1361 dv6 slider

Similar Questions

• Display the slider volume not showing on dv6-1355dx

  Slider volume control adjust the volume, but does not appear on the display. Did a hard reset but does ' t solve the problem.

  Any suggestions will be appreciated.

  Using a HP dv6-1355dx MediaSmart with Windows 7 SO.

  Thank you

  MELC

  Thank you Paul,.

  The software you suggested did the trick.

  Thank you very much.

• HP Pavilion dv6-2005tx volume slider doesn't work do not

  I recently upgraded my OS to Windows 7 32-bit to an operating system of windows 7 64-bit manually and it erased all my drivers. I managed to get all of their return with the exception of this embarrassing a volume slider.

  Someone know where I can get this particular pilot?

  Thank you

  Hello

  Download and install MediaSmart SmartMenu (version 3.1.2.2 for 32/64-bit Win7) to here.

  Important note!

  Until you install software that you need to have installed at least a MediaSmart product above. The best choice will be in my opinion:

  MediaSmart DVD here (version 4.1.4328 for 32/64-bit Win7)

  If you do not use any additional software you can download and install 3VRX (ver 2.5 for 32/64-bit Win7) from here.

  Note:

  Here is YouTube video that shows what can be done with the 3VRX software.

• HP Simplepass stops working. HP Pavilion dv6. Assistance needed

  Everytime I open Hp Simplepass, he tells me to scan my finger on the sensor. However, when I slide my finger across the sensor, I get an error saying: "it seems that you are experiencing some problems. You want to try again? »

  It's really frustrating because he did this for about 2 or 3 months now, and it worked perfectly fine before, when I started using the simplepass.

  My computer specs:

  -HP Pavilion dv6 notebook

  -Windows 7 x 64

  -Product number: LW262UA #ABA

  Record biometric device:

  -Validity Sensor (WBF) (PID = 0018)<--(This is="" written="" exactly="" as="" found="" in="" device="">

  -The version of the driver is 4.3.118.0

  [When I discover the properties of devices, it is said that "the device works properly."]

  -HP SimplePass 6.0.100.276.

  I searched the web and tried a lot of different solutions that I found, that were simular to my problem. However, I didn't chance still. Here are a few things I've tried:

  -Hard Reset

  -Clean the re-booting

  -Uninstalling the driver and let windows re - install it automatically on reboot

  -Update the driver

  -Disable the driver, then in reactivating

  I have not tried to do a system restore point, because I do not have a restore point that was 3 months ago. Also, I would lose a lot of this parameter and that I currently have.

  Any help would be greatly appreciated

  I found the solution to this problem after a lot of work.

  I went to the Device Manager and uninstalled completely, the pilot of the validity and the parameters. Then I opened my control panel and navigated to the list of programs, uninstall a program.

  I uninstalled the program called 'validity WBF DDK"completely. I tried to uninstall the other program next to what we call the 'validity DDK sensors", however, it gave me a warning message indicating that uninstalling this program, could perform other software or devices. So, to avoid any problem of unnessary, I avoided to procceed with the uninstall of this specific programme.

  Then once I finished the "WBF DDK validity" uninstalling, I navigated to a search engine HP store and looked for a software based on my computer model number. (http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=5118737#N1655)

  Then, I downloaded the program simplepass safety on this page category. I also downloaded the driver for validity.

  The pilot of validity was sp53369.exe and the program simplepass sp54680.exe.

  Pilot of validity: http://ftp.hp.com/pub/softpaq/sp53001-53500/sp53369.exe

  SimplePass program: http://ftp.hp.com/pub/softpaq/sp54501-55000/sp54680.exe

  I installed the driver of validity first, and I chose 'Yes' when he was asked to replace all the other data that was there.

  After that, I ran the download simplepass and successfully installed.

  I rebooted my computer and connected. (with password)

  Then, a message pops up saying something about searching for a driver or something like that. And he has been looking for him.

  I let him finish what he was doing and about 5 minutes or more, it's over. I tried, and then open the program simplepass. It has successfully opened and I could finally record a finger.

  Once I have registered a finger (and a toe) I closed the window simplepass and hit windows key + L to lock my pc. Then I spent my finger to check if it works, and to my surprise, it worked.

  I hope this helps if you have the same problem, I've had.

• Often fingerprint reader stops working after laptop wakes from sleep (Pavilion dv6)

  I am convinced that the fingerprint reader is fine. There must be a problem with the driver may, something inconsistent with a recent update of the Windows 7 software?

  The scenario:

  • Laptop works very well.  I put on standby when I'm done and use the mousepad to wake him up.  LED fingerprint reader blinks, and I can drag my finger to log on.
  • At one point, after a few times to put the laptop to sleep and wake, the fingerprint reader does not.  No flashing.  I slide my finger and the player does not respond at all - is not yet tell me that there was a bad reading.
  • If I login and log back in again, no change. However, if I do a reboot, everything is fine - the fingerprint reader works again.

  I watched over and over again for new drivers and installed.  Nothing seems to affect this scenario.   Unfortunately, this has started to happen about 9 months ago () and because of the sporadic nature of it, I was not attentive enough to know the 'precise' point in time when it started happening.  My instincts tell me that there was some sort of update software/driver along the way which is originally the fingerprint reader not do not work right.  I hope HP continues a relationship with these companies to fingerprint reader and can transmit these questions so that we can do a software update.  But... I don't know if it has been abandoned.  My laptop is still under warranty, but it would be ridiculous to send in just this problem.

  I hope that someone has heard of this on the dv6 and may know a solution.  Thank you!

  My system is a HP dv6-6145dx.  I am running Windows 7, with the latest updates.  The integrated fingerprint reader works on HP Simple pass 2011 v5.1 and Validity Sensor driver 4.3.205.0 version.  When I try to launch the Simple passage interface, it loads the database, but then the application disappears.  I tried to uninstall and reinstall the software, but makes no difference with the issue, I noted.

  "If you keep an open mind, life will give you more opportunities."

  No problem, I am completely I shouldn't bother with Pass Simple version 8.  I advanced and installed version 6.  I did not yet get no joy, so I did a little more digging and found one more late Validity Sensor driver, version 4.3.304 (not noted in the list of update driver for my laptop model).  IT WORKED.  I can now go into hibernation and the fingerprint reader remains functional when the system is out of hibernation.  Previously, it was pretty much guaranteed became disabled.  So... it looks that my problem is now solved.

  

• HP Pavilion dv6 has just had a MS XP Update now, I have NO SOUND

  New HP Pavilion dv6 Notebook running on Windows XP just had an update on 01/01/12 and the sound stopped working.

  IDT High Definition CODEC shows that status is ERROR (52) and no sound.  I have a updated driver and uninstalled the device and re-installed.  It does not work.  It was working fine before the update.  Help, please.  Thank you.

  Do a system restore at least a day before MS Update.Start, all programs, accessories, system system restore tools. Choose to restore to an earlier time and choose an available date before the update.

  If MS downloads updates yet, choose the custom option or else display updates. It may be that MS is trying to send a new audio driver that fails. Deselect and make the ting on do not show it again... If update on XP that still offers.

  If MS slides audio driver in once again, do a restore on the audio drivers in Device Manager.

• Pass simple don't connect screen locked HP DV6 P 605ea

  Hello

  I've been running Simple pass Windows 8.1 on my HP Pavilion DV6 6053ea for a while now and only in the last few days it has stopped working properly.  It won't let me through the lock screen.

  I don't want to enter a password every time win 8.1 starts so I disabled who.  When the screen saver is on to the lock screen, if I slide my finger that I get a white light but it won't unlock but I can easy to use the mouse to move the drop to the bottom of the screen of the road and it brings back me in the deskop.  Now if I press the WINDOWS and L and pass my finger it will bring me to the deskop...

  What is going on? I would like to SimplePass recognize my finger when the phone is locked.

  Hello

  That would be the way that software is designed to work.

  "A fingerprint reader is a safety device that uses a scanned image of your fingerprint to authenticate your identity. With the security of fingerprint software you can connect to the applications and secure Web sites by scanning your fingerprint instead of typing your user name and password on the keyboard.

• display at the top of my laptop dv6 volume no longer works?

  The volume/slide at the top of my laptop dv6 button stop working. I still have sound you can not cut or adjust the volume by touching the control?

  Hello
   
  Try a Hard Reset as follows.
   
  Shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery, connect the power adapter and start Notepad.
   
  Kind regards
   
  DP - K

• HP dv6-2150us + Windows 7 64 bits + quick launch problem

  I have a new install of WIndows 7 64 bit on my HP dv6-2150us, and now there is a problem with the Quiclaunch buttons. Before my reformatting to get a clean install of windows 7, the quick launch buttons has worked, after the installation of the new, I have a problem. The problem is that pressing the volume buttons or button mute are not any notification on the screen. I can adjust the volume from the keys, but no statement is displayed (I need to check the volume slider in the bar of tasks to see how I increased or decreased it). Mute works also but still no notification.

  I installed all necessary drivers and the problem does not reolved. I wonder if windows 7 is somehow blocking notifications or if it's a problem with the application of buttons?

  Install 3RVX,

• HP Simple pass 2012 does not after that I said do not yet show message on my laptop dv6 series

  HP Pavilion Dv6-6116us

  Windows 7 64 bit

  I recently got this new laptop. I've been infatuated with the simple pass feature. I used it for my facebook and gmail accounts. Unfortunately today, I pressed on the do not see the message box thought I would still be able to use it. However, I soon discovered, that I can't use simple past on my gmail account. I can always use it on my facebook account. It's really frustrating for me because I really liked the simple pass on my gmail account. I'm at a loss. I pressed on turn off and turn on the account of the simple pass program in 2012. I am very angry. Can someone help me please? I just want to use simple past on my gmai account again.

  You will be OK!

  • Start the program SimplePass
  • Slide your fingerprints to open it
  • Pass the 'show all' to the 'personal '.
  • Find your webcard "gmail" and
  • Right click on it
  • Website of the Enable Log CHECK on
  • Save

• HP dv6 volume scroll not visible

  Hello

  I have hp dv6 laptop US 1350... the volume slider is not visible on my monitor the workload but not visible please help

  Hello

  Download and reinstall HP MediaSmart SmartMenu on the following link - note that you must have at least an another MediaSmart application already installed.

  HP MediaSmart SmartMenu.

  After reinstalling, restart the laptop.

  Kind regards

  DP - K

• How to activate slide it to unlock the feature in iOS 10

  Can any body guide how to go back to 'slide to unlock' feature iOS 10 as we have it available in iOS 9. (it is required without use of contact id)

  Concerning

  I have a question too, can not use the "slide to unlock".

• Slide to open, how to inform apple we want it back

  How to inform apple that we want the Slide-to-open back function?

  See the following: http://www.apple.com/feedback/iphone.html

• Slide view

  Hello everyone...

  I have been using my iPad 12.9 pro for a while now, and I have a question about the slide mode, which I really hope you can help me.

  I wanted to be able to choose what applications are indicated on this side bar (View Slide Bar), since there are many applications that are shown here that I have no use for. Friends, autocad, bandsintown are a few examples of it. I wanted to keep it there just the apps that I REALLY want to use, and I find it annoying that I have to scroll through a lot of apps just to find the one I need.

  If I'm lazy, let me know, but I think it would be a good idea to put only the ones you need right?

  Thanks in advance

  Rodrigo

  Hello. It's a good idea, and you can inform Apple here https://www.apple.com/feedback/ipad.html. However, it may require a fairly major overhaul of internal interfaces, so don't expect a quick change.

• IPhoto breaking when running a slide show

  Hello

  My iPhoto 11 9.4.3 crashes whenever I try to run a slide show. I have a 2012 end Macbook Pro osx 10.8.5 with all updates of operation. I tried a lot of things.

  I rebuilt and repaired each option with the option/command start of iPhoto on libraries, but nothing helped.

  Can someone help me please, thank you.

  Here is the message I get to send to apple. It is not the complete message, but can send it if necessary.

  Process: iPhoto [562]

  Path: /Applications/iPhoto.app/Contents/MacOS/iPhoto

  ID: com.apple.iPhoto

  Version: 9.4.3 (9.4.3)

  Generation information: iPhotoProject-720091000000000 ~ 2

  Code type: X 86 (native)

  Parent process: launchd [242]

  User ID: 506

  Date/time: 2016-09-24 17:14:08.736 + 0100

  OS version: Mac OS X 10.8.5 (12F2560)

  Report Version: 10

  Interval since last report: 25511 sec

  Crashes since last report: 44

  Per-App interval since last report: 3290 sec

  Per-App crashes since last report: 41

  Anonymous UUID: 6921A4BF-76FC-8875-4398-0E00C1E31CA4

  Crashed thread: 0 dispatch queue: com.apple.main - wire

  Exception type: EXC_BAD_ACCESS (SIGSEGV)

  Exception codes: KERN_INVALID_ADDRESS at 0x00000000c53b93f0

  VM regions near 0xc53b93f0:

  CG backup stores 00000000c4cc7000-00000000c4cfb000 [208K] rw-/ rw - SM = SHM

  ->

  CG backup stores 00000000c7e46000-00000000c83a2000 [5488K] rw-/ rw - SM = SHM

  Request for clarification:

  Run @selector (playMarimbaAction :) to sender IPKButton 0x7ca42670

  Thread 0 crashed: Dispatch queue: com.apple.main - wire

  0 com.apple.JavaScriptCore 0x954083ae JSC::DFG:GPRTemporary:GPRTemporary(JSC::DFG::SpeculativeJIT*,_JSC::DFG::StorageOperand&) + 110

  1 com.apple.JavaScriptCore 0x95438dc4 JSC::DFG:SpeculativeJIT:compile(JSC::DFG::Node&) + 59684

  2 com.apple.JavaScriptCore 0 x 95409929 JSC::DFG:SpeculativeJIT:compile(JSC::DFG::BasicBlock&) + 889

  3 com.apple.JavaScriptCore 0x9540bb85 JSC::DFG::SpeculativeJIT::compile() + 69

  4 com.apple.JavaScriptCore 0x953f601f JSC::DFG:JITCompiler:compileBody(JSC::DFG::SpeculativeJIT&) + 63

  5 com.apple.JavaScriptCore 0x953f6e47 JSC::DFG:JITCompiler:compileFunction(JSC::JITCode&,_JSC::MacroAssemblerCodePtr&) + 231

  6 com.apple.JavaScriptCore 0x953f473c JSC::DFG:compile(JSC::DFG::CompileMode,_JSC::JSGlobalData&,_JSC::CodeBlock*,_JSC::JITCode&,_JSC::MacroAssemblerCodePtr*) + 1020

  7 com.apple.JavaScriptCore 0x953f432e JSC::DFG:tryCompileFunction(JSC::JSGlobalData&,_JSC::CodeBlock*,_JSC::JITCode&,_JSC::MacroAssemblerCodePtr&) + 46

  8 com.apple.JavaScriptCore 0x954471af JSC::jitCompileFunctionIfAppropriate (JSC::JSGlobalData &, *: OwnPtr < JSC::FunctionCodeBlock > &, JSC::JITCode, JSC::MacroAssemblerCodePtr, JSC::SharedSymbolTable * & &, JSC::JITCode:JITType, JSC::JITCompilationEffort) + 271

  com.apple.JavaScriptCore 9 0x95445fb7 JSC::FunctionExecutable:compileForCallInternal(JSC::ExecState*,_JSC::ScopeChainNode*,_JSC::JITCode::JITType) + 311

  10 com.apple.JavaScriptCore 0x95445e73 JSC::FunctionExecutable:compileOptimizedForCall(JSC::ExecState*,_JSC::ScopeChainNode*) + 51

  11 com.apple.JavaScriptCore 0x953daa6a JSC::FunctionCodeBlock:compileOptimized(JSC::ExecState*,_JSC::ScopeChainNode*) + 58

  12 com.apple.JavaScriptCore 0x95464e20 cti_optimize_from_ret + 352

  13?                           0x1ad37d4a 0 + 450067786

  14 com.apple.JavaScriptCore 0x95339edc JSC::Interpreter:executeCall(JSC::ExecState*,_JSC::JSObject*,_JSC::CallType,_JSC::CallData_const&,_JSC::JSValue,_JSC::ArgList_const&) + 972

  15 com.apple.JavaScriptCore 0x95339b03 JSC::call (JSC::ExecState *, JSC::JSValue, JSC::CallType, JSC::CallData const &, JSC::JSValue, JSC::ArgList const &) + 83

  16 com.apple.JavaScriptCore 0x9546ca00 JSC::boundFunctionCall(JSC::ExecState*) + 560

  17?                           0x1950836f 0 + 424706927

  18 com.apple.JavaScriptCore 0x953324a4 JSC::Interpreter:execute(JSC::ProgramExecutable*,_JSC::ExecState*,_JSC::ScopeChainNode*,_JSC::JSObject*) + 3812

  19 com.apple.JavaScriptCore 0x953dd7ed JSC::evaluate (JSC::ExecState *, JSC::ScopeChainNode *, JSC::SourceCode const &, JSC::JSValue, JSC::JSValue *) + 333

  20 com.apple.WebCore 0x038b34d9 WebCore::ScriptController:evaluateInWorld(WebCore::ScriptSourceCode_const&,_WebCore::DOMWrapperWorld*) + 441

  21 com.apple.WebCore 0x038b30b8 WebCore::ScriptController:evaluate(WebCore::ScriptSourceCode_const&) + 40

  22 com.apple.WebCore 0x038d5d45 WebCore::ScriptElement:executeScript(WebCore::ScriptSourceCode_const&) + 149

  23 com.apple.WebCore 0x03b75d33 WebCore::ScriptElement:execute(WebCore::CachedScript*) + 163

  24 com.apple.WebCore 0x03b75bde WebCore::ScriptRunner:timerFired(WebCore::Timer<WebCore::ScriptRunner>*) + 430

  25 com.apple.WebCore 0x03b75a26 WebCore::Timer < WebCore::ScriptRunner >: + 38 fired()

  26 com.apple.WebCore 0x0384e79c::ThreadTimers::sharedTimerFiredInternal() + 172 WebCore

  27 com.apple.WebCore 0x0384e6da::ThreadTimers::sharedTimerFired() + 106 WebCore

  28 com.apple.WebCore 0x042d1fc0 WebCore::timerFired (__CFRunLoopTimer *, void *) + 64

  29 com.apple.CoreFoundation 0x95ba9406 __CFRUNLOOP_IS_CALLING_OUT_TO_A_TIMER_CALLBACK_FUNCTION__ + 22

  30 com.apple.CoreFoundation 0x95ba8da5 __CFRunLoopDoTimer + 709

  31 com.apple.CoreFoundation 0x95b8dbb2 __CFRunLoopRun + 1842

  32 com.apple.CoreFoundation 0x95b8d01a CFRunLoopRunSpecific + 378

  33 com.apple.CoreFoundation 0x95b8ce8b CFRunLoopRunInMode + 123

  34 com.apple.Foundation 0x91fd9b76-[NSRunLoop (NSRunLoop) runMode:beforeDate:] + 278

  35 com.apple.Foundation 0x91fd9a15-[NSRunLoop (NSRunLoop) runUntilDate:] + 73

  36 com.apple.iLifeSlideshow 0 x 01755808-[MPDesktopAssetManager _iTunesMediaManager] + 235

  37 com.apple.iLifeSlideshow 0x0175a770-[MPDesktopAssetManager (VeryInternal) findMediaObjectWithPathInILMB:] + 383

  38 com.apple.iLifeSlideshow 0x0175765d-[MPDesktopAssetManager (Private) mediaObjectForAssetAtPath:] + 438

  39 com.apple.iLifeSlideshow 0x01755c4a-[MPDesktopAssetManager durationForAssetAtPath:] + 389

  40 com.apple.iPhoto 0 x 00181524 0x2b000 + 1402148

  41 com.apple.iPhoto 0x00183ca9 0x2b000 + 1412265

  42 com.apple.iPhoto 0 x 00181946 0x2b000 + 1403206

  43 com.apple.iPhoto 0x0017fc9e 0x2b000 + 1395870

  44 com.apple.iPhoto 0x0017f36d 0x2b000 + 1393517

  45 com.apple.iPhoto 0x0017f124 0x2b000 + 1392932

  46 com.apple.iPhoto 0x0017e168 0x2b000 + 1388904

  47 libobjc. A.dylib 0x92c675d3-[NSObject performSelector:withObject:] + 70

  com.apple.AppKit 48 0x974dead2-[NSApplication sendAction: to: from:] + 436

  49 com.apple.AppKit 0x974de8e0-[NSControl sendAction: to:] + 102

  com.apple.AppKit 0x974de7ef 50-[NSCell _sendActionFrom:] + 159

  51 com.apple.AppKit 0x974dcd60-[NSCell trackMouse:inRect:ofView:untilMouseUp:] + 1895

  52 com.apple.AppKit 0x974dc59f-[NSButtonCell trackMouse:inRect:ofView:untilMouseUp:] + 511

  53 com.apple.prokit 0x0232b580-[NSProButtonCell trackMouse:inRect:ofView:untilMouseUp:] + 521

  54 com.apple.AppKit 0x974dbcb9-[NSControl mouseDown:] + 867

  55 com.apple.iLifeKit 0 x 02228636-[IPKButton mouseDown:] + 375

  56 com.apple.AppKit 0x974d3921-[NSWindow sendEvent:] + 6968

  57 com.apple.AppKit 0x974ce90f-[NSApplication sendEvent:] + 4278

  58 com.apple.iLifeKit 0x02255cab-[iLifeKit sendEvent:] + 55

  59 com.apple.iPhoto 0x000abb04 0x2b000 + 527108

  60 com.apple.AppKit 0x973e862c-[NSApplication run] + 951

  61 com.apple.AppKit 0x9738b5f6 NSApplicationMain + 1053

  62 com.apple.iPhoto 0x0003b0b9 0x2b000 + 65721

  63 com.apple.iPhoto 0x0003a705 0x2b000 + 63237

  Post edited by: average windmill

  The changes were that simply the message to apple is not the complete message. Can send the complete message if necessary.

  Older versions of iphoto are break when they use the functionality of the site.  Slide show you uses it maybe places?

  The problem is, that Apple has not renewed the contract with Google for access to location servers, and older versions of iPhoto will plant it, when they need to find a location and try to access Google's servers.

  See this: Bug: iPhoto 9.4 crashing when viewing the scene

  You have several options as described in the tip of the user:

  • Try to upgrade to a version of iPhoto that uses different servers, if you can update to iPhoto 9.6.1 on Sierra. IPhoto 9.5.1 find use serve various places of research.
  • Patch iPhoto to delete the iPhoto Application package Java script code
  • Patching javascript files and add your own for Googles servers access key.