15 - ac122tu: using laptop without battery connected to the unit

I use my laptop for almost 5-6 hours per day on a desk. Since I'm under it constantly for 2 to 3 hours, remove the battery from the camera so that the heat generated by the processor does not affect the battery life?

Hello

It is actually in your situation. If no power, then you will be ok BUT if power outage suddenly your machine may be dead in the water.

Kind regards.

Tags: Notebooks

Similar Questions

  • Pavilion 17-g173ca: use laptop without battery?

    When I bought this laptop a few months ago, the seller advised to remove the battery with power cord plugged. She said she would smoke less on the heat generated.  I wonder if this is advised.  If I remove the battery, I lose everything I'm working on.  I noticed it's hot, but not terribly so, and inconvenient, the vents are on the same side as the mouse.

    Where I live, it is not unusual for the flash output disabled for a second or two, if a storm is coming.  We have most of our serious electronics plugged into a battery backup, just for that purpose.  Unfortunately, we do have one for the laptop.

    I wonder if anyone out there has thoughts on this issue?  I would be grateful for feedback.

    There is some truth to what the seller says, but I think that far too much thought goes into the laptop batteries. Let it in and use it. Try to join a plan of handling of the battery will add very, very little in the life of the battery and that you wisely pointed out, the battery in a laptop is a UPS when used in a desktop mode. I say relax, set it and forget it.

  • HP dv6 Notebook PC ENVY: laptop without battery

    For the last few days I have been having problems of battery and planing to replace my battery in the laptop. I took it out on 39% and the laptop runs. I was wondering how long can I keep the laptop without battery. A replacement battery is on the way. Also, what is a good way to store a battery.

    magican18 wrote:

    For the last few days I have been having problems of battery and planing to replace my battery in the laptop. I took it out on 39% and the laptop runs. I was wondering how long can I keep the laptop without battery. A replacement battery is on the way. Also, what is a good way to store a battery.

    As long as the power cord is in the laptop is working fine but remember failure and the phone goes dead. A spare battery can be found on eBay just to use your HP part number and find a match to use. If that fails, they have guaranteed replacement here to remedy. Battery is best kept with the laptop plugged for the reason that it has been done. You will unplug it to consider somewhere and if it is not a battery and it is on it will be able to instantly. Is that reason laptop is a laptop for a reason.

  • HP PAVILION 15-ab029TX: with the HELP of laptop WITHOUT BATTERY

    EFFECT OF SUDDEN POWER OFF ON A LAPTOP WITHOUT BATTERY?

    THANKS FOR THIS DETAILED INFORMATION.

  • my laptop won, t connect to the internet more without the ethernet cable, help attatched

    As I, ve said it won, t connect unless the cable is connected.

    I had to change the password for internet security to allow my new Apple iPad access to the internet, 3 days after my laptop refuses to connect to the internet.

    I, made the change of the password in my laptop security settings, but after I pressed ok, apparently the password returns to that of origin and isn, t recognized. Can someone help, please

    Hello

    Thanks for posting your query in Microsoft Community and thank you for the opportunity to help you.

    From the description of the problem, it seems that you have difficulty to connect to the internet without Ethernet cable.

    To help you to propose measures to solve the problem, I would appreciate if you could answer the following questions:

    1. you receive an error message or error code?

    2 did you do changes on the computer before the show?

    I suggest to follow the steps in the article mentioned below and check if that helps.

    Why I can't online?

    http://Windows.Microsoft.com/en-us/Windows-Vista/why-cant-I-get-online

    You can also see the following article for more information on Internet connection problems:

    The problems of Internet connection

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

     

    Hope this information helps. Answer please if you have any additional questions about the problem you are having and we will be happy to help you further.

  • Laptop does not connect to the internet, office. Both use the same router. Tried troubleshooting, does not. Help!

    I have a desktop computer and a laptop. Both use the same router. The laptop does not connect to the network, but the office has no problem. My wireless adapter on the laptop is on, I tried troubleshooting. I tried to turn it off for 30 seconds then restart him. But nothing is resolved the problem. Any ideas would be helpful! Thank you

    Hello

    Maybe this can help.

    These steps and tell us where is the breaking point.

    Check the Device Manager for the wireless card valid entry.

    http://www.ezlan.NET/Win7/net_dm.jpg

    If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

    Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

    http://www.ezlan.NET/Win7/net_connection_tcp.jpg

    Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

    ----------------

    Make sure you firewall No. preventing / blocks wireless components to join the network.

    Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

    If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

    ---------------------------

    Stack TCP/IP work should look like.

    Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

    http://www.ezlan.NET/Win7/status-NIC.jpg

    Description is the data of the card making.

    The physical address is MAC of the card number.

    The xx must be a number between 0 and 255 (all xx even number).

    YY should be between 0 and 255

    ZZ should be between 0 and 255 (zz all the same number.)

    The date of the lease must be valid at the present time.

    * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

    * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

    ---------------------------------------------------

    A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

    Above everything is OK, you must be able to connect to the router.

    Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

    If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

    Enable security wireless after you eat to make a functional connection.


    Jack-MVP Windows Networking. WWW.EZLAN.NET

  • I read online that you can use you Photoshop CC without being connected to the internet. How?

    I read online that you can use you Photoshop CC without being connected to the internet. How do you do that? There is a shortcut on my desktop, but it opens the connection online. I would like to use the program when I'm not connected to wifi. Online, I can see that it is possible, but nobody explains how. Just that it can be used in offline mode. How can I do this?

    Please see "do I need to be logged in to access my desktop applications?" section of Creative Cloud help | Creative cloud / Common Questions

    Hope this will help you.

    Kind regards

    Hervé Khare

  • HP laptop could not connect to the netgear N600 router secure

    New laptop HP MAY connect to the Netgear N600 dual band router if NO guarantee is enabled, but it cannot if security is enabled on that either WPA, WPA2, WPA2-PSK regardless.  It can connect too well if wired (of course).

    I reloaded the drivers and all the usual remedies but not joy.  Also I tried using a USB WiFi adapter with the same result, unable to connect with security enabled.  All other devices connect very well including 2 Iphones, Tablet android, Apple TV, Apple MacBook pro, printer, etc. then it does seem like a router problem.

    Laptop is slightly, around the age of 6 months running Windows 8.  As a temporary workaround I disabled DHCP, security and peripheral isolation enabled 2.4 ghz radio router static address then attributed to the laptop, not a lot of security, but that's all I have.  I moved all devices except a (2.4 ghz only) iphone on the active side of 5 ghz on a different SSID with WPA2.

    It seems that the OS has a problem with the hold of encryption in the stack, or maybe it's a hardware problem.  Whatever it is, it works very well with an open WiFi but died completely when any type of security at all turned on, same WEP.  I arrived at the end of my knowledge here and short of a relatively new machine of retirement or try a full reload of the OS (Win 7 X 64 use), I'm stuck.  It is the only system to win 8 I worked (OS nasty if it is).

    Any ideas or suggestions?

    I know it's late, but there are probably people searching on the net because of this problem just as if I were stupid. I got a new laptop Windows 8.1 and plugged into my router to set up. Worked without problem. I unplugged the ethernet cable and jumped on the wireless, typed in my network key and hop, connected with no internet access or other useful functions. Long story short, eventually work was by using the automatic connection on the router (the one at the bottom that looks like a radio with 2 waves coming out of it) to connect the first time instead of manually typing the password.

    You will need to clear your computer auto-enregistré on the network so that you leave cool to do that. At least, I assume that. My laptop has a dual band wireless card, so I just shot on 5G and serves as my network "expenses. After he successfully connected to that one however, my laptop is now having no problem with the 2.4 G which was faulty in the first place.

    Who knows why he can be configured automatically, but don't let you not type the password yourself. In any case, I hope this helps someone!

  • Lenovo Y50 only using Intel graphics when connected to the TV with HDMI output

    I recently bought a Lenovo

    you right click on the exe of the fricken game and select 'use nvidia? !!!

    I'm doing it right now with my laptop computer and connected to the tv and it works with my nvidia card... I can also say his work because of the small icon in the lower right... See the photos...

  • Laptop does not connect to the internet. error cannot display Web page

    Original title: laptop does not connect to the internet. How can I fix it?

    I'm trying to get my laptop to connect to internet, but it will not. It keeps telling me that it cannot display the Web page. The wireless connection is the link and he sees the laptop, but it's like he goes. How can I fix it? Help!

    Hello

    1. Have you tried using anythird party web browser to connect to Internet?
    2. You use Internet Explorer to surf the Internet?

    If you receive error message cannot display Web page in Internet Explorer, then you can check the link below to fix the problem.

    "Internet Explorer cannot display the webpage" error when you view a Web site in Internet Explorer

    http://support.Microsoft.com/kb/956196

    Note:

    Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  • Can I get an update for xp home edition 2002 to my computer without being connected to the internet?

    Can I get an update for xp home edition 2002 to my computer without being connected to the internet?

    Hi SelenaMR,

    Are you facing any problem to install updates?

    In Windows XP, it is not possible to update Windows without an internet connection.

    Windows Update uses your internet connection to find updates on the Windows Update Web site or on the Microsoft Update Web site that apply to your computer.

    Reference: Windows Update

    Hope the helps of information.
    Please post back and we do know.

  • Is it possible to read books Kindle app without being connected to the internet.

    Is it possible to read a book on a Microsoft Surface using the Kindle app without being connected to the internet?

    Hi Angela,.

    If you have downloaded books, you can read them offline. You will not be able to read books that are not downloaded. You can also contact the support of Kindle app for assistance: http://apps.microsoft.com/windows/en-ca/app/kindle/1d7e4396-0143-4aed-8892-84eb75e799f3

    See also:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_rt-Winapps/cant-read-Kindle-app-offline/b21e851f-ac57-4004-A30B-92cde11c0e89

    It will be useful. Back to us for any problem related to Windows. We will be happy to help you.

  • Can I use PXI embedded controller connected to the PC under LINUX operating system

    Hi all

    We ara tries to connect to PXI8106 (in 1042 chassis) to PC under LINUX via ethernet (cable cross at the moment), is the version of labview 8.5.

    Can I use PXI embedded controller connected to the PC under LINUX operating system?

    If Yes, where can I find its configuration in the .ini file?

    Thanks in advance.

    Hello bachir_elec,

    I'm sending you two links that I don't provide the information you need.

    Using Linux on an Embedeed PXI controller:

    http://digital.NI.com/public.nsf/allkb/821E0C115A3B4EF286257069004B8352?OpenDocument

    Configuration of your PXI Linux system:

    http://digital.NI.com/public.nsf/allkb/5CEEC941FB7B0488862573F700653B21?OpenDocument

    You can take a look?

  • I have a problem with my laptop does not connect to the internet. It connects to our wireless very well, but it doesn't have an internet connection.

    I have a problem with my laptop does not connect to the internet. It connects to our wireless very well, but it doesn't have an internet connection. It connects to other networks wifi very well with Internet access, is that the wireless in my house what it connects to. When I diagnose the problem, it says "Cannot communicate with DNS server (208.67.222.222)", and then under that it says: "languished network diagnostics remote hosts, but had not received a response." It connects to the Internet through an ethernet cable, but it is rather annoying pulling the cable autour. I currently have Windows Vista Home Premium. Thank you!

    original title: Internet connectivity problem

    Hello

    Now, you may need to contact the support of Panda Internet Security centre to change the settings so that wireless is enabled through it.

    Support link: http://www.pandasecurity.com/homeusers/support/

  • Exchange server and Surface RT, can I use Mail app to connect to the Exchange Server for email (the same question is for contacts or people and calendar)?

    Hello

    Our company uses an Exchange Server for email, contacts and calendar.

    Can I use Mail app to connect to the Exchange Server for email (the same question is for contacts or people and calendar)?

    Kind regards

    Matej

    You must install the SSL certificate before connect you to the Regional service, the easiest way is to go to "desktop" IE10 open, go to the exchange server web access page, click on the notification of "certificate error" red and view / install the store "certificate authorities roots of trust." Then, make sure that your surface RT complies with the minimum requirements of security then connect to the exchange via the mail application server.

Maybe you are looking for

  • Satellite Pro L10: where can I get a better graphics card

    Hey I have a Toshiba Satellite Pro L10 and I was wondering if and where can I get a better graphics card for it? Thank you very much

  • Re: Equium P200-178 - what CPU for an upgrade?

    Hello I have the number piece Equium P200-178 PSPB2E-001002AV at the moment with Intel® Pentium® Dual - Core Processor T2080 1.73 GHz 533 MHz, I'd like to upgrade but that I can safely go with? I think im after the same socket as it is Socket M but h

  • Duplication of images

    I just bought lenovo laptop Z570. Configuration: i5, 4 GB ram, I GB nvidia, dos mode... Bit installed windows 7 ultimate 32... installed all the drivers including Intel graphics & nvidia graphics... What bothers me is that images of other part of the

  • Envy 17 J - 1103cl: USB Driver for controller XHCI USB family of chipsets Intel 7 series/C216

    I just bought for a rebuilt HP Envy 17-J1103cl that have no operating system installed. I installed Windows 7 64-bit... which accompanies the laptop driver cd was... I installed all the drivers from the cd, but still not get my USB ports to recognize

  • Cannot open the program after you restore the backup of the files.

    original title: problems of recovery program I had to do a system recovery. When the files have been restored from the backup made on to the DVD-they do not repopulate the original sites, that is to say the restoration has created a section of progra