12 Pro Linux on Fedora 24 Workstation

Similar Questions

• Publish a 11 SUSE Enterprise Linux VM created in workstation 7 ESX 3.5

  Hello

  I created a SUSE Enterprise 11 VM Workstation 7, and now that I have to work properly, I would like to publish to our

  Cluster ESX 3.5.  However, I'm running problems. I use the VMware Converter v 4.0.2 for Vi Client plugin.

  When I try to import the virtual machine I get an error "cannot determine the guest operating system: in the GUI, the logs on the server vCenter Server:

  Creating local map...

  Registration disposable session object Id = VmiQuerySourceInfoTask::task the associated disposable session object id = VmiQuerySourceInfoTask::task with the session id = F7C8BAEC-FF65-4363-B304-C9E09AA670E4

  VmiQuerySourceInfoTask::task: start of the execution of a task of image processing VmiQuerySourceInfoTask::task: SetState at race

  VmiQuerySourceInfoTask initialized

  Connection to
  leviathan\isos\publish me\SUSE\: Ryan

  Connection isos\publish me\SUSE\ on Leviathan as leviathan\Ryan

  Manager of SMB: to share connection error : 1203

  Unable to connect to isos\publish me\SUSE\ on the Leviathan. Reason: Error unspecified in the mechanism of the remote execution

  File connection sharing failed - could be due to an invalid network path

  Connection to
  leviathan\isos: Ryan

  Connection to isos on Leviathan as leviathan\Ryan

  Connected successfully to the isos on Leviathan

  Creating local map...

  Connection to
  leviathan\isos\publish me\SUSE\SUSE Linux Enterprise 11. VMX: Ryan

  Connection isos\publish me\SUSE\SUSE Linux Enterprise 11. vmx on Leviathan as leviathan\Ryan

  Manager of SMB: connection error to share http://\\leviathan\isos\publish me\SUSE\SUSE Linux Enterprise 11 vmx: 1203

  Unable to connect to isos\publish me\SUSE\SUSE Linux Enterprise 11. vmx on Leviathan. Reason: Error unspecified in the mechanism of the remote execution

  File connection sharing failed - could be due to an invalid network path

  Connection to
  leviathan\isos: Ryan

  Connection to isos on Leviathan as leviathan\Ryan

  Connected successfully to the isos on Leviathan

  Parsing local vmx file
  leviathan\isos\publish me\SUSE\SUSE Linux Enterprise 11. VMX

  Cannot read the news of the OS on the system disk: vmodl.fault.SystemError

  VmiQuerySourceInfoTask::task: task of Image processing failed with MethodFault::Exception: sysimage.fault.UnableToDetermineGuestOs VmiQuerySourceInfoTask::task: SetState error

  deleted explicitly object: VmiQuerySourceInfoTask::task VmiQuerySourceInfoTask::task destroyed

  I think the answer is that you cannot import SUSE 11 VM to ESX 3.5 but I hope that this is NOT the case that I really really really need this virtual machine published in our ESX infrastructure. If this method will not work is there other options?

  Do not use the plugin.  It does not yet support Linux.  Although this error may occur, the import process should work again as the previous system was a virtual machine.

  If you are using the standalone version, treat the source like other / workstation, point to the VMX.  You can get an error, that's fine.  It must still allow you to process the import of ESX.

  Last solution... Turn on the virtual machine and use the stand-alone converter to target IP address of the SUSE operating system inside the guest.  It treats like physics (step 1) and imports to ESX as usual.

  Kind regards

  Jonathan

  B.SC., RHCT, VMware vExpert 2009

  NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.

• 11 Linux workstation cannot start the VM because/dev/vmmon error

  When you start a virtual machine in VMware Workstation 11 for Fedora 21 I receive the following errors:

  • Unable to open/dev/vmmon: no such file or directory. Please ensure that the "vmmon" kernel module is loaded.
  • Could not initialize the surveillance apparatus.

  I use Fedora 21 Workstation, the kernel Linux K45AF 3.18.8 - 201.fc21.x86_64.

  Please let me know if anyone has any information regarding this issue.

  It is a known problem, please try the KB: http://kb.vmware.com/kb/2107267,

• Firefox save the header and Page layout in Linux Fedora

  Does anyone know how to record continuously the layout in Firefox under Linux (IE, Fedora)?

  In Windows, it's easy to do, under file, Page Setup, margins and header, then you can change it and click OK and he remembers this setting.

  However, on Linux, you must go to Options, file, print, and then change there, but there is no Save or OK button, so it does that to a print job and you will have to change each time.

  We must stop definitely Firefox under Linux to print anything in the header, especially the URL.

  This has happened

  Each time Firefox opened

  Always

  User Agent

  Mozilla/5.0 (Windows; U; Windows NT 5.1; Chrome/4.1.249.1064 en-US) AppleWebKit/532,5 (KHTML, like Gecko) Safari/532,5

  See if it works for you - worked for me on Ubuntu 10.04:
  Type of topic: config in the URL bar and press ENTER.
  If you see the warning, you can confirm that you want to access this page.

  Put the header in the filter line and right click each of these three preferences one at a time. Select Edit and clear this code so that the box is empty - then click OK.

• Kickstart: linux + vmware workstation 8?

  Hello!

  Im getting a kickstart for Linux guests with vmware workstation 8.

  is there a howto or whoever did this?

  concerning

  Lars

  I'm not immeaditally aware of anyone doing this.  I guess you are using a Red Hat based for this distribution?  If so, you will want to install the development tools (the kernel headers and gcc and friends).  Installation of WS should be done some time in the section cusomization of scripts of the kickstart file.  If RIP you in the installer of WS, you will find the flags that will reduce the amount of questions asked (and if you dig enough deep to eliminate questions).  Start the installer of linux WS help section to find the minimum set of afroementioned of the flag of questions.  I would like to know how it goes... looks like fun

• Dual boot with Windows 7 and LINUX - Tecra A11 (PTSE1A - 005-00L)

  Hello

  I bought a new Tecra A11 computer laptop running WIN7 Pro. I want to install LINUX also. This means that I want to run my laptop in dual boot Win7 Pro/LINUX (a Distributor). Please tell me how to do this.

  There are 5 partitions on the HARD disk:
  1 active, recovery partiton 1.46 GB (without drive letter)
  2. principal asset C: start 145,04 GB (NTFS)
  3. active logics E: 78,13 GB (NTFS)
  4 active logical F: 64.25 GB (NTFS)
  5 primary Partition 9.2 GB (no drive letter, the unknown application)

  Hey, I need because I was admitted to a course of RHCE (Red Hat Certified Engineer)

  Please help me

  Hello

  I can't give you a step by step explanation, but most distributions offer today a possibility to coexist with Windows.
  When installing the unused free space will be taken by Linux (with the consent of the user of course!)

  What exact configuration you need is impossible for someone else to say, but I would say to make the space occupied by the F player available for Linux.
  You seem to have of enough space for Windows and Linux operating system doesn't have much.

  Some thoughts about setting up your score:

  I touch NOT 1,2 and 5 no matter what. They are your system and a system of internal partitions (recovery and data environment) and wouldn't it be fun to lose.

  1 active, recovery partiton 1.46 GB (without drive letter)
  2. principal asset C: start 145,04 GB (NTFS)
  3. active logics E: 78,13 GB (NTFS)
  4 active logical F: 64.25 GB (NTFS)
  5 primary Partition 9.2 GB (no drive letter, the unknown application)

  Then choose a Distro (Ubuntu, Mint, Fedora and OpenSuse - suggestion Fedora will be as close as possible associated with RedHat) that will guide you in the steps to allocate space for Linux.
  I suggest however to remove the disk F in Windows for Linux does not start from resizing all partitions.
  I do not know which works perfectly, but will just take time, and will most probably remain pretty useless drive F.

  If you have valuable data on your device, make sure to save! No software comes with warranty :)
  Last but not least - make 100% sure to create a collection set using the Toshiba Recovery Media Creator before you start the installation of Linux.
  If something goes wrong you have the opportunity to put the unit in factory condition.

  Good luck and keep asking you if you need extra help!

  Tom

• Fusion Pro 8 NAT on the private network does not

  Or, at least, I can't make it work!

  Created a new private network and checked the two external NAT and connect Mac boxes (DHCP disabled after you assign the IPv6 network range offshore).

  Has actually tried to get a cluster of Nutanix nested in to resolve DNS queries via 8.8.8.8, but failed to reach the external network.

  So I created a vanilla Win 7 VM on the same network to test, and this, too, is able to ping the GW (10.0.0.1) very well, but can not get to 8.8.8.8 (or elsewhere).

  I'm doing something wrong? Is this a known issue? Are there workarounds?

  Ta!

  YOlnk,

  I got exactly the same problem, used the Fusion Pro 8, used a linux guest. Could ping 10.0.0.1 very well.

  I was glad to see you post, because I was convinced that I was doing something stupid.

  It turns out that, in a way documented extremely bad / undocumented that the default "Nat router" gateway is 10.0.0.2!

  So, for any subnet private that you create, the adresse.2 is what you want to use for the default gateway. The adresse.1 is to access the host.

  I came across this documentation for Wmware workstation but it seems to be relevant for Fusion Pro too.

  VMware Workstation Documentation Center

  See you soon

  SoC

• How to change the virtual IP addresses in 6.5.1 on the Linux host?

  I am running Workstation 6.5.1 on a 64-bit Linux host (Fedora 10).

  The application of "Virtual Network Editor" is distinguished by its equivalent in Windows.  It is quite reduced in functionality.

  What I need is a way to change the virtual IP addresses.  In the editor, I can only change the overall range of subnet (network address and the sous-masque).  It works very well.  However, I can not change the individual IP addresses in there.

  In particular, I need to change:

  .1 = the host itself

  .2 = services internal VMware (server proxy DNS, router, gateway, NAT, DHCP etc.)

  How can I assign these on Linux?  Pour.2, I saw the "nat.conf" file in the directory/etc/vmware, under the number of the device (in my case vmnet8) vmnet.   Pour.1, I've seen this in a number of places, the DHCP server, and others.  Where does get this information from VMware?  What I don't want is to have to change this IP address in many places, because it will become easy to get out of sync.

  If I just use "ifconfig" to change the IP address, it is an approach of brute force that works, but of course it will not survive a reboot.

  Traditional networks of the host Linux tools are unaware of the vmnet addresses.  Somewhere, they are configured with VMware, not the distribution of the host.  So, I wonder where it is.

  Thank you!

  Josh

  Josh,

  Here is what I do on my VMWare Wks 6.5.2:

  Files to edit:

  1 /etc/vmware/vmnetx/dhcpd/dhcpd.conf

  Change the following:

  (a) range

  (b) option domain-name-servers {10.10.10.254}

  (c) {10.10.10.254} option routers

  2 /etc/vmware/vmnetx/nat/nat.conf

  Change the following:

  (a) {10.10.10.254} ip - address of the NAT gateway.

  3 /etc/init.d/vmware script

  (a) check a function called vmwarestartvmnet()

  (b) after the/vmware-networks - the beginning of the line, add:

  ifconfig vmnetx xxx.xxx.xxx.xxx {ip host address we want to}-> vmnet1 ifconfig 10.10.10.253

  This works perfectly for me. The only thing is that, once you change these files, make sure that you get a copy of them. Otherwise after any update or configuration change who will be overwritten.

  I hope that VMWare will come with a better way to do that instead of hacking these files manually.

  HTH,

  -Daniel.

• All new Yoga 2 Pro 13 order to ship through the yellow color correction pre-installed?

  I am excited about buying this machine as soon as POSSIBLE, but this problem is important to me. I wonder if I have to install the fix myself, or new commands should work out of the box.

  It is also mandatory for me that it will work with GNU + Linux like Fedora, Debian and Ubuntu distributions. If yellow color correction out of the box, I need to know that once the fix is applied, it will take during the upgrade of a free operating system.

  Yes, thank you!

  I also called lenovo and they said that the new deliveries would come with the pre-installed fix

• Impossible to install linux on my computer hp laptop G62 - a36SO

  Hello

  I tried to get linux on my laptop working for the last days... Installation of the operating system is fine and he invites me to install the driver, owner of ATI Mobility for linux as my laptop has ATI mobility radeon 5xxx video chip...

  Even this succeeds, but when I restart the system to complete the installation, I get an empty on the start-up screen and no response from the system here after...

  I have been involved in every linux forum to find the cause of this problem and have also tried to install all kinds of flavors of linux like fedora, ubuntu, debian... without exploitation.

  I even tried to install older version of ubuntu and even that did not work...

  I also tried the driver settings listed in many forums and those forces work either...

  And now I really regret why I chose to buy this hp laptop...

  Can someone help me pls with this question...

  Thank you!! "

  You must load first in the system.

  1: load the live CD of linux and as root edit /etc/X11/xorg.conf

  2: change of ATI driver or anything like that to "vesa" in the Device section

  3: reboot and now it should work in low resolution

  4: Try this: http://support.amd.com/us/gpudownload/linux/Pages/radeon_linux.aspx

  Don't install the drivers of 'Pilot' to install those owners

  5: Try linux Mint instead of Ubuntu

• Acer Aspire S7-391-6810 works under Linux (Ubuntu, say)?

  Also, if I install Linux instead of Win8, my warranty will be void?

  Thank you!

  Nice day

  Linux (Ubuntu, Fedora, etc.) will run on S7-391-6810, HOWEVER, the only problem you will encounter is the drivers and applications on your computer that drivers are only available for the Windows platform.

  Regarding the warranty, Acer does not care what you load on the machine, as they cover the software warranty. They cover only the pure component on hardware failure... which means that only produce material defect is covered.

• "Failure of the application. "HR = 0 x 80040101: failed to initialize the virtual machine ' on Workstation TechPreview 07/2015 with Windows 10 x 64 final

  Hello

  I just did a new install of Windows 10 (x 64) on my Surface Pro. Then I installed Workstation 11.1.2. Installation went well. But when starting, I get the error message of the headline.

  Same thing with Workstation TechPreview 07/2015, vSphere Client 6.0 and Remote Console. Seems to be a general problem, access the console of the virtual machines remotely.

  No work around known yet? I can't connect to any virtual computer right now.

  See you soon,.

  -Carsten

  Hi Carsten,

  I have the same problem when I connected with an AD azure account. If I have connection locally without problem.

  What is the scenerio you face?

  Kind regards.

• VMware workstation 11 and Windows 10 build 9926 auto resizing does not

  Host: Windows 8.1 Pro x 64

  VMware: Workstation 11

  Client: Windows 10 Build 9926

  Problem I have is in the guest operating system (win 10).  I can not auto resize the guest to fit the window (now Vmware worksation, opinion, comments made.  It flashes on the full screen, then goes back to the resolution that it is.  I'm stuck at the Windows gives me resolutions.

  I know that this version comes out today.  But I thought I'd give you guys a heads up.

  THX.

  Build 10074 works!

  So, I did a clean install of the new generation (10074).  Workstation makes easy installation on it.  During the easy setup process, it didn't install VMWare tools, but I see the tools have been installed.  I tried to re-size that the screen with 3D powered acceleration; and it worked!

  This issue is finally resolved. !

• Fedora slow 21-stop (2 minutes) and crashes when you connect

  Fresh installation of Fedora 11 workstation in my computer 11 using pretty much computer settings default virtual (4 cores, 8 Gig ram, 50 gigs HD) stored on SSD. Closing (init 6) gives the appearance of hanging, but 2 minutes later it begins happily again. It also start directly at the exit of the Live CD.

  However, to launch the live CD in virtualbox, it disconnects correctly and shutsdown almost instantly.

  Welcome to the Windows 7 64 bit computer.

  Any help appreciated.

  Took me 3 months, but I found a solution and it stops immediately and properly disconnects.

  It is in this link:

  Re: Still crashes Fedora 21 / slow to start and stop

  Otherwise, it is interesting to note that you can press CTRL-ALT-F2 to the console text, connection and init 6 or init 0 work almost instantly as well.

• 8 workstation

  Hello guys,.

  I'm new to Vmware and I have installed workstation 8, wonder what version of linux came with the workstation 8?

  Can someone help me?

  Thank you very much

  Buraq

  
  

  Welcome to the community,

  VMware is not delivered operating systems with their products, it simply provides a - VMS - platform on which you can install. You will need to get the images of installation for the guest OS the same way as you would for physical systems.

  André