1813 and 1053 Printer Spooler error... I can't print

Help me!

I bought a new dell inspiron 1545 in December and a new printer Dellp713w after Christmas.

I was able to print until this week (April 1) and now I get the 1813 and 1053 error when I go to start my spooler.
That's happened?

I ran the scan from cmd promt and it occurred to me that I corrupted files that it could not fix.

I did a restore of the system to a return date and that no longer works.

I am able to use my printer again?

starynights,

Error 1053, I found THIS .

Even though Dell has Windows 7 drivers, most of the time, the drivers are Vista and in some cases XP drivers. I try to unplug the printer, then uninstall the printer.

Restart your computer. Make sure that the printer is deleted. Driver Manual printer removal

Go to the Dell website and download the drivers. Try installing the driver in compatibility mode. I would try mode compatibility Vista first, and if that does not work, uninstall of the printer and restart and try in Xp compatibility mode. Can be found at the linlks for drivers and how to install the printer in compatibility mode...

P713w Wireless all-in-One Printer owners thread

Be sure to keep the printer disconnected until you install the drivers. When you install the drivers, you should get a message, the printer is not connected. Connect the printer at this time.

Let me know what happens.

Rick

Problem solver of inkjet printer Dell Dell said Dell printers are not compatible for Windows 7 and found that the installation of Vista drivers in compatibility mode works well.

Tags: Windows

Similar Questions

  • Spooler does not, 1813 and 1053 error. HP PSC 2355.

    Hello.
    Details: Computer is a Dell Studio 1558, W7 professional, the printer is an HP PSC 2355.
    This is the second time I had this problem with Windows 7.
    I recently notified Microsoft on this issue.
    Problem has been resolved the first time, after the great frustration, by restoring the computer to the factory settings, having tried all fix and provided suggestions.
    This has solved the problem of spooler and I might add a printer (HP PSC 2355)
    Pilots where downloaded from the web, such as the printer did NOT appear in the drivers supplied with W7.
    Everything worked fine for 24 hours until what I was unable to print because of print spooler won't start do not.
    Naturally I'm very bored now.
    Please notify. Is this caused by the drivers of HP or is there a problem with W7 that need fixing.
    (Added only software which is not included with the computer is Office 2007, provided by my employer who has a site license and the viewer click).
    Your help is appreciated.
    Jeff.

    sfc/scannow seems to solve this problem.  There are some other post on the mistake of 1813.  I don't know how the system files are get damaged. Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1

  • Windows 7 - Printer Spooler problems. Allows to get noticed to add yourself to "need an answer" (error Code 1813, 1297, 1053 and 0x000006ba)

    OK I'm a newbie to this and certainly not a computer techy so please excuse the amateur descriptions.


    I have a new Dell laptop and have upgraded to Win 7 Home prem to Win 7 Professional. (Not homegroup) (wireless network) successfully with my old running Office XP and I now try to add the HP printer attached to the desktop computer networking too.

    I can 'see' the printer in the network map but when I double click to add get the message error Code 1813 then 1053.

    I was in services.msc and startup is on automatic. In the description field is "cannot read the description 1813 error code. Status field is 'stopped' when you try to start it you get "Windows didn't start this service on the local computer." Error code 1053 - service has failed to start in a controlled manner or timely.

    In all the forum etc., I read the only person who seems to have corrected it reinstalled the printer thingy spooler?. Recons HE he has been altered in its upgrade from Vista to Windows 7. I have no idea how to proceed.

    Help please.

    GBP

    and finally just in case Microsoft reads this - I've had the computer for 4 days and I just spent nearly $1,000 on the MS to see products that I can not print and this problem is not supported by Microsoft, unless I pay. I'm not impressed, even less when I see how many other people have problems.


    Try to run the System File Checker to check the alteration of system files - 1 Option to follow in the folliwng link:

    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  • I'm having problems with error 1053 (print spooler) message in Windows 7 and no solutions seem to work. There the up todate solutions/suggestions out there? Dave

    I keep losing the connection to my printer.

    I get the need to resume the spooler error message. Then, I get error 1053.

    I tried various fixes suggested, but nothing works.

    Any help out there!

    Dave.

    See http://support.microsoft.com/kb/2793718/en-us

    Use the 'light ' first FixIt mode.

    If the lighting mode does not work, use the full mode - but you will then need to reinstall your printer:

    The mode light will change the spooler that should not require the user to make changes. The full mode will restore the spooler to print to the default settings and require a reinstall of drivers for printing and printers.  All applications must be stopped before running the difficulty it Solution.

  • Devices and printers suspendusent/Print Spooler error causing printing issues

    Hello fellow forum participants and Rangers.

    As of recent, I had questions on our servers with regard to printing problems.  The problem would be to randomly appear and disappear without notice.  I tried to diagnose the problem by activating the event handler, but the event handler was not able to provide any specific error in addition "a timeout (30000 milliseconds) was reached while waiting for a response from the spooler service transaction.  Whenever I try to open "devices and printers", the window would without constantly/eventually without loading anything.  I would also add that the problem starts when the user connecting.

    I tried the things:

    (1) sometimes restarting the PC would magically make it work.

    (2) restart Printerspooler fix the problem

    (3) automatic setting rather than manual Bluetooth function has failed.  (has worked for most of the people similar/same problem).

    (4) we tried to reload the drivers.  Temporary solution, but the printing problem happen again.

    Any help would be highly appreciated and sorry for the wall of text.  This question led me into the wall!  Thanks in advance.

    PS. Windows 7 pro (32-bit) processor intel core 2 duo 2.2 GHz

    Hello SugardingIT,

    Thanks for posting your question on the Microsoft Forum.

    I would be grateful if you can provide us with the following information to help us better understand the issue.

    1. Did you do any hardware or software changes before this problem?
    2. Were you able to print before this problem?
    3. You are connected to the domain network?
    4. What is the brand and model of your printer and your computer?

    Try the steps in the following methods and see if it helps.

    Method 1

    This tutorial is designed to help you identify and fix common printer problems in Windows, including print errors, print spooler errors, and other issues that could prevent you from printing.

    Solve printer problems

    http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    Method 2

    If the problem persists, I recommend that you completely uninstall the part-time driver that has been installed on your computer and then download the latest driver on the printer again manufacturer site.

    Step 1: Try to remove the printer by following the steps described in the following Microsoft Article.

    http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

    Step 2: Find and install printer drivers in Windows 7.

    http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

    Please post back with all the necessary information and the result of the proposed suggestion and we will be happy to help you.

    Thank you.

  • DeskJet 3050 a J611 series: I received a 0XB8268688 error code and the printer is offline. How can I solve this?

    Word and Adobe tell me that the printer is offline.  I received the error code when I tried to turn the printer off.

    Hello

    Please try the steps below...

    1. While the printer turned on, unplug the power cord from the back of the printer.
    2. Turn off the wireless router.
    3. Wait 30 seconds.
    4. Connect the power cord to the printer. Look for the error.
    5. If there is ERROR, like you said, printer then needs to be REPAIRED.
    6. power on the router and look for the error. If there is ERROR, like you said, printer then needs to be REPAIRED.

    If there is NO error and the printer shows offline when printing then download and run the HP print and Scan Doctor www.hp.com/go/tools

  • Win7 print spooler error. Cannot install my printer.

    I bought a new Samsung Mini laptop with Win7 preinstalled.  I tried to install my normally (a fairly new Samsung CLP 315 Color Laser) and the system will not allow it.  I get the following error:

    Windows can't open add printer.  The
    local print spooler service is not running.
    Please restart the spooler or restart the
    machine.

    I rebooted the machine and got the same error.  I went to the services.msc file and attempted to start the spooler service to and I got the following error in the column "description":

    I tried to restart the spooler service to and I received the following error message:

    Windows could not start the spooler on Local computer service.

    Error 1053: The service did not demand launch or timely control.

    I tried to download the current driver more than Samsung.  I have read every thread repair throughout the web and tried a thousand different repair attempts.  I used http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html to analyze the files on my system.  I even bought the software UniBlue Registry Booster for $29.99 in order to eliminate the problem... and I'm here!

    I can't add a PictBridge compatible printer, not to mention my Samsung CLP 315, until the spooler service running.  I can't turn on the spooler service because Windows will not let me... I'm unable to print and I am unable to do anything.

    I'm a PC and I want to that I was a MAC right now!

    Can anyone help?

    most likely the spooler is a failure after install the driver.  Because the spooler is not running, you will need to check what drivers. print processors and language monitors that the spooler is trying to load.  Bruce has a few instructions.  I guess you ran the utility software troubleshooting print already.

    http://members.Shaw.ca/bsanders/CleanPrinterDrivers.htm
    Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1

  • Print Spooler error 1068: the dependency service or group could start. __

    I tried - unsuccessfully - restart the print spooler on a box of XP with SP3.  I read the previous posts for this error and this box refuses to restart the service.

    Is there an easy way to fix this without reverting to a system reset?  Can I run a repair?  If so, it will fix the problem?  I tried to run a restore of the system to a previous date and who could not do anything for me either.

    When you attempt to start the Print Spooler Service, error 1068 means "the dependency service does not exist. the dependency service or group was able to start. »

    Depending on your environment and your type of printer installed, your Print Spooler Service will have other dependent services that must run before the Print Spooler Service starts.  If the dependent services do not work, you will see an error 1068 or a similar message on the dependent services when you try to start the Print Spooler Service.

    Some Lexmark printers add their own XP services and start the Print Spooler Service, lists them as dependencies and that is why these Lexmark Services must run before the print service spooler will begin.  It may be listed as the LexBce Server.

    You now or have you ever have all installed Lexmark printers?  If Yes, do you still use Lexmark printers?

    Depending on your printing environment, if you use another type of printer, you can have other Service listed tab in the Print Spooler Service dependencies.

    Use the Applet of Services XP to check the dependencies of print spooler and options.

    Click Start, run and enter in the box:

    services.msc

    Click OK to open the Services Applet.

    Locate the Print Spooler Service, right-click, choose Properties, and then look at the Dependencies tab.  Services listed there must run before the Print Spooler Service starts.  If they don't, you'll get an error 1068 or a similar message on the dependent services when you try to start the Print Spooler Service.

    You should always see the service remote procedure call (RPC) and maybe a few others depending on the type of printer that you have installed (Lexmark printers can add some dependency Services to your configuration of XP).  All dependent services must run before the Print Spooler Service starts.

    Dependent Services may vary according to the type of printer that you have installed.

    The RPC service is also required for many other things to work properly and is usually still running and the autostart value.

    If the RPC Service does not work and does not start automatically, you can have other problems, but start with the easy stuff first.

    Of the Services Applet, find the service remote procedure call (RPC) and if it does not, right-click and start it and set it to automatic.

    Then find and all the other print spooler dependency services listed in the Print Spooler Service Dependencies tab.  They will be lance automatically the next time you reboot your system (if that is your desire), set the startup type for these Services to automatic.

    When everything works as you want, restart and check your Services again to be sure that they start correctly and solve any addition
    questions.

    If the remote procedure call (RPC) service is not listed as a dependency for your Print Spooler Service, you must inform XP that the print spooler service depends on the RPC service.

    Click Start, run, and in the box type (including important space after the "equal" sign):

    dependent on the spooler of sc config = RPCSS

    Click OK to assign the RPC service for the print spooler service, and then make sure that the RPC Service is running and start your Print Spooler Service.

    If you still can not understand it, react with the items that you see the tab of the Print Spooler Service dependencies.

    Don't forget to restart and check that everything works correctly after each adjustment.

    Please note that using the above command will effectively remove all the current (and perhaps old) Print Spooler dependency assigned for the Print Spooler Service and assign it only dependent on the RPC Service.  It would be 'normal '.

    The dependence of CPP Service would be typical of most facilities, or after you have uninstalled all the time some printers (Lexmark), but your printer may have a few other dependencies.  If it still does not respond, we'll fix it!

    Do, or do not. There is no test.

    I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

  • XP Printer Spooler error

    Original title : XP Printer Spooler error - tried

    Hello

    It's my client computer, so I'm not always in front of her, most work at home.  It has a desktop with XP and a HP printer.
    I tried the following:

    http://support.Microsoft.com/kb/810894

    http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

    http://forums.techarena.in/Windows-XP-support/1040367.htm

    I also tried to uninstall the printer, what has not worked and went to the HP website and downloaded the latest driver update and the

    the entire facility was updated too.

    I rebooted several times, all cleaned and everything, I'm stumped.  Any who have suggestions or you know why nothing works?

    Any help would be greatly appreciated!

    Thank you!

    Holly

    Actually, no.  What I was referring to came from http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm .

    Usually, this will do a good job of cleaning of the drivers with Windows 2000 and later versions (not the case with Windows NT 4).

    If the print spooler service is not running, or you want to make sure that there are no remains of printer driver, follow the instructions below, or use the cleanspl.exe of Windows 2000, XP, or 2003 Resource Kit (http://www.microsoft.com/downloads/details.aspx?FamilyID=9d467a69-57ff-4ae7-96ee-b18c4790cffd&DisplayLang=en).  cleanspl.exe Windows 2003 Resource Kit tools works on Windows XP.

    Some information about cleanspl.exe:

    • cleanspl.exe did a very thorough job of cleaning the print spooler stuff, but it does not remove the dependence of the spooler service on the Lexmark service (see Special on Lexmark printer drivers information).

    • You can use it to clean the stuff of spooler on another computer (i.e. remote).

    • When you run it, it asks you if you want to remove things that are actually delivered (and installed by default) with Windows.  In most cases, you need No corresponding guests (you won't remove the Port TCP/IP Standard or BJ language monitor).

  • Printer Spooler error

    My print spooler is set to start and automatic. My HP 810 is set as default printer - its has worked many years.

    Error code I get is illustrated below

    Printers still do not work. These are the error messages I get, how can I solve the problem: szAppName: spoolsv.exe szAppVer: 5.2.3790.4759 szModName: ZSR. DLL

    Hi workinghardAZ,

    ·         Remember to make changes to the computer, after which the issue started?

    I suggest you try the steps from the following links in the article and see if it helps:

    Printer in Windows problems

    You cannot print and you receive the error message "Spooler subsystem app has encountered a problem and needs to close."

    I hope this helps.

  • How to clear a spooler error? My printer stopped working because of this

    OriginalTitle: Impression DIF

    I get an error of queue when you try to print, and it does not recognize the same printer I used for at least one year

    Hello

    Check with the printer manufacturer for updated drivers and support for known issues.

    Check chan seen message here - one of the highest.

    fixed spooler subsystem app stopped working
    http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

    ===================================

    If the above didn't help:

    Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
    the latest driver).

    Check Mr. Fixits here and if you use the other methods go back and try again later.

    Problems of print and error - a Mr Fixit of printing
    http://support.Microsoft.com/GP/printing_problems

    Solve printer problems - a Mr Fixit
    http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

    ------------------------------------------------------
    Logon as administrator

    Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

    You can copy and paste each line except those brackets and press ENTER after each.

    net stop Spooler

    (echo suppression of all print jobs)<-- you="" should="" see="" this="">

    ping localhost n 4 > zero

    del/q %SystemRoot%\system32\spool\printers\*.*

    net start Spooler

    (sound Done!)<-- you="" should="" see="" this="">

    ping localhost n 4 > zero

    Another way
    http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

    Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
    http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

    If you use Control Panel - Classic - printers

    Try after unplugging your printer if necessary.
    -------------------------------------------------------------

    Also check the spooler print and its dependencies and addictions Service.

    The value of all Services back to their default values.

    Start - type into the search box-> Services find top - make a right click on - RUN
    AS AN ADMINISTRATOR

    BlackViper - for Vista SP1 - Services - all return to their default values.
    http://www.blackviper.com/2008/01/28/black-vipers-Windows-Vista-Service-Pack-1-service-configurations/#more-3020

    BlackViper - for Vista SP2 - Services - all return to their default values.
    http://www.blackviper.com/2009/05/31/black-vipers-Windows-Vista-Service-Pack-2-service-configurations/#more-2991

    How difficulty Windows Vista print spooler starts do not
    http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

    ------------------------------------------------------------

    Check this thread if necessary - to stop and erase the spooler

    http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

    and here
    http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

    ------------------------------------------------------
    Clean the General corruption and repair or replace the damaged/missing files.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    CheckDisk (chkdsk) runs at startup.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • Printer spool error 'local print spooler service is not in the course of execution-restart spooler'

    Coil Sprinter restart

    my computer crashed few, but I lose my software.  I replaced my card m? ire and a neighbor, HE got most of my programs and the work of electronic mail.  I'm having a problem with my printer spool.  The message I get is "local print spooler service is not currently running-restart spooler. And 0 x 80040707 error DLL function call crashed: Braddprt.check local port. "Then, I got an update that does not work for my brothers printer.  Can someone help me?

    Hi Gin99,

    ·         The printer is already installed?

    ·         Or do you have the error during the installation of the printer software?

    Try the following.

    Method 1: Run the next Fixit tool and see if it helps.

    Problems printing and printing errors

    Method 2: Follow the steps in the article mentioned below.

    Printer in Windows problems

  • The print spooler errors

    print spooler will not stay

    Hello

    1. could you give me the full error message?
    2. based on which application you want to print?
    3. What is the brand and the model number of your printer?
    4. are you able to print the test page?

    Method 1.
    First, let us run the fix in the article below and check.
    Problems printing and printing errors
    http://support.Microsoft.com/GP/printing_problems
     
    Method 2.
    Clear printer spooler files and activate the spooler service
    a. Click Start, type "Services.msc" (without the quotation marks) in the Open box and click OK.
    b. double click on "Printer Spooler" in the Services list.
    c. click on stop, and then click OK.
    d. Click Start, type "% WINDIR%\system32\spool\printers" in the opened window and delete all the files in this folder.
    e. now restart the print spooler service and check.
     
    For more information and procedures, refer to the article below.
    Solve printer problems
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems
    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • The 1068__I spooler error do not know how fix this problem can anyone help?

    I get the spooler error 1068, I said buying registrybooster2010 but which costs £20.00 and nothing helped!  I need to get this sorted ASAP, can anyone help please

    Hello

    Registry Booster and similar programs are all hype and snake oil, they can fix practically anything and
    often the cause of big problems on their own. Request your refund.

    Check chan seen message here - one of the highest.

    fixed spooler subsystem app stopped working
    http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

    ===================================

    If the above didn't help:

    Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
    the latest driver).

    Check Mr. Fixits here and if you use the other methods go back and try again later.

    Problems of print and error - a Mr Fixit of printing
    http://support.Microsoft.com/GP/printing_problems

    Solve printer problems - a Mr Fixit
    http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

    ------------------------------------------------------
    Logon as administrator

    Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

    You can copy and paste each line except those brackets and press ENTER after each.

    net stop Spooler

    (echo suppression of all print jobs)<-- you="" should="" see="" this="">

    ping localhost n 4 > zero

    del/q %SystemRoot%\system32\spool\printers\*.*

    net start Spooler

    (sound Done!)<-- you="" should="" see="" this="">

    ping localhost n 4 > zero

    Another way
    http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

    Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
    http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

    If you use Control Panel - Classic - printers

    Try after unplugging your printer if necessary.
    -------------------------------------------------------------

    Also check the spooler print and its dependencies and addictions Service.

    Print Spooler service
    http://www.blackviper.com/WinVista/services/Print_Spooler.htm

    How difficulty Windows Vista print spooler starts do not
    http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

    ------------------------------------------------------------

    Check this thread if necessary - to stop and erase the spooler

    http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

    and here
    http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

    ------------------------------------------------------
    Clean the General corruption and repair or replace the damaged/missing files.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    CheckDisk (chkdsk) runs at startup.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Oxooooo6ba print spooler error

    Just added printer to new computer

    Hello

    Check with the manufacturer of the printer for drivers updated, their support and forums for known
    questions.

    --------------------------------------------------------

    Use this method to clear the spooler and then uninstall and reinstall your printer (check with the)
    machine for the most recent driver).

    Check Mr. Fixits here and if you must use other methods to go back and try them
    again thereafter.

    Problems of print and error - a Mr Fixit of printing
    http://support.Microsoft.com/GP/printing_problems

    Solve printer problems - a Mr Fixit
    http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

    ------------------------------------------------------
    Logon as administrator

    Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

    You can copy and paste each line except those brackets and press ENTER after each.

    net stop Spooler

    (echo suppression of all print jobs)<-- you="" should="" see="" this="">

    ping localhost n 4 > zero

    del/q %SystemRoot%\system32\spool\printers\*.*

    net start Spooler

    (sound Done!)<-- you="" should="" see="" this="">

    ping localhost n 4 > zero

    Another way
    http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

    Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
    http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

    If you use Control Panel - Classic - printers

    Try after unplugging your printer if necessary.
    ------------------------------------------------------------

    Check this thread if necessary - to stop and erase the spooler

    http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

    and here
    http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

    ------------------------------------------------------
    Clean the General corruption and repair or replace the damaged/missing files.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    CheckDisk (chkdsk) runs at startup.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    ==========================================

    Start-up services - type in the search - box found at the top of the list - made right click on - RUN AS ADMIN

    Check the default settings of spooler print and dependencies and their dependencies
    http://www.blackviper.com/WinVista/services/Print_Spooler.htm

    Check all the default service settings - reset ALL services back to default values
    http://www.blackviper.com/WinVista/servicecfg.htm

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

Maybe you are looking for

  • Install Mac OS on new HD says 37 hours!

    Install Mac OS on new HD says 37 hours: I recently bought a Samsung SSD 512 850 Pro and decided to start from scratch. Following the instructions from Apple... boot to utility run recovery disc and formatted... everything is good... then to install M

  • Since the installation of FF36beta to win 10, saving images has problem

    Hello Installation FF36beta, recording images having the problem, so when I select the folder and click on save, it will goes to savings but not saved and all time show 'unknown time remaining' and not made progress. but when I close Firefox, the nex

  • Please help me good people.

    The guy uses a presar io CQ58 NOTEBOOK PC... The PC told me three times to create a backup one i made, then aftr three days, the PC was stop by a display message wit a blue background. Then I ddnt read as wel wel very messege bt it was somthng like r

  • two dumb questions - file header and time saving

    1. How can I add a header in writing worksheet file.vi? (For now, it only stores a number of columes of data with each colume representing a single channel. "I want to put a header at the top that shows the names of the channels).2. can I store the d

  • How can I upgrade my insttaled windows xp professional 2002 service pack 3 for windows 7

    How can I upgrade my Insttaled Windows Xp 2002 service pack 3 for Windows 7 Proffessional