep testing each of them until you get the beeps again.
Then you have isolated the bad memory module.
If the PC keeps beeping no matter what you do with the memory, troubleshooting guide then suggests that the motherboard is bad.
Tags: HP Desktops
Similar Questions
-
Z10 Z10 BlackBerry - screen white + red flashing led
On the connection of my new Z10 with BBlink, received a an option for available upgrades. On the upgrade of the screen turned white and LED flashes red - 3 2 short long - white and starts the sequence again. Can't restore, restart or anything like that. Help wanted please e-mail.
Thanks Arsen, but that did not help. I did all the stuff in my bag, but nothing helped. I think that the problem is inadequate compatibility between BB / RIM and MAC. So stick to PC for all restoration and Retrofits for BB. However, I have to cut a long story short, the solution is to download the new software from the site of the developer BB here using a PC: and follow the simple instructions. He took every 20 minutes to settle.
https://developer.BlackBerry.com/DevZone/blackberry10devalpha/devalpha_update.html
Good luck to all.
-
BlackBerry Smartphones red flashing LED 2/3/2/3/2/3 and black screen
My Bro-in-law's screen went black and it flashes red two times/3 times/2 times/3 times. Hard shock has nothing and connected to several sources of energy without change...
Any ideas?
Ms. Keny
Leave the battery choke. Remove/replace the battery and charge it. It should pop back, but this is a temporary fix. It will happen again. Back up your Blackberry Desktop Manager data and replace the unit.
-
BlackBerry Smartphones constantly red flashing led when nothing has been received
Since yesterday evening, my phone vibrated randomly and flashed as if I had an e-mail / SMS, but when I go to to read anything there. The indicator light flashes continuously and at one point, it was vibrating every 10 minutes even if nothing has been received and I didn't touch it! Now it's just blinks ALL THE TIME and makes me crazy.
I turned, out the battery many times and it solves for all the minutes and she decides to Flash. I don't know what else to try! It's actually makes me crazy as all I can see is that stupid flashing!
Any suggestions?
I've checked everything and I had not received anything about it either, had no idea why he flickered constantly!
I have just turned off and taken out of the battery for the umpteenth time and fingers crossed it seems to be stopped!
Since the texts received and she flashed as usual and went away when I read it, thank God! Don't understand why the last time was different from the multitude of times I have tried before but!
Thanks for the suggestion!
-
BlackBerry BlackBerry Curve Smartphones - missing icon and flashing LED
Hi, I just got my BlackBerry Curve yesterday and have two questions that left me mouth gaping so far.
(1) my menu has no icon "Settings and tools", I tried the option "Show all", still not there. How to do it?
(2) I have retrieve email on my PC for the most and that you want to turn off the blinking red light because I get lots of emails and the light is constantly flashing and boring.
Thanks in advance. Andi
EDIT: Post was shared by another thread, edited title
God_Graham wrote:
You can turn off the red flashing notification by going to
Messages > (key Blackberry) Options > General Options > display indicator new Message 'NO '.
This will cause the unit to not display the red flashing LED and you will not see a red * click the e-mail until the upper part of the screen.
The icon options should be on the device, if you are adamant that you can't find it then I would suggest that reload the software on the device.
Sorry, but will not disable the led red LED, GRAHAM of GOD. Only, it will disable the indicator red star on the e-mail inbox.
To disable the LED indicator, edit your profiles.
1. Select the profiles icon
2. a box will appear where you can quickly choose between Loud, vibrate, quiet, normal, phone only, and outside.
3. If you want to change the notification of messages assigned for device applications, and then select the last option, advanced options
4. Select the profile you want to change. (Loud, vibrate, quiet, Normal (default), phone only, Off)
Note: on the 8100, 8800 and 8300 models: do not click on the trackball. Instead of this, click on the menu button to the left of the trackball).
Note: The profile that is in use will tell: (active)5. you will now see a list of all applications that can have an assigned tone (browser, calendar, level 1 Messages, Messages ([email protected]), Messenger, MMS, phone, SMS, job ect..)
6. Select the application you want to change the tone / in this case, notification Messages, or your specific e-mail address
7. you can now edit the tones of the case and Holster / notifications.
(a) select between: none, Tone, vibrate, vibrate + tone
(b) select the range that you want to use
(c) Select Volume (the options are mute, low, medium, high, climbing)
(d) to select the number of beeps (the options are 1, 2, 3)
(e) select Repeat Notification (options are None, flashing LED)
(f) if value vibrator or vibrate + tone and select number of Vibrations (the options are 1, 2, 3)8. repeat a to e for each of the applications set out in number 5 above
-
Xperia Z2 orange flashing led when it is connected to the magnetic charge lead
Hey guys. I bought this phone off of a friend. His three months and works very well. But the other night, I accidentally put the magnetic port on the back and the phone is completely dead. I panicked and I tried every possible combination. I finally got a red when I plugged it into the microusb port. He turned in 10 minutes as usual.
Now, whenever I have fix the magnetic cord (correctly) I get a flashing led orange and the unit charge at all.
What is the flashing orange led average? Warranty covers the magnetic port? I hope someone can help me
Hello everyone. I have problems with the magnetic charge on my Z2 port. He simply not to charge the device. He also was heat when he was in charge via USB. Sometimes, it would not even load!
I was trying to just live with it until one day the phone turned off and never started upward for about a day.
I knew at that stage he had no choice but to request an RMA number for these issues.
When I called to tell them my problems, I told them specifically 'THERE IS a PROBLEM WITH THE MAGNETIC PORT', 'THE PHONE REFUSED to LOAD SOMETIMES' and 'THE PHONE HEATS DURING CHARGE'.
The representative on the other end told me several times that he understands the problem and they will be addressed when he arrived at the repair shop.
So, I packed the phone upward and expelled from Ontario (shipping cost me $40) and thinking that once he comes back, it'll work like it should.
---
It's where I've never been more wrong.
I'll be back on the phone today and it opens as soon as I could.
First thing I did, is trying to turn it on. Absolutely nothing. No light, no low battery screen, nothing.
So when I got home, I plugged the thing in a USB AC charger. The first 10 minutes, that there was only one red LED and nothing else.
After 10 minutes, I could see the green of the battery on the screen.
Again 5 minutes later, I was able to turn the phone on. He was sitting at 2%.
What makes me believe that the phone was left or COMPLETELY discharged before shipping. These people in repair facilities don't know how harmful it is for a battery to be discharged to comepletely?
---
The second and most outrageous of the thing is the main reason for the phone was sent he was not yet fixed!
I tried to plug in the charger magnetic port (with a spare cord, as well as the docking station) and the phone does EXACTLY the same thing!
In fact, it is an exact quote from that work says:
"THE PHONE IS IN CHARGE AND WORKS WELL. "PLEASE SEND TO THE CABLE USB AND CHARGER IF PROBLEM P-<- they="" didn't="" even="" finish="" the="">->
"Software update, direct call, past quality control."
I am so totally outraged and disgusted with Sony now.
-
BlackBerry Smartphones flashing led
How to turn signal flashing led?
The answer to this depends on what color it flashes.
If it is red, it's for messages. Go to profile profiles/advanced/active / and change 'Notification to repeat' to none. You will need to do this for each email, sms, mms, telephone, etc...
If it is green, go to Options/screen & keyboard/light cover and change it to off.
If you want to disable the blue for bluetooth connection, go to Options, Bluetooth, Menu, OPtions and change LED indicator connection disabled
Amber is for low battery, either disable or load the BB
That's all I can think about, but I feel that I'm leaving something... If I did, I'm sure someone will jump in and help.
-
Epson C86 flashing red flashing
original title: EPSON C86 FIRE RED FLASHING
Printer will not work. Two red lights, in front of the button start continues to blink. Printer was working and stopped during printing.
Hello
If the information below does not solve the problem, contact Epson as it can be hardware related
___________________________________________________________________________
· try to uninstall and reinstall and use the latest printer drivers VISTA for your model of the manufacturer of the printer
· ________________________________________________________________
http://support.Microsoft.com/GP/printing_problems
Read the information above from Microsoft about fixing printer problems.
· ________________________________________________________________
You can also track information to try to solve your problems of printer below
read the printer correct that information the slot microsoft, including the 'fix - it' and the information of the links to the other
Solve printer problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems
and read this microsoft tutorial too
Introduction
This tutorial is designed to help you identify and fix the problem printer common windows problems, including print errors, or errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.
How to use this tutorial
For best results, complete each step before move you on to the next. Try to print after each step before moving on to the next step.
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
-
My sony Z2 red flashing of screen line every corner.
The appearance of the red flash line 1-3 seconds then stop. After awhile, it flashes again. Help me.. Y at - it something wrong with my phone. ?
1 settings
2. Developer options
3 turn them off -
My hp deject 2050 show A three red flashing lights in two inks indicating light and below
My hp deject 2050 show A three red flashing lights in two inks indicating light and below. Give the solution I need a software to correct this error.
Hello
Please contact Microsoft Community.
- Are you facing problems printing while trying to print using this printer?
Flashing lights that appear on your represents printer Office jet respective specific issues of the order and the State of enlightenment, I suggest you follow the link below and select the correct options to visualize the respective solution.
Hope this information was helpful and let us know if you need more assistance. WE will be happy to help
-
Green, green and red flashing lights
Can someone tell me this that green, green and red flashing lights on an access point 3602 indicates?
Thank you
Chris
AP attempts to discover a WLC (CAPWAP discovery in the process).
-
New passport Passport brand blackBerry will not restart after the update - flashing led Red
Help...
Unboxed, updated (sim card not yet in)-restarted
Black screen, won't do anything outside flash its LED. Sequence is flash, pause, six fast flashes, long break and start over again once.
Have you tried dialing 30 days of free support, but guess what, you can get no further than to hear the options.
At the present time - not feeling the love... (RANT ON)
Hi Wolf, strangely enough, shortly after my post the BlackBerry support number worked, and the nice man on the end of the line follow the same procedure as you suggest. Everything now fine and dandy! Thanks for your comments
-
Pavilion DV7: Flashing LED to the AC port
Hi, my laptop has recently closed down and will make is no longer on. The battery level is zero, but when I plug in the power cord, the indicator light flashes red and white and the battery does not charge. I tried the hard reset without success, someone has any ideas before you start putting money in my machine?
Thank you
Dear customer,
Welcome and thanks for posting your question on the Forum of Support HP
It seems that you are not able to turn on the laptop and tried to solve the problem
Please perform steps listed to find out if it is a hardware or software problem below:
1. remove all cables and devices, disconnect them and try to turn on the device
2. check the LED light situation and ensure the action of the spring button / stop is normal
3 Exchange with a well known power cord and the AC adapter
4 Pack no adapters are available, check if the power adaptor is slightly warm
Note: This will give us an indication that the power adapter could be good
5. do you know if the laptop was in battery or power adapter when you used the last time
Note: Make sure that there is no spill of liquid or cutting
6. check if the Port of the AC adaptor is loose/broken
Note: If the laptop is not lit even with a well known power adapter this confirms the hardware failure with the system board or power DC Circuit
Hope this helps, for other queries in response to the post and feel free to join us again
* Click on the button white Thumbs Up on the left to say thank you *.
Make it easier for others to find solutions by checking a response "accept as Solution" if it solves your problem.
Thank you
K N R K
Although I am an employee of HP, I speak for myself and not for HP -
Hey can anyone solve my problem, I'm working on a project that includes a flashlight and LED. And I coded the led but many attempts to fix but do not fix any who know this problem? or how to fix it?
Page { titleBar: CustomTitleBar { titleText: "Led" titleTextColor: Color.White titleBarBackgroundColor: Color.Red titleTextFontSize: FontSize.XXLarge titleTextFontWeight: FontWeight.W100 } Container { Header { title: "LED" bottomMargin: 20 } DropDown { id: colorChooser horizontalAlignment: HorizontalAlignment.Center title: "LED Color" onSelectedIndexChanged: { LedColor.Yellow } Option { text: "Red" value: LedColor.Red imageSource: "asset:///images/red.png" selected: true } Option { text: "Green" value: LedColor.Green imageSource: "asset:///images/green.png" } Option { text: "Blue" value: LedColor.Blue imageSource: "asset:///images/blue.png" } Option { text: "Yellow" value: LedColor.Yellow imageSource: "asset:///images/yellow.png" } Option { text: "Cyan" value: LedColor.Cyan imageSource: "asset:///images/cyan.png" } Option { text: "Magenta" value: LedColor.Magenta imageSource: "asset:///images/magenta.png" } Option { text: "White" value: LedColor.White imageSource: "asset:///images/white.png" } } attachedObjects: Led { id: led color: colorChooser.selectedValue } } actions: [ ActionItem { id: btnLedOnOff1 title: "LED On" imageSource: "asset:///images/on.png" onTriggered: { ledStatus = !ledStatus; if(ledStatus == true) { title = "LED Off"; imageSource = "asset:///images/off.png" led.flash(); } else if(ledStatus == false) { title = "LED On"; imageSource = "asset:///images/on.png" led.cancel(); } } ActionBar.placement: ActionBarPlacement.Signature } ] }
Thanks in advance. and I'll mark your snap and MAS
Ignore it, it is a known problem (there is a thread about these warnings somewhere)
Run and see if it works
-
BlackBerry Smartphones red flashing (New Messages) - how long it will stay on?
I need some information on the flashing red led that flashes when you receive new messages. I noticed that it expires after a while... do not stay even though I have not checked my messages and I have indeed always for new messages. Does anyone know the basics about that? I found nothing in my manual. It would be good to know how this feature works. For example, I can wake up in the morning and have 21 new messages, but no Flash. It stops blinking after a while to save the life of the battery? I have no idea. Thank you very much for all your advice/help.
Aimee, the notification light only stays on for about 15 minutes after the last message again.
If you want more you need BBAlerts, which is well worth for the features, it gives you in extended and customized notifications setting.
http://www.bbymelsoftware.com/BBAlerts/
Maybe you are looking for
-
Re: Satellite Pro A300 - 2C4 "Windows 7 Professional Upgrade DVD" upgrade
We have a Satellite Pro A300 - 2C4 (bought on 23-11-09) that came with Vista Business 32-bit installed, but has been downgraded (using the provided diskette) to Windows XP due to the demands of corporate network. When Windows 7 became available, I bo
-
Qosmio F60 all the time in the 80-90% fan
Hello, my fan seems to be all the time and it's always 80-90%.I am just a spyware scan and my open IE... CPU is 70%...What is the problem with this laptop?
-
Qosmio F20: I can't complete this NVIDIA GeForce Go 6600 for Vista driver
Dear Francisco,All the friend when I install this driver. It always shows me the message CE DRIVER INCOMPATIBLE WITH THE MATERIAL. Then I try to click the yes button to try again. The installation was carried out, but when I restart the machine then
-
Problem with iface on windows 2008 server
Hello. I have 2 identical servers with controller intel 80003es2lan gigabit ethernet based on supermicro x7dbu motherboad.When iam power on my servers, all virtual machines (windows 2003, xp, linux, freebsd) start normally, but in the virtual machine