1242 AP WGB can be associated with mesh LAP 1522 5 GHz?

Similar Questions

• Is there that a limit on how many NICs can be associated with a group of ports?

  So, I have a large box with two onboards and two quad ethernet cards.

  Vswitch0

  port groups

  Service console - vmnic6 vmnic5

  kmkernel - vmnic5, vmnic6

  Vswitch1

  port groups

  VMotion - vmnic4, vmnic0

  Vswitch2

  port groups

  external - vmnic2, vmnic3, vmnic8, vmnic9, vmnic1, vmnic7

  The problem we had was when we grew up the server on the net and took it out of the way now, we noticed servers you access, but not ping. So, we watched the distrabution of ip dhcp and noticed that vmnic1 and vmnic7 did not have an assigned ip address range as the others did.

  So is there a limit vnic for grouping of network cards in a port group?

  Shane

  Welcoem to the Forums - according to the rate maximum config - http://www.vmware.com/pdf/vi3_35/esx_3/r35u2/vi3_35_25_u2_config_max.pdf - number maximum fo physical NIC by vswitch are 32 - ip addresses, you're seein' are discovered by the esx on the physical port, these vmnic connect to.

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• MCBUILDER. EXE running rampant, competing with updates for CPU and possibly associated with an update failed chess SP2 and the backup and restore

  Running Vista Home Premium SP1 and the system has been slow and freezing. MCbuilder appear to be using 50 to 100% of CPU, and it is a process that seems no way of killing. I disabled in Services, but again, it seems to start without any particular reason and hinders attempts to install programs or updates vista hogging resources. This can be associated with a problem that has arisen since June because I am not able to perform backups or set restore points (gives the error "0 x 81000101 the creation of a shadow copy has timed out"). I tried to install SP2 in the hope that it will not solve the problem, but the failure of installation and install KB947821 doesn't seem to work either. As the restoration of the system is defective, I would be grateful for the pointers to the resolve or completely remove this mcbuilder problem.

  You have COMODO or AVG Antii-virus installed on your system?  It is known problems with these two programs and MCbuilder.exe.  I don't have Microsoft Resource Builder Cache as a service in the Services (so I can't activate or deactivate it)-you which version of Vista to help (bit, SP-number version)?  I have 32 bit Vista Business SP2. I see no way to turn it off in order to close it with the Task Manager when it is - with the exception, but who could become annoying if it happens frequently and with multiple instances.  I could find nothing useful in Knowledge Base Microsoft on it hogging resources although I've seen a few threads using Bing (which is where I came up with COMODO and AVG anti-virus conflicts).

  You can be infected by malware (which may be the origin of the program to activate and run "without reason"). While in Test Mode safe mode (press F8 during startup and select mode safe mode with networking repeatedly) to run anti-malware programs. To resolve this problem (if it is a problem) download, install, and run the following two programs: http://www.malwarebytes.org/mbam.php and http://www.safer-networking.org/en/index.html.  You can also try a free trial of Pandasoft (www.pandasoft.com).  Before you download pandasoft, uninstall all anti-virus program you currently use (because the installation and execution of two simultaneously can cause conflicts, freezes and all sorts of problems).  Once you have uninstalled your current AV program, download, install, update and scan using Pandasoft.  I think you might be amazed at how much she notes that other software missed.  Once complete, uninstall pandasoft and re - install your current AV program (unless you decide to spend that I did when I tried about 4 years ago).  You can also try the new, free Microsoft Security Essentials http://www.microsoft.com/security_essentials/default.aspx (with the same caveat that only program AV one ALONE can be installed and running on your system at any time). Restart after finishing all the scans and see if the problem has been resolved.

  Try a system restore to a point in time BEFORE the problem started (which can be a problem if it began all the way back in June - you should have posted here then when this process would probably have worked).  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points (but I doubt that you will have a pretty far back and forth to the system restore may not be a viable option).  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

  If the system restore does not work, do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If this does not work, try to start in safe mode (repeatedly hit F8 key so that the start and go in safe mode with networking).  Then we will check some of your system files:

  Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well it will complete with no corruption, he couldn't fix it (if there is such corrouption post here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.  I bet there is something involving the program or associated with this program.

  If this does not work, you will need to do a repair/system upgrade using the Windows Vista Installation disc authentic (you own or that you can borrow from someone).  Here is the procedure: http://www.vistax64.com/tutorials/88236-repair-install-vista.html as well as the upgrade from an earlier version of the Windows section of the following: http://support.microsoft.com/kb/918884.  Although this will not affect your data, settings or programs, you should always back up your data before you start just be on the safe side.

  I hope one of these procedures can solve your problem (probably the SFC command or controls anti-virus).  If this isn't the case, after return and we will try something else.  Return message anyway so we know how it turns out.

  BTW, for update of the problems you are having with SP2, post on the Forum of Windows Update to: http://social.answers.microsoft.com/Forums/en-US/vistawu/threads where the people who specialize in update issues will be happy to help you with your concerns and get SP2 running on your system (perhaps despite this particular problem).  As you say, it can even solve the problem - who knows.

  Good luck!
  Lorien - a - MCSE/MCSA/network + / A +.

• "The file... is associated with another photo in the catalog" problem

  I have about 300 000 images stored on a disk in Drobo. Due to a hardware problem with the Drobo itself, I had get a new Drobo. I placed my old drives inside the new unit and everything appeared fine in the Finder. But in LR, everything happens with the "...". the original file is not found. "When I try to locate and correct the association I get, 'the file... is associated with another photo in the catalog. Each file can be associated with a picture. "There are not many copies. How can I solve this problem? Thank you.

  Are the files in the same place exactly as they were before your accident of drobo? i.e. the volume is a not the structure exact same name and folder? If Yes, you shouldn't have to re-associate the files and you should be able to double-click on an image and Lightroom it true already knows where is the image. If it isn't, you may need to stop Lightroom, disassemble the drive and reassemble and then open Lightroom again. I saw Lightroom being very slow to recognize the disk he thought no was not available was in fact already mounted.

• How can I show what bssid a user is associated with the CLI on 1242 Cisco ap?

  How can I show what bssid a user is associated with the CLI on 1242 Cisco ap?

  SH associated dot11

• How I can corect the following protocols (rtsp) is not associated with any program or is not allowed in this context

  The address was not included

  Firefox doesn't know how to open this address, because one of the following protocols (rtsp) is not associated with any program or is not allowed in this context.

     You might need to install other software to open this address.
  

  I'm not a Curmudgeon, so please keep it simple.

  Thank you

  Firefox 32.0.3 has this security update.
  You can check the version in "> about".

• How I can do it then when I delete a project, it will remove videos associated with the project.

  Hello

  I recenty used my 1 TB of storage on my Macbook Pro, and I was looking for in what has been the cause of this. I realized that about 700 GB because of videos on final cut. Knowing this, I saved all my videos and decided to remove the oldest, but keep the new. I checked my storage, and nothing has changed. I realized, the application was not delete videos, but rather delete just how clips have been published. He always kept the full video. So what I request is, is anyway that I can make sure when I delete a project, it will remove all the (video) content, associated with this project? Also, is there anyway that I could delete the video projects I already deleted?

  MAC NEWS...

  OSX El Capitan

  10.11.5 version

  MacBook Pro (retina, 15 inch, mid-2015)

  2.8 GHz Intel Core i7 proccessor

  16 GB 1600 MHz DDR3 memory

  Start drive Macintosh HD

  Graphics AMD Radeon R9 M370X 2048 MB

  Storage 1 TB of storage Flash

  FCP INFO...

  Version 10.2.3

  All depends on how you store your media, be it inside the library or outside the library. If internal sound then the best way to proceed is to organize your material in events as well as your project. When you delete events associated with the project, media in events are deleted as well.

• can I be associated with two or more apple ID account

  We have several devices in our family, 1 an iPad2, 1 iPadMini, 1 iPhone 4s, 1 an iPhone 5 s, 2 two iPhone 6 and a 1 iMac.  They are all currently associates with the same apple ID and the account.  This creates problems with missed calls on other peoples phones or devices, iMessages received by other people to whom it was sent, the games that cannot be shared if connected in game center with the apple ID, because it is by default to the original user who has put in place under the apple ID.

  Is there anyway to have several identifiers associated with the account the same apple so we can share purchases but in effect have private access to each device?  As a parent, it is interesting to receive messages from my children, but in reality, they are of an age where I am ready to provide privacy if they respect borders.  In essence, I don't need to be in their company, 24/7.  If I really want to see, I can get access.

  N an account connects with an Apple ID.

• How can I see what images are associated with my albums?

  I create albums for various subsets of my photos and I would like to see what those who are associated with what albums.  And those who may be associated with several albums.  And who is not associated with albums.

  You can find photos that aren't in any album by creating a smart album with the rule 'Album isn't everything. "

  But the Photos is not a tool to reveal the photo albums is in.  If you want to be able to find the albums, smart albums based on key words to use. For example, instead to drag your photos of birds at a standard album "Birds", assigning the 'Bird' keyword and create a smart album "Keyword is the bird".  So looking at the keywords to a photo, albums, you'll see in.

• How can I access the data associated with an event within the event handler function?

  Hello

  In my LabWindows code, I try to use a DLL that has been developed in .NET (c#).  I used the built-in labwindows Wizard that converts the DLL to a usable 'instrument'.  Almost everything seems to work, except that I have 1 problem.

  There is an event (defined in the DLL) that I am able to detect.  I know that the reminder of the event is called at the right time.  But the problem is that in this function, I can't access the data that is supposed to be attached to the event.  It worked fine in c#, but I don't know how to do in LabWindows.  Here's what looked like in c# event handler function:

  void AppLoaderEventCallback (CommonLib.CommandResult MyResults)

  {

  MyResults is used in the body of this function

  }

  But in LabWindows, I can't seem to access the MyResults data structure.  Here's what I do:

  public static int CVICALLBACK AppLoaderEventCallback (CommonLib_CommandResult MyResults)

  {

  I can't access MyResults here

  }

  Can you help me with this?  I'm doing something wrong?

  Thank you very much for your help.

  -Mike

  I think that your statement of callback function is perhaps not quite correct. Look using the parameter "callback function" function Panel of the generated __Create function associated with this event. This shows the declaration of the callback function - make sure that your callback function is declared in the same way.

• How can I erase whatever it is associated with to Brother DCP-1200. It was added by mistake. I need to erase all the files on my computer related to Brother DCP-1200

  How can I erase whatever it is associated with to Brother DCP-1200.  It was added by mistake. I need to erase all the files on my computer related to Brother DCP-1200?

  You uninstall it?

  I could only partially uninstall the printer. It is not to add printers & devices more. It is not in the list of program. But he is still using a driver. Therefore, I can't fix it just delete it from the Driver list. I don't know anything else to do. Can you give me any suggestions? It makes my computer thinks that it must be installed. JoAnn

• I have wrong associated with a DLL block note as the default program for opening. Can I reset this?

  I have wrong associated with a DLL block note as the default program for opening.  Can someone tell me how to reset it?

  See: http://support.microsoft.com/kb/307859
  TaurArian [MVP] 2005-2010 - Update Services

• When I try to play games on windows vista I get a message saying "this file does not have a program associated with it for performing this action. Create an association in the control panel of the associations. How can I fix it?

  XXXXXX

  Hi Randy,

  Welcome to the Windows Vista answers Forum!

  I have a few questions about your concerns:

  (a) game in which you try to read?

  (b) is this the case with all games or any game in particular?

  (c) you are trying to play the games that are built with Window Vista?

  (d) what version of Window Vista do you use?

  You can also try the suite of measures to define the association:

  1. open the control panel. (Classic view)

  2 click the default programs icon.

  3 click on the link associated with a file type or Protocol with a program . (See screenshot below)

  4 click the extension file type to change which program .exe association opens. (See screenshot below)
  NOTE: It may take a while to load up

  5 click on change program button.

  6 if the list, select the program that you want to be associated with (opens) the file extension. (See screenshot below)

  (A) check the always use the selected program to open this type of program , and then click OK.

  7 if the program is not listed, then click the Browse button and navigate to the .exe of the program you want to default to open the file extension.

  (a) select the program.

  (b) click on the Open button

  (C) check the always use the selected program to open this type of program and click OK to apply.

  This should solve your problem.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Can someone give an example of how to configure the subnet mask associated with the network and host of an IP address part?

  Can someone give an example of how to configure the subnet mask associated with the network and host of an IP address part?

  Hi stuckfree,

  The question you posted would be more appropriate on the TechNet Forums. I would recommend posting your request here.

  http://social.technet.Microsoft.com/forums/en/itproxpsp/threads

• Can not open says attachment error message "the file doesn't have a program that are associated with."

  Can't open some attachments. Error message says: "File has no program associated with it.       HOW CAN I FIX IT?

  Fix it by installing the application used to create the file or application that can read the file.  For example, if it's a .doc file attached, need you Word, Word Viewer, or OpenOffice installed in order to open the attachment. Brian Tillman [MVP-Outlook]
  --------------------------------
  https://MVP.support.Microsoft.com/profile/Brian.Tillman
  If a response may help, please vote it as useful. If a response to the problem, please mark it as an answer.