13 9350 XPS - SSD USB C 3.1 - very unstable/no usable

Similar Questions

• Load the new Dell XPS 13 9350 via thunderbold usb - c

  Recently bought the new Dell XPS 13 9350, 1080 p with the i5 processor version and I would like to know how to load the xps 13 via usb - c port sight.

  Which cable I'm able to use? I would like to use a male USB - A to USB - C cable to recharge the laptop using usb Sockets aircraft.

  Tracked down the answer:

  It does not simply with phone chargers. He needs Chargers portable a higher voltage. You cannot use cable USB A-To-C to load (unless you have a defective cable seriously, which can damage the charger). You cannot use the Nexus 5 X, 6 p or OnePlus Chargers.

  12-9250 Chromebook Pixel 2 and XPS (and perhaps a few other upcoming 2016 Dell systems) include a USB - C charger that works with the XPS 13 and 15. Chromebook Pixel charger is a wall wart, unlike most chargers for laptop with a brick in the middle.

  Buy a compatible USB - C charger costs as well buy a normal replacement Dell laptop computer charger, so it is honestly not much unless you want to use it on other USB - C devices (whether now or in the future). The Pixel charger can also with phones, but I don't know if the XPS - C USB charger can also.

  You'll also USB - C load with docks. Any USB docking station - C and any wharf 3 Thunderbolt should work with it. Dell has wo of them towards the end of the month of January each offers multiple output video, USB - A, Ethernet, audio ports and in charge. Plugable and some other manufacturers some too.

• Portege Z830: Create the recovery and removal on SSD USB recovery partition?

  Hello

  I already found a lot of discussions around the question how to increase free space on the SSD drive.

  Is it possible to remove the recovery partition after you create a recovery key USB with the tool 'Create a Toshiba Recovery media'?
  No risk?

  If it would be possible, how it is possible to assign the space gained on the C: partition?

  Thanks in advance for your advice!

  > Is an option to remove the recovery partition after you create a recovery key USB with the tool 'create a Toshiba Recovery media "?
  > No risk?

  Well, the recovery partition would create again when the laptop recovery procedure using disk recovery or the flash memory stick recovery

  So if you want to remove the 2nd partition, you must create this disc/USB stick recovery before changing something on the HARD drive.

• Construction 9333 XPS with USB ethernet problem

  Hi all

  I'm having a problem with OSD on the XPS 13 9333. I can perform a PXE device boot and install the OS I applied also all pilots of the driver of the CAB on the DELL (http://en.community...ent/w/wiki/2065) website.

  The problem I have is after the task sequence installs the operating system and drivers it reboot to windows 7, once it restarts the USB ethernet is no longer installed so the task sequence will fail.

  I use a Dell fm76n usb ethernet for network device and I have created a driver package to install the driver supplied with the unit but it will still not set please help

  RESOLVED:

  The issue seems to be related to the driver 'bus PCI. When I removed this form the driver package my OSD task sequence finished without any problem

  Concerning

  Robert

• XPS 8500 USB 3.0 Port forward problems

  Ports USB 3.0 on the XPS 8500 give me bad, and from what I can tell, it comes from a physical problem with the port hardware.

  I can acquire and maintain a 3.0 connection when I plug my WD Passport drive or a Rocketfish hub propelled into the ports on the back. Connected to the front, however, I can sometimes 3.0, sometimes only 2.0 and rarely even get no connection at all. Connection I get to the front, if I move to sentence (like touch), the cable or the plug connection can change back from 2.0 to 3.0. Writing on a drive that will prevent mobile 3.0 to the front.

  I noticed that the physical connection of USB plug on the port is more solid at the back than the front. A cable plugged into the rear port 3.0 is able to travel further and the rubber around the contacts of plug of cable on the back of the computer. On the front ports, the connector does not travel in too far, and the rubber of the USB connector is about 1-2 mm of front cover of the computer. A 3.0 cable on the front can move much more than a through the rear hole. I should mention that I have no problem with the USB 2.0 cables or devices in these front ports.

  This isn't a driver problem, it is a problem of the plug 3.0 doesn't not not solid contact in the port. Dell must cease to use the current material in front port and to find a more appropriate part. Then, they can replace all the front ports on the XPS already shipped 8500.

  My problem with USB 3.0 before XPS 8500 ports seems to have been resolved by the new cables. However, my initial assessment of ports before being too loose, making it difficult to get good 3.0 connections still holds upward. To save their customers and themselves from many headaches, Dell needs to find a replacement part for these ports before issues.

  Everything that I had to test this with a WD Passport 3.0 years was HARD and a new Rocketfish powered 3.0 disc hub. Using the cables of original, these devices connected to ports at the back, but not the front. If I held the plug and stuck firmly in a front port, I couldn't sometimes 3.0 connection - although as soon as I let go of the plug I would lose the connection 3.0 and it would immediately reconnect as a 2.0 device.

  I bought a 3.0 a mini-B cable for direct use with the WD drive and a 3.0 extension cable A-male to female for general use. These cables make very positive connections and seem to contribute to compensate ports before release. I can use them in any combination on the front (or back, of course).

  You think that the problem was simply the cables and had nothing to do with the front ports. However, if I plugged the new extension to the front cable, I could then connect the WD drive to that using the original cable that would not connect directly on the front. Which tells me that the strength of the connection of two front port and the original cable was low. Trying to connect these two weaknesses directly was problematic. Solid connectors of the new cable used between two weak points allowed a good connection. This and the fact that the original WD and Rocketfish cables connected to the rear ports 3.0 without problem, points directly to the ports before being part of the problem.

• USB data transfer is very slow on my Qosmio F10

  Hi all
  For some reason, my Qosmio F10 see its 4 hubs USB 1.1 instead of 2.0.
  Whenever I plug a USB key, I get a message that says that I connect a drive high speed in a hub not high speed. Boring!
  The driver version is: 5.0.2.1001 (27.06.2003).
  It doesn't seem to be a USB driver on 'download files' file for the Qosmio on the site of Toshiba UK.
  Of course, I would not upgrade to the wrong driver...
  Any suggestion?

  Hello

  Try to remove all listed USB ports in Device Manager and reboot the device. All ports will be recognized and installed again.

  By the way: as much as I know there is no separate driver for the USB ports and as a result you can't find it.

• USB port - C Dell XPS 13 9350 and external storage

  Hello everyone,

  I have a 3.1 USB enclosure external (Vantec Nexstar USB 3.1, model # NST - 270a 31 - BK) that I connect to the USB - C (Thunderbird 3) of my XPS 13 laptop 9350 port.  The player does not start even after using two different 3.1 USB cables.  I installed all the USB drivers and Thunderbird from the Dell Web site and active port in the BIOS, but still have no chance to get the player to run.

  That's when I plug the player into a standard USB port with a USB 3.0 cable, boots road to the top and is recognized by the laptop without problem.  So if my diagnosis was made correctly, the USB box and wiring is not defective, so the problem must lie with the USB - C port.  Has anyone successfully used port USB - C to access the external storage with a bit of luck?

  See you soon,.

  Kokanee

  In another thread ("XPS 13 9350 - SSD USB C 3.1 - very unstable/not usable '-I can not add links), the following fixed my problem by using a drive HARD USB 3.0 with the Dell USB - C for HDMI/VGA/Ethernet/USB3.1 adapter:

  ... the adapter USB - C and WiFi are kind of material and power wise. If you go to the options of the advance of the WiFi adapter and change the WiFi output at 75%, this solves a lot of problems with the connection / disconnection of USB - C questions. Exit at 75% reduction does not affect your connection on wireless networks.

  My HARD drive kept connect/disconnect when you use the adapter, but this correction took care of her.

• Problems with Dell USB - C (DA200) to the HDMI, VGA, RJ45, USB3 adapter

  Hi all

  I guess I'm a little desperate at 01:45 haha...

  I just got my XPS 13 9350 and it's great. I bought the USB - C DA200 adpater USB3, RJ45, VGA, HDMI. Unfortunately, I have some difficulty with the device. They are listed below:

  (1) plug, computer does not recognize the device. If I right click and uninstall in Device Manager and do a scan 'new material', it works again - but not for long.

  (2) the device and the Realtek gigabit portion to connect and reconnect every second in Device Manager and it's annoying.

  (3) disabling the wireless card/connection really seems to help the unit to connect and it works 100%. ONLY when the wireless adapter is disconnected.

  Basically, windows is to have a real time hard keep this adapter plugged... almost as if he can't recognize it. I tried to install the drivers for the card - nothing. I've updated all the firmware from Dell crush (including the chipset) and the BIOS... nothing. Same thing. If you do a search on google, there are a few discussions on this problem. There is a nice size on Reddit.

  Someone has an idea, what happens? It's a real shame that a beautifully designed and expensive adapter does not work with a Dell computer.

  Thank you, AJ

  In another thread ("XPS 13 9350 - SSD USB C 3.1 - very unstable/not usable '-I can not add links), the following fixed my XPS 13 9550 problem using a drive HARD USB 3.0 with the Dell USB - C for HDMI/VGA/Ethernet/USB3.1 adapter:

  ... the adapter USB - C and WiFi are kind of material and power wise. If you go to the options of the advance of the WiFi adapter and change the WiFi output at 75%, this solves a lot of problems with the connection / disconnection of USB - C questions. Exit at 75% reduction does not affect your connection on wireless networks.

  My HARD drive kept connect/disconnect when you use the adapter, but this correction took care of her.

• Adapter micro SD CARD on the XPS 9350

  Hello! Has anyone found an adapter micro SD Card for the 9350 XPS? I would use an sd card without leaving at the end of the work.

  THX

  Check this one out - some of the reviewers say it works on their XPS 13:

  www.amazon.com/.../B00HV4YFYU

• XPS 13 9350 - that the wireless card - can not update with new wireless driver driver Dell post 22 Feb 16

  Today, Dell released a new driver for the wireless card: Intel Dual Band Wireless - 8260 Driver AC, W10

  I tried to install, but it will not be installed. The platform not supported. (Exit Code Name: ERROR_INSTALL_PLATFORM_UNSUPPORTED).  My device driver lists my wifi as card: Dell Wireless 1820 has 802 .11AC

  I don't understand - all 9350's do not have the same wireless card? Dell website that lists all the templates as the NIC card: DW1820A 2 x 2 802.11ac 2.4/5 GHz + Bluetooth4.1

  We remove installed driver software, and then install the Intel? Otherwise I do not know why Dell offers this update driver for a machine that does not have the Intel inside card.

  Peace.

  kentjapan,

  9350 XPS comes with the Intel® Dual Band Wireless-AC 8260 or 1820A Wireless Dell Wireless cards. If the driver you want to download gives this error, they you can have the other wifi card.  If necessary, click on the link below and add your service tag of the system in the area to detect the system configuration.

  XPS 9350 drivers and downloads
  

  For me, to help troubleshoot, please click on my DELL-Jesse L and send me a private Message with the number of Service Dell and your Dell order number.

  
  

• Special Edition XPS 8500 SSD access

  Can I save files in the special edition of 8500 XPS SSD instead of on the hard drive of 2 t?

  How to find out how much space left in the SSD?

  Anyone have answers?

  Hi cko,.

  Please open the Intel RST and check if your SSD is used as a cache. If this is the case, the answer to your question is no, you cannot save files on the SSD drive.

• Reference Dell m2 / NVME specifications and requirements to upgrade for Optiplex, Latitude, XPS and Precision Mobile

  Good daycommunityof Dell.

  Because of your issues, I am pleased to present the information, specifications and requirements for m2 on various models of Dell below.

  Precision 7710:

  Internal dives supported: 3

  Lead taken configurations supported (max): 3 x m2 or m2 2 x and 1 x 2.5 in SATA.

  7710 PCIE lanes:

  2 m2 slots available are wired in 4 X

  The Bay of 2.5 inch is wired as 2 X

  Parts needed to install an m2 in the Bay of 2.5 inches of 7710 7510:

  1 x 745TM 2.5 inches metal support - most of the units will have this already included

  1 x Y1WJX Support of m2 (goes inside the 745TM)

  4 x 2864 D Screw M3x3. Most systems will have these already included. These screws hold support unit of Y1WJX m2, or a record of 2.5 inches in 745TM.

  1 x WPTND Infill of the m2. This installs in the support of Y1WJX m2.

  5 x 4270E M2.0 * screw 3 L

  1 x HR8P8 Cover thermal m2

  Find instructions here on the Dell Community.

  Precision 7510:
                                                                                                                  
  Internal dives supported: 2
                                                                        
  Drive the supported configurations: 1xM.2, 1x2.5 SATA, 2xM.2, 1xM.2 and 1x2.5 SATA

  PCIE lanes:

  M.2 housing supports 4 x

  The Bay of 2.5 inch is wired as 2 X

  Parts needed to install an m2 in the Bay of 2.5 inches are the same as the 7710 above.

  5510 precision and XPS 9550:

  Internal dives supported: 2

  Drive the supported configurations: 1 x m2, 1 x 2.5 SATA, 1xM.2 and 1 X 2.5 SATA

  PCIE lanes:

  M.2 housing supports 4 x

  The Bay of 2.5 inch is wired like SATA

  Parts needed to install a m2:

  1 x 88DJK thermal pad (no plate required)

  1 x 4270E  Screw M2X3

  Parts needed in order to add a 2.5-inch disk:

  1 x XDYGX cable

  insulator side 2 x 3XYT5 rubber

  HARD drive 1 x 3FDY3 metal support (some units may already have this even if a disk 2.5 inch was not originally ordered from Dell)

  Discussed here on the Dell Community.

  Precision 3510:

  Internal dives supported: 1

  Drive the supported configurations: 1 x 1 x 2.5-inch SATA or m2.

  PCIE lanes:

  M.2 housing supports 4 x

  2.5-inch Bay is wired like SATA

  Parts required for the upgrade of disk 2.5 inch drive m2:
  

  1 x X3YR8  Support for end of m2

  1 x 1X2MT thermal cover

  2 x 4270E  Screw M2X3

  Discussed here on SpiceWorks.

  Latitude E5270, E5470, E5570:

  Internal dives supported: 1

  Drive the supported configurations: 1 x 1 x 2.5-inch SATA or m2.

  PCIE lanes:

  E5270 supports 2 x
  

  E5570 with CPU: supports 4 X

  E5570 with processor U supports 2 X
  

  E5470 with CPU: supports 2 x
  

  E5470 with processor U supports 2 X
  

  2.5-inch Bay is wired like SATA

  Parts required for the upgrade of disk 2.5 inch drive m2 is the same as above 3510.
  

  Latitude E7270, E7470:

  Internal dives supported: 1

  Drive the supported configurations: 1 x m2

  PCIE lanes:

  M.2 housing supports 2 X

  Parts needed to upgrade to IS:

  1 x DJ69P thermal cover

  2 4270E x screw M2X3 (most systems will have at least one of them already included)

  Discussed here on SpiceWorks.

  13 9350 XPS:

  Internal dives supported: 1

  Drive the supported configurations: 1 x m2

  PCIE lanes:

  The available m2 slot supports up to 4 X

  Parts needed:

  1 x 4270E screw M2X3

  OptiPlex 5040, 7040 (Mini Tower):

  Internal dives supported: 2

  Drive configurations supported: 1xM.2, 2xM.2, 1xM.2 and 1x2.5, 2x2.5, 1x3.5

  PCIE lanes:

  The single on board the M.2 slot supports up to 4 X

  The m2 drive installed in 2.5-inch Bay: 2 x

  Necessary parts for the m2:

  Bay of m2 on motherboard:

  1 x thermal Pad J0N94 (installs on the motherboard in the drive of m2)
  1 x YYJF8 live M2X3.5
   
  2.5 inch Bay with m2:

  1 x Cable SATA 6J3FV
  1 x X9FV3 M.2/2.5 inch adapter Bay/caddy
  On the card mother m2 installation instructions found here.

  OS install notes:

  There is a storage updated driver to include PCIE support. (One that you have to install Windows see the drive during installation):

  Intel's most recent

  Dell package

  Driver Samsung

  See also: installing Windows 7 on a SKYLAKE system using MDT: http://www.dell.com/support/article/us/en/19/HOW11493/en

  Obtaining an ISO image:

  For some systems, you can get Dell operating system through Dell hosted image images

  Note: not all systems and service tags will have a picture available.

  Note: Although Dell hosted Images have USB3, they cannot understand the pilot of TSRI currently. (some may know this the pilot to F6). You will need to install the driver of TSRI manually during the installation process of Windows.

  Dell is currently working to add the driver to the TSRI Dell hosted images. No ETA on when this will happen right now.

  Discussed here on SpiceWorks.

  Other works in m2:

  Solid State Drives m2 in chipset Intel Skylake systems Imaging

  Only 1 Solid State Drive (SSD) seen on map stand

  SSD not detected at the start or restart on new precision 15 5000 (5510) or XPS 15 9550

  A PXE with M.2 Solid State Drives boot

  How to distinguish the differences between the m2 cards

  Greetings Ypyap,

  Thank you for your question.

  Yes, the Vostro 14 5468 does support M.2, according to my literature.

  You will need:

  1 x 3P44J m2 stand

  

  x 2 7CJG4 M2 * 2 live (I'm still confirming if cela good reference number)

  

• the d3100 docking station will work with any machine with usb 3?

  Hey out there, I'm trying to find out if the work of the docking station d3100 with any machine with usb 3?

  I want to be able to have my two screens, keyboard and mouse plugged into the docking station and then plug it into my laptop 15 xps but I want my partner to be able to use the machine of office that we have while the laptop is missing.

  If the d3100 supports any machine with usb 3, I can use it as a docking station for my laptop and desktop ;)

  Hi jakewilliamson,

  The d3100 is compatible with the following machines:

  Latitude 3330, E6540, E6440 Latitude, Precision M3800, 3340 Latitude Latitude, Inspiron 15 5000 Series (5547), Inspiron 5000 series 14 (5447), Inspiron 15 3000 series (3542), Inspiron 17 5000 Series (5748), Inspiron 15 3000 series (3541), Inspiron 14 3000 series (3442), Inspiron 15R (5545), 13 (7347) Inspiron, Inspiron 15 Series 5000 (5542), E5250 of Latitude, Latitude E5450, E5550 Latitude, Inspiron 15 7000 Series (7547) 14 5404 rugged latitude, Latitude 7350, Inspiron 14 3000 series (3443), Inspiron 15 3000 series (3543), Latitude 3450, E7250 Latitude, Latitude E7450 processor and controller, 3550 Latitude, XPS 13 (9343), Inspiron 14 3000 series (3451), Inspiron 17 5000 Series (5749), Inspiron 15 5000 Series (5548) 7348 Inspiron, Inspiron 17 7000 Series (7548), Inspiron 15 3000 series (3551), 3150 Latitude, Inspiron 15 3000 series (3558) , Inspiron 5000 series 14 (5458), 5558 Inspiron, Inspiron 5551, 3558 Vostro, Inspiron 14 3000 series (3458), 14 (3458), Vostro 7558 Inspiron, Inspiron 5755 5758 Inspiron, Inspiron 5555, Latitude 3160, 3552 Inspiron, Inspiron 14 3000 series (3452), Inspiron 15 5000 Series (5552), 3570 Latitude, Inspiron 14 5000 Series (5459), Inspiron 15 5000 Series (5559), Inspiron 17 5000 Series (5759), Inspiron 11 3000 series (3153) , Inspiron 13 7000 series (7353), Inspiron 13 7000 series (7359), 15 Inspiron 7000 Series (7568), Inspiron 11 3000 Series (3158), 7559 Inspiron, Vostro 3459 3559 Vostro, XPS 13 (9350), XPS 15 (9550), 12 (9250) XPS, Latitude E5470, Latitude E5570, Latitude E7270, E5270 Latitude, Inspiron 15 3000 Series (3559), Latitude 3470, Latitude 7275, E7470 Latitude, Inspiron 15 5000 Series (5568), Inspiron 13,7000 Series (7368) , 3449 Vostro, Vostro 3549, Inspiron 17 7000 Series (7778), Inspiron 15 7000 Series (7569)

  It has not been tested with computers from other company.

  Thank you.

  -Robert

• Dell XPS 12 format, I lost my license to win 8?

  I have a Dell XPS 12

  I had problems and I lost all my partitions.

  So I had the Dell with an empty SSD.

  Its the weekend and Dell support is closed.

  Fortunately, I have a Dell XPS 12, which is the same model.

  I made a recovery disk Factory Image of my second XPS 12 and restored my first XPS (using the second factory XPS Image)

  However she moved on the XPS license key the first XPS second.

  It will be not active online because he says that it is already in use on my second XPS.

  How can I get my key of the first XPS specification?

  I checked the box to the PC and there is nothing in there with a license key.

  Online research he says Dell integrate the key into the motherboard? That means I've lost my license? or is there a way back?

  OK, the engineer came today with a new Liteon SSD and a recovery key.

  It has replaced the DSS without trying the recovery key, don't know why...

  It replaced the Samsung SSD with a SSD from Liteon (which I am not happy). Then he recovered 12 XPS with USB sent by Dell.

  The touch screen was not working and windows was still not activated.

  He called Dell, dell asked him to follow certain steps which included disabling Secure Boot and tries to get back again. what he does, but he still had the same problem.

  The touch screen seems to be a driver problem and they key seems to be a motherboard problem.

  Reference Dell sent him a new screen, new bezel for the screen and a motherboard to replace...

• Portege R30 does not SSD start after upgrade SSD and HDD

  Hello

  I have improved my Portege R30 - A to add a second SSD (Crucial M550) replace the optical with the new SSD drive with caddy.

  But now the system does not start automatically from the original SSD.

  I could press F12 while turning on my laptop and make it appear the start guide. Here I can see my original SSD and I can boot from it properly.

  In order to boot in the BIOS, I see only the HDD/SSD, USB, ODD memory... It doesn't gives me the possibility to choose between SSDS.

  In any case when I boot in this way than getting blue screens after awhile in win7.

  I tried to install a HARD drive as the second drive instead os SSD and her resut is the same.

  Is that what I can do to solve this, now I have to use the second drive as an external USB drive.

  Thank you

  Hello

  This ODD of SSD/HDD replacement is not always possible and in many cases, the BIOS will not handle and will not recognize the new HARD disk correctly.

  That I can remember some old laptops Toshiba Tecra and Portege that supported the functionality of Slim Select Bay were able to manage the 2nd HARD drive instead of driving WEIRD, but this was not possible due to the available selection slim Bay.

  In your case it looks like the laptop so that the BIOS does not support this function and, therefore, the additional SSD/HDD isn't recognised correctly.