1394 on Latitude E5420 capture drops frames

Similar Questions

• Dropped frames during the analog-to-digital capture

  Slowly working on a project to capture analog 8mm video tapes to my computer without any problems so far, I'm getting a lot of dropped frames on a particular band. I use Scenalyzer to capture and on this particular band, get about 30 loss of images every 10 to 15 seconds.

  I cleaned the heads of the camcorder and stop the background processes on my computer with no improvement.

  A test, I captured the same clip using WinDV and had losses significantly fewer images, but WinDV don't optical scene detection that is why I prefer to continue to use Scenalyzer.

  He it software or my computer causing the drop frames or is it state age of the 8mm tape? All advice appreciated.

  Paul,

  Who Strip was reused?

  If not, then as a test and then you play the tape forward, can play in reverse (no FFW and rewind) and try again?

  Good luck and wish that I had some instant "fix."

  Hunt

• Dropped frames and jerky video ATV4 TVOS 9.2

  I'm having a problem with my Apple TV after upgrade to TVOS 9.2. Whenever I play video (especially videos YouTube, but this also happens with other applications such as WatchESPN), after a while, the video begins a fall frames and the sound is not synchronized with the video. I can remedy temporarily by force, killing the app or by restarting the Apple TV, but it comes back later and video will get out of sync and drop frames. How to solve this? This came after my update for TV OS 9.2.

  Sounds like a network problem.  Check that you are connected to the correct wireless.  Some routers are dual band, so make sure you're on the 5 GHz band.  If this does not work, I do a full restore back to factory settings and re-setup.  I know it's a giant pain, but if this isn't a connectivity problem, this is a question of OS.

• Latitude E5420 Microphone driver (< ADMIN NOTE: maintain the label removed by privacy policy >)

  Hello

  How (where I can find) to install the driver for microphone in Latitude E5420 (ADMIN NOTE: maintain the label removed by privacy policy >)?

  Thank you

  Hi gauxrox,

  I have provided a link that might help you with micro drivers:

  http://Dell.to/OuLIES

  Click on the link above and install the drivers.

  Answer please if you have any other questions.

• Latitude E5420 headphones/mic combo jack pinout?

  Hi all

  My headset has separate microphone and headphones connectors but my Latitude E5420 came with a single headset/microphone combo Jack. I read on this forum that as the headset buddy adapters should solve the problem, but I could not get any locally to test before purchase.

  I am planning to make my own adapter, but could not find any Dell documentation on this combo Jack, let alone its stitching. Can you guys help me with this, please?

  Much appreciated in advance

  François

  Thanks Jim. I also had an online chat with Dell support, as well as correspondence by e-mail, even sought and obtained feedback from developers, but still no definitive answer.

  Using the fly-wires to connect an open plug a headset I can confirm that the pinout is as given for iPhone here - from the left, right, end to the ground, neck pickup.

  See you soon,.

  François

• Dropped frames with 980TI, very fast processor and SSD

  Hi all

  I'm currently editing some 4 K and 1080 cineform film scan 1 sequences on a 1080 p timeline, the things is I have a lot of dropped frames, when using plugins (Accelerated ones) stock on adjustment layers, sometimes even on the clip to...

  Is this normal given the CPU goes from 80 to 100%, but the GPU is just over 40%?

  My equipment is:

  8.1 to Windows and the latest demo of first Pro CC

  2600K @4, 5 ghz

  12 GB of ram (could be the cause)

  GTX980ti (Stable OC)

  Vertex SSD for the OS

  SAMSUNG SSD for the project and sequences (Blackmagic speed test shows constant ~490 mb writing ~ 520 MB read)

  Thank you all

  Clock speeds are not a reliable indicator of processor speeds - they hit a ceiling a few years back really, so they found other ways to make processors faster and more efficient without increasing the clock speed.

  Your 2600K is a Core i7 2nd generation with 4 cores and 8 wires, while the most recent 5th-Gen 5820 K 6 cores/12 threads, but "only" a 3.6 Ghz compared to your 4.5 Ghz clock speed, but what one do you think is faster?

  You will probably need a new motherboard for the processor more recent, but even if required do not, would be prudent or the old motherboard would be a performance bottleneck. Most recent MB would be faster RAM. And get at least 16 GB of RAM, if not more.

  You want a system that is "balanced", which means that all the components complement each other. You don't get full of the GTX 980, since performance the old processor and motherboard are dragging it down like a boat anchor. Like putting a Corvette engine in a Chevrolet Vega old... you won't have any suspension, steering, braking, traction to handle all that power and will not be able to open up the throttle! With the new CPU, MB and ram, you would have a more balanced system. A Hot Rod. You can even add another drive, or both, for example, the media Cache.

  Check under file > Project Settings > General to see if the GPU rendering is enabled, or if the value to the software - cannot even make use of the 980 for acceleration card.

  Thank you

  Jeff

• XAVC 4 K reading dropped frames and stuttering

  Hello

  We have several computers running different configurations which has problems reading 4 K XAVC - I the FS7 camera.

  While reading real itself is quite fine, and the CPU usage revolves around 25% even with applied classification, the start and stop of playback induced by the LAG, dropped frames, stuttering and 1-2 second hangs. CPU usage spikes to 100% during these events.

  I had the problem on an i7 3930 K, 64 GB ram, ATI R9 290 x and well thought out, maybe it's a bad Windows Installer and weak chip, so I upgraded to the current specifications:

  I7 5930 K OC'd to 4, 05ghz

  64 GB DDR4 2600 mhz

  NVIDIA GTX 980 Ti at stock speed

  Windows 10 100% new installation without other programs other than Adobe and fresh drivers installed on the web.

  RAID 0 with 4 x WD Black drives 4 TB of external PCI-E RAID controller.

  Operating system installed on the SSD #1

  Programs installed on SSD #2

  Latest CC from Adobe installed

  Last installed CC body

  This computer cut 4K like butter, but it hangs and lags when you press SPACEBAR or mouse clicking play to start.

  What could be the problem?

  Hi Romsdalsfilm,

  The problem also existed before the last update, which happened a few days ago.

  We had a similar bug that close in 2015 CC we couldn't reproduce it. It looks like he may have made their reappearance. If you have time and have not already done so, Please fill out a bug.

  Thank you

  Kevin

• First 2015 bi - gpu dropped frames

  Can someone with dual GPU or mulitple tell me if they encounter problems reading a chronology of acceleration GPU with Prem 2015 on Windows 8.1? With my two nVidia 980Tis I get 1,000001 million dropped frames. With a released GPU, I get a perfect reading.

  I've been in contact with Adobe engineers, and they are not aware of any questions. I know that the 980Ti is not on the supported list, but with only a single installed things are fine. Whether it is a double thing 980Ti or both GPU would help a lot.

  Thank you

  Adobe Premiere Pro CC and GPU support |  First work Pro area

  Please note that first Pro CC has support for multiple GPU configurations to export (one is used for playback) to have more than one GPU will speed up your time to exit.

  If this article is correct, first will not use both for playback. You can try to set the nvidia Control Panel to set the first to use a card for cuda gtx. then use SOUL to return and let it use cuda with two gtx cards.

  Bill Gehrke has used several gpu, it might have some tips.

• Removal of Capture of frames?

  I use the Adobe CS6 of first Creative cloud to capture a video stream coming from a panel of broadcast ATEM 1 M/E, enter into the computer using a BlackMagic DeckLink Mini recorder via a SDI connection.

  Any time by the Capture window to record the live stream the Panel, coming at random times preview and timecode freeze, indicating a frame has dropped, and the capture stops just at this moment. I have allocated 6.5 GB of RAM for the program of first and make sure that no other program running in the background with the exception of my antivirus software. The last time this happened it was due to my nVidia card that requires an update for the drivers, but this time it is not the case because I checked and checked to make sure that the latest drivers are installed for everything on the computer.

  I used the BlackMagic disk speed program to verify that writing and reading speeds to first target drive is recording to, and I'm getting between 150-183 MB/s for read and write speeds after running the test three times.

  Does anyone have an idea what to do to fix this a loss of image? I'm happy to provide additional information for first capture settings and output of the ATEM Panel settings.

  Jacob, when you capture using the Black Magic Media Express software, you have the ability to capture the non-compressed, or as video MJPEG (zipped file) using the codec of black magic. No other material is needed to 'compress' video, which is done during capture. Please check your capture settings. If it says 8 or 10-bit uncompressed, there is the question.

  Thank you

  Jeff Pulera

  Safe Harbor computers

• New iMac, still getting message "dropped frames".

  Hello world! Completely new to this naked community with me if I missed something!

  Recently entered the video editing in which I cut me my friends macbook pro 24/7 to use! Understandably, she's had enough, so I paid my iMac. After much research, it was clear that for FCPX, I need specs high for it to run smoothly! I got the iMac 21.5 "3.3 GHz quad-core i7 with 16 GB of RAM and a 1 TB fusion drive (thought I would be playing it safe with these tempting specs of future proof it slightly)

  Now, after 2 days, have a bit to go on FCPX I realized his lightning not as fast as I had hoped. The main problem I found was that when you create a timelapse video changing 3 minutes of film in 10 seconds I ALWAYS get a 'video images were dropped while listening to the message". I understand that I can change between proxy/optimized etc but I didn't really expect having to run on something other than the highest settings with a brand new Mac at this level.

  I'm shooting off the coast of a hero of go - pro 3 + using 1080 p at 60 frames per second, if this can help.

  The only thing different I did was defined the project at 60 frames per second instead of 30 (if I'm honest don't know what difference does it make if you have registered in the same fps)

  Is there something I can do or something why the iMac isn't running as fast as I hope?

  Sorry for the essay and thanks for the help in advance!

  twice the frames per second two time requirements, could be the drive of fusion which cannot follow if the data is not stored on the ssd part.

• Recorder captured without frames

  I use Adobe first Elements 7 and Windows Vista.

  I'm trying to capture video from a VHS tape.

  I think that I have the equipment implemented correctly, I can see the preview in the capture window. However, when I press break to test the capture, I get the message no frames were recorded.

  Can someone help me, please?

  Concerning

  David

  You say you use your Sony as a transmission?

  If so, as I said above, you should not use the break or other keys in the program. It won't be that confuse the program, since there is no direct link between your computer and your player of VHS tapes. The only button must be pressed on the program is the Capture button.

  You also need a cassette into your Sony, of course.

  You can also in your remote device in Premiere Elements, check the options to split the scenes of Timecode are unchecked. This feature too can confuse the program when you use a pass-through.

• XAVC exports a drop frames

  I'm working on some effects Visual of low-medium for local production; their post workflow is all 4 k (shot on red, edited on the body). They send me trimmed body seq, I bounce AE individual plans to help replace w / function AE Comp, work on them, making the shots on and send things finished to the customer. I was export XAVC. MXFs by SOUL (XAVC Intra 4 class k 480 3840 x 2160), but I found that part to make short shots 1 framework. The source parameters and output are the two 23.976 progressive, is not a question of DF/NDF. The length of the comp, ins and outs in AE are certainly all very well. Made out in a different codec (Animation of QT or DPX, for example) works perfectly well. Add a frame at the end of my comps does not seem to do the trick, either, for some reason any. Any suggestions?

  If no one can help to solve the problem, anyone have any suggestions for other codecs? Specifically, the colorist asked that I DIDN'T send the Animation of QT files; The DPX files end up being HUGE... ~ 170 clocks in frames to slightly more than 5 GB. Everything must always go to the color, so I need something that is the highest possible quality. ProRes is out. DNxHR is still a few months away. They prefer the stand-alone files, instead of image sequences (although, ' eff right em has, if necessary.) Process a seq image isn't exactly a big deal...).

  Ideally, I would like to just get this XAVC thing sorted, however.

  I'm not in the team of the SOUL, so I can't comment on when their bugs could be addressed. If I read correctly this recording of bug, however, it seems that this might be a limitation of XAVC not dealing with odd numbers of frames.

• Latitude E5420 dead, shows battery, white & Orange flashing battery light

  My E5420 battery appears to be dead: if I unplug the AC adapter, it is turned off.

  The battery passes Diagnostics. Diagnosis shows the battery is responsible for 74%, but wrong upward. The battery is 77%.

  When the power adapter is plugged in, the battery light flashes amber four times, then a white, again and again.

  So bad, just battery has not locked in place correctly. I took out and put back and it seems fine.

• Yoga 2 Pro Dropping frames not in portable Mode

  For some reason any when I put the Yoga in any mode but the laptop mode, it will play videos smoothly. It happens with youtube and other actors of the web. As soon as I put it back in laptop mode the video plays well again.

  This can help. Dynamics of platform and thermal framework closing the question on the original Yoga.

  https://forums.Lenovo.com/T5/idea-Windows-based-tablets-and/Lenovo-Yoga-13-throttles-CPU-when-in-tab...

• Latitude E5420 mousepad does not work after update to Windows 10

  Hi guys,.

  I'm new here so be gentle! :)

  As the title suggests I upgraded my Windows 10 laptop and the mouse pad does not work alone I can't seem to find the drivers seem to relate to an update of windows 8? I entered the Manager of peripherals and updated drivers and it says I have the latest: - 8.1206.101.112 - Alps 02/06/14.

  I would be very grateful if someone could help, my system is running the 64-bit version.

  Kind regards.

  Select this option.

  Install manually a newer driver for the Touchpad (Alps) through the Device Manager has worked in many Dell systems that is not driver for Windows 10 CD-ROMs. Version 8.1206.101.118 has been reported to work for this model:

  http://dellwindowsreinstallationguide.com/Dell-touchpad-drivers/