12 months no interest thing

Similar Questions

• Error in payment using 18-month deferred interest opt

  Try buying a bike plan x under 18 months deferred interest payment that I get the following error:

  We have problems of your financing payment. Please return your order at your convenience. If you continue to experience problems or have questions please call 1-855-334-3613 (TDD / TTY 1-888-819-1918).

  I called the number and the phone rep didn't know why it was happening. After checking my credit account was going well he told me to start a chat session with support staff on motorola.com site and ask for more info. He wait on the line and make sure that the chat-based support staff has not just redirect to the same number. But when my turn came on the chat session, it says that no one could help me and the session was closed.

  Try later in the day I got the error message on the black before 32 GB model being out of stock. Then I tried again, earlier and it seems to be new stock, but the funding error is back. What is going on?

  For some reason any it just occurred to me that I can use a credit card for the order (I have a similar agreement with another company). Obviously, I would have preferred using my motorola/comenity account, but at this point I'm just glad I got to put an end to this chapter of my life.

• Interesting things, however, strangers? StackPane, animations and filters.

  CHANGE (17/01/2014):

  
  

  As suggested by jsmith , I changed this thread so we could treat the on only one thing. Other issues that existed here before I put each in its own separate discussion. I hope that now we can deal with it properly, so start New:

  
  

  For the first test case, I tried to create a program that has some controls and I put a animated background behind her done with nodes in transition. With such a test, I received the following Visual result:

  
  

  http://s24.postimg.org/tk0psfm2t/programa_errado.jpg

  The background is made of white circles que increase and decrease more than time asynchronously. Notice how the interface (controls) is put on the top, and Unfortunately, it is not aligned for what is of the application window. Tthere resulting code from the image above can be seen below:

  
  

  import javafx.animation.Animation;
  import javafx.animation.KeyFrame;
  import javafx.animation.KeyValue;
  import javafx.animation.Timeline;
  import javafx.application.Application;
  import javafx.event.ActionEvent;
  import javafx.event.EventHandler;
  import javafx.geometry.Pos;
  import javafx.scene.Group;
  import javafx.scene.Node;
  import javafx.scene.Scene;
  import javafx.scene.control.Button;
  import javafx.scene.control.Label;
  import javafx.scene.control.TextArea;
  import javafx.scene.effect.GaussianBlur;
  import javafx.scene.layout.StackPane;
  import javafx.scene.layout.VBox;
  import javafx.scene.paint.Color;
  import javafx.scene.shape.Circle;
  import javafx.scene.shape.Rectangle;
  import javafx.scene.text.Font;
  import javafx.stage.Stage;
  import javafx.util.Duration;
  
  public class AnimatedBackground extends Application
  {
      // #########################################################################################################
      //                                                                                                      MAIN
      // #########################################################################################################
     
      public static void main(String[] args)
      {
          Application.launch(args);
      }
  
      // #########################################################################################################
      //                                                                                                INSTANCES
      // #########################################################################################################
     
      private Group root;
      private Group grp_hexagons;
      private Rectangle rect_background;
      private Scene cenario;
     
      // UI
     
      private VBox lay_box_controls;
     
      private Label lab_test;
      private TextArea texA_test;
      private Button but_test;
     
      // #########################################################################################################
      //                                                                                                 FX INIT
      // #########################################################################################################
     
      @Override public void start(Stage stage) throws Exception
      {
          this.confFX();
         
          cenario = new Scene(this.root , 640 , 480);
         
          this.rect_background.widthProperty().bind(this.cenario.widthProperty());
          this.rect_background.heightProperty().bind(this.cenario.heightProperty());
  
          stage.setScene(cenario);
          stage.setTitle("Meu programa JavaFX - R.D.S.");
          stage.show();
      }
     
      protected void confFX()
      {
          this.root = new Group();
          this.grp_hexagons = new Group();
         
          // Initiate the circles and all animation asynchronously.
          for(int cont = 0 ; cont < 15 ; cont++)
          {
              Circle circle = new Circle();
              circle.setFill(Color.WHITE);
              circle.setEffect(new GaussianBlur(Math.random() * 8 + 2));
              circle.setOpacity(Math.random());
              circle.setRadius(20);
             
              this.grp_hexagons.getChildren().add(circle);
             
              double randScale = (Math.random() * 4) + 1;
             
              KeyValue kValueX = new KeyValue(circle.scaleXProperty() , randScale);
              KeyValue kValueY = new KeyValue(circle.scaleYProperty() , randScale);
              KeyFrame kFrame = new KeyFrame(Duration.millis(5000 + (Math.random() * 5000)) , kValueX , kValueY);
             
              Timeline timeL = new Timeline();
              timeL.getKeyFrames().add(kFrame);
              timeL.setAutoReverse(true);
              timeL.setCycleCount(Animation.INDEFINITE);
              timeL.play();
          }
  
          this.rect_background = new Rectangle();
  
          this.root.getChildren().add(this.rect_background);
          this.root.getChildren().add(this.grp_hexagons);
         
          // UI
         
          this.lay_box_controls = new VBox();
          this.lay_box_controls.setSpacing(20);
          this.lay_box_controls.setAlignment(Pos.CENTER);
         
          this.but_test = new Button("CHANGE POSITIONS");
          this.but_test.setAlignment(Pos.CENTER);
         
  // Change circles position when button is pressed.
          this.but_test.setOnAction(new EventHandler<ActionEvent>()
          {
              @Override public void handle(ActionEvent e)
              {
                  for(Node hexagon : grp_hexagons.getChildren())
                  {
                      hexagon.setTranslateX(Math.random() * cenario.getWidth());
                      hexagon.setTranslateY(Math.random() * cenario.getHeight());
                  }
              }
          });
         
          this.texA_test = new TextArea();
          this.texA_test.setText("This is just a test.");
         
          this.lab_test = new Label("This is just a label.");
          this.lab_test.setTextFill(Color.WHITE);
          this.lab_test.setFont(new Font(32));
         
          this.lay_box_controls.getChildren().add(this.lab_test);
          this.lay_box_controls.getChildren().add(this.texA_test);
          this.lay_box_controls.getChildren().add(this.but_test);
         
          this.root.getChildren().add(this.lay_box_controls);
      }
  }
  
  

  
  I think that my tree of nodes is structured as follows :

  
  

  http://S27.postimg.org/pjpvnlywz/rvore_de_n_s.jpg

  
  

  I also have tried to change the root of my scene graph to StackPane. Unfortunately, the result was weird. Despite my interface controls went to the middle of the window (which is what I wanted), the bottom began to to animate in a totally weird way. I don't know what else to do on this subject. , It would be strange If this type of feature is not exist in JavaFX, because I could easily do this kind of thing to the Swing Framework library and timming. So far, I still can't understand how I could get around this problem. As a user of JavaFX, I think that it would be more interesting if the JavaFX developers would put more cool similar things to present in the documentation us. Well... If someone can help me Iwill be really grateful. I don't know a lot of people peut Can also take advantage of this too.

  
  

  Thank you for your attention and patience in any case.
  

  
  

  Editada por Mensagem: Loa

  It seems to me that I finally got the result I wanted, thanks to God and to you for this. I'd love to share with the community here:

  Using StackPane as root, it seemed to me that I was not getting the desired result. As you say, make use of the group for circles, causes odd effect I spoke. That's because you showed me in the JavaFX API, group is committed to the size of its child nodes. As in this type of animation background changes its size in transition (and because it's in a layout that centralizes things like StackPane), it seems that the circles are not calm and move every time they becoming or shrinkage. Using StackPane as one parent node to the circles, they are all mainly in the center of the Panel, as it is one of the goals of StackPane. As I intend to change their positions, I used the following code block so that it is possible (in the case where triggered when the button is clicked):

  circle.setTranslateX(Math.random() * cenario.getWidth());
  circle.setTranslateY(Math.random() * cenario.getHeight());
  

  He was supposed to distribute the circles in the background of the window. However, it was not quite what happened. This that this resulted in circles in the background OF THE CENTER OF THE BACKGROUND, not distributing from the upper left, as initially planned by me. This means that the starting position in the center of a StackPane node leaves, that is to say StackPane not only centralizes things, but also change the initial position of them. For the circles to be distributed properly, I had to take into account the negative positions, since their origin was like being in the Center. With that, I could find the following code:

  circle.setTranslateX( random.nextInt((int) cenario.getWidth()) - cenario.getWidth() / 2 );
  circle.setTranslateY( random.nextInt((int) cenario.getHeight()) - cenario.getHeight() / 2 );
  

  All this race about ended up giving me the tree of the following nodes:

  http://S14.postimg.org/y887ps3zz/finalnodes.jpg

  And also the following final code:

  import java.util.Random;
  
  import javafx.animation.Animation;
  import javafx.animation.KeyFrame;
  import javafx.animation.KeyValue;
  import javafx.animation.Timeline;
  import javafx.application.Application;
  import javafx.event.ActionEvent;
  import javafx.event.EventHandler;
  import javafx.geometry.Insets;
  import javafx.geometry.Pos;
  import javafx.scene.Node;
  import javafx.scene.Scene;
  import javafx.scene.control.Button;
  import javafx.scene.control.Label;
  import javafx.scene.control.TextArea;
  import javafx.scene.effect.GaussianBlur;
  import javafx.scene.layout.StackPane;
  import javafx.scene.layout.VBox;
  import javafx.scene.paint.Color;
  import javafx.scene.shape.Circle;
  import javafx.scene.shape.Rectangle;
  import javafx.scene.text.Font;
  import javafx.stage.Stage;
  import javafx.util.Duration;
  
  public class AnimatedBackground extends Application
  {
      // #########################################################################################################
      //                                                                                                      MAIN
      // #########################################################################################################
  
      public static void main(String[] args)
      {
          Application.launch(args);
      }
  
      // #########################################################################################################
      //                                                                                                INSTÂNCIAS
      // #########################################################################################################
  
      private StackPane root;
      private StackPane circles;
      private Rectangle rect_background;
      private Scene cenario;
  
      // UI
  
      private VBox lay_box_controls;
  
      private Label lab_test;
      private TextArea texA_test;
      private Button but_test;
  
      // #########################################################################################################
      //                                                                                                 INÍCIO FX
      // #########################################################################################################
  
      @Override public void start(Stage stage) throws Exception
      {
          this.confFX();
  
          cenario = new Scene(this.root , 640 , 480);
  
          this.rect_background.widthProperty().bind(this.cenario.widthProperty());
          this.rect_background.heightProperty().bind(this.cenario.heightProperty());
  
          stage.setScene(cenario);
          stage.setTitle("Meu programa JavaFX - R.D.S.");
          stage.show();
      }
  
      protected void confFX()
      {
          this.root = new StackPane();
  
          this.circles = new StackPane();
          this.circles.setStyle("-fx-border-color:blue");
  
          // Initiate the circles and all animation stuff.
          for(int cont = 0 ; cont < 15 ; cont++)
          {
              Circle circle = new Circle();
              circle.setFill(Color.WHITE);
              circle.setEffect(new GaussianBlur(Math.random() * 8 + 2));
              circle.setOpacity(Math.random());
              circle.setRadius(20);
  
              this.circles.getChildren().add(circle);
  
              double randScale = (Math.random() * 4) + 1;
  
              KeyValue kValueX = new KeyValue(circle.scaleXProperty() , randScale);
              KeyValue kValueY = new KeyValue(circle.scaleYProperty() , randScale);
              KeyFrame kFrame = new KeyFrame(Duration.millis(5000 + (Math.random() * 5000)) , kValueX , kValueY);
  
              Timeline timeL = new Timeline();
              timeL.getKeyFrames().add(kFrame);
              timeL.setAutoReverse(true);
              timeL.setCycleCount(Animation.INDEFINITE);
              timeL.play();
          }
  
          this.rect_background = new Rectangle();
  
          this.root.getChildren().add(this.rect_background);
          this.root.getChildren().add(this.circles);
  
          // UI
  
          this.lay_box_controls = new VBox();
          this.lay_box_controls.setSpacing(20);
          this.lay_box_controls.setAlignment(Pos.CENTER);
          this.lay_box_controls.setPadding(new Insets(0 , 90 , 0 , 90));
  
          this.but_test = new Button("CHANGE POSITIONS");
          this.but_test.setAlignment(Pos.CENTER);
  
          // Pressing the button, the circles will change to random positions.
          this.but_test.setOnAction(new EventHandler()
          {
              @Override public void handle(ActionEvent e)
              {
                  Random random = new Random();
  
                  for(Node circle : circles.getChildren())
                  {
                      // The layout behaves in a very unexpected way.
                      circle.setTranslateX( random.nextInt((int) cenario.getWidth()) - cenario.getWidth() / 2 );
                      circle.setTranslateY( random.nextInt((int) cenario.getHeight()) - cenario.getHeight() / 2 );
                  }
              }
          });
  
          this.texA_test = new TextArea();
          this.texA_test.setText("This is just a test.");
  
          this.lab_test = new Label("This is just a label.");
          this.lab_test.setTextFill(Color.WHITE);
          this.lab_test.setFont(new Font(32));
  
          this.lay_box_controls.getChildren().add(this.lab_test);
          this.lay_box_controls.getChildren().add(this.texA_test);
          this.lay_box_controls.getChildren().add(this.but_test);
  
          this.root.getChildren().add(this.lay_box_controls);
      }
  }
  

  The only little problem that 'left' now is when the user resizes the application. Once that circles are distributed whenever the application is resized they need be distributed again. My test application doesn't have with that in mind, but I think I can solve this problem easily using a layout that arranges the nodes by the edges of a panel using a proportional positioning. For example, should be a sign of provision for organizing nodes always a certain percentage of the edges. This can be done easily with a layout of the custom panel, because AnchorPane behaves in a different way.

  I think that what I have to do now is go back and learn how to create a custom layout Panel. I want to thank all of you for your patience and your good intention to help. Thank you, really!

  If anyone has anything to add, or corrections to what I said earlier, I would be very happy. The richest is this thread, best JavaFX is accepted for other users.

• Insert with errors of journal - interesting feautre or bug?

  rollbackSo, I run the below:

  Insert all

  in (e1)

  employee_id

  first name

  last_name

  E-mail

  phone_number

  hire_date

  job_id

  salary

  commission_pct

  manager_id

  department_id

  ) (the values

  case

  When mod (rn, 7) = 0 then cast (null as number)

  on the other

  employee_id

  end

  first name

  last_name

  E-mail

  phone_number

  hire_date

  job_id

  salary

  commission_pct

  manager_id

  department_id

  ) errors in the journal in err$ _e ('insert_e1 :'|| limit of rejection to_char (sysdate,' hh24 unlimited:mi:ss)) yyyy.mm.dd))

  in e2)

  employee_id

  first name

  last_name

  E-mail

  phone_number

  hire_date

  job_id

  salary

  commission_pct

  manager_id

  department_id

  ) (the values

  case

  When mod (rn, 6) = 0 then cast (null as number)

  on the other

  employee_id

  end

  first name

  last_name

  E-mail

  phone_number

  hire_date

  job_id

  salary

  commission_pct

  manager_id

  department_id

  ) errors in the journal in err$ _e ('insert_e2 :'|| limit of rejection to_char (sysdate,' hh24 unlimited:mi:ss)) yyyy.mm.dd))

  Select

  rownum rn

  employe_id

  first name

  last_name

  E-mail

  phone_number

  hire_date

  job_id

  salary

  commission_pct

  manager_id

  department_id

  e employees

  ;

  Rollback;

  The interesting thing is that after cancellation of the table _e err$ I still have lines that generated errors (violations of constraint not null I produced).

  Is this a feature or a bug?

  It appears like the insertion in the error table is an autonomous transaction that gets committed automatically independent of the transaction containing the insert statement.

  Why wouldn't be so?

  The error table can be even a global temporary table with preserve rows on commit. And I think this can help because I wouldn't need to worry about truncate table prior to insertion and there is no problem if several sessions would use this table.

• 'Error compiling movie/Unknown Error' when exported.  Great list of ' things I've already tried ' s

  Alright, move to the bottom line here, I spent the last hours 3 juggling with clips and sequences of trying to get my VERY average project to encode and export.  I get the dreaded "error compiling Movie.  Unknown error message.  But there are a few details as to where it is tripping when exporting; more on that later.

  Technical details: iMac, 32 GB of ram, Nvidia 780 M 4 GB, SSD from all around.

  First of all, a list of "Things I've tried."  Which many were inspired by multiple threads, I've already read:

  -Make sure there is not still images exceeding the size of my project (1080 p) settings.  Initially, there was one, it has since then been swapped for a completely different image/picture.  Still unresolved.

  -Make sure there is no offset image drop-down conflicts happening between clips and my settings.

  -All images is 1080 p, so there is no scale happening (not with any of the effects either).

  -Switching to export "in/out sequence" export "entire sequence."

  -Created a new sequence, dropped the sequence published in project parameters matched, tried to export from there.  Same question.

  -A tried to make CBR instead of the variable.

  -Tried to use all the rendering engines (software only, CUDA, OpenCL, etc..)

  -At least a few other things too, but it's so darn late now for this reason, and so I'm so tired that I can't remembering everything.  I'll gladly take any suggestions and report back.

  
  

  Now, I mentioned we're listening at a specific point.  I often read that he goes somewhere around 70% through and is approximately the same in my case.  He arrives at a specific clip/couple of clips and blocks in almost the exact same task.  I messed with these clips too many times to count.  Initially it has been remapped both with keyframes, so I changed it to a constant speed without keyframes. nothing.  Had a directional blur on one of the clips, so I completely; and no change.  I think I tried other things with that particular section of the timeline, but as I said, I'm falling asleep here.

  
  

  Please. Help.  I'm very, very, very close to deserting a ship to FCPX total after so many bugs and crashes (it is not the only issue that hinder the project, as many of you know).  Currently, I am a user of dual-app, different applications for projects depending on how how "inside" I need to get, or if I work with different people on different systems.  But I need something that is RELIABLE.  This is supposed to be a professional software and probably priority #1 for professionals is reliability.  At least in FCP almost everything runs very smooth, and I did not yet have a "can't f * ing finish a project" problem with her.

  I'm sorry, please excuse my behavior; I'm frustrated.

  We have progress!

  So, I've discovered some interesting things (maybe not interesting for anyone who has had or has solved this problem before, but new to me).  It is a long summary of what happened, but I want to explain how I came to the conclusion I did:

  First of all, I took advice from Colin and created a new sequence with the troublesome section, removed all the audio clips.  I thought I could try so suggestion of Ann at the same time, so I deleted FilmConvert not only the effects but ALL the effects of the clip.  The settings include: Filmconvert, directional blur (which a clip has the sum of retouching), speed of adjustment (without keyframes), then an adjustment layer with a very small amount of sharpening applied to it.  I did not remove anything from the adjustment layer.  I then exported with only "Export video" checked.  It worked.

  So, I really wanted to try to pin-point, in hopes of helping someone else in the future.  It's when things are interesting.  So I went back and started around, keeping the audio off the coast and little by little the effects removed.  He went down to the directional blur, which I completely spaced the same mention, because I forgot a little on this subject in the middle of all this (sorry about, 100% my fault not to mention blur; some of you could see as the issue immediately, had I mentioned).  With everything, but directional blur applied, it has exported.  I even put the audio tracks to, re-checked Export Audio, and everything worked well.  So the blur effect seems to be the question... or so it seems.  Another interesting thing that's happened is that for one of the first attempts to export without audio, I left the blur effect but take off FilmConvert.  It worked as well.  Finally, my last attempt was to export everything, audio and video and all the effects, however, this time I noticed that on the second clip in the sequence I had accidentally put the blur directional above FilmConvert in the effects Panel (the other clips there like the last effect applied).  So I moved it back to the bottom of the chain of effects.  Of course, it worked.

  Finally, and above all, I tried full export with effects in their place.  SOUL crashed, twice.  Frustrating, but unfortunately enough widespread lately.  However, the project is export straight out of first, first try.  Feeling very relieved.

  I guess my question now is... Why?  Is - this common with all the effects in the first of blur?  To summarize what the section of the clips looked like, it's just a quick moment of time being accelerated x 5, with a slight blur to simulate an exaggerated movement too vague.  Yes, I do usually this kind of effects in After Effects, with more control and better results, but the project is a quick and informal editing, so I don't bother at first.  A big thank you to all who contributed to the discussion, if your suggestion has directly touched the issue or not, it's the community to commit that really matters.  I hope that son like this can get small bugs like these resolved or help someone in a similar situation to learn how works the effect controls panel.  Nevertheless, there is useful information on this topic, for sure.  Thanks again to all who have helped me learn along the way.

• Previous messages does not - iMessage

  I noticed today that for a single contact, if I try to go back in the history of my conversation in iMessage, it will not load the previous messages.  However, and this is where it gets strange... random, it seems that if this person sends me a text, if I'm fast enough and sliding down to the previous loading messages, load them but it stop again.  That said, I don't get the rotation icon showing that it will load more messages.

  I found some interesting things:

  • Time of the message sent from the last post on the page continues to change!
  • My iPad use iMessage also - and even contact is affected on my iPad - just a touch...
  • Can I use spotlight search and retrieve message history/conversation with this contact, but only to the point where I was able to do load the previous messages (example so: I could see a message in the search for more 3 years!)  but I couldn't see it, I could only view the research conversation if I had previously loaded - if really there from a month - it's that I had loaded messages at the time where he randomly gave me of)

  Things I've tried:

  • Hard reset
  • Power off and power on
  • Turn off iMessage and restarts
  • Checked to make sure that I have enough space - I have 63GB available on my iPhone

  I think this is a bug in the iOS 10 but I am hopeful that someone here might know of the issue and how to solve.  Maybe an indexing problem?  I do not know.  Any help would be highly appreciated.

  The devices that I use:

  • iPhone 6 s, iPad 2 Air - both with 10 installed iOS

  Oh, and my is set to keep messages forever, just in case you're wondering.

• Why the image of the logo is not display in Firefox?

  The image of the logo for one of my sites does not appear. The alt image info is displayed. It is a relatively new problem. In older versions of Firefox, the image correctly. As well, the image displayed in browsers, Webkit and IE10. There is a specific problem of Firefox. The main URL for the site is: http://sabaki.aisites.com/dbs323/project/masterAi.php

  If you go to this URL in Firefox, you will see 'image of the logo' spread over two lines and before the text "COTin. If you view the same URL in Chrome or IE10, you will see the image. I have screenshots of the problem, but there is no way to include them here.

  Thank you, shift + reload has worked at the second attempt. Interesting that I had drained the cache many times previously (on the previous days in the last month). Good thing to know.

• accidents of iOS app

  iOs Version 9.3.1

  IPhone 6

  There are some apps on my iPhone that block immediately at startup.  I noticed that this happens mostly with Tubmlr and Timehop, but happened with Outlook and Snapchat from time to time. Honestly, for a while, I thought it's only on the apps that start with a "T".

  When I run the application, it crashes immediately... but the interesting thing is that when I double click on the home, the app button "crashed" present in the multitasking window as if it it launched. If I try to switch to it, it crashes again.

  The only remedy seems to be reset the phone, but invariably it happens again in a few days.  This has happened for a few months, it seems not to be a problem with the applications themselves, more with something in the iOS.

  A reflection as to how this could be repaired?

  I would try to remove the apps, perform a forced reboot and reinstall applications. If the problem persists, I would try a system restore.

  Force restart:

  Hold down the home and Sleep/Wake buttons simultaneously for about 15-20 seconds , until the Apple logo appears. You won't lose anything.

  Restoration:

  First save your device via iTunes. Import your photos on your computer, and then copy all the important data. Reconstruction of the support first test and test. If this does not help, you may need to restore as a new and reconfigure from scratch as the backup may be damaged. It is important to have your photos and your saved data separately from the backup. Here are the steps for a restoration:

  https://support.Apple.com/en-us/HT201252

• Cannot connect when Filevault is enabled

  Has anyone else had the number where they turn off filevault encryption in recovery mode, or they can not connect?

  The question began a few weeks ago, when I started having to turn off the computer and reset the PRAM. It would take to get my built-in keyboard and the trackpad to function has the fast connection after coming out of sleep.

  This same last week the PRAM reset don't would not fix the problem and fortunately the restore mode password reset brought me to disable my filevault encryption. This allowed to connect and enter my office.

  I then went through a few checks of the terminal base to verify the disk errors or file permissions and it come clean.

  I turned then encryption on my HD, and the problem has returned to the login screen.

  I disabled since filevault until I understand what is happening.

  I have noticed that this problem could be related to my use of my MacID software which allows me to use my fingerprint to iPhone reader unlock my MacBook.

  I started using this software at roughly the same time that this problem started occurring. This problem has been noted in the past?

  If so, what are the best solutions to work?

  Same thing here... the question begins to appear a month ago. A case open at Apple... updated the software and even re - install everything from scratch, in the image of failure to factory then re - enable FileVault, the same thing happens again.

  An interesting thing is the keyboard responds in fact every 8 to 10 seconds at the login screen, and you have about half of a second window to enter your password. If you do it slowly and well, you should be able to enter your password and login.

  Bringing in mine at the store for additional troubleshooting.

• Satellite P300 - 1 9 - Pink line on the LCD displays

  After only 18 months of use, a vertical line rose, 1 pixel wide appears on my screen. Connected to an external monitor, the display is fine.
  I read on the net that in such a case, the problem may be cable or screen himself.
  The interesting thing is that generally people get this problem after 18 months or more.

  Is it a manufacturing defect? What should I do to see if the cable or the screen?

  Hello

  > I read on the net that in such a case, the problem may be cable or screen himself.

  From my own experience, I can say that as much as possible is a screen itself.

  > What should I do to see if the cable or the screen?

  If it is still under warranty (I know, 2 years of warranty for computers laptop Toshiba), you should contact the service center and will fix.

• Tecra 8100: memory slot problems

  I have a model tecra 8100 not: PT810L 12 c 42.

  I had problem with slot B mem, so collapsed to use it. Then I upgraded my RAM and inserted a 128 Mb TOSHIBA THLY6416G1FG-80 RAM PC100-222-620 slot A and used for a month. Then he suddenly went dead one day and did not boot at all.

  I took it to the point of service, they found somehow it work by sticking a piece of paper btw Aries and the cover. I used another week with ram cover duck taped it. Same story, then dead in the middle of winXP, switched off and no boot again. It took to the same service point, they tried some other RAM chipsets that it refused to start.

  The interesting thing is; When they inserted a faulty RAM in slot A and non-use slot B we get the message "memory incompatible chipset" on the screen. With the RAM mentioned above in the slot B (problem as always) and the A we get nothing, just a blank screen, DVD slot starts green lit, but nothing.

  WHAT SHOULD I DO, PLS HELP

  What is the RAM causing problems? What must a chipset that is exactly compatible with the model no pls?
  Is it the two locations of memory A or B, their change could solve the problem?

  This is the machine he itself, must it be thrown away?

  ANY SUGGESTIONS PLEASE

  Hello

  I n know where you tried to upgrade the memory but as Lisa suggested this was not a serious technician. I changed and upgraded memory on multiple PCs, and you must use 100% compatible modules! You shouldn't t install the modules with a brute force or use strange things as a communication between the housing and the memory module.
  Possible slots are damage due to use this procedure. But I hope you're a lucky man and everything will work correctly.

  If you n t know which modules are right and taken in charge so you should contact the service partner authorized Toshiba for the right and the upgrade modules.

  Good luck

• Satellite A500-1GL - software cooling question

  Not so long ago, my favorite laptop A500-1GL began to annoy me with overheating. Average temperature of GPU in State of rest was 100? (CPU - 38-40 ° C). When I tried to play the game or to view HD videos, temperature rise up to 105-107 C, then the laptop turns off automatically. The fan speed is not maximum (I know, cause I remember how strong it was months ago, when I played something like second StarCraft), I think it's constantly at 60% of its speed interesting thing, it was that this fan is a not speed up exactly before the emergency stop, your stay in these 60%. Some people talk about BIOS problem. I've updated the BIOS with the latest version. The problem remains. Then I tried to reinstall the Toshiba Power Saving utility. Nothing has worked. But I noticed that when I change the method of cooling, fan speeds up, cool laptop at normal temperature (GPU included) until the moment where the rotation speed is about 60% of the max. Then everything happens from the beginning - fan still at 60%, temperature of the GPU runs at 100 degrees, all bad breed. Looks like software problem.

  I uninstalled Toshiba Power Saver and now there's a thing. When the laptop is turned on, the fan is quiet (very well, as it used to be). If I won't use it application high req., all right. Once, I try to use this kind of applications, up to 70% fan speed (its a little louder than with GST) then it stucks there. The good thing is that the temperature of the GPU is not so high and idle, the bad news, it's now that I can't work with hard long apps - once stuck fan, minutes later GPU temperature causes stop to avoid damage.

  Hello

  have you tried to clean the cooling system?

  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=40

  The virus bad operation/application systems can also make Cpu run high. Not easy to say indeed

• Re: Qosmio F50-126 - freezes when it is on battery

  * everybody *.

  I bought my Qosmio F50-126 it there a few months to 3 years international warranty. There is something about the book that really irritates me-* THE FREEEZEE *.

  I noticed that when I watch a video on any player and any format, the computer all freeezess * for 1 or 3 seconds and takes * one * but the interesting thing is that it occurs when running on battery *. He runns like a dream when running on the sector with the battery charge. * IL UNBELIEVABLY boring *.

  When your in the movie and the lights are turned off and your in your bed hot comfly. The ENTIRE computer freezes with audio hopping. This happens only for 1 or 2 seconds but it occurance is * RANDOM.* COMPLETELY if the laptop is in the mood to watch the movie it freezes only 2 or 3 times, but sometimes he just get on my nerve.
  I disabled my kaspersky and other runing random process. Please help me!

  * Only for the note: happens that freezing only happens when running on battery *. This help Oh-hope

  I found that my HARD drive on the laptop light don't which often flashes when on battery and the playback of the video so it's not load time the reason... also... SAME RESULT WHEN I LAUNCHED THE HIGH PERFORMACE, BALANCED or power saver - actually powersaver is * _the WORST... Good bye... PLESE HELP ME OR MY LIFE IS DOOM_ *.

  Hello

  I have never heard of this issue and I must say that my Qosmio F50 really works great without any problem.

  It's not easy to say what is the reason, but you use the factory settings or you have installed your own version of Windows? Normally with preinstalled Windows should work without any problems.
  In addition, it would be interesting to know if you have installed a display driver not Toshiba. These drivers can overheat the system and damage the graphics card so make sure you use the display on the site of Toshiba driver.

  Last but not least, you should check the mode of cooling on battery mode. Maybe you don t have a maximum cooling on battery and overheating of laptop mode. You can resolve this problem if you clean the laptop using a jet of compressed air and always the value of the maximum cooling performance.

  Good bye

• Satellite U400 - error - Bluetooth is not started

  I used my u400 3 months without problem...
  Then all of a sudden happened several problems with bluetooth...

  When I tried to use BT for example OBEX, I got the error msg: "Bluetooth has not begun."
  I tried to reinstall the driver for bt, but I couldn't. I got this error msg: 'Please insert the battery BT '. So I decided to reinstall windows vista with the recovery disk. On the new installation of vista, there is no pre-installed bt driver. So I installed the drivers and everything was going well for 2 days...

  Now, bluetooth does not work still... can NOT reinstall drivers becouse of error msg once again (Please insert battery in LV) (of course, the wifi switch is on)... The interesting thing is that in device manager is no BT hardware...

  Any ideas?

  Hey Buddy

  I have a U400 too and I never had problems with BT
  I updated the BIOS to the latest state
  Did you do that too?

  Otherwise you can try to update the BIOS
  Also I recommend that you enable the BT using the FN + F8 key combination
  Using this button, you can turn on and off Bluetooth and WLan

  Check it!

• Unable to see a wifi network with Atheros 5005 g wireless network card

  Hi, new to this.

  I tried Hnatyshyn best part of a month for my Equium M50 PSM59E to see a wifi network that broadcasts on 13(unlucky for some) channel.

  I can't screen authetication for network WPA - PSK on the wireless network settings. The wireless network card is the Atheros 5005 G with the latest version of the driver downloaded from Toshiba and KB893357 Knowledge Base.

  The network is visible in this computer with a plug in DLink DWLG650 +, how the Atheros to work?
  Soon Alex

  Hello

  are the two of you using Configfree? And the most interesting thing would be: what system are you using?

  Otherwise I can give you a link to another thread where you can probably find a few info´s on the configuration of wireless network:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=26088&MessageID=95706𗗚

  I suggest all of you to google around a bit. Most of the questions are either here in the forum in the section wireless or on some Internet sites that can be found with the help of google.

  Cheeers