15 - B137TU can't see BIOS / POST on HDMI

Similar Questions

• Can't see bios

  Hi all

  Help, please!

  I think that I have problems with the PCI Express card, I went into the BIOS and chose the on the graphics of the disabled the option PCI card. Now when I boot I just get a blank screen to watch! I don't remember exactly what I did because I can't see the BIOS screen.

  My PC is HP Media Center m7000 m7755UK version. CZX707MRSJ S/N, running VISTA

  Thanks in advance for any help.

  Hello

  Your PC is listed as having a 300W Power Supply Unit, which does not limit the choices a bit.  However the Nvidia GT440 specifications would be Ok with this and an example of the map is available here.

  The only thing that I would recommend when ordering this device or a similar card is just to check with the retailer that the card is suitable for a PC with a power of 300W specifications vary.

  Kind regards

  DP - K

• Can't see BIOS UEFI more Windows 8 after formatting hard drive

  After formatting my hard drive, I don't see the opportunity to get into the BIOS/UEFI firmware anymore. It has disappeared from the troubleshooting Windows 8.1. It happened because I had to reinstall Windows because I wanted to put Windows on the SSD drive, that I adapted. Firstly tried to transfer files to Windows from the HARD drive that went successfully but my problem was trying to get the HP BIOS so he can start, he had no option as I saw in the other BIOS, select the name of the SSD drive and turn it on just for 1 St boot, (the SSD has been installed properly so she did state in the BIOS on other things and in the windows to) the only thing that he had in this BIOS is a command to start menu I dragged the SSD to the first boot. Windows restarted and it wouldn't boot from SSD yet, so I put it in legacy mode that came to the top with my SSD info to start first, but when I saved these settings and rebooted Windows it says has no disc or can't find windows. So that's how I got where I am now and had to reinstall Windows to get it working again. Can't find away to get the BIOS/UEFI on windows 8 Troubleshooting menu option more?

  Hello

  The way most simple and easiest way to solve your dilemma to use the HP recovery media to build on the SSD system use the same SATA port that is used by the original Windows 8 boot drive. I know that this procedure works, at least on the PC that I used.

  I'm not a fan of 'cloning' of hard disks to boot HP UEFI active.  There are simply too many problems. Using the HP with a SSD recovery holder sized to accept all the original HP recovery system. This includes not user data. Then use your original hard drive as a device of emergency start and space remaining for the storage of data.

• NB100 - can't see the SD card in the BIOS

  Anyone know why I can't see my 16 GB SD card in the bios?
  It loads up as sdb1 when the computer is started, if it is recognized as a hard drive.

  Have discovered that it is the standard for many of the Atom based Netbooks. Still don't know why

• Seagate drive in the BIOS but can't see it in the file manager

  Earlier this week, I installed a Solid State Drive as my boot drive. It works very well. I want to use 2 TB Seagate that came with my Inspiron 3847 as backup devices (slave) and I also want to take 10 Windows out of it. I can see the drive in device (drive 1) Manager and in the BIOS (SATA 2), but I can't see it in the file manager so I can reformat the drive. This particular model (ST2000DM001-1ER64) has no jumpers to set it as a slave drive. Seagate said it is automatic. I am stuck as to how I solve this problem. Any help is appreciated. Thank you!

  Hi ssd user,.

  Happy new year!

  There is no such thing as master or slave with SATA drives. Try to go to disk management, search your drive and check if a drive letter has been attributed to it. I suspect that you must select a drive letter, then it should appear in the file Explorer.

• I can't see e-mail messages about my local folder on the drive location. Paranoid.

  I am moving pop, IMAP and in the process try to archive many messages in not-very-active topics/folders to my local files. All this seems to work _great_. My messages are archived just where I expect to be, and I can see _in Thunderbird_.

  But, when I go to the location of records them attest to 'Browse' in the account settings for local folders, I can only see .sbd files. These sometimes have subfolders for _some_ subfolders in my local folder structure (but not all). I see no message. In some cases properties indicate that the folder has a size large.

  BUT I want to be able to leave with my e-mail address if something goes wrong. Where are my emails? How can I configure T-bird so that I can be comfortable that they will survive the disappearance of the T-bird, or some other misfortune (assuming I have back up.)

  Thanks in advance.

  Re: try to check many messages in not-very-active topics/folders to my local files.

  So you are not checking them in the sense of using the archive feature. you just create folders in the "Local folders" account and penetrating the files out of the emails Pop e-mail account.

  Please provide the following information.

  First check that you have this set:
  View > folders > all the
  or
  Icon of the menu > folders > all the

  • Then after a picture of the folders pane, so that we can see your "Local folder" and all the files in that account.

  Can make folders and hidden files visible:

  • http://KB.mozillazine.org/Show_hidden_files_and_folders
  • Help > troubleshooting information
  • Click on "view the file.
  • Click the folder "mail".
  • Click on "records the.
  • Post a picture of the Local content folder.

  If you have created files in a folder (subfolders), it creates a file with a .sbd extension.
  Thus, for example, if the Inbox subfolders, then you will see an Inbox.sbd folder.

  • Click the *.sbd folder.
  • Please post image in the folder *.sbd, display the contents of the folder.

  If you have more than one + .sbd file, please post images to display the content.

• Can not see the Forum Signature

  The whole issue is that I do not see the image I created for one of my signatures. I find this strange but because it's only MY signature in this particular forum (the official Sims 3 ones) that I can't see. I see everyone, and I don't have this problem on another forum or website. However, I can see the signature when I look at the forum using my phone or another browser on my computer. There is this: the signature will appear suddenly after that I have post a photo in a real post, but as soon as I refresh the page or go to another, a large white space will be where my image is supposed to be. I asked others, and they all say that they can see it properly. I tried to reset Firefox, but it changed nothing.

  There have been problems reported in Firefox with images stored on Photobucket.
  
  Would be easier to host images with another image, hosting company.

  This issue seems to be caused by the default value of text/html Firefox sending accept header instead of an image request and this causes Photobucket redirect to a HTML page with the image and not the image that is requested.

  • [981195/questions/981195]

• I can't see the screen to resize, so that I can let it slide, or make smaleer top, bottom, left side or the right side. I need to do in order to

  Impossible to move the screen image. I fly over the edge of the arrow of the mouse to drag the inside of the screen and it won't work. Neither left nor right, neither the top or bottom. I have to be able to do this because my monitor has an error of graphics on the right side of the screen-screen covering about two inches of width of the length of the right side of my window screen image, so I do not see where to put my mouse cursor to scroll vertically. In addition, sometimes I want to remake the image of the window longer or shorter, and I can't do same. It seems that it is a matter of "settings". Just do not know how to activate it. Help, please.

  See next post

• Can't see the new masseges

  I'm not sure where I need to post

  I have windows 7 64

  When I get massege someone I can't see my massege and it take me in the middle of the conversation.

  When I get some new massege someone it take me again in the middle of the conversation.

  Skype uses the local time of the computer to label messages and now everything is messed up.

  The only one you can do now is to clear your whole cat or attempted to correct the incorrect timestamp using 3rd party applications.

  http://community.Skype.com/T5/the-Skype-lounge/delete-a-conversation/m-p/743928#M56527

• Satellite A200-12 x PSAECE: can't see the STRANGE in my computer

  Hi all

  After using my toshiba recovery cd, I lose the CD/DVD-ROM drive, what's wrong?
  The laptop works fine, except that on this issue, I can't see the drive on my computer and equipment, and if I press the eject button I have no answer to the reader, even the amber does ' t see the light.

  I have Toshiba A200-12 x PSAEC (PSAECE) with Windows Vista 32 bit.

  Hope someone can help me please!

  Thank you

  Hello

  I think that Akuma means remove the STRANGE of the Bay of notebooks, then plug it in again.

  In any case, in my opinion you should first check if the reader of CD/DVD (ODD) was recognized in the BIOS, and maybe you can also try to boot from the CD/DVD drive to check the functionality.

  If it will work, the connection is ok.

  In this case, I would recommend removal of the upper and lower registry filters.

  Check the MS doc for more details:
  http://support.Microsoft.com/kb/270008/en-us

  Good luck

• Satellite P100 - 387 (PSPA3E) - how can I see the full 4 GB of RAM?

  Hello.

  I installed 4 GB of RAM (2x2gb) on my laptop. After that, I see in the BIOS (version 4.40) 4 GB, but 32 bit of openSUSE 11.1 OS I see only 3 GB. I know that 32 bit OS does not support the 4 GB of RAM.

  I try to boot from openSUSE 11.1 x86_64 live CD and can see only 3 GB of RAM.

  How can I see full 4 GB of RAM?

  And what is shown in the BIOS? Total amount of 4 GB?

• suddenly iTunes can't see/play existing TV series and movies (m4v files)

  Day before yesterday, I could see and watch different episodes to see the TV and movies that I had previously purchased on the iTunes store - some downloaded some last week, a month or two ago. I'm literally in half way through some of these TV shows.

  Today suddenly iTunes (12.3.1.23) can not see/play these files. They always appear in iTunes 'as if' they are playable, but try to play one of them doesn't that opens a blank screen. Trying to manually open these files from the finder m4v doesn't show even iTunes as an 'Open with' option. They will not open with QuickTime, VLC, or any other application video game I have.

  Nothing has changed except that I installed an OSX update to the security of the system for Yosemite two days ago. I've not updated iTunes, I have not moved to El Capitan again, and as far as I know I am no changes to m4v files.

  All solutions?

  Sometimes just logging on iTunes, reboot your Mac and when you log in to your iTunes account has solved some problems of reading. In addition, update to the latest version of Yosemite 10.10.5 If you don't have it already done. It would be useful to also post a screenshot of the "Get Info" of one of those m4v files window.

  Never mind, looks like this is one common problem that others know as well after reading through other messages regarding this problem of reading. I hope that Apple will release a fix soon or someone else will come with a workaround until the next update.

• How can I enter BIOS compaq610 screen and set the date, time

  How can I enter BIOS compaq610 screen and set the date, time

  Hello

  See Page 94 or Page 100 (according to what's relevant) of your & Maintenance Guide.

  Kind regards

  DP - K

• Can I install BIOS G500s G500s Touch?

  Can I install BIOS G500s G500s Touch? It will cause any problem? I want to update the BIOS, because right now, if I want to press F1 I have to press FN and F1 which sucks for games and normal usage. I noticed that G500s model received an update that allows users to make the F1 key, the key «Real F1» However, when I check the page G500s Touch, there is no update for her.

  I don't want to use this thing called "SharpKeys" to remap keys. I don't want any 3rd party program installed on my laptop just fix my keys F1 - F12, that is why, I want to know if it is safe to do so. Thank you.

  Hi Derek,.

  Welcome to the Community Forums of Lenovo!

  As there is no BIOS update available for computer laptop G500s touch, please install the update that is available for laptop G500s. If it is not compatible will display an error message during the BIOS update.

  Post back to us if the problem persists.

  Best regards

  Shiva Kumar

• Pavilion 11-n008tu: How can I enter Bios on Pavilion 11-n008tu?

  How can I enter Bios tried to type f9, f10, and esc on reboot, but always just goes to the login screen without visibly through the startup script. I want to start a cleaning hard drive so can send mobile recyclers

  Hello

  Shut down the laptop by holding down the key SHIFT left click Shutdown to temporarily prevent a hybrid boot.

  Now on TAP the ESC key as soon as you press the power button to see if it will launch the Start Menu.  If this is the case, select f10 to open the bios menu.

  Kind regards

  DP - K