ESX 3.5 if slow start on VMware Workstation 6.5?

Similar Questions

• ESX 3.5 really slow start in VMware Server

  Hello

  I managed to install ESX 3.5 Server 2 on a dell sc440. The physical server has 4 gigabytes of ram and is running xp pro as host. I attributed the ESX 3.5 VM 1.5 GB of ram because I would create 2 ESX VM's for testing. However when you turn on the computer, virtual, they take forever to a boot ESX is currently 30 minutes in a boot and just happen to the filesystem root tank.

  I have virtualization enabled in the BIOS of the physical server, but everyone would be able to give me guidance on the acceleration of time to start the virtual machine. It doesn't seem to be due to the amount of ram that I assigned the virtual machine because it has not used any amount over 600megs so far in the boot process. Ah the sc440 also has a Xeon dual-core in it.

  Thanks in advance.

  Very well.  Watch more closely the code reveals that on some hardware, a type of 64-bit operating system asked is not enough to force the use of hardware virtualization for guests who never in long mode.

  Please, add the following option to your virtual machine configuration file:

  monitor.virtual_exec = "hardware"
  

  That should do the trick.

• 15 Ubuntu won't start in VMware workstation 12 after a recent update of Ubuntu

  I'm quite new to the environment virtual system and linux. Someone could me help on my question below?

  I have a virtual system installed using VMware workstation 12. It works fine, until the upgrade of Ubuntu this morning.

  I have no idea what the update installed.

  After the required reboot, Windows VMware has always stop a black page.

  Before everything, there were some posts that I think they should be useful to target the issue here.

  

  He said:

  SMbus host controller not activated!

  No valid rapl area found within the package 0

  Thank you very much for your help!

  -Ninggang

  I found a solution!

  There is problem of ubuntu, new kernel is bad and it's a bug.

  To start again just hold SHIFT while your machine virtual machine to the menu shows ubuntu boot.

  Select Advanced, then choose more old kernel version and that's all.

  After you restart your virtual machine it always start on black screen, you need to delete newes kernel version linux-headers - 4.2.0 - 30 to begin on the old version and problem SOLVED!

  remove the kernel:

  sudo apt-get remove linux-image-4.2.0-30-generic
sudo update-grub2

  reboot.

• The VMware Workstation Server service stopped with service specific error %-1.

  Hi, when I try to enable sharing in Workstation 8 GTR | Change | Preferences | Sharing virtual machines, I get an error Impossible to configure the workstation server. Check the event log, I found they were trying to start the VMware Workstation Server service that does not start (even when you try to start it manually) and the following error is recorded "the VMware Workstation Server service stopped with service specific error %-1." by the Service Control Manager. I found no additional cases related.

  Running on Windows 7 SP1 x 64. The port is set to 7443.

  I also tried to find a newspaper there instead of vmware, but neither found anything related; However I could have missed something.

  Thanks for all the ideas, what could be wrong and how to fix it.

  Hello

  I have Workstation 8.0.1 installed on two laptop computers each running Windows 7 SP1 x 64... the shared component of the virtual machine runs on one but not the other. On the machine that I have problems with I uninstalled Workstation and reinstalled - without success. What I ended up doing to replace the datastores.xml file in the Directory go (C:\Documents and Settings\All Users\Application Data\VMware\hostd) on the laptop with the problem with the file datastores.xml of the laptop that works - success! I knew that there was a problem with the file because I've been poking around and noticed that the datastores.xml file is not open for editing - it was corrupted.

  I have attached the file to this message.

  Change of the section at the location that you store your shared VM (be sure to not use a UNC, which breaks the service as well!).

  I hope this helps.

  Steve

• Mac OSX Lion in ESX 5.1 does not start

  Hello

  I have a virtual machine to work in "VMWare Workstation 8.x" with Mac OSX Lion (I corrected my computer to do).

  I converted this virtual machine with VMWare Converter Standalone 5.1.x in vSphere ESX 5.1 and, after the successful conversion, I properly configure the type of operating system like Mac OS Lion.

  In ESX, the virtual machine starts, but stuck with the Apple logo and the spinning wheel of progress. So my questions are:

  • Do you have advice on how to fix this?
  • How to enter in "verbose" mode in vSphere? I tried to delay the start and be ready to press the two 'CTRL + v' or 'WIN + v' or 'ALT + v', but nothing has worked.

  Thank you!

  Eddie C.

  The problem here is that you violate Apple's EULA, no one here will be able to help since it is breaking this rules of communities.

  To virtualize OS x, you must run on Apple hardware.

• Ubuntu 11.04 very slow after upgrade to VMWare Workstation 8.0

  Hello

  After the update to VMWare Workstation 8.0 my Ubuntu 11.04 comments system (which worked very well with Workstation 7) behaves very slow sometimes.

  Slowly I want to say first that it is very laggy when I scroll conent inside windows, and also when I move windows.

  And with sometimes I want to say that this is not always the case. Sometimes, everything works fine for 1 or 2 hours and she begins and, sometimes, that's the problem immediately after starting Ubuntu.

  The problem occurs when restart Ubuntu does not help. But what is stopping Ubuntu and also restart VMWare Workstation on the host (in my case Windows 7) completely. When I do this and I'm lucky everything seems normal again for a while (1 or 2 hours). After that starts all over again.

  VMWare Tools is installed and the comments system has more then enough resources. I also improved the virtuale image to the latest version so that the new features in Workstation 8.0 are available.

  I first thought that maybe it's a RAM problem but the system begins to lag when there is still 1 GB + RAM available and 0.0% swap used.

  Any ideas what I could do? This is quite annoying...

  You can see the same bug that is described in this thread: http://communities.vmware.com/message/1840185#1840185

• My VMware workstation is very slow!

  I use a software called SAP ECC 6.0 through the VMware Workstation and software is installed in my computer, but the performance is very ugly. Even the mouse arrow moves slowly in the virtual machine window. My laptop is good, I have a processor intel 2.53 hz, 4 GB of RAM, HD (7200 RPM).

  Anyone know how I can speed this softaware?

  My OS is windows 7 (64), and I'm running windows server 2003 in the virtual machine.

  Thank you

  OK, after reviewing your vmware.log file...

  -Your host has a dual-core processor, so you don't need to configure a single host with more than 1 vCPU.  Please reconfigure your comments for 1 vCPU.

  -You said that your host has 4 GB of RAM installed, but you have allocated 3.5 GB of RAM at your prompt, that leaves only 500 MB of RAM to your host run.  Suggest to lower the amount of memory live allocated to your guest.  Start with 1 GB and move up from there.

  -I see some indications of slow storage host.  What type of storage is your guest stored on?  (External USB?  Network drive?  Others?)

  -I see you are using Workstation 6.5.1.  6.5.3 workstation is now available and is free to download for you.  I don't think that 6.5.3 has specific fixes for your problem, but something to think about.

  -If not already done, please configure CD-ROM of your invited to start "disconnected."

  Give the above a try and tell us if it helps.

• iMac slow start was fast

  My iMac, with 1 disk of merger to, was very quick to open the OS since multinational April 2015, then suddenly became very very slow to open recently.  For example the Apple logo appears in a few seconds and the load in a few seconds more.  Now the Apple logo minutes to load.

  Latest version of the OS is 10.10.5.  It's 3.1 GHz Intel Core I7 processor.  The memory is 16 GB 1600 MHz DDR3.

  No idea why the slow start happening?  Any suggestion would be appreciated.

  Thanks for posting a report http://etrecheck.com/ EtreCheck

• updated to 16 MB on 2011 iMac 27.5 inch quad core will cause a slow start to the top?

  Have 27.5 inch iMac OSX 10.11.3 computer. The memory of 4 MB.  Recently updated to 16 MB.  Now have the very slow start up.  15 minutes.

  Should take 15 minutes to initialize 16 MB on a quad core computer?

  ewcbhc wrote:

  Have 27.5 inch iMac OSX 10.11.3 computer. The memory of 4 MB.  Recently updated to 16 MB.  Now have the very slow start up.  15 minutes.

  Should take 15 minutes to initialize 16 MB on a quad core computer?

  If you put expensive RAM and/or incorrect RAM then Yes. iMacs are very sensitive to the RAM and you must use quality RAM, more experienced on these forums users use OWC (www.macsales.com) or critical (direct purchase). RAM should also be installed in pairs. If you purchased anything else, then after a report of EtreCheck of your system and we can look for obvious problems.

• Satellite X 200 - 25i - slow start on

  Hello

  This cute portable X 200 - 25i and everything you've just bought a few weeks ago works great. But I just realised, it this slow start. It will take about 3 minutes to load all the software, and I did install something special... everything is factory shipped Vista, antivirus software for my mouse logitech...

  I also replaced a disk, what WD 320, and the first with the OS is the original...

  Any help? Any ideas?

  Thank you all very much...

  Hello

  My notebook booted up like a turtle. Do you know why?
  Because many applications have been installed in the autostart folder or in the registry, run entry and this affected the start-up procedure.
  I had Norton Antivirus installed and loaded always at the beginning.

  I read that this software needs of too many resources and slows down the performance of the laptops.
  I removed and instead of Norton, I use another program called Antivir antivirus.
  It s freeware and my notebooks starts much faster than with preinstalled Symantec Norton Antivirus.

  I recommend also using a small tool called CCleaner.
  It repairs the registry of the operating system and remove all garbage and junk of the system.
  It s really nice

  See you soon

• Slow start for Satellite Pro P300 P

  My P300 has a slow start and takes forever to exceed the windows page. Any help on this?

  Hello

  My laptop starts slowly because I had too many processes running in the context of the BONE.
  I disabled it in msconfig.
  I think you should try this too.

  In addition, you must update or remove tool TEMPRO.

  Check it!

• Satellite Pro - Slow start up and sound is messed up

  I had my * Toshiba Satellite Pro * with * Windows XP * for a good few years now. She has always worked like a gem and only gave me no problems until a few weeks ago.

  A few weeks ago I was downloading a program and with it the virus 'Antivir Solutions' very undesirable and unliked. I've done everything I can to get rid of this disaster (with the help of the support forums) and I think that I managed to get rid of it, but since my computer has not been the same.

  I had trouble downloading a PDF document, a few days ago and it froze so I tried to restart that caused the computer to have a hissing fit, remove my user account which meant I had to configure everything again from scratch. And, now, the computer takes a good 45 minutes from the moment you press the button "ON" when it is ready to start working. Not to mention, it takes a good 10 minutes every time you click on an icon for the program to start actually...

  I tried to defrag the system and you have tried to uninstall unused programs to speed up the computer, but it did not work.
  I also ran several anti-virus (e.g. Norton, AVG, Microsoft Security Essentials) to make sure that I don't have wicked not spoil me, but they come clean.

  May I also add the sound is messed up also. If I use the built-in speakers or external speakers, the sound is disjoint and broken. Like any video I have play.

  I don't know what to do.
  I can't really afford a new computer, but I need my computer to be reliable. I use my computer for 12 of the 24 hours a day...
  * What can I do? *

  Hi nicoletrist,

  I put t know what laptop you have exactly, but I think that the slow start Windows is caused due to viruses you have or had.
  A few years ago I also had a virus and it was causing a very slow start to the top, he did take up to 10 minutes until Windows has been loaded and the only solution to get rid of this used Toshiba recovery disc.

  I would like to recommend you. Use the Toshiba Recovery disk to restore to factory settings and save your data, because everything on the HARD drive will be erased.
  I'm sure after using the laptop recovery disk will work like a charm again! :)

• Close slowly in the night and slow start morning

  I'm having this problem and does not know what it is. Slow closed at night and slow start in the morning and using the capture software and screen illustrated space left. I don't see how to repair disk permissions if it is my problem can anyone help me I appreciate it.

  Thanks to you all.

  Please post a report of EtreCheckof your system. We then look for obvious problems. Please click on the link, download the application and run the report. Once you have the report, please copy and paste into your response to this post.

  If you would like more information on what is EtreCheck, just click on the link and you will find a description of the application.

• Slow start on Vista Home Premium - Satellite U400-15B

  Hello

  I just bought Satellite U400-15B and am finding it takes very long to start Vista, I went into msconfig and disabled the things I don't use and stuff that I think is not necessary, but it is still having to wait ages before that I can use the laptop. I have enough RAM and processor speed, so I don't think that the specifications of the laptop are a problem

  Is there something that can be done on this slow start, any help would be appreciated.

  Thank you

  Hello

  I think slow start or laptop slow operations depend on good configuration of the OS. I played with this last month and I am now convinced that Vista starts and runs on my laptop.
  I wrote about this in another thread and if you have time look under http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=134947

  Please let me know what you think of this.

• Firefox has slow start up & I have the latest version. IE, Chrome, AOL will begin immediately. Firefox takes up to 10 minutes.

  Firefox has slow start up & I have the latest version. IE, Chrome, AOL will begin immediately. Firefox takes up to 10 minutes.

  This has happened

  Each time Firefox opened

  == update to 3.6

  You may need to use questions Troubleshoot Firefox in Safe Mode (click on "Safe Mode" and reading) to locate the problem. Firefox Safe mode is a diagnostic mode that disables Extensions and some other features of Firefox. If you are using a theme, place you in the DEFAULT theme: Tools > Modules > Themes before start Safe Mode. When you enter Safe Mode, do not check all the items in the window, just click "continue mode without failure." A test to see if the problem you are experiencing is fixed.

  See:
  Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
  Solve problems with plugins like Flash or Java to solve the common problems of Firefox
  Troubleshoot and diagnose problems in Firefox

  If the problem does not occur in mode without failure, then disable all your Extensions and Plug-ins, and then try to find out who is causing by allowing both the problem reappears. You MUST close and restart Firefox after EACH change via file > restart Firefox (on Mac: Firefox > Quit). You can use 'Disable all add-ons' on the start safe mode window.