15 Ubuntu won't start in VMware workstation 12 after a recent update of Ubuntu

Similar Questions

• ESX 3.5 if slow start on VMware Workstation 6.5?

  Someone has something to boot the ESX 3.5 faster VM on VMware Workstation 6.5 all parameters in VMX file?  It seems too slow when start with 2048 MB of RAM for each created virtual computer.  I took about 30 minutes is this normal?

  I also have one of this type of gear and it works very well and kicked around max 2-3 minutes.  You can check your settings and creation:

  1. create the new virtual machine with WS 6.5 mode and choose the option to create the virtual disk now so it can speed up your performance bit.

  2. remove the disk, sound, USB devices

  3. modify the "processor" just for VT VT/AMD Intel instead of two EPT and it give '2 vCPU' as well.

  4. close WS 6.5 and edit the .vmx file and place the monitor entry door back to "true", as shown above

  5. make sure that you have 'two vCPU' for both VMs.

  6 image .iso 3.5 mount ESX of ROM and make installation took about 5 minutes to fill very quickly if you gave him 2-4 GB of ram.

  7. If not work try combination of "MMU" for hardware/software see if it works except that it must work.  Just check VT as well enable on BIOS.

  Let us know what your results are like.

  If you found this information useful, please consider awarding points to 'Correct' or 'useful '. Thank you!!!

  Kind regards

  Stefan Nguyen

  VMware vExpert 2009

  iGeek Systems Inc.

  VMware, Citrix, Microsoft Consultant

• Lightroom cc 2015 does not start after the recent update on Mac Pro Yosemite

  After you download the last updated September 27, lightroom does not start on my mac.

  Used to work without problems so far.

  Tried to disconnect the last clouds and again without success.

  Thanks, that worked.

  Now, I have to do the update again hope that will work as well...

  Do you have any idea what caused the problem?

  Concerning

  Christian

  MIT thank wurde

  Hans Christian Behrendt

  2015-09-30 18:07 GMT + 02:00 rpandita [email protected]>:

  Lightroom cc 2015 does not start after that a recent update on Mac Pro Yosemite creates

  by rpandita https://forums.adobe.com/people/rpandita> in * Photoshop

  Lightroom *-see complete discussion

  https://forums.Adobe.com/message/8015642#8015642>

• Remote Desktop does not work after the recent update to VMWare Player, why?

  I have VMWare Player installed on a host with multiple virtual machines. I like to the DRC to the remote host and I've been in months, but in the recent update to VMWare Player, my connection to the DRC has dropped. Now when I try to the DRC to the host it hangs at "Estimate the quality connection" after I get my user name and password, but then it stops without errors or messages. I've updated the host and rebooted several times, I also tried to DRC from a computer on the same local network as the host with no result. I have a friends in exactly the same problem, connection dropped in the middle of the update and no resolution yet. Help?

  I uninstalled VMWare Player and did a clean install (rather than updating an earlier version) and the problem is solved!

• Tecra A4 won't start no-switches power off after 3 seconds

  Hey all,.

  I really hope you can help me on this. I recently bought a step expensive laptop Toshiba Tecra A4 to Ebay. He said there is a disk failure hard only... it's not.

  When I try to turn on the laptop, the lights come on and the DVD player starts to turn... everything is normal. But then after about 3 seconds it stops before that it can reach the bootscreen - as I would remove the power cable.
  The very strange thing is that sometimes we'll tell every 1 15 try the laptop starts as it should be and start my Linux live CD. Then I can work for hours, and bad don't get passes nothing... until I want to turn it back on. Then the game starts from the beginning.

  I tried already to:

  -Remove the hard drive from default
  -remove the power cable
  -only remove the battery
  -replace the RAM or be one of the two
  -to remove the two RAM
  -remove the power cable and the battery during the night to reset the CMOS

  ... nothing has changed.

  I would be very happy if someone could help me. So far, I have found that the writings of forum without response to this problem in the WWW - if at least I'm not the only crazy :-)

  Thank you very much

  Hans

  > When I try to turn on the laptop, the lights come on and the DVD player starts to turn all normal. But then after about 3 seconds it stops before the splash screen, it can reach

  My friend had the similar problem, but a replacement RAM helped.
  In your case, it might be everything. (motherboard, etc.)

  The BIOS can be updated from windows OS since only based victory of BIOS is available for download The ASP (partner) would update the BIOS but to be honest, I doubt it s a BIOS related issue to me it sounds like a hardware problem

• Lightroom 6.6.1. won't start not on a Mac after upgrading OS to El Capitan

  I use Lightroom since version 3 and never had a problem like this. I've updated my iMac with OS X El Capitan three days ago. After the upgrade I wanted to use Lightroom 6.6.1 but it does not start. It seems that it will start but suddenly it closes without any messages. The next time I try to start Lightroom again it closes immediately, I don't even see the first screen displayed every time that we start a program of Adobe.

  Post edited by: João Alves

  Finally, I could start Lightroom 6.6.1. The problem was with my synched on Google Drive folder structure. I decided to sync less files instead of all records and apparently it was missing some important files to LR 6.6.1 work.

• Premiere Pro 2015 won't open after the recent update

  I tried to reinstall the application, then by restarting my computer.  No luck.  I get the error message "the application could not start correctly (0xc0000142). Click OK to close the application. "when I opened the program from the windows start bar.  When I try to launch the app for the creative cloud app (3.41.181), that nothing is happening.

  I'm on a desktop Windows OS 64-bit 10

  8 GB ram

  Graphics card ATI Radeon HD 5850 with lastest drivers (15.11.1) AMD

  AMD Phenom II x 4 955 Processor 3.20 GHz

  First Pro worked great yesterday, even though I was no longer able to select option GPU acceleration when I started a new project.

  Other applications like Lightroom Adobe and audition open very well.

  What should be my next course of action?

  Hi Travis has,

  AMD Phenom II x 4 955 Processor 3.20 GHz

  What should be my next course of action?

  Update first Pro CC 2015 (9.2).

  Thank you

  Kevin

• Firefox don't appear or start on my XP PC after an automatic update (12/02/2014?); IE appears but freezes. Always have access to the e-mail. Advice to restore Firefox?

  The morning after the automatic update, my XP PC monitor had a black solid (or was it blue?) screen with only the arrow cursor visible. Move the mouse did nothing except move the arrow cursor. I rebooted and fortunately the Windows logo appears, and I was able to access all the programs I normally use except Firefox. When I click on the Firefox icon in the XP boot screen, the arrow cursor turns into the hourglass. The hourglass stay right there. Firefox can run in an alternate universe, because when I ran CCleaner, I received a message saying that Firefox took a long time to close, and I want to force it to close.

  I'm still able to send and receive emails, which indicates the Internet access. However, with no visible browser, I don't know how to connect to my XP PC Web sites. How can given these limitations, I go about restoring Firefox on my XP PC?

  Thank you.

  You are welcome

• I can view is no longer my company Email army, after some recent updates. I use Ubuntu 12.10, with firefox 25.0 (?) any ideas? My email is [removed]

  I used to be able to access my mail with my CAC card. Recently, I lost this ability. Are there known issues regarding the present with your recent updates? Button that would reset may not be the solution? I have not tried because I don't know what I lose if I clicked it.

  Do you always DoD certificates and the installed card reader security device?

  • http://www.forge.mil/resources-Firefox.html

  What happens if you try to access this site?

  Are there errors showing SSL?

• Workstation 8 vmware-workstation-server works not not on Ubuntu 11.10

  Hi people:

  Just, I have upgraded my Ubuntu 10.10 to 11.10 and replaced VMWare Server 2.0 with Workstation 8.02.  It seems that the vmware-workstation-server service is not running.  I'm unable to connect from a web page and the application vmware itself is not able to connect.  When I try to activate the dialog application vmware service I get the following messages in the terminal window where I ran vmware:

  update root@naplesubuntu:~#-rc.d: WARNING: /etc/init.d/vmware-workstation-server LSB missing information
  update - see rc.d: < http://wiki.debian.org/LSBInitScripts >
  Adding system for etc/init.d/vmware-workstation-server start...
  /etc/rc0.d/K01vmware-workstation-server->... /init.d/VMware-Workstation-Server
  /etc/RC6.d/K01vmware-workstation-server->... /init.d/VMware-Workstation-Server
  /etc/RC2.d/S03vmware-workstation-server->... /init.d/VMware-Workstation-Server
  /etc/rc3.d/S03vmware-workstation-server->... /init.d/VMware-Workstation-Server
  /etc/RC4.d/S03vmware-workstation-server->... /init.d/VMware-Workstation-Server
  From Workstation Server: fact

  If I disable the vmware application service, I get the following in the terminal window:

  root@naplesubuntu:~# remove any links of the system for etc/init.d/vmware-workstation-server...
  /etc/rc0.d/K01vmware-workstation-server
  /etc/RC2.d/S03vmware-workstation-server
  /etc/rc3.d/S03vmware-workstation-server
  /etc/RC4.d/S03vmware-workstation-server
  /etc/RC6.d/K01vmware-workstation-server
  Stop server workstation: fact

  If I believe that the service is running, but not doing anything, even though I do not see a specific process for this and there seems to be a vmware-workstation-server executable in/usr/bin.

  Not very well where to go from here.   I tried to uninstall and reinstall the workstation and even using a different port number for the Desktop server, but without any result.

  Suggestions welcome.

  Are you running other services on port 443 on this host?

• The VMware Workstation Server service stopped with service specific error %-1.

  Hi, when I try to enable sharing in Workstation 8 GTR | Change | Preferences | Sharing virtual machines, I get an error Impossible to configure the workstation server. Check the event log, I found they were trying to start the VMware Workstation Server service that does not start (even when you try to start it manually) and the following error is recorded "the VMware Workstation Server service stopped with service specific error %-1." by the Service Control Manager. I found no additional cases related.

  Running on Windows 7 SP1 x 64. The port is set to 7443.

  I also tried to find a newspaper there instead of vmware, but neither found anything related; However I could have missed something.

  Thanks for all the ideas, what could be wrong and how to fix it.

  Hello

  I have Workstation 8.0.1 installed on two laptop computers each running Windows 7 SP1 x 64... the shared component of the virtual machine runs on one but not the other. On the machine that I have problems with I uninstalled Workstation and reinstalled - without success. What I ended up doing to replace the datastores.xml file in the Directory go (C:\Documents and Settings\All Users\Application Data\VMware\hostd) on the laptop with the problem with the file datastores.xml of the laptop that works - success! I knew that there was a problem with the file because I've been poking around and noticed that the datastores.xml file is not open for editing - it was corrupted.

  I have attached the file to this message.

  Change of the section at the location that you store your shared VM (be sure to not use a UNC, which breaks the service as well!).

  I hope this helps.

  Steve

• Pictures on a new iMac won't start - he's trying to fix the photo library after the migration of my old iMac.  The two are running El Capitan

  Photos on my new iMac won't start - get an error message after trying to fix the photo library.  I just migrated all of my old iMac a new aid of Time machine backup.  Both are running OS 10.11 (El Capitan).

  Get an error message after trying to fix the photo library.

  What does this error message say?  Photos crash or exit gracefully?

  Where your iPhoto library that Library stored? In your pictures folder, or on an external drive?

  Try to copy the library of Photos directly without Time Machine. Connect the two Macs using your network and copy the old Mac to the new library, well as signed in on your new Mac.

  Then try to open this copy in Photos.

• My computer just won't start in safe mode...

  My computer just won't start in SafeMode... after the signs up to 'safe mode' and pushing enter... it stops (no signal) and normally restarts itself! I need to get rid of malware and infections in the start up... hmmmmm

  First, run a full scan with:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  If nothing detects remove, also try run system restore and your system at a time before the problem happens.

• installation of vmware workstation 6.5 on windows 10 error

  After you install vmware workstation 6.5 on windows 10 it gets error and restart. Is vmware workstation 6.5 support windows 10? FAILED TO INSTALL. vmware workstation 6.5 on windows 8, 8.1 and 10 support. ALL SUPPORT. I still don't understand...

  VMware Workstation 6.x do not support Windows 10 and will never support Windows 10.

  VMware Workstation 6.x reached "end of support" four years, October 1, 2011: Matrix.pdf product lifecycle

  We produce updates for release until its date of "end of support".  A product may not work properly with host OSes, processors or comments OSes that are not compatible with the product, especially the things that have been published after the date of "end of support".  We put a huge amount of effort to ensure that new hardware and operating systems works with each new major release of VMware Workstation, but we cannot go back and update any previous version of product to add support for all hardware and operating systems more recent.  If we tried to do this, VMware Workstation cost much more that it is today, simply because of the amount of work required to maintain!

  You need to upgrade your installation of VMware Workstation to something more recent, or downgrade your host operating system to a version compatible with VMware Workstation 6.5.

  I hope this helps!

  --

  Darius

• Hi, I have 0xc0000142 error when I start the first pro after the last update, before that I had no problem playing first pro...!

  Hi, I have 0xc0000142 error when I start the first pro after the last update, before that I had no problem playing first pro...!

  Hello Gene,

  You may need to check this: Re: Premiere Pro 2015 won't open after the recent update

  Kind regards

  Navdeep Pandey