VMware workstation 11 and Windows 10 build 9926 auto resizing does not
Host: Windows 8.1 Pro x 64
VMware: Workstation 11
Client: Windows 10 Build 9926
Problem I have is in the guest operating system (win 10). I can not auto resize the guest to fit the window (now Vmware worksation, opinion, comments made. It flashes on the full screen, then goes back to the resolution that it is. I'm stuck at the Windows gives me resolutions.
I know that this version comes out today. But I thought I'd give you guys a heads up.
THX.
Build 10074 works!
So, I did a clean install of the new generation (10074). Workstation makes easy installation on it. During the easy setup process, it didn't install VMWare tools, but I see the tools have been installed. I tried to re-size that the screen with 3D powered acceleration; and it worked!
This issue is finally resolved. !
Tags: VMware
Similar Questions
-
VMWare Workstation on Windows Drag and Drop 8.1 10.0.1 does not
I use VMWare Workstation10.0.1 on a host Windows 8.1 and a guest on Windows Server 2008 R2. Drag / move does not seam to work between the guest and the host. Copy / paste work, just not drag and drop. Drag / drop "Not" work with a Windows 7 guest.
I checked and tried the following:
- Drag and Drop is enabled under Guest insulation.
- I tried re - install the VMWare tools and am sure that they are running.
- I launched VMWare Workstation "as Administrator".
- I'm using a simple file created in Notepad.
I just buy VMWare Worksation 33 days, so I'm 3 days on the support.
Any ideas?
Thanks in advance.
RedBaaron wrote: I tried re - install the VMWare tools and am sure that they are running.
Did you uninstall completely, not to do a repair and then re-install VMware tools?
-
VMware workstation 8 and visualization
Hi all
I just downloaded the trail for vmware workstation 8 and wanted to try the option of viewing with one of my virtual machines created. I read that now, this option is only for modern processor. my processor is an Intel Core 2 Quad Q6600 which has the set of instructions VT - x visualisation. When I enable the option for my virtual machine I get the following error message "Virtualized Intel VT-x/EPT requires the support of Intel VT-x/EPT platform" I have this option enabled in my BIOS and have one of the most up-to-date versions of the BIOS for my motherboard.
It of just my CPU not supported by vmware or is there some kind in order to get this to work with my setup?
Thank you
My computer specs:
Windows 7 pro SP1
Intel Core 2 Quad [email protected]
4 GB of ram
1 TB HARD DRIVE
GeForce 8800 GTX 512 MB
The Core 2 processors have no support of EFA. It takes EPT to virtualize VT - x.
-
Windows Vista Build 6002, this copy is not genuine
I just update Quicktime and another, something to do with the overvoice for iPod (which I uninstalled it after I restarted my computer). He said now in the lower right of my screen
Windows Vista Build 6002, this copy is not genuine... also, after updatingand restarting my computer, I get a bubble telling me to activate windows
Help
AAARGH! :)
Has no task you!
For some reason, the operating system cannot correctly read the BIOS SLIC table that is required for automatic activation key OEM_SLP used here.
You must change the key to that on the link change the sticker COA product key using ghte on the system properties page.
You may need to activate by phone.
(This is another of your rescue machines?)
-
Windows Vista crashes and displays a screen saying "the program does not.
original title: crashing Vista
Hello
My Vista PC crashes. I think it has something to do with the screen saver, memory, HARD drive or energy economy. The accident appears as frozen screen and sometimes the program says State "program does not. I have tried different tricks like turning off screen saver, change the setting for power, HARD drive always 'on '... But no changes have so far resolved the issues.
I was not able to identify a single application or function as the source of my problems...
My Vista works very well, but if a leave as the computer and screen saver starts or the computer screen will energy efficient, it will crash when I "wake up".
I've updated the system and all the applications and drivers, but the system is still unstable and cannot be left for an extended period of time before this crash. As long as I'm working on the PC all works. If I leave my PC, I have to turn it off.
H. Hansson
Hello
Did you change your computer?
Method 1:
Step 1:
I suggest you check in safe mode.
Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
Step 2:
If you are able to start your computer in safe mode, I suggest you perform the clean boot and check.
Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
To set up the computer in a clean boot, follow the steps in the link: How to perform a clean boot
http://support.Microsoft.com/kb/929135
Note: After checking in the clean boot, follow step: 7 article to reset your computer to normal startup.
Method 2:
I suggest you to see the link and check out the program does not.
What does it mean when a program is not responding?
http://Windows.Microsoft.com/en-us/Windows-Vista/what-does-it-mean-when-a-program-is-not-responding
Method 3:
I suggest to download and install the Microsoft safety scanner and run the scan and check.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
See also:
Ways to improve your computer's performance
http://Windows.Microsoft.com/en-us/Windows-Vista/ways-to-improve-your-computers-performance
Optimize Windows Vista for better performance
http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance
-
I'm trying to get my spell checker in Windows Vista to work, but it does not check my work. I put several spelled words and it always gives me a "Spell Check Complete" message
It can cause that. Their our dew case, where you can smell bad words and spell check don't pick them up. It wood help if their was also a check for two grammar...
Just an example... :-) Mike Hall MVP - Windows Desktop Experience http://msmvps.com/blogs/mikehall/
-
Windows media player will show it's extraction and burning, but then the burned cd does not play? Used to work properly, then a few days ago decided not to make a playable copy.
Your setting got changed if you don't burn it as audio. This is the setting you need to change...
Click the dropdown arrow in the "burn" pane and select "audio disc" and you should be ok again. R
(You will need to start over with a fresh blank disc).
-
After the upgrade yesterday from Vista to Windows 7, now my Cisco VPN does not work and I get an error message titled: grounds 440 driver fault. Any ideas to fix this?
This was the solution! The works of vpn as $ 1 million now. I followed the instructions above to enter the uninstall program and selecting the repair option. I rebooted the machine, then used the troubleshooting on vpn software compatibility option. Selected Windows windows xp (service pack 2) as the correct software and cisco vpn client started right up.
Thanks, Nick!
Rick
-
I keep on getting error 0x6D9 and 0 x 80070424 code when you try to activate my windows firewall, also my mcafee firewall does not work. I have Windows 7 and it started only caused since last week. Can someone give me an idea on how to solve this problem?
When you have McAfee running, he provided the Firewall & automatically deleted the Windows Firewall. Panel\Windows Firewall control page should have shown a message say. If you managed to change the settings for the Windows Firewall then you might have corrupted both the McAfee & Windows Firewall.
I really think you should try a restore for some time point before you tried modifications, if that is even possible.
If you have uninstalled McAfee Control Panel, programs, then you must also run the Tool McAfee Consumer Product Removal or you will get several unpredictable problems.
If you still have problems after running the McAfee tool then it could be the result of the previous Windows Firewall changes & the corruption of the system resulting. Your system is in an unknown state as a result of these changes.
You can try running SFC/scannow in an admin command prompt, but it wouldn't do any good.
You may need to use the installation DVD to do a repair installation. I hope get you lucky, but you may need to do a complete reinstall of Windows.
-
I installed windows 7 and now my canoscan lide 50 scanner does not work.
I installed windows 7 and now my canoscan lide 50 scanner does not work. Anyone know if it will be a windows 7 update driver to resolve this problem? If this is not the case, what scanner in the price of $80 will work on windows 7?
Here is the solution for the LiDE 50...
-
Just upgraded to Windows 7 and my Dell All IN One Printer does not print. It is said that the pilot of the AIO 942 not found.
Anyone where I can download this driver?
There are only drivers for Vista at http://www.dell.com/support/drivers/us/en/04/DriverDetails/DriverFileFormats?c=us&s=bsd&cs=04&l=en&DriverId=R151559.
They are supposed to work if installed in compatibility mode. http://en.community.dell.com/support-forums/peripherals/f/3528/t/19319527.aspx.
-
I updated to Windows 10 and then back to Windows 7. Now Adobe Reader does not work. He said: I'm missing acroread.msi. I tried to uninstall the program, so I could re - install, but it will not uninstall either lack of acroread.msi. Can anyone help? I tried all the troubleshooting steps that I could find in the forums and online without success.
I managed to fix it. I found the Mr. Fix It tool on the Microsoft Web site and who was running, and it worked. He fixed the corrupted registry file and allowed me to install the player. I had tried it once before, but it has not been successful. This time, it worked.
-
Need to stop Windows 10 message when connecting. Does not occur with IE
When I was able to connect Firefox I have a big blue sign that fades to logon and want to register for Windows 10. Quite boring.
Does not appear in the Internet Explorer Logon. I had already download Windows 10 but decided not to move. I deleted the KB3035583 update and that was supposed to help. Changed message to logon to Windows 10Homepage changed www.msn and the display did not come to the top on connect. I still like to use msn as homepage, but that will just live with it until he goes or use IE when I don't want to delete it... Thanks for the quick response.
-
I installed Windows XP on my new computer (with Windows 7 PRO), but my USB does not work on Windows XP. It works fine on Windows 7.
Hello
And much more: (XP mode requires professional, Ultimate or Enterprise).
Get all the benefits of Windows 7 and continue to take advantage of your investments and more
business and productivity programs that require a PC running Windows XP.Note: Windows XP Mode requires a download.
http://www.Microsoft.com/Windows/Windows-7/features/Windows-XP-mode.aspxWindows XP mode
http://www.Microsoft.com/Windows/Virtual-PC/Download.aspxWindows XP Mode is supported through Technet
TechNet - Forums - Windows 7 virtualization
http://social.technet.Microsoft.com/forums/en/w7itprovirt/threadsI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
When I press email and attach the photo, my email 'box' does not appear as formerly, and still on the bottom of the screen it says "1 selected item." And I also waited for a period of time as well very reasonable. What can I do?
original title: EMAILING A PHOTO OF "LIBRARIES/IMAGES".Hi BrianS.OR,
1 are you referring to the client program webmail or email?
2. what e-mail on the computer client program do you use? Is - this Windows Mail or Windows Live Mail?
3. What size are the image files?
4. did you of recent changes on the system?
You can temporarily disable a security software and firewall installed on the system and check if the problem persists.
Note: Be sure to enable the security software on the computer after checking.
Hope this information is useful.
Maybe you are looking for
-
Re: Problem of recovery with Satellite L500D - 16 M: does not load Win7
I recently put the recovery disk in my Satellite L500D - 16 M laptop to factory settings.It restarts without problem until it gets to the windows page 7 and prepare to start first use but it keeps looping back and restart. What can I do?
-
Upgrade memory Presario M2401XT
I have a Presario M2401XT with 256 MB installed. Can I replace the only card of 256 MB with a single 1 GB card? I think that there are two slots. I have to update the BIOS?
-
I have a c6180 sometimes I switch off at night using power button. Normally it turns on fine. Today, I got the message that I need to use power button and not disconnect or turn off band (which I never do). The machine guard re-boot during the sta
-
How to use the search to find the file that contains specific text?
In VBA, I use the following statement to access the indicated procedure:Public Declare Function QueryPerformanceFrequency Lib "kernel32" _(ByRef freq As Currency) As long So I guess that the string "QueryPerformanceFrequency" exist in the c:\windows\
-
HP laserjet 1320: PRNTER IS NOT PRINTED AND ITS CRIMINAL IS OFF
Hello I have HP laserJet 1320 printer, before its usb connector seems to be mulfunction, I replced the trainer, he began working again, but after a few days failed to print and its criminal turned off, put except when I turn on does not start immedia