1801 - Microcode Patch error after upgrading D310v EVO 1.7 GHz Celeron processor Celeron 2.8 GHz

Similar Questions

• 1801 - Microcode Patch error

  I've updated my Pentium 4 processor, 1500 MHz for Pentium 4, 2400 MHz.  Now, I get the following error on POST.

  1801: Microcode Patch error.  Missing or invalid processor Microcode patch.  Please contact Compaq Computer Corporation for a new ROM BIOS to support the new stepping.

  How to solve this?  I don't find any update of the Compaq BIOS at this address:

  http://h10025.www1.HP.com/ewfrf/wc/softwareList?OS=228&LC=en&DLC=en&cc=us&lang=en&product=405364

  You can try this update if you have not already... otherwise I think you're the GROUND.
  
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=37580&LC=en&DLC=en&cc=us&product=92873&OS=228&lang=en

• Change processor, 1801 - Microcode Patch error.

  Hello world

  I changed the processor on my HP SFF 4000 (decommissioning the core 2 duo E7500 to a core 2 duo E6300, I need the E7500 in another computer) and I get this nasty 1801 - Microcode Patch error.

  I can't get into the bios, or do anything.

  I can press F1 to jump, then computers goes to windows but switches off the power in an emergency a minute later.

  I guess I can have Flash my bios, but if someone can lead me to detailed instructions and a download link to a bios that supports the E6300 for my SFF 4000, I would be really grateful!

  Thanks in advance!

  Hello:

  You will live by pressing F1 to continue or install a supported processor.

  There are no updates BIOS or firmware updates that will add support for the E6300 processor in your PC.

  Here is the list of processors supported, that you can choose.

  HP Compaq 4000 Pro Series

  Standard features and configurable components (availability may vary depending on country)

  Intel Celeron processors

  Intel Celeron E3300 processor

  2.50 GHz, 1 MB, 800 MHz FSB L2 cache

  Processor Intel Celeron E3500

  2.70 GHz, 1 MB, 800 MHz FSB L2 cache

  Intel Pentium processors:

  Processor Intel Pentium E5700

  3.0 GHz, cache L2 2 MB, 800 MHz FSB

  Processor Intel Pentium E5800

  3.20 GHz, cache L2 2 MB, 800 MHz FSB

  Intel Pentium E6700 processor

  3.20 GHz, cache L2 2 MB, FSB 1066 MHz

  Processor Intel Pentium E6800

  3.33 GHz, cache L2 2 MB, FSB 1066 MHz

  Intel Core 2 Duo processors

  Intel Core 2 Duo E7500 processor

  2.93 GHz, cache 3 MB L2, FSB to 1066 MHz

  Intel Core 2 Duo E7600 processor

  3.06 GHz, cache 3 MB L2, FSB to 1066 MHz

  Intel Core 2 Duo E8400 processor

  3.0 GHz, cache 6 MB L2, 1333 MHz FSB

  Intel Core 2 Duo E8500 processor

  3.16 GHz, cache 6 MB L2, 1333 MHz FSB

  Intel Core 2 Duo E8600 processor

  3.33 GHz, cache 6 MB L2, 1333 MHz FSB

  Intel Core 2 Quad Processors

  Intel Core 2 Quad Q8400 processor

  2.66 GHz, 1333 MHz FSB, 4 MB L2 cache

  Intel Core 2 Quad Processors

  Processor Intel Core 2 Quad Q8400s

  2.66 GHz, 4 MB L2 cache, 1333 MHz FSB, 95W TDP

  I saw the BIOS release notes, and only also supports processor Q8400s.  No other processor support has been added.

  Paul

• COMPAQ EVO D500: 1801 MICROCODE PATCH ERROR

  When the PC boots it brings error 1801 could you help me slve this. or can I install a new OS

  Hello:

  This error means that you have installed a processor not supported.

  You must install a supported processor.  See page 4 of the list of caught processors supported.

  http://www.NTS.nl/site/HTML/modules/PDF/PC/Evo_D500_Series_PIV.PDF

• HP Compaq dc7700p: how to fix '1801 Microcode Update error' HP Compaq dc7700p Convertible Minitowers

  Hello

  I read and read this post for a few times and I'm not sure it will work on my PC so I have to ask, how to solve '1801 Microcode Update error' in HP Compaq dc7700p Convertible Minitowers I upgraded it with E7200 instead of the original E6300

  Here is the product number: p/n RN120ET #UUZ

  I am in a position to start and start windows, I don't know is that it works normally or not, I'm just bored with the startup message:

  Please HELP and thank you in advance!

  Hello:

  You must upgrade the BIOS to version to get rid of the error of microcode, and processor at half the speed of the FSB only works because the update of the BIOS was not written for the E7xxx processors work correctly.

  You will need to run this software whenever you enter windows and change the multiplier up.

  Or you can run this batch file listed on the bottom of Web page so that it runs automatically.

  http://CrystalMark.info/software/CrystalCPUID/index-e.html

  If I were you, I just install an E6700 Conroe and have an update without problem.

  You will need to use the BACK base flash because I don't think that there is an update of the BIOS written for W7.

• "Insufficient for an image" error after upgrade to 10.1.4 or 9.5.2

  Greetings,

  We continue to receive the following error message: "Insufficient for an image" error after upgrade to 10.1.4 or 9.5.2 and we want a quickfix (as it appears in: fter-updating-to-10-1-4-or-9-5-2/ https://blogs.adobe.com/dmcmahon/2012/08/21/acrobat-insufficient-data-for-an-image-error-a). Our company uses scanning software, and we must be able to immediately view the PDF files, retirement is not an option that we would need to do it on all computers. It is urgent for us to have this fixed number, a quickfix (as shown previously) would be ideal, because we cannot wait for the next update to Acrobat. This question as been around for several weeks now.

  Thank you very much for your time and help.

  Acrobat engineering wishes to inform users facing this problem that the latest version of the player (available for download on http://get.adobe.com/reader) XI solves this problem. Users are advised to download the latest version as soon as possible to avoid encountering this error in the future. As mentioned, the team is working hard to solve the problem in earlier versions (10.x and 9.x) as well and plans to deliver a solution by Q1 2013. For more details, you can check out the blog here

• Error after upgrade to iOS 9, code of return and Xcode 7: 65

  Hello

  I could deploy applications on iPhone before updating to 7 Xcode and iOS9 (automatically).

  I use Jdeveloper 12.1.3.

  Now, I get the error:

  [19: 02:19] run command line: xcodebuild-window Oracle_ADFmc_Container_Template archive archivePath - /Users/user/jdeveloper/mywork/ProductList/deploy/iOS2iTunes2iPhone/Destination_Root/ProductList.xcarchive - sdk iphoneos IPHONEOS_DEPLOYMENT_TARGET = 7.0 TARGETED_DEVICE_FAMILY = 1 ADD_SETTINGS_BUNDLE = No. PRODUCT_NAME = ProductList CODE_SIGN_IDENTITY = iPhone Developer: name V (12345XYZ)

  [19: 02:41] orders for next generation failed:

  [19: 02:41] command-line execution failed (return code: 65)

  [19: 02:41] undeployment.

  [19: 02:41] - incomplete deployment.

  [19: 02:41] could not build the iOS application pack.

  [19: 02:41] deployment failed due to one or more errors returned by 'xcodebuild.  What follows is a summary of the returned error:

  Command-line execution failed (return code: 65)

  Orders for next generation failed:

  Ld /Users/user/Library/Developer/Xcode/DerivedData/Oracle_ADFmc_Container_Template-gwxjznarmoyczadsnbxmvfmebqni/ArchiveIntermediates/Oracle_ADFmc_Container_Template/IntermediateBuildFilesPath/Oracle_ADFmc_Container_Template.build/Release-iphoneos/Oracle_ADFmc_Container_Template.build/Objects-normal/armv7/ProductList normal armv7

  (1 failure)

  And in fact the ProductList file is missing in this way!

  What could be the reason?

  Someone at - it experience with deploying applications after upgrading to Xcode 7?

  Thanks for your help!

  Klemens

  Hello.

  XCode 7 don't is not supported with MAF for now. Our goal is to support in our next major release.

  Just rename your current installation of XCode to something else (XCode 7 would be nice), then download and install XCode Developer Center 6 Apple. You MAF should run without any problem on iOS 9 anyway.

  Best regards

  Frédéric Desbiens

  Senior Product Manager

  Mobility and Cloud oracle

  Twitter: @BlueberryCoder

  blog: http://blogs.oracle.com/blueberry

• small business of HP dc 7700: 1801 bios error after upgrading processor

  I upgraded the processor of pentium dual core E5200 @ 2500 Hz. After all biosupdates, I still get the error from the bios 1801 on the revision of the processor. The processor is now set to 2500 Hz, before the updates, it was 1800 Hz as the old processor was. But I can't get the error removed. Suggestions?

  added: the system is slow now.

  Hello:

  I could run the last update of firmware and see if that fixes the problem.

  Microcode update is a complicated business, but I simplified it for you...

  Tools you will need... usb flash drive of at least 1 MB in size.

  I have attached all the files you need below.  You will need to unzip them into their records.

  1. make the bootable flash drive.  Insert the flash drive into your PC and run sp27608.

  2 once the tool formats the flash drive and make it bootable, copy the contents of the folder BACK to the flash drive system.  All the contents of the file, not the file.

  3 copy the contents of the file in the folder BACK flash in the usb flash drive.  Once again, just the contents of the file, not the file.

  4 restart the computer, press the F9 key and select the USB in the list of bootable devices.

  5. the PC should boot from the USB and will take you to a command prompt.

  6. at the command prompt, type Flashbin.exe and press the Enter key.

  7 follow the instructions on the screen to update the firmware.

• VmWare ESXi 5 error after upgrade :( [Host RAM 32 GB limit!]

  Hello! After that I've updated my lab system, I got the error message "the system memory is dissatisfied with the 32 GB memory maximum limit. Course with 48 GB of memory"...

  When I searched I found out that there is a limit to the FREE VERSION ONLY for the memory of the host!

  How can I get the machine up and working again? I need my lab and run tomorrow for an upgrade I need to test. I can't run my machines now!

  Is it possible to downgrade the level of patch again? now running build 702118 after the update... I have to make my machines up and running tomorrow morning!

  Just remove some RAM modules that you end up with a maximum of 32 GB and your host will start again.

  You can perform a roll to your previos version by pressing SHIFT + R ESXi start start.

  Kind regards

  Mario

• How to solve '1801 Microcode Update error' in HP Compaq dc7800 Convertible Minitowers

  I have Intel Core 2 Duo 2.93 GHz. My operating system is Windows 7 Ultimate x 64.

  Hello:

  The E7500 processor is not supported in the dc7800, reason why you get the error of microcode.

  Here is the list of supported processors.

  Intel Core 2 Duo processors:

  Processor Intel Core 2 Duo E4500 (2.20 GHz, 2 MB L2 cache, 800 MHz FSB)

  Processor Intel Core 2 Duo E4600 (2.40 GHz, 2 MB L2 cache, 800 MHz FSB)

  Processor Intel Core 2 Duo E4700 (2.6 GHz, 2 MB L2 cache, 800 MHz FSB)

  Processor Intel Core 2 Duo E6550 (2.33 GHz, 4 MB L2 cache, 1333 MHz FSB)

  Processor Intel Core 2 Duo E6750 (2.66 GHz, 4 MB L2 cache, 1333 MHz FSB)

  Processor Intel Core 2 Duo E6850 (3.0 GHz, 4 MB L2 cache, 1333 MHz FSB)

  Processor Intel Core 2 Duo E7200 (2.53 GHz, 3 MB cache L2, FSB to 1066 MHz)

  Processor Intel Core 2 Duo E7300 (2.66 GHz, 1066 MHz FSB, L2 cache 3 MB)

  Processor Intel Core 2 Duo E8200 (2.66 GHz, 6 MB L2 cache, 1333 MHz FSB)

  Processor Intel Core 2 Duo E8300 (2.83 GHz, 6 MB L2 cache, 1333 MHz FSB)

  Processor Intel Core 2 Duo E8400 (3.00 GHz, 6 MB L2 cache, 1333 MHz FSB)

  Processor Intel Core 2 Duo E8500 (3.16 GHz, 6 MB L2 cache, 1333 MHz FSB)

  Inter Processor Core 2 Duo E8600 (3.33 GHz, 6 MB L2 Cache, bus front end to 1 333 MHz)

  As a long shot, you can try to install the latest firmware update. You must use a bootable USB key with back files in order to run the flashbin.exe command after copying the microcode update files in your USB drive bootable.

  I can't support dc7800 site. When you can, choose the 2010 v1.14 firmware update download

  If you are unfamiliar with how to make a bootable flash drive, this is a good 'how' of the article with the files you need.

  http://www.techpowerup.com/forums/showthread.php?t=47812

  Paul

• Firefox shortcut icon error after upgrading to 7.0

  I have upgrade my Firefox 7.0, but the shortcut icon is changed not like it used to be, but it resembled an icon of the installer. When I clicked it, it opens Firefox browser very well without any errors. Why is it happening and how to fix?

  Thanks a lot before.

  Try resetting the Windows icon cache.

  • Open the task (Ctrl + Shift + ESC) Manager
  • In the processes tab, right-click on the Explorer.exe process and select end process.
  • Open the file picker via ' file > new task (run) "and click on the Browse button.
  • Type or paste %USERPROFILE%\AppData\Local in the file name field (AppData is a hidden folder).
  • Select the file IconCache.db and use Delete on the shortcut menu to delete the file.
  • After that the IconCache.db has been deleted, start a new explorer.exe process through "file > new task" for the job and work the taskbar to return.
  • It is possible that the IconCache.db file is a hidden file, and in this case you must enable the display of hidden files. You can verify that you can see the file before doing above mentioned as follows.

  See http://kb.mozillazine.org/Show_hidden_files_and_folders

• Preferably system errors after upgrading to El Capitan

  After the upgrade to El Capitan, I can't connect to all the apps to icloud.  Had errors when you first install my computer after the upgrade to the new operating system, so I opted out of it then.  I went into System Preferences, and there is no freeze that system preferences.  This also happens when I click on 'Security and privacy' and 'Parental control' (these are the only elements when I tested all components).  I tried safe restart and that did not work.  I have also tried in a guest account and have no problem in the guest account.  This account is extremely slow and freezes more than the guest account.  This is the part that I'm stuck in (I tried to go through other threads, but have no luck with their recommendations).  Here is a copy of the console messages that I get when I click on the iCloude pane in system preferences:

  04/12/15 9:31:35.448 PM SpotlightNetHelper [703]: tcp_connection_destination_handle_tls_close_notify 20 decision of closure due to the TLS CLOSE_NOTIFY alert

  04/12/15 9:31:35.449 PM SpotlightNetHelper [703]: Error 20 32 tcp_connection_tls_session_error_callback __tcp_connection_tls_session_callback_write_block_invoke.434

  04/12/15 9:31:35.452 PM SpotlightNetHelper [703]: tcp_connection_destination_handle_tls_close_notify taken 26 closing due to the TLS CLOSE_NOTIFY alert

  04/12/15 9:31:35.452 PM SpotlightNetHelper [703]: 26 32 tcp_connection_tls_session_error_callback __tcp_connection_tls_session_callback_write_block_invoke.434 error

  04/12/15 com.apple.preferences.icloud.remoteservice [821 9:31:36.162 PM]: unable to connect (_signInButton) out of (iCloudPref) (NSButton): missing setter or instance variable

  04/12/15 com.apple.preferences.icloud.remoteservice [821 9:31:36.163 PM]: unable to connect (_signInSpinner) out of (iCloudPref) (NSProgressIndicator): missing setter or instance variable

  04/12/15 com.apple.preferences.icloud.remoteservice [821 9:31:36.163 PM]: couldn't connect action, class iCloudPref target does not respond to the - signinPressed:

  04/12/15 com.apple.preferences.icloud.remoteservice [821 9:31:36.193 PM]: additional logging, array returned in signedInAccounts is)

  )

  04/12/15 9:31:36.381 PM syncdefaultsd [252]: accountsd has been removed from the sync of apps.

  "04/12/15 9:31:36.393 PM accountsd [823]: * reason for termination due to an untrapped exception"NSInvalidArgumentException"app,: ' *-[__NSSetM addObject:]: object cannot be null"

  First throw call stack:

  (

  0 CoreFoundation 0x00000001081f9e32 __exceptionPreprocess + 178

  1 libobjc. A.dylib 0x0000000107ca2dd4 objc_exception_throw + 48

  2 CoreFoundation 0 x 0000000108134610-[__NSGlobalBlock hold] + 0

  3 AccountsDaemon 0x00000001071fbb4b-[ACDDatabaseInitializer _ensureAccountTypeWithIdentifier:supportsDataclasses:syncsDataclasses:] + 354

  4 AccountsDaemon 0x00000001072008db-[ACDDatabaseInitializer _addDocumentsAndVPNDataclass] + 394

  5 AccountsDaemon 0x00000001071f7a86 __46-[ACDDatabaseInitializer updateDefaultContent] _block_invoke + 2421

  6 CoreData 0x00000001073169e4 developerSubmittedBlockToNSManagedObjectContextPerform + 196

  7 libdispatch.dylib 0x00000001093e13c3 _dispatch_client_callout + 8

  8 libdispatch.dylib 0x00000001093e29aa _dispatch_barrier_sync_f_invoke + 74

  9 CoreData 0x00000001073168cc-[NSManagedObjectContext performBlockAndWait:] + 236

  10 AccountsDaemon 0x00000001071f70f4-[ACDDatabaseInitializer updateDefaultContent] + 132

  11 AccountsDaemon 0x000000010722a178-[ACDDatabase _setupManagedObjectContext] + 313

  12 AccountsDaemon 0x000000010722891f-[ACDDatabase initWithPath:] + 129

  13 AccountsDaemon 0 x 0000000107228884-[ACDDatabase initWithDefaultPath] + 64

  14 AccountsDaemon 0x00000001072251bf-[ACDClient initWithConnection:database:] + 183

  15 AccountsDaemon 0x0000000107222ea4-[ACDServer createClientForConnection:] + 69

  16 AccountsDaemon 0x00000001072218b7-[ACDServer listener: shouldAcceptNewConnection:] + 78

  17 service_connection_handler_make_connection Foundation 0x000000010773674e + 178

  18 libxpc.dylib 0x00000001097e7986 _xpc_connection_call_event_handler + 35

  19 libxpc.dylib 0x00000001097e6045 _xpc_connection_mach_event + 1756

  20 libdispatch.dylib 0x00000001093e954e _dispatch_client_callout4 + 9

  21 libdispatch.dylib 0x00000001093e99c0 _dispatch_mach_msg_invoke + 555

  22 libdispatch.dylib 0x00000001093e61b8 _dispatch_queue_drain + 1207

  23 libdispatch.dylib 0x00000001093e8317 _dispatch_mach_invoke + 735

  24 libdispatch.dylib 0x00000001093e61b8 _dispatch_queue_drain + 1207

  25 libdispatch.dylib 0x00000001093ec6bf _dispatch_queue_invoke + 549

  26 libdispatch.dylib 0x00000001093e4d0b _dispatch_root_queue_drain + 538

  27 0x00000001093e4ab8 _dispatch_worker_thread3 + 91 libdispatch.dylib

  28 libsystem_pthread.dylib 0x00000001097724f2 _pthread_wqthread + 1129

  29 libsystem_pthread.dylib 0 x 0000000109770375 start_wqthread + 13

  )

  04/12/15 com.apple.xpc.launchd [1 9:31:36.394 PM]: (com.apple.accountsd [823]) Service was released due to the signal: Abort trap: 6

  04/12/15 9:31:36.394 PM diagnosticd [134]: error assessment process info - pid: 823, puniqueid: 823

  04/12/15 com.apple.AddressBook.ContactsAccountsService [284 9:31:36.394 PM]: [accounts], we have failed to get an account for com.apple.account.CardDAV: Domain = com.apple.accounts error Code = 10002 "(null)".

  04/12/15 9:31:36.395 PM sharingd [645]: [AOSAccounts]: [__52-[ACAccountStore (iCloudAccount) icaAppleAccountType] _block_invoke]: accountTypeWithIdentifier returned the error: Domain = com.apple.accounts error Code = 10002 "(null)".

  04/12/15 9:31:36.396 PM sharingd [645]: [AOSAccounts]: [-[ACAccountStore (iCloudAccount) icaAppleAccounts]]: icaAppleAccountType returned no account type

  04/12/15 9:31:36.396 PM sharingd [645]: 21:31:36.395: no parameter of delegate account, account exists = NO

  04/12/15 com.apple.xpc.launchd [1 9:31:36.395 PM]: (com.apple.accountsd) Service worked only for 0 seconds. Push the respawn in 10 seconds.

  04/12/15 9:31:36.397 PM sharingd [645]: 21:31:36.396: Tethering: identifier needs fixing

  04/12/15 9:31:36.617 PM ReportCrash [774]: report of incidents recorded for accountsd [823] version 113 (113) to/Users/username/Library/Logs/DiagnosticReports/accountsd_2015-12-04-213136_comp utername.crash

  04/12/15 9:31:36.625 PM ReportCrash [774]: Remove excessive log: file:///Users/username/Library/Logs/DiagnosticReports/accountsd_2015-12-04-2128 12_Computername.crash

  04/12/15 9:31:36.626 PM ReportCrash [774]: impossible to write history of crash in file:///Users/username/Library/Application%20Support/CrashReporter/accountsd_E0 A 26, 892 - 0DE7 - 5E4C - A1FD - 846D9042A9FB.plist.

  04/12/15 com.apple.xpc.launchd [1 9:31:37.851 PM]: (net.openvpn.client [824]) Service came out with abnormal code: 1

  04/12/15 com.apple.xpc.launchd [1 9:31:37.851 PM]: (net.openvpn.client) Service worked only for 0 seconds. Push the respawn in 10 seconds.

  Please, back up all data before proceeding.

  Triple-click anywhere in the line below on this page to select this option:

  ~/Library/Accounts/Accounts3.sqlite

  Right-click or Ctrl-click on the highlighted line and select

  Services ▹ reveal in Finder (or just to reveal)

  of the contextual menu.*, a file must open with a selected item. Move selected item to the trash. Log off or restart the computer, and empty the trash.

  * If you do not see the item context menu copy the selected text in the Clipboard by pressing Control-C key combination. In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

• Windows Media Player C00D11BA error after upgrade (?) to Windows 8.1 8.0 on the urge

  I have one:

  HP ENVY 15 notebook PC, nuber of product: C8P47AV

  8.1 pro 64-bit of Windows

  Intel Core i7-4702MQ CPU @ 2.20 GHz

  NVIDIA GeForce GT 740M

  #1 AudioDevice: Intel(r) Audio display

  #2 AudioDevice: IDT High Definition Audio CODEC

  After I've upgraded to Windows 8.1 and was playback of an MP3 file, I got this Windows error mseesage, "Windows Media Player C00D11BA error" and no sound. Many required devices as their drivers updated and completed.

  Please advise,

  Mike

  Hi Mike,.

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63555.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  Once complete, download and reinstall the Chipset driver from the link below.

  Chipset Driver - Windows 8.1

  When you're done, shut down the laptop by holding down the SHIFT key when you click Shutdown to temporrily prevent a hybrid boot.

  Only start the laptop and let Windows load completely - it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - restart the computer and try to play the mp3 file.

  Kind regards

  DP - K

• HP 15 DO54 SQ, 3F0 ERROR AFTER UPGRADING BIOS

  
  

  Hello

  All the tests of hard drive was ok, PASS. Now how to fix error 3F0

  My old sytem was Windows 7 until I did the upgrade of bios, so after this error, I install Win 8, then I did upgrade the bios to version under Win 8 F18.

  I turn on my laptop and I went into the bios and I find support legacy startup option (on the version of the bios F08 this option does not exist), I enable legacy support and everything was ok, I reinstall Windows 7 on my laptop.

  Thank you

• C5550 error after upgrade to Windows 7

  I upgraded my computer to HP Pavilion Elite Windows VISTA Home Premium 64-bit for Windows 7 Home Premium 64 bit. I have a HP Photosmart C5550 printer is connected via USB.  All different printer dialog boxes print operated without problems in Windows VISTA.  The Windows 7 upgrade process without incident and I thought it was full until I tried to adjust the preferences of printer (HP Photosmart C5550) for a print request.  Basically, I like to print things with a low resolution only in black ink and for this I select the Preferences link in the print window.  I was able to select the link Preferences only once and adjusted the print settings according to what I wanted and printed the task successfully.  The next time I tried to print something, I wanted to change my preferences to something with color but encountered the following error:

  Window title: C:\Windows\splwow64.exe

  Address of the 0x5005f6a1 function caused a protection fault. (code 0xc0000005 exception)

  Some or all property pages cannot be displayed.

  Ok

  Select product OK then:

  Operation could not be performed.

  Ok

  At this point I want to emphasize that the print request will display when I select the button print.  I can not simply adjust preferences.  Further study produces the same error message in the HP Solution Center.

  I visited HP website to try to find a solution and:

  1. Uninstalled my printer
  2. Downloaded the last installation file "PS_AIO_04_C5500_NonNet_Full_Win_WW_130_140.exe".
  3. Installed the printer according to the instructions

  Subsequently, I was happy to see I could once more click the Preferences link in the print window, but was quickly disappointed when I received the same exact error messages when I tried to repeat a change in preferences for a second printing (and all) the print requests.

  Any help will be welcomed.

  Thank you.

  Hey TicoBird,

  I am familiar with the error code that you see, but there is a solution available for upgrades of USB. It looks like you don't have run the patch included in the solution, so perform an uninstall/patch/reinstall might fix the problem.

  Also make sure that you download the 64-bit drivers.

  If this solves your problem please let me know.