1Z1 - 100 (Beta) system Oracle Linux 5 Administration and 6

Similar Questions

• PS6100 with firmware version 7.0.5 + Oracle Linux 5.10 + multipathd question

  I try to use the multipath regular linux (device-map-multipath) with my PS6100 and it doesn't quite work. It gives me "readsector0 Auditor reports path is down," "pdu (op 0 x 50000370 itt 0x1) rejected.» Code 0 x 4 reason"errors and my iSCSI connections are reset every few seconds. My OS is Oracle Linux 5.10 (fully updated) and my PS6100 is running with the latest firmware version 7.0.5.

  The latest kit from Dell STRUCK for Linux, 1.3.0-2, works fine on this machine, but the reason why I'm putting multipathd is to compare the performance between the two solution. If we look at the other system we have that run the ordinary multipathd, paths of Dell could give us performance. We doubt it, but we want to do the tests and a comparison of its performance stats.

  We have another server which has almost the same configuration (same OS connected to an another PS6100) and multipathd works well on this one. And one of the difference between this system and no work is that the PS6100 is running on firmware 5.2.5 instead of 7.0.5. I'd be willing to downgrade firmware (this unit is not yet in production, and I don't mind losing the data on it) but I'm not find anything on the internet that show how other that of the "call from Dell and it'll do it for you. If the only thing you need to do is a special command in the CLI then why there is no documentation on this subject?

  So I wonder if anyone here runs a firmware equallogic 7.0.5 with the multipathd of linux and a RedHat 5 of operating system (Oracle Linux, Redhat, CentOS, etc.)?

  Hello

  It is documented in the release notes for the firmware 7.0.x.  There is a bug in Multipathd, which is exposed with 7.0.x. firmware.   Replace readsector0 TUR or ARM and restart multipathd.  Protocol errors will stop and Linux MPIO works perfectly.

  Kind regards

• What is this new SQL Beta - 1z1 - 071 - 2 SQL - Oracle Database SQL 12 c

  Hello

  It's confusing.

  This looks like a 2nd review SQL for Oracle 12 c.

  What is this new SQL Beta - 1z1 - 071 - 2 SQL - Oracle Database SQL 12 c

  Can someone explain.

  Roger

  OK - I guess I should have held off a few hours before my previous answer.  I just got an email in the Certification of Oracle program manager. Now, I have inside information.

  1Z0-071 is a SQL new test and the role it plays is between that of the review of databases SQL and SQL Expert.  Specifically, unlike review of databases SQL, passing it will give proof of the OCA for people who spend. I don't know more than that yet.  The review details page is not available and if the subjects are currently a grey area for me.  I'll probably create a blog on the review, if I can get a few details about it.

• VM Player 3: VM Oracle Linux 5 connection errors

  People,

  Hello. I am running Oracle Linux 5 VM Player 3. The host OS is Windows 7.

  3 VM and Oracle Linux player 5 worked properly for a long time. Today, it happens a strange error below:

  After starting Oracle Linux 5 VM Player 3, I type in user name and password to connect. It takes a few minutes abnormally. 6 mistakes then comes one by one below:

  1) an error occurred during the loading or saving of the configuration information for Nautilus. Some of your configuration settings may not work correctly.

  I click on the "Détails" button and the following message appears:

  Failed to contact configuration server; Among the possible causes are that you must enable TCP/IP for ORBit network features, or you have NFS locks defective due to a failure of the system.

  see http:// www.gnome.org/projects/gconf/ for more information.

  Details-

  1: IOR file "/ tmp/gconfd-user/locking/ior" No. successfully opened. No gcond located: no such file or directory.

  2: IOR file "/ tmp/gconfd-user/locking/ior" not open successfully, no location gconfd: no such file or directory.

  2) an error occurred during the loading or saving of the configuration information for the Power Manager. Some of your configuration settings may not work correctly.

  In the popup Window Power Manager, there is a yellow triangle with black!

  The message is: the GConf, schema Setup error battery_low_percentage cannot be zero.

  3) an error occurred during the loading or saving of the configuration information for print notifier. Some of your configuration settings may not work correctly.

  I click on the 'Détails' button, the message is the same with error 1) Details.

  4) an error occurred during the loading or saving of the configuration information for gnome-settings-daemon. Some of your configuration settings may not work correctly.

  I click on the 'Détails' button, the message is the same with error 1) Details.

  5) an error occurred during the loading or saving of the configuration of gnome-sessioninformation. Some of your configuration settings may not work correctly.

  I click on the 'Détails' button, the message is the same with error 1) Details.

  6) there was an error at startup of GNOME Settings Daemon.

  Some things, such as themes, sounds or background settings can not work properly. The last error message was:

  Has not received a response. Possible causes include: the remote application has not sent a response. Blocked bus message security policy response. The response period expired, or the network connection was broken. GNOME will always try to restart the settings Daemon next time that you log on.

  After a few minutes, desktop screen becomes black background with all the icons on it.

  But no bar. I can't click anywhere to run.

  This is the first time for me to cope with such a strange mistake. I do not understand what causes this kind of errors.

  I checked VM > Settings > hard drive > capacity:

  Current size: 96.9 GB

  Free system: 41.7 GB (there is free space on the Windows 7 host drive)

  Maximum size: 100 GB

  I created the virtual hard disk for Oracle Linux 5 as 100 GB. The current size of 96.9 GB indicates 96.9 GB 100 GB has been used. So, 100 GB - GB 96.9 = 3.1 GB.

  My questions are:

  (1) how much free disk space is required to start the Oracle VM Linux 5?

  (2) what are the causes of the 6 mistakes when connect to Oracle Linux 5?

  (3) does "not enough disk space of vm" cause 6 mistakes when connecting Oracle Linux 5?

  (4) how to fix errors?

  Thanks in advance.

  Hello

  For the question on what is LVM see: Logical Volume Manager (Linux) - Wikipedia, the free encyclopedia

  For tips on how - to use LVM, please see this article:

  Linux Sysadmin: How to manage LVMs with a GUI

  Before you can add more space, you need to resize your virtual drive and make more great or you will need to add another virtual disk to the virtual machine.

  The/3 GB to use is only available for the root user as it is in the safety margin of 5%.

  If Linux, UI drag / move uses a temporary folder, then is under/tmp

  To find out where disk space is used, the commando of the can be used.

  Use the command "of the man" learn more about the options.

  for example.

  of the - SH/tmp

  will show how using the tmp folder.

  The - SH/home

  shows how much space takes the home folder

  etc...

  --

  Wil

• Can't access recently installed OEM12c on Oracle Linux (x86_64)

  Hello, first time poster on the oracle in desperation forum :-). I was asked to get OEM 12 c and running on a pile of sand of linux for evidence concept while my boss and sys ADM work on Linux hardware of pandering and aligning software support. Our courses are Oracle support for HP-/ uxs and we intend to move away from HP - UX to Oracle Linux, so at this point, I don't think I can connect an SR for this strange problem. Anwway, la I have installed later and largely OEM 12 c (12.1.3) on Oracle Linux. I can stop/restart agent WHO... etc with no problems. The ONLY problem is when I went to OEM console URL based on the given paths (https), I'm going to "page cannot be displayed". I tried IE and Chrome, I got nowhere, and you'd be grateful pointers! Here is the output of the status of who:

  Oracle Enterprise Manager Cloud control 12 c Release 3

  Copyright (c) 1996, 2013 Oracle Corporation.  All rights reserved.

  Enter the password to Root of Enterprise Manager (SYSMAN):

  Console server host: xxxxxx.xxxxx.xxx

  Console HTTP port: 7790

  Console HTTPS port: 7803

  Download HTTP port: 4890

  Download HTTPS port: 4904

  Instance of EM homepage: / yyyyy/yyyyy/gc_inst/em/EMGC_OMS1

  Location of the journal WHO directory: / yyyyyy/yyyyy/gc_inst/em/EMGC_OMS1/sysman/log

  SGC is not configured with the PES or virtual host name

  Download of the agent is locked.

  SGD console is locked.

  CA active ID: 1

  Console URL: https://xxxxxx.xxxxx.xxx:7803 / em

  Download URL: https://XXXXXX.xxxxx.xxx:4904/empbs/upload

  WLS domain information

  Domain name: GCDomain

  The host server administrator: xxxxxx.xxxxx.xxx

  Admin Server HTTPS Port: 7103

  The server administrator is running

  Information managed server

  Managed Server Instance name: EMGC_OMS1

  Managed Server Instance host: xxxxxx.xxxxx.xxx

  WebTier is in place

  Management Server Oracle is in place

  Hello

  I guess you are trying to access the URL OEM (https://xxxxxx.xxxxx.xxx:7803 / em) your browser machine.

  You will need to check if there is a connectivity problem between the browser and the machine of the WHO. A firewall can be a problem. You can check with your system administrator.

  In addition also check the status of iptables WHO machine. If it is, then stop it and then try to access the OEM console again.

  Command to check the iptables: /etc/init.d/iptables status

  Order to stop iptables: stop /etc/init.d/iptables

  I hope this helps. Let us know.

  Kind regards

  Experimentations

• Use of the CPU 100%, the system crashes often

  Hi, I'm an IT support Engineer, we have a Department in our company, and last week two, the employees of this Department are problems, 100% usage and the system freezes. I formatted and scan too after I got some biscuits that has been deleted by Symantic, but always facing the problem, maybe a shared folder got infected and they use that shared folder, he gots system this question.

  Please let me know what is the solution, there is no particular process causing the CPU usage.

  Operating system is Win 7 64 bit and antivirus is the Symantec Endpoint.

  Hi, I'm an IT support Engineer, we have a Department in our company, and last week two, the employees of this Department are problems, 100% usage and the system freezes. I formatted and scan too after I got some biscuits that has been deleted by Symantic, but always facing the problem, maybe a shared folder got infected and they use that shared folder, he gots system this question.

  Please let me know what is the solution, there is no particular process causing the CPU usage.

  Operating system is Win 7 64 bit and antivirus is the Symantec Endpoint.

  If the 100% CPU usage is split into several processes?
  ("there is no particular process causing the CPU usage)

  Use Autoruns to understand this all starts when the computer not / when they connect. Look for whatever it is you do not know using Google (or ask here.) You can hopefully figure out if there are things from when thecomputer is (or they connect) that they do not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using resources without reason.

  You can download and use Process Explorer to see exactly what fits the time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.  This could better focus in on what is actually using the time processor.

  What this for any other account?  What if it is not connected to the network?

• The Oracle Linux 5.10 ADR 11.1.1.6.0 installation problem

  People,

  Hello. I have implemented PeopleSoft Campus Solution 9.0 revision 5 for a University.

  I need to create the web page application online for future student to apply for admission.

  My installations of PeopleSoft are below:

  Server machine: Oracle Linux 5.10 (64-bit)

  Client computer: Windows XP Professional (64 edition) with the Internet Explorer browser

  Architecture Internet Oracle Linux 5.10 Server:

  (1) database server: Oracle Database 11 g

  (2) the server application: Tuxedo 11 g

  3) web server: logic of Web 10.3.6.0

  (4) browser: Firefox Mozila

  (5) two Instances of huge database on the database server: 8.53 PeopleTools and PeopleSoft Campus Solution 9.0 R5

  I just finished installing Oracle ADR (Application Development Runtime) 11.1.1.6.0 with Weblogic 10.3.6.0 in Oracle Linux 5.10 Server machine. In step 3 of 8 required checks, impossible to pass the 2 items below:

  (1) verification of recommended operating system Packages (no pass)

  (2) verification of the parameters of the kernel (no pass)

  Oracle Linux 5 is certified with ADR and prerequisite verification certificate of operating system is spent, so, I keep the installation to the end successfully.

  My question is:

  2 items not moved will not affect the development of applications or performance later? If so, how to fix?

  Thanks in advance.

  (1) the parameters are necessary, but the system is running with a lower number. Right in the middle of the execution of your application, enter you the maximum and your system stops. It is best to set the values for the given numbers. When you run the Setup program and go to the test page and the test fails, you should be able to click the test below and the installation should continue. If the continue button is not active, you must correct the error.

  (2) I don't have an oel5 system. Missed, you have not all if necessary values in your limits.conf file? The syntax for the Scriptures is essential. Look at the other lives in the files. How do they look like?

  I guess you need to add a space after the * who would set the setting for all users, or set you it only for user oracle, which is the one you normally install the software with. Check out the tutorial I posted the link with my last post. You may need to add the line /etc/pam.d/login and etc/pam.d/sshd.

  Timo

• Install the ADF 12.1.3.0 essential WegLogic 11 g and Oracle Linux 5

  People,

  Hello. I install ADF essential 12.1.3.0 with WegLogic 11 g with Oracle Linux 5 operating system.

  The WebLogic 11 g and JDK 1.7 have been installed in my machine and work properly for a long time.

  
  

  I downloaded Oracle ADF critical 12.1.3.0 on http://www.Oracle.com/technetwork/developer-tools/ADF/downloads/index.html .

  The tutorial http://orafapp.blogspot.com/2014/07/install-and-configure-ADF-development.html installs ADF with WebLogic 12 c and 3 parts as below:

  Part i: install ADF and set the field of the logic of the Web.

  Part II: creating the RCU for ADF.

  Part III: Configure the WebLogic domain.

  There are 3 files in the package: adf - essentials.zip, adf-essentials-customer - ear.zip and adf-essentials-client - war.zip

  I unzip the file "adf - essentials.zip" and run the file .jar as below:

  java $-jar oracle.xdb_12.1.0.jar

  Error message: cannot load oracle.xdb_12.1.0.jar Main-class manifest attributes

  My questions are:

  First of all, I have to follow the 3 parties above to install ADF 12.1.3 essential for WebLogic 11 g with Oracle Linux 5?

  Second, how to solve the error message above? People allow a tutorial for me to install?

  Thirdly, what are the client 2 client-essentials-adf - ear.zip and adf-essentials-customer files - war.zip do?

  Thanks in advance.

  First you read for example http://docs.oracle.com/cd/E28280_01/doc.1111/e14860/products.htm#FMWLC109

  to find out what license you need, then you buy a license. Discover what you need is the hardest part

  As I said, you must call an OrOracl sales representative or an Oracle partner who can help you.

  Timo

• Oracle linux 7 with Oracle 12 c, it is necessary GUI?

  I will install Oracle Linux 7 and I would get a minimal installation, then I'll install the latest version of the Oracle server that is version 12 c.

  Can I avoid to install GUI? I am interesting to the environment of the text.

  Which type of installation that I can choose? I would choose "minimum installation"

  -Minimal Install

  -Multi server

  -File and print server

  -Web server based

  -Virtualization host

  -Server with a graphical interface

  Where can I find the requirements for the operating system for this version of Oracle?

  Is there before installation for Linux Oracle packages list to the 12 c features Oracle database?

  Why you post the same question in different forums? You have already received a response.

  https://community.Oracle.com/thread/3797527

  https://community.Oracle.com/thread/3797436

  Why is it so hard to understand? The Oracle for Linux database setup is a Java based installer that requires X Window. No X Window - no graphical interface. There is no text based installer. If you do not use any GUI, do a silent install, you can look in the documentation.

• I got an error grid Infrastructure installation Oracle 11 GR 2 (11.2.0.4) for a stand-alone server on Oracle Linux 7

  I got an error grid Infrastructure installation Oracle 11 GR 2 (11.2.0.4) for a stand-alone server on Oracle Linux 7

  It's my environment:

  VM VirtualBox

  OS: Linux to Oracle 7

  RAM: 2G

  CPU: 1 outlet | 2 carrots

  OS packages for the needs of the DB: all except pdksh. (installed in ksh). Jut ignored.

  Oracle software version: 11 GR 2 (11.2.0.4) Oracle grid Infrastructure

  Installation type: SServer tandalone.

  The installation user: uid = 501 (oracle)

  installation groups: gid = 501 (oinstall) groups: oinstall, dba, oper, asmadmin, asmdba, asmoper.

  Put ASM implementation with Linux e/s Standard (No. ASMLib).

  
  

  The virtual machine has 3 disks attached.

  
  

  Features: / dev/sdb, / dev/sdc, / dev/sdd

  
  

  I ran to related records:

  
  

  # / bin / / dev/raw/raw1 gross/dev/sdb1

  # / bin / / dev/raw/raw2 gross/dev/sdc1

  # / bin / / dev/raw/raw3 gross/dev/sdd1

  
  

  # raw - qa

  / dev/RAW/raw1: linked main 8, minor 17

  / dev/RAW/raw2: linked main 8, minor 33

  / dev/RAW/raw3: linked main 8, minor 49

  
  

  Also, I have configured the following command to set permanent configuration:

  #vi /etc/udev/rules.d/99-vmware-scsi-udev.rules99-vmware-scsi-udev.rules

  ACTION == "add", KERNEL == "sdb1", RUN += "/ bin/raw/dev/raw/raw1 %N".

  ACTION == "add", KERNEL == "sdc1", RUN += "/ bin/raw/dev/raw/raw2 %N".

  ACTION == "add", KERNEL == "sdd1", RUN += "/ bin/raw/dev/raw/raw3 %N".

  # set permissions on these discs for the owner of the Oracle user.

  ACTION == "add" KERNEL == "" raw * ', OWNER is 'oracle', GROUP is 'oinstall' MODE is "0660" "

  
  

  NOTE: when I run # ls - lrt/dev/sd *, I - I don't know if the disks has permissions icies because they are on the way to access/dev/raw/raw *.

  
  

  BRW - rw-. 1 root disk 8, 16, 19 August 01:54 / dev/sdb

  BRW - rw-. 1 root disk 8, 17, 19 Aug 01:54 / dev/sdb1

  BRW - rw-. 1 root disk 8, 32 19 August to 01:54 / dev/sdc

  BRW - rw-. 1 root disk 8, 13, 19 Aug 01:54 / dev/sdc1

  BRW - rw-. 1 root disk 8, 48-19 August to 01:54 / dev/sdd

  BRW - rw-. 1 root disk 8, 49-19 August to 01:54 / dev/sdd1

  
  

  This happens whenever I restart the server.

  
  

  But authorities are good when I run # ls - lrt/dev/raw/raw *.

  
  

  CRW - rw-. 1 oracle oinstall 162, 0 19 Aug 01:54 / dev/raw/rawctl

  CRW - rw-. 1 oracle oinstall 162, 0 19 Aug 01:54 / dev/raw/raw1

  CRW - rw-. 1 oracle oinstall 162, 0 19 Aug 01:54 / dev/raw/raw2

  CRW - rw-. 1 oracle oinstall 162, 0 19 Aug 01:54 / dev/raw/raw3

  
  

  Problem: when running script $GRID_HOME/root.sh.

  Adding Clusterware entries to inittab

  ohasd could not start

  Cannot start the Clusterware. Last 20 lines of the trace log alert:

  2015 08-19 02:15:24.442:

  [client (7260)] CRS-2101: the RSC has been formatted using version 3.

  2015 08-19 02:15:28.238:

  [client (7283)] CRS-1001: the OCR has been formatted using version 3.

  ohasd could not start /u01/app/oracle/product/11g/grid_1/crs/install/roothas.pl 337 line, line < ALERTLOG > 4

  failed execution of /u01/app/oracle/product/11g/grid_1/crs/install/roothas.pl of the/u01/app/oracle/product / 11 g/grid_1/src/install

  Please help me.

  Geraldo Peralta

  Using RAW could be the problem. I'm not sure someone who has used Virtual Box with raw disks for their RAC testbed. Most people use ASM. I've seen a few people use NFS as well. You'll also want to stay away raw because that which is frowned upon in 11.2. See http://docs.oracle.com/cd/E11882_01/install.112/e41962/whatsnew.htm#RILIN931

  Under the Options deprecated for Oracle RAC 11 g Release 2:

  "Installation of files on raw devices is no longer an option available during installation. You must use a shared file system, or using Oracle Automatic Storage Management. »

  Here's how to configure RAC on my laptop with Virtual Box: http://www.peasland.net/2015/04/23/oracle-rac-on-my-laptop-with-virtual-box/

  HTH,
  Brian

• Details on the implementation of shared memory to set memory_target on Oracle Linux

  Hi all.

  I have a database of Oracle 11 g Rel2 (11.2.0.4) 64-bit running on Oracle Linux 5.8 64-bit.

  Several notes on MOS, must properly configure the shared memory to make use of automatic (memory_target) memory management.

  On these notes basically to allocate memory: Mount size of t tmpfs-o shmfs = 1073741824/dev/shm

  And keep the overall starting value by adding an entry in/etc/fstab: shmfs/dev/shm tmpfs size = 1073741824 0

  My doubt is that oracle Linux uses tmpfs instead of shmfs:

  [oracle@union ~] $ df-h/dev/shm

  S.ficheros Tamaa±o Disp Uso % Montado used in

  tmpfs 7, 9G 0 7, 9G 0% / dev/shm

  [oracle@union ~] $

  [oracle@union ~] Mount $

  / dev/map/VolGroup00-LogVolroot on / type ext3 (rw)

  proc on/proc type proc (rw)

  Sysfs on/sys type sysfs (rw)

  type devpts on/dev/pts devpts (rw, gid = 5, mode = 620)

  / dev/sda1 on/U01 type ext3 (rw)

  / dev/sdb1 on / boot type ext3 (rw)

  tmpfs on/dev/SHM type tmpfs (rw)

  None on/proc/sys/fs/binfmt_misc type binfmt_misc (rw)

  sunrpc on/var/lib/nfs/rpc_pipefs type rpc_pipefs (rw)

  / dev/sdc1 on/media/respaldos type vfat (rw)

  [oracle@union ~] $

  [oracle@union ~] $ cat/etc/fstab

  / dev/VolGroup00/LogVolroot / ext3 defaults 1 1

  LABEL = / u01/U01 ext3 defaults 1 2

  LABEL = / boot/boot ext3 defaults 1 2

  tmpfs/dev/shm tmpfs defaults 0 0

  devpts/dev/pts devpts gid = 5, mode = 620 0 0

  Sysfs/sys sysfs defaults 0 0

  proc/proc proc defaults 0 0

  / dev/VolGroup00/LogVolswap swap swap defaults 0 0

  As you can see it's ride on tmpfs/dev/shm tmpfs defaults 0 0

  
  

  So the question is: is it the same? is tmpfs just a label? After all this is pointing to/dev/SHM and tmpfs.

  
  

  Best regards, Luis.
  

  I have this line in/etc/fstab on OEL 6.5 system that I use now to give me 4 GB shared memory:

  tmpfs

  / dev/shm

  tmpfs defaults, size = 4000 m

  0 0

• EBS 12.1.1 Oracle install on Oracle Linux 6.6 x 86-64 bit

  I downloaded Oracle EBS 12.1.1 for Linux x 86 64-bit delivery; Oracle Linux version 6.6 as OS guest is Windows 7 as host; md5sum to verify the integrity of files downloaded from the EBS as by Doc ID 802195.1.  StartCD, error message for each file is: FAILED open or read.  I converted the file using the command dos2unix, tried for both versions: 12.1.1.9 and 12.1.1.13 but the problem persists.

  For other directories, got the result of following checksum:

  oraDB/Disk1/dbts/stage/db42_ctx.zip: FAILURE

  oraDB/Disk1/dbts/stage/db43_ctx.zip: FAILURE

  oraDB/Disk2/dbts/stage/db41_ctx.zip: FAILURE

  File Linux64_part_overview.txt shows that these files belong to V15679 - 01_1of3.zip, but in the circles of the delivery, this file does not exist.  files of oraDB in EBS 12.1.1 for Linux x 86-64 in V35224-01_1of3, V35224-01_2of3 and V35224-01_3of3.  This means checksum files are not updated?  I have re downloaded these files but the problem persists.

  I tried to download and check the media several times but the result was even listed above.  Then I started the installation, pre-installation check shows 'File System' failed with the error message: there is no such thing as oraInventory.  I continued, there was no error during installation but after installation controls reveal "JSP" and "Page"Login"failed with the following error message:

  JSP

  Check URL = http://localhost.localdomain:8000/OA_HTML/jtfTestCookie.jsp

  JSP is not an answer, wait 15 seconds and try again.

  JSP is not an answer, wait 15 seconds and try again.

  JSP is not an answer, wait 15 seconds and try again.

  JSP is not an answer, wait 15 seconds and try again.

  JSP is not an answer, wait 15 seconds and try again.

  JSP is not an answer, wait 15 seconds and try again.

  JSP is not an answer, wait 15 seconds and try again.

  JSP is not an answer, wait 15 seconds and try again.

  JSP does not

  and

  Login page

  Check URL = http://localhost.localdomain:8000/OA_HTML/AppsLogin

  RW-50016: error:-{0} not created:

  File = {1}

  Any suggestion to solve these problems?

  # Do not remove the next line, or various programs

  # requiring a network functionality will fail.

  # 127.0.0.1 localhost.localdomain localhost - only comments not this line

  It says very clearly do not remove these lines, and yet you have commented

  you might have used just any presented another host name "localhost".

  for example

  [ip_address]      [NodeName]. [domain_name]        [NodeName]

  192.168.1.65 vision.mylearn.com vision

  Please follow this note and see if that solves your problem

  R12 Rapidwiz fails on the message installation tasks: RW-50016, Timed Out (100000) (Doc ID 437152.1)

  Doen't work, take a look on

  Correct the method of changing the IP address in 11i & R12(Doc ID 751328.1)

  How to change the host name to E-Business Suite Release 12 on single node(Doc ID 1277556.1)

  If you ever feel to reinstall

  How to remove Oracle applications and clean up the environment of the BONE

• Oracle 11g R2 on Oracle Linux 7 loading problems

  It drives me crazy!  I use VMPlayer (6.0.4 build-2249910) to load the Oracle 7 and have no problems at all.  However, when I install Oracle 11 g R2, that's when I encounter problems (just loading software; not to create a database at the moment).  First of all, let me tell you, I'm not some process that I found on the internet several times.  There are slight differences in some of them, but essentially, I used the website below to install Oracle 11 g 2 on Oracle Linux 7:

  ORACLE-BASE - Oracle Database 11g Release 2 (11.2) Installation on Linux Oracle 7 (OL7)

  When running through the installation, I first encountered the ctx error:

  

  I could find anything on this subject, so I continued in this way.  To learn more about this later...

  The next error I get is:

  

  This second error was easy to be supported by the following:

  During the connection phase, you will encounter an error invoking the file 'ins_emagent.mk '. To resolve this problem, change the "$ORACLE_HOME/sysman/lib/ins_emagent.mk", do a search and replace the line below.

  FROM:
  $(MK_EMAGENT_NMECTL)
  TO  :
  $(MK_EMAGENT_NMECTL) -lnnz11
  

  Click 'Retry '.

  Now took care of the issue emagent.

  On the issue of CTX, I can't find anything on this at all!  I looked in the log file and found the following detail:

  INFO: mv /u01/app/oracle/product/11.2.0/bin/ctxlc /u01/app/oracle/product/11.2.0/bin/ctxlcO f

  INFO: mv ctxlc /u01/app/oracle/product/11.2.0/bin/ctxlc

  INFO: chmod 751 /u01/app/oracle/product/11.2.0/bin/ctxlc

  INFO: gcc o ctxhx-m64-L/u01/app/oracle/product/11.2.0/ctx/lib/-L/u01/app/oracle/product/11.2.0/lib/-L/u01/app/oracle/product/11.2.0/lib/stubs/ /u01/app/oracle/product/11.2.0/ctx/lib/ctxhx.o-L/u01/app/oracle/product/11.2.0/ctx/lib/ - lm-lsc_fa-lsc_ex-lsc_da-lsc_ca - lz - lctxhx-Wl,-rpath,/u01/app/oracle/product/11.2.0/ctx/lib-lsnls11-lnls11-lcore11-lsnls11-lnls11-lcore11-lsnls11-lnls11-lxml11-lcore11-lunls11-lsnls11-lnls11-lcore11-lnls11 ' cat / u01/app/oracle/product/11.2.0/lib/sysliblist

  INFO: '

  INFO: /lib64/libstdc++.so.5: refers to 'memcpy@GLIBC_2.14' the undefined

  collect2: error: ld returned 1 exit status

  NEWS: make: * [ctxhx] error 1

  INFO: End of the generated process exit.

  INFO: ----------------------------------

  INFO: Exception thrown from action: do

  Exception name: MakefileException

  Exception string: error in invoking target 'install' of makefile ' / u01/app/oracle/product/11.2.0/ctx/lib/ins_ctx.mk'. See ' / u01/app/oraInventory/logs/installActions2014-11-28_12-45-46PM.log' for details.

  The exception severity: 1

  It seems to be hung on the reference to "memcpy@GLIBC_2.14".  I found a few web references on this, but I don't think that they apply given that sites speak other Linux distributions.

  What bothers me the most about it is that I use everything which is Oracle (except VMPlayer), but I get errors that I don't think that should be the case because there is nothing else than the Oracle!

  Is there something I can add to the command 'gcc' or the make file that will get this work?

  BTW: I think that I will not use CTX with my DB, then will I get in trouble if I create a database with this error CTX?

  Thanks in advance!

  It drives me crazy!

  That's because GR 11, 2 is not certified or supported on Linux 7 (no matter what claim of third-party sites or blog-see the subheading of the blog). Only 12cR2 is http://docs.oracle.com/database/121/LADBN/toc.htm#LADBN101

  So, you can either 12cR2 (1) installation on Linux 7 by following the steps of the official installation guide or (2) downgrade your operating system Linux 5 or 6 of Linux to install 11 GR 2 (Linux 6 requires 11.2.0.3 or higher - http://docs.oracle.com/cd/E11882_01/relnotes.112/e23558/toc.htm#CHDFHIEA)

• Cannot install Oracle Linux 6 EMP 11.1.2.3.0 64-bit

  I tried to install 11.1.2.3.0 on Oracle Linux 6 64-bit PMC. I downloaded and unpacked rest of files in a directory and started installing. But during the installation I can't select the major components because most of them were grey. How could it happen? I don't know what don't get me.

  Is the command that I used to decompress the files

  unzip file_name.zip

  The system version EMP 11.1.2.3.0 for Linux x 86-64 part 1 V45342-01

  The system version EMP 11.1.2.3.0 for Linux 64 - x 86 part 2 V37974-01

  EPM System Release 11.1.2.3.0 part 3 V37933-01

  The system version EMP 11.1.2.3.0 for Linux 64 - x 86 part 4 V37975-01

  The system version EMP 11.1.2.3.0 for Linux 64 - x 86 part 5 V45343-01

  The system version EMP 11.1.2.3.0 for Linux 64 - x 86 part 6 V37977-01

  The system version EMP 11.1.2.3.0 for Linux 64 - x 86 part 7 V37978-01

  The system version EMP 11.1.2.3.0 for Linux x 86-64 Oracle HTTP Server V37979-01

  It is appreciated if anyone can help.

  Not always and that these elements should be included in the files listed by the OP, in many cases, it may be requiring the linux packages are not installed, for example.

  

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Installing Oracle on Oracle Linux 5.8

  Hello

  I looked on a lot of blogs to get a good document for the preparation and installation Oracle Linux 5.8 or greater and Oracle 11gR2.I am getting confused with all these documents.

  As this points to create mounting configurations to bring forms Linux point of view etc..,.

  Can someone provide me with a document or a guide, where I can install Oracle Linux and prepare the operating system for installing oracle 11 g 2 and go from there. It would be a great help.

  Thanks in advance

  Oracle database preinstallation tasks

  It has the instructions you are looking for.