Lenovo Y50 only using Intel graphics when connected to the TV with HDMI output

Similar Questions

• Sound does not work when it is connected to the TV with HDMI

  I have a HP Pavilion Notebook PC, DV7 - 6813EV, running windows 7 Home Premium 64-bit SP1. My problem is that I have no sound when connected to my TV HDMI connection and press. Please could someone help me? Thanks in advance

  Hello gematz,

  The sound does not work when it is connected to the TV via HDMI.

  Go to start.

  Type sound.

  Click sound

  On the playback tab, click with the right button on the HDMI interface, and then select set as default device.

  If you do not see the HDMI, right click and select devices see off, then set as default.

  I would like to know how everything goes.

• Satellite A500 - 15 M: unable to connect to the TV with HDMI

  Hello

  I have a Satellite A500 - 15M. I recently tried to connect to my TV so I could watch certain shows online on my Hannspree Xv HD ready TV.
  The HDMI out does any record on the TV - the TV displays a message "not supported" and remains off (as if there is no signal) - display settings on the PC it does not recognize the TV... actually it [Intel Graphics and Media Control Panel] indicates that the TV/monitor settings are not supported.

  But I can connect via the VGA output - although I have to delete the display settings to 1024 x 768 to show on TV. In addition the display on the TV then is mainly pink and red, even if my pc display peak is most often blue. -start of the Toshiba screen displays on the TV, without any problems and one or twice the login screen was displayed too much, but then sometimes it isn't...
  I know that's not the VGA cable as I can connect to the TV with it on netbook advent my wife without any problem.
  Are there drivers, I need to update / download? Or I need to change the settings?
  How can I get my screen on my TV?

  Any help would be greatly appreciated. Thank you

  Hello

  First, you must connect the two machines (laptop and TV via HDMI) when the two devices are turned off. After turn on the TV and the laptop.

  You must choose the HDMI on TV channel and should then use the FN + F5 key combination to switch the video output to the TV.

  If this does not help, try updating the graphics card driver.
  It seems that your laptop supports the Intel graphics chip. Therefore, you can see the Intel page for new drivers.

  Welcome them

• Portege R930 - BSOD when connecting monitor high resolution with HDMI port

  Hello.

  I have a Portege R930 (pt331a-01w001) running Windows 7. All about the laptop works as expected, however, when I connect the laptop on a screen high resolution (2560 x 1440) via the HDMI port, I get a blue screen of death.
  Can I use the HDMI port to connect my 1080 p LCD TV and my monitor to work which is a lower resolution and it works well.

  I tried several cables and different monitors of the same resolution.

  If anyone can help?

  Hello

  Simply said: the laptop not breaks down using external monitor with a less than 2560 x 1440 resolution. Right?

  Find your laptop model.
  [Portege R930 PT331A 01W00101 | http://www.mytoshiba.com.au/support/computers/portege/r930/pt331a-01w00101/specifications]

  and it seems that the device supports the Chipset Intel® QM77 Express and Intel® Graphics Media Accelerator QM77

  I recommend updating the graphics card driver.
  You will find the page of the Toshiba Intel display driver v8.15.10.2712 (Win 7)
  Also, you could test the version downloaded from the Intel page.

• Connection to a TV with HDMI output with a Dual-Link DVI adapter

  I have two monitors connected to my MacPro late 2013, an HDMI port and the other on the Minidisplay port (with a Mini DisplayPort to DVI adapter). Then I have a third monitor used for dubbing tracks, (22 in.) connected to an another mini display port with a Mini DisplayPort to Dual-Link DVI. Now, I don't want to connect to the Dual-Link DVI adapter a led TV 40 "in replacement of the monitor 22 '', so that I can make the tracks of dubbing in a better way. But the led TV has a HDMI port. The question is: can I connect the TV led to the Dual-Link DVI adapter, simply using an adapter DVI to HDMI? It work?

  Not used that exact configuration but should work.

  See here to ensure that you do not overload a single BUS:

  Use multiple screens with your Mac Pro (end 2013) - Apple Support

  Al

• Connect to the TV with HDMI to HDMI connection

  I'm trying to connect my HP Touchsmart 600 (oem Win 7) to my Samsung 850 HDTV using the HDMI connections. Both devices (PC & TV) do not even each other. Do not know how to proceed. Any thoughts there. I though it would be simple to s cable and go.

  The port hdmi input graph based solely on a call back from HP support. It's disappointing because I had two HP tell me that it was an hdmi output.

• Problems with sound when it is connected to the TV with HDMI

  When I connect my laptop to my tv with the HDMI cable everything is fine display wise, but when I go to netflix and watch a movie instantly the sound comes only from the laptop. All other windows sounds come through the TV speakers. Any solution?
  Sony VAIO Windows Vista laptop. Model is VGN-NW150J

  Hi RayBeaudry

   

  Follow the steps below and verify that the default audio device is correct-

  a. click Start type sound in the box start the search.
  b. click on his research at the top of the start menu.
  c. click the read tab notice the check mark next to the default device. For the most part
  users, the default device's speakers.
  d. Select the audio device output digital (HDMI) device to set as audio device as the default, and then click on set as default.
  e. click the Properties button, and then select the levels tab and make sure that the volume
  is at 100 and not cut.
  f. click OK to save your settings and close the sound dialog box.

  Check the link for assistance on the question below
  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-a-microphone-music-player-or-other-audio-device-to-your-computer

   

  I hope this helps.

• printer is not found when connected to the router with the ethernet cable

  My c6280 used to print wireless (not a wireless printer) because I had hooked to the router.  Now, it won't work - I'm on Mac OSX Lion.  I tried to delete the printer and reinstall.

  Hello

  Please make sure to remove the software completely, because there is no plans for Lion.

  While the printer is connected to your network,

  Go into System Preferences > print & scan and click on the sign more.

  Select your printer and the driver will download automatically the Apple software update.

  For more information, you can follow the document below:

  http://support.HP.com/us-en/document/c02911238

  If the update fails to install Apple servers, download and install the package of the latest version of the HP to Spple printer software:

  http://support.Apple.com/downloads/DL907/en_US/HewlettPackardPrinterDrivers2.7.2.dmg

  After completing the installation, add your printer as explained previously.

• My computer can not VAT registration and access the internet when connected to the network [secure] through wireless.

  Original title: fix problem 'local only' what is wireless.
   
  -My computer is a HP Pavilion dv5, running windows vista edition Home premium

  -My computer can identify and access the internet when connected to the network through a cable.

  -My computer can identify and access the internet when it is connected to the grace wireless network [without warranty].
  -My computer can't identify [unidentified network] and [room only] internet access when it is connected to the [secure] grace wireless network?
  -Other information systems, identify and access the internet when it is connected to the [secure] grace wireless network.
  -J' confirmed the network, try password works in "safe mode with network", manually configured (TCP/IPv4) using a connected computer.
  S ' Please, I'm desperate and in urgent need of help.

  Hello

  1. If it works well before?

  2 have you made any changes to the computer before the show?

  Method 1:

  You may experience connectivity problems or performance issues when you connect a portable computer that is running Windows Vista or Windows 7 to a wireless access point:
  http://support.Microsoft.com/kb/928152

  Method 2: Uninstall and reinstall the network adapter drivers.

  Follow the steps mentioned.

  (a) click Start, right click on computer.
  (b) click on properties, click on Device Manager
  (c) expand the network card, right-click the wireless adapter option
  (d) click on uninstall
  (e) now go to your computer/wireless device manufacturer's website, download the updated drivers and install them.

  Follow the below mentioned article:
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

• computer not automatically standby (formerly titled "impossible computer automatically sleep when it is connected to the internet with modem cable")

  Hi, I noticed recently that my computer (Windows XP Media Center Edition 2005) is unable to sleep automatically when it is connected to the internet with a cable modem. Change the settings for my current power mode and try a different feeding regime (diagrams of Windows XP default power and power management, I created) only solves the problem for 2 days at most. I also tried to change the settings for the other power plans mentioned, and yet once again, the problem was only set for two days at the most. I also tried turning off my computer, restarting my computer, recording Powercfg /Restore Default policies in Run, saving sfc/scannow in Run, and again, I got the same result. Reset and power cycling the modem cable is not helped either. To help you better understand the problem, for example, if I had the date set for the screensaver set to 1 minute, the time for the monitor to turn off set to 2 minutes and time for your computer set to 3 minutes, the screen saver activate after 1 minute, the monitor turns off after 2 minutes, but the computer would not sleep mode after 3 minutes , even after an hour or more. I tried to check the Task Manager, and I have not noticed any process that would be interrupting the day before. However, I noticed that when I turned on the monitor by moving the mouse, even when the computer was unable to sleep and unplugged the ethernet cable from the cable modem and waited, the computer has entered standby as it should have.  I tried to find a solution for more than a week, contributions for this issue would be greatly appreciated. Thank you for taking the time to read my post. (Update: it seems that the problem is something else then my cable modem.)

  Hello

  Thank you for the update.

  This behavior can occur because of possible conflicts of third-party software, which includes the third-party security software.

  You can also temporarily disable third-party security software and firewalls installed on the system and check the issue.

  If disabling the antivirus software solves the problem, you may need to configure the settings of the antivirus as a result program. Please contact the software vendor for assistance in this regard.

  Note: be sure to enable the security software on the computer after checking the issue.

  Note: When you perform a clean boot, you can activate services for the modem, network card and disable third-party services to check the issue.

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• No pavilion dm1 sound when I connect to the tv via hdmi

  I put the HDMI as audio by default output when connected to the TV and have no sound.

  I've updated the Bios, graphics and driver sound but still no joy.

  Here are the details of the laptop if it helps...

  No. A2D08EA #ABU

  Serial number {removed privacy}

  Display graphics card AMD Radeon HD 6320

  The Windows 7 32-bit operating system

  All sorted now and works great

  After the recovery to factory settings, I tried connecting via HDMI on my main TV (Plasma LG 50PC1DA) and it still does not work... Tried another HDMI cable and still no joy with the sound.

  Tried the DM1 on two TVs (Samsung LE40R74BD of LCD and a Panasonic Plasma TH-42PX8B) and everything worked fine... Was not what anyone defined as default... Just connected via HDMI cable and all was fine...

  Hope this helps other users having the same problem

  Now for a couple of beers

  ATB Kev

• I installed a new router (Netgear N300) wireless and my laptop is the only computer that does not connect to the internet.

  Connected to the new router, but locally only.

  Currently, I installed a new router (Netgear N300) wireless and my laptop is the only computer that does not connect to the internet. The small icon to the left of my screen says only: ACCESS: LOCAL ONLY.
  BASICALLY,.

  I have Windows Vista Home Premium, notebook Compaq (Presario CQ60 to be exact)

  I can connect if I use a cable, but its disadvantages.

  I can connect wirelessly with my PC and Ipad. and Internet access.

  I TRIED:
  Various patches microsoft such as resetting TCP, safe mode with network, reset the router. »

  Thank you in advance and we hope you can answer this soon!

  I use an Atheros AR5007 802. 11 b / g WiFi Adapter(Compaq laptop) for the moment so this is useful. Thanks again!
  Someone suggested that I update my wireless driver. I am open to this idea, if anyone can find a safe and legal site with the download.

  Hi Bryyaan11,

  You can check out the link to HP support and try to download the drivers for your wireless card updated:

  Support HP & drivers

  For more information, you can also consult the following article:

  Updated a hardware driver that is not working properly

  You can also check the following items and try the steps:

  Windows wireless and wired network connection problems

  Solve problems, find wireless networks

  Hope this information is useful.

• Pictures of blackBerry Z10 BB Z10 disappeared when connected to the PC via USB Phone model z10 STL 100-1

  Help on unit Photos and videos not Visible when connected to the PC via USB. I also tried to restart and reinsert the SD card but no response what happens each time I take pictures and try to transfer to the pc via USB please help to recover the photos suggest something?

  ampawase wrote:
  Help on unit Photos and videos not Visible when connected to the PC via USB. I also tried to restart and reinsert the SD card but no response what happens each time I take pictures and try to transfer to the pc via USB please help to recover the photos suggest something?

  "A wireless connection with the mixture, use the file manager, hold Media Card - Photos - 'Shift' or ' Ctrl ' key - select thumbnails - right-click - Save slot - selecting a folder on the pc and save them.

• Why can't I access the modem 192.168.1.1 when connected to the wireless router?

  I'm unable to access my DSL Modem 6100 Westell using 192.168.1.1 when connected to the Netgear WNDR3400 wireless router. I can access it, however, when I connect directly to the ethernet port on the computer without going through the router. I've set up according to the instructions. Is it possible to correct the problem?

  This isn't a problem.  This is the standard behavior.  You are connected to the side LAN of the router that is isolated from the side WAN (uplink).  This is the mode of operation of routers.

• Hide the username / password when connecting to the database

  I need to find a way to hide the user name / password when connecting to the database (via a script), or by encryption or any other method that hides this information when I connect to the database.

  I use Oracle 11 g.

  I tried with the portfolio method, but could not connect to the database of the error below, even the user name and password:

  ERROR:

  ORA-01017: invalid username / password; connection refused

  I plugged this way (after the cover configuration):

  sqlplus /@DB

  Please help me.

  Concerning

  Luiza

  Hi Luiza,

  Try to find out why the portfolio method does not work, check the implementation using ref 340559.1 Note

  Check also for example client and server versions / compatibility, evolves sec_case_sensitive_logon relevant parameter (as a test, because it must be true) etc.

  Greetings,

  Damage ten Monkshood