15-4010nr spectrum: spectrum 15-4010nr Thunderbolt Firmware Configuration failed

Similar Questions

• P1102w firmware update failed

  Hello.

  I tried to update the firmware for HP P1102w, and he seemed to be omitted. After waiting for a long time, he ended up with the error message, "restart the power of the cycle, and then try again" or something like that.

  After that, he does not appear in my network, and I lost the web interface and the print function. My rounter does not show its presence. The printer has solid purple lights on the WiFi and the triangle of light.

  I tried to do a factory reset, but I could not find.

  I understand that the firmware has failed is critical. Someone knows how to fix this?

  Thank you very much.

  Hi ttanemori,

  Please connect the printer to your computer via a USB cable, and then restart the update of the firmware.

• BlackBerry Smartphones ARM11: Touchscreen firmware update failed

  Please I need urgent help.

  I have connected my 9520 Storm to my computer and blackberry desktop manager told me that I had an update. So I decided to update. During the update process, when he says to connect my camera to the JAVA virtual machine comes up with the following error.

  ARM11: Touchscreen firmware update failed

  Device error: 302

  Has no task: INPUT_SYS

  Files:

  Line: 0

  SP = 0X1784EAF0

  LR = 0X16119DD9

  PC-0X16118A90

  I tried to reinstall the operating system of all possible ways. From loader.exe, Office Manager, but I find myself coming back to this same error message.

  Please, I need emergency aid. Please...

  Hello SmoothRider,

  Thanks for the reply but I was able to get the ot to start work. I had the phone screen has changed, and immediately I put in the battery, that I was asked to reload the software I did and tadaaaa... It worked all fine again. I guess that the error had something to do with the material for the screen.

  Thank you

• The PS5000 firmware update fails

  Update firmware to 5.0.8 to any newer version of firmware PS fails!   Any ideas?

  I had to run the updates of the CLI,

• Firmware update failed, TC is now unavailable and no led light

  Found my TC this morning flashing yellow, found a FW update was available, clicked on update, downloaded FW but then he could not update and now TC is unavailable, I tried to reboot, but still no TC, before LED is off even on/after power on.

  How to treat?

  How to treat?

  Time Capsule 802.11n (4th Gen)

  The symptoms are typical of a Gen 4 TC... so thanks for putting this info in your profile.

  The new firmware is not the problem... However, the drop of water that makes the vase overflow. Your TC underwent a total failure due to bad soldering... the attempt of the update was this slight element of stress which caused the catastrophic failure.

  If you are a handyman, there is a fix... It of free... and set up to present enough to say that I am fairly confident with your symptoms, it will fix it.

  s/Apple-time-capsule-repair/GEN4-a1409-issues https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem

• HP first Firmware Update Failed (104)

  I heard that there is a new firmware for the HP award.

  I connected the calculator for the HP connectivity Kit.   It is an update for both the Connectivity Kit itself and for the calclator.   He managed to update the connection kit, but I can't update the firmware of the calculator.

  I'm on Windows 7 64 bit.

  My current firmware revision is: 2013 8 13 (5106)

  According to the new firware is version_20131125.

  I tried to restart the PC, using a different cable and another USB port.

  The connectivity kit seems to have a solid with the Calculator link because I can view/change settings, etc.

  After a failure the firmare update, I for trombone reset the calculator.

  Any help would be appreciated.

  Sorry in advance if this has already reported and resolved.  I did a search of the forum and have not seen everything about this new version.

  -TIA

  Hi!, gablinger:

  (1) charge the battery to 100%.

  Please, check this link... http://www.educalc.NET/2336439.page

• Tecra A10 - 1GW (PTSB1E) - update of the firmware & chipset failed

  Hello!

  in fact, I have two problems on my laptop (32-bit) windows 7:

  Burning programs do not find my burner (called 'MAT * a DVD-RAM UJ880AS' Device Manager) and even the [update of the firmware | http://de.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=DE&selCategory = 2 & selFamily = 5 & selSeries = 155 & selProduct = 809 & langua ge = 17 & selOS = 29 & selType = 50 & yearupload = & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = 12 & 1 7 = selectedLanguage & type = 50 & page = 1 & FROM = windows7 & ID = 68407 & DISO =-1 & driverLanguage = 42] cannot [find him | http://img705.imageshack.us/f/fehler2.png/]. Although the official web page of toshiba called mast * su * a, i belive it is the correct driver.

  Internal burning function Windows works _sometimes_ and disc playback as usual.

  Chipset driver updat doesn't work.
  The [error message: http://img827.imageshack.us/f/fehler1.png/] said 'requirements for the installation of this software is not met. the installation program is abandoned.
  I don't know, I chose the right driver.

  All attempts have been made under administrator rights and disabled antivirus.

  Thanks for help
  Tablerocker

  p.s.: the windows shortcut (just the shortcut!) + e works, too ([unknown error | http://img137.imageshack.us/f/fehler3.png/]). but I don't think it's a problem toshiba ;-)

  > Burning-programs do not find my burner (Device Manager named him "MAT * a DVD-RAM UJ880AS") and even the firmware does not find it. Although the official web page of toshiba called mast * su * a, i belive it is the correct driver.

  What is the status of the STRANGE in Device Manager?
  Are there any yellow exclamation marks?

  I recommend you remove/clear the STRANGE since the Device Manager.
  Then start the registry and delete the upper and lower registry key filters:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  After that, restart the device. Windows should recognize the STRANGE again.

  Regarding the driver chipset;
  The A10 - 1GW supports the Chipset mobile Intel GM45 Express.
  http://www.Intel.com/products/Notebook/chipsets/GM45/GM45-overview.htm

  If you use the driver from the Intel page, then you should try installing the chipset in Device Manager. This allows to force Windows choose the driver Intel

• Portege R400 - Firmware update fails for 3G card

  During the Firmwareupgrade of the G 3 embedded (expedite EU870D) in my protégé R400 card, I have a power fail. The next time you start, I can't countinue with the upgrade. The card no longer works.

  The Modem and the COM Ports, I don't see in Device Manager. Is there a solution for this error? Thanks for the help!

  Pumbkin

  Why do the update of the firmware?
  You should do this only if the Vodafone SIM card does not work properly!

  I found this info that pop ups before performing a firmware update!

  + Atten-tion of the FW update: +.

  + Please do not forget to read carefully before place the FW. +

  + 1. FW update is not necessary when the Vodafone SIM card works fine in the customer environment s. run the FW update only when the Vodafone SIM card is not detected. Please note that the FW is more reversible to the previous state once updated. +

  + 2. This upgrade tool will apply to the following models with built-in 3G module: +.

  + Portege R400 +.
  + Portege R500 +.
  + Tecra M9 +.

  + 3. Please leave 3G communication and close the connection utility before running the FW update. +

  + 4. Close all applications before you run the FW update. Please DO NOT launch any application during the upgrade process. +

  + 5. Please ensure that you use an AC adapter to power the computer during the process of FW update. Power failure during the upgrade process can lead to failures of 3 G modem. +

  + 6. Please DO NOT sleep/standby extended/Shut Down the computer during the process of FW update. This can lead in mode 3G +.

  So please first these points before you is trying to update the firmware!

• 6.2.5 firmware update fails on #25584267 RN102

  Can someone help me please. Official support section of Netgear won't since I did not have an expensive service contract. :-(

  I get a notification that a new version of firmware is available. When I try to perform the upgrade, the download is running and I am asked to reboot my device. After, it shows that always 6.2.4 version and a new version of the pop-up that is available is displayed again. Tried to swich off the unit and do a complete reboot will not solve this problem. Any suggestions?

  I sent you a PM.

  Definitely do not try a BONE re - install.

  OS re - installs should only be done when the data are available and support / another expert knows from experience that there is a high probability to solve the problem.

• HP9250C - Firmware update fails

  I work with a client with three 9250c Digital Sender.  We use the send to folder option and want to upgrade the firmware to make sure that the file name of the PDF file are always unique.  A technical note HP information indicates that we need 48.140.2 firmware or higher to achieve. See the attached Technote

  We have tried to install the latest firmware 48.293.1 via ftp.  The ftp commands indicate that the. The RFU file has loaded correctly, but when you return to the control panel of HP9250c that she went from 'Ready' to 'Suspended' but the firmware has NOT improved.

  The old firmware updated is 20070626 09.081.4

  Can anyone offer a solution to resolve the update.  I checked and the ability of the firmware update is enabled.

  Thank you Murray Croft

  Thank you for your comments.  You are absolutely right. I was finishing this work remotely and subsequently discovered that I had given the IP address of a 9200c rather than the IT Department of 9250c.  You're going to want to retry the upgrade today.  My apologies for the confusion.  Murray

• HP LaserJet 4250: Brick HP LaserJet 4250 after firmware update failed. Compact Flash card recovery options?

  While performing an update of firmware via FTP using cURL, the HP LaserJet 4250 I worked has frozen. I had no choice but to cycle the power and hope for the best, but unfortunately it was bricked. The screen no longer lights upward when turned on (although I can hear the internal working mechanisms which is a good sign).

  While doing some research, I read it is possible to buy a 32 MB CompactFlash card with preloaded firmware (http://bit.ly/1BTZGCh), put the jumper pin on the logic board to boot from it and then re-flashing the firmware on the card. Looks like a foolproof solution, but I would like to save my company some money if possible.

  I was wondering if it is possible to use a Type I, 128 MB Compact Flash card I have handy and load the firmware above myself using a USB Compact Flash card reader/writer. Judging by what I read on another post on the forum (http://bit.ly/1GR6nM7), it seems possible to use a Unix/Linux utility such as JJ to clone another job Compact Flash card with preloaded firmware. However, I don't have such a card to clone. What I have is another HP LaserJet 4250 in working condition.

  So that raises the question, is it possible to insert my own blank Compact Flash card in a HP LaserJet 4250 work and copy the firmware the logic board to the map image by using the printer control panel? I guess it would be the only way, if necessary, to get the firmware on the card.

  However, if she is not the only way, is there an easier way to get the firmware on the card? For example, can I just format the card in FAT32 and copy the file to the RFU firmware to it and start the printer from him? Or the use of HP does it's own file system that is not readable on a PC? Also, would it be possible to use dd and simply copy the RFU directly on the card device believed himself (no file system) and boot from that?

  Sorry for the barrage of questions. I tried to find the answers to all these myself, but HP doesn't seem to provide a lot of detailed documentation on works of the firmware via Compact Flash process. I'd be very happy if someone with experience could provide the answers well! Thank you.

  Looks like I'll be solving my own number here haha. So after bit peicing together information from different positions and some experiences, I managed to save my LaserJet bricks!

  To fix a HP LaserJet 4250 bricks, two things are necessary: an of Type I CompactFlash card and other HP LaserJet 4250 work. It's a common printer, chances are you'll find another around the office.

  Here are the steps to fix the printer:

  1. The card CompactFlash Slot 1 (bottom slot) on board the logical work printer. Instructions on how to do so are provided by HP here: http://bit.ly/1NNyIol
  2. (May be optional) Initialize (format) the CompactFlash card by following the instructions on page 327 of the repair of HP LaserJet 4250 (http://bit.ly/1D22T7R)

     (a) turn off the power to the printer.
     (b) turn on the power to the printer and then press and hold the MENU button when begins the memory count.
     (c) continue to hold the button down until all the lights on control panel three printer flashes once and then remain lit. It may take up to 10 seconds.
     (d) press the BACK ARROW button. The display should INITIALIZE the DISK.
     (e) press Select (mark). The printer initializes the hard drive and continues its power on sequence.

  3. Now that the CompactFlash card is formatted, it is time to copy the NAND of the printer to work on the CompactFlash card.

     (a) turn off the power to the printer.
     (b) turn on the power to the printer and then press and hold CANCEL when begins the memory count.

  
  (c) continue to hold the button down until all the lights on control panel three printer flashes once and then remain lit. It may take up to 10 seconds.
  (d) press the SELECT button (check mark).
  (e) press the MENU button.
  (f) use the arrow to scroll until you see COPY BOOTLOADER IN SLOT2.
  (g) press SELECT, and the cursor should get the word BOOTLOADER. Use the arrows to change this to NAND.
  (e) press SELECT, and the cursor should get the word SLOT2. Use the arrows to change this to SLOT1.
  (f) press SELECT. The copy process must begin, and the status will appear on the screen.
  (g) once the process is complete, turn the printer off and remove the CompactFlash card.
• Now that we have a working NAND on the CompactFlash card, it's time to restore to our printer masoned. Perform the following steps on the printer of bricks.

  (a) turn off the power to the printer.
  (b) Insert the CompactFlash card into Slot 1.
  (c) set the jumper on the System Board on the arrow to start from the CompactFlash card.
  (d) turn on the power to the printer and then press and hold CANCEL when begins the memory count.
  (e) continue now the button until all the lights on control panel three printer flashes once and then remain lit. It may take up to 10 seconds.
  (f) press SELECT (checkmark).
  (g) press the MENU button.
  (h) use the arrow to scroll until you see COPY BOOTLOADER IN SLOT2.
  (i) press SELECT, and the cursor should get the word BOOTLOADER. Use the arrows to change this to SLOT1.
  (j) press SELECT, and the cursor should get the word SLOT2. Use the arrows to change this to NAND.
  (k) press SELECT. The copy process must begin, and the status will appear on the screen.
  (l) once the process is complete, turn off the printer, remove the CompactFlash card and reposition the jumper to the default position.
  (m) turn on the power to the printer. That's all! Everything should work normally again. No brick no more!

UPDATE (07/04/15): IF YOU DO NOT HAVE ANOTHER HP LASERJET 4250

It turns out that you can just download the firmware on HP website and create an image of it bootable on a CompactFlash card. However, it is not as simple as just copying the firmware image. You should ignore the 633 first bytes of the file of the firmware (at least with the 08.260.1 version), then copy the rest on a CompactFlash card. You can accomplish this by running the following command on Mac OS X or Linux. Download and boot from a live CD of Linux like Ubuntu if necessary.

DD if = lj4240_4250_4350fw_08.260.1.rfu ibs = 1 skip = 633 of = / dev/disk2

Replace "lj4240_4250_4350fw_08.260.1.rfu" with the name of the appropriate firmware file and ' / dev/disk2 ' with the appropriate device if necessary.

If you prefer, a bootable copy of the revision of the 08.260.1 firmware can be downloaded here: http://bit.ly/1FeF3YP

As you can see in the image below, when opened with a hex editor, image downloaded from HP firmware starts with 1 b 25 31 2d bytes... However, the printer does not include the first part of the file when you start, because there are instructions of PJL and not binary. Bootable image begins at 631 byte (277 hex) highlighted. It may be possible that this address may change in future versions of firmware or for different printers, so here's how to know where to start the startup code. The first occurrence of 00 00 04 24 bytes, is where that starts. In ASCII, it looks to "... $". In this sequence, the 00 first is the beginning of the startup code. Here's another picture, of what should look like a bootable firmware image.

Non-bootable firmware image, downloaded directly from HP


Bootable firmware image, extracted of HP download



For fun, I unpacked it some of the files included in the firmware image, and it turns out that tracks on the printer to LynxOS. Who would have thought?

• Photosmart C4780: HP Photosmart C4780 Firmware Update Fail

  I downloaded the updated of the "C4700_FWUpdate_4362_HPCOM_v1" firmware, but every time I try to install the wizard says that my printer is not connected.  In fact, it is connected by USB cable and wireless.  I can print to it, printing and scanning doctor sees and checks that it is OK.  The HP Digital Imaging Monitor reports that it's OK.

  The printer is running its original software and works OK, except for the occasional low response to the control panel entries that this firmware update addresses.

  My Device Manager shows all the correct drivers OK and my control panel shows the printer OK.

  Any thoughts, please?

  You won't be able to reflash the firmware now. Looks like it is ready to be discarded. Time to buy a new printer, I'm sorry.

• Sansa Firmware Updater fails to install on my PC

  Hello world

  I can't install the update on my pc.

  This is what he wrote when it fails: "Downloding last sansa updater...»    X '.

  "The installation fails. "Please try again later".

  I have tried many times in the past 24 hours and its still the same.

  My pc is clean no viruses, spyware, etc., well maintained, firewall does not block it.

  Any suggestions?

  Most here do not recommend the use of the update. It's a resource hog that will slow your system down and nag-ware is most of the time as whenever you plug your player will be 'phone home' looking for updates. Firmware updates are not very numerous and widely spaced and manually updated (or reinstall) updates usually takes less time than downloading and installing the update.

• Sansa Firmware Updater fails to install every time...

  I have had my Sansa View for about 2 months now. I have never been able to install the Sansa firmware update. It seems to go through all the steps, then suddenly steps back on the "download the latest Sansa Updater" and says that failed (once just a second before this step was completed successfully). It seems to with success download it, install it, then save, then he can make another step or it may fail on the registration... I can't. All the steps after downloading disappear and now it says that the step does not and gives me the error message "Installation failed. Please try again later. "I think 2 months is much later...

  I am running Windows XP SP3 32-bit. The windows firewall is disabled and I use COMODO Internet Security and I use Avira Antivirus. I tried to disable the firewall and the antivirus just to see if they are the cause of the problem, but it has no effect on the results of the installation. In addition, COMODO logs do not show any activity blocked the Installer (or whatever it is blocked at all today). My account is an administrator account.

  Now, I think it should be noted that I don't need an update of the firmware. My player integrates the latest version from the website. What I really want is to convert my videos so that I can use them on the player. Unfortanetly there is no way to install the Sansa Media Converter without installing the Firmware Updater (ahh... how many times I tried wasn't the case... but alas...).

  Any help would be appreciated. Thank you.

  SOLUTION: I found a thread on the forum of Sansa View that describes the required parameters for the conversion of the video correctly to play on my device. (Here: http://forums.sandisk.com/sansa/board/message?board.id=view&thread.id=3300) Given that I don't need to update my firmware (and lets hope I don't) it is a perfect solution for me (especially considering the horrible things I've heard of the SCM).

• Firmware update fails

  I use a Fuze 4 GB with 8 GB external for about a month-, everything worked fine.

  I just upgraded my operating system from Vista Ultimate to Windows 7 Ultimate and the first time I connected my Fuze device the Sansa Updater is automatically called and I was informed of an update of the firmware. This has been launched but on clicking 'Finish' Windows indicates a failure of the device, my rocket shows a white, lit screen and is unresponsive, even when you are offline.

  The "rocket" stays with a blank white screen but does not power down, nor any other control reacts to this topic. When connected again to my computer sound connection is on, but the unit is not recognized - Windows reports (Control Panel > device drivers > usb controllers) "unknown device". No driver for the unknown device cannot be found.

  Probably the battery of the rocket will be finally exhausted and the display closed down, but until then I can't activated the device at all. How to get back a firmware to work in my camera?

  Thanks for any advice.

  Well, in the face of red. I posted in panic before I read the FAQ and found I had no press not delivery to zero (switch) long enough to restore. This made me return to a work unit.

  My apologies for a pointless post