2000-0142 Validation 71808 disc error

Similar Questions

• error 2000-0142

  So I'm the mother of bricks typical of the update of the bios dell (aprox 1.5 year ago) I just installed a motherboard renovated same stickers for CN-07JNHO info. Started machine and loading, I received the request of 'reboot & select proper boot device '. I rebooted w / f12 and got into the bios page. He had the hard drive to boot class 4th so I moved it to... recorded 1 restart the same thing. Double checked that my hard drive son have been linked to the 3rd test... same results. Did a check of the ePSA and got an error code 2000-0142 as hard drive 0... as it is the is not find? I'll post pictures to help and any help is appreciated!

  error code # 2000-0142 validation # 114880

  History *.

  Before pasting the couple paper weight thousand dollar in the closet... it would abandon the beep codes at the start and never from desktop... I made a few bios hardware reset with swaping clips on the pins / changed MB battery ect and he would sometimes launch and be playable until he cut power failure or an ect update and when starting it has always been the problem with the the bios loading. I got that last for a few months... until finally nothing helps it load the BIOS.

  Alienware Aurora R4

  service tag #.

  ADMIN NOTE: maintain the label removed by privacy policy >

  (awarded to nine MB)  (old MB #)

  ADMIN NOTE: maintain the label removed by privacy policy >

  )

  CPU i7 - 3930 K 3.20 GHz

  Windows 7 64 bit OP

  

  

  = 2000-0142 drive self test failed

  You will probably have to replace the hard drive...

• ERROR CODE 2000 - 0142 WHAT DO I DO WITH THIS CODE?

  I have a laptop DELL with Windows Vista loaded.

  It tries to load the desktop but keeps running without result green bar

  CHECKDSK is conducted without all the mistakes are found.

  DIAGNOSIS showed the color screen, then the error code 2000-0142

  which seems to be related to the hard drive.

  F2 function key works to change settings

  What should I try to run windows?

  Thank you

  Hello

  It is an error code Dell saying that your drive hard has failed and must be replaced.

  Read this information from the Dell Community.

  http://en.community.Dell.com/support-forums/laptop/f/3518/p/19451299/20115134.aspx#20115134

  http://en.community.Dell.com/support-forums/disk-drives/f/3534/p/19498610/20329964.aspx

  http://en.community.Dell.com/support-forums/laptop/f/3518/p/19485947/20274290.aspx

  For more information about error codes Dell, please ask in the Dell Community Forums.

  http://en.community.Dell.com/support-forums/default.aspx

  See you soon.

• error on black screen 2000-0142

  original title: black screen

  Window vista DELL screen black error code 2000-0142 portable hard drive 0 that I tried the updata virus leaves the next day then morning black screen

  Hi yolandasalgado,

  Try this link and see if that helps you...

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&CS=19&l=en&s=DHS&docid=DSN_126A722713F6D0D0E0401E0A55174AE6&isLegacy=true

  Concerning

  GT4U

• error code: 2000-0142

  System-dell inspiron 3542

  error 2000-0142...

  What should do?

  Help, please...

  Thank you...

  The hard drive has failed.

  If the system is under warranty, contact Dell with the exact error and they will replace the drive.

  If the system is no longer under warranty and you need help to choose a replacement drive and installing it, please post the complete model of the system number (i.e., N5110 Inspiron, XPS L501x, etc.).

• Error code: 2000-0142, HDD 0-Self Test UN Succesful status 79.

  Hello guys

  I ran a Diagnostic Test on my new laptop N5010, it failed the Test of hard drive and gave this message "error Code: 2000-0142, HDD 0-Self Test unsuccessful status 79.»

  Can someone help please...

  Regarads
  

  khanisar

  Error Code 2000 - 0142, indicates a failing hard drive / failed and you need to replace it, because it is new laptop for a replacement of the hard disk, contact the Dell Technical Support and provide the error message.

  Bev.

• Drive hard error Code 2000 - 0142

  Inspiron 15 (3531, mid-2014)

  I tried boot diagnostic that the result has failed with the error code 2000-142.

  I have used a quick diagnostic race through dell online support site - it shows critical errors found

  for hardware failure then suggested for a replacement.

  Targeted both reading test SMART short self-test is broken.

  We hope to hear from you on your recommendations of experts on hardware issues.

  [Admin NOTE: maintain the label removed in accordance with the TOU strategy]  [Admin NOTE: deleted in accordance with the Express service code TOU strategy]

  Ryan Ibarreta - [Admin Note: personal information]

  Philippines

  Error code 2000-0142 usually indicates a failing hard drive / failed, first of all, try to remove and reinstall the hard drive, then re-run the diagnostic tests and see if you receive the same error.

  If the same error is received, the hard drive has failed, then you need to replace it.

  If you have a warranty from Dell, contact Dell Technical Support for a replacement hard drive.

  Bev.

• Dell xps 8100; Disk failure hard error 2000-0142 0 self test status 79

  Hi guys, I was wandering in the forums for a few hours, now looking for ana response to this question, and can't find anything clear. I have a XPS 8100 that I run a diagnostic and received a 2000-0142 error code that says MSG: error code 2000-0142 hard drive FAILURE 0 self-test status: 79 based on what I read in the forum is that there is a disk failure, and the only recourse is to solve the problem in my view is to replace the drive. Firstly, can someone please give me an absolute confirmation that it is indeed what I have to do, or is there something else I should do to fix this problem first? If a replacement drive is there someone could please tell me how can I do to get my OEM software off the coast of the partition recovery and on my new drive. I now office preinstalled and, of course, premium Windows 7 I would like to see on my new hard drive and I was not provided with one of the disks at the time of purchase. Thanks in advance to all those who respond

  Hi XPS8100kid,

  Welcome to the Dell Community Forum.

  The 200-0142 error is for hard drive failure and you need to replace the hard drive.

  Since the hard drive has not, you would not be able to access the partition recovery on it. Data would be lost and the software already installed on your computer will need to be reinstalled.

  Windows 7 will need to be installed on the new hard drive. Please click the link below to get the procedure of re - install Windows 7.

  http://Dell.to/15MYHsz

  If based in the United States, you can ask for the backup drives by clicking the link below:

  http://Dell.to/Zj7oHA

  I would like to know if additional assistance is needed.

  Thank you and best regards,
  Babita S
  #iworkforDell

  For easy access to the drivers, manuals and updates, please visit our Support Site .

• Error code #2000-0142 after the laptop is a Dell fall.

  Original title: I have a Dell Inspiron 1545 with Windows 7 x 64 which does not load windows.

  No new software or configurations have been added since this problem started about 2 weeks ago.  However, the laptop fell.  I was able to run the system diagnostics by pressing F12 at startup.  All retired except for one hard drive tests (DST short Test), who has found the error #2000-0142.

  I know that some forums suggest that the error refers to a bad hard drive or corrupted.  But others have had some success in trying the installation CD/DVD.

  Basically, the computer crashes windows tries to load/startup and I get to the blue screen with a dove and the leaves of some green in the background and a mouse cursor that works.

  I tried several methods of recovery without success. Whenever I find myself on the same blue screen.  I inserted the DVD FAB with the Windows installation/recovery.  I tried installing but the computer froze in the process.  I'll try the repair option, but the computer is frozen on the System Recovery Options. The menu lists the hard drive, but the compputer seems to be stuck trying to figure the size of the partition with.  Is there a problem if I tried the method of installation first, before you try the repair option?

  You will need to replace the hard drive.

• Hard drive failure: error 2000-0142 since current default Scan PC.

  Original title: error 2000 - 0142

  Activities of PC by default Scan on my laptop DELL Inspiron 5520. Hard drive failure: 2000-0142 error what does that mean?

  REDA

  According to the answer by a representative of Dell here:

  http://en.community.Dell.com/support-forums/laptop/f/3518/p/19467468/20188938.aspx

  It seems that the error means what it says - the hard drive has gone bad and should be replaced.

  I highly recommend that you only backup your data to another drive immediately and then contact Dell for confirmation about the error and advice on the best course of action.

• Sony Handycam DCR-DVD305 Disc Error C:13:02

  I get disc error C:13:02 when you try to get the video on the disc. I can't get the drive to read in the computer, either. How can I see if there's some videos about it. It is a double-sided disc, one side work and not the other. It's very frustrating. Any suggestions?

  Hello
  Welcome to the Forums of Discussion of the user.

  Please refer to page 127 of the user manual and codes error of research by clicking on the following link:

  http://www.docs.Sony.com/release/DCRDVD105-205-305.PDF

  Try saving another disc using the camcorder and check if the camcorder works well. If you believe that there is a problem then contact the Sony Support by clicking here:

  http://eSupport.Sony.com/us/p/support-c... D305 & LOC = 3

• 'No disc' error on the Toshiba BDX1200KY blu - ray player

  (Sorry, there seems to be no jury of blu ray player)

  I bought this drive blu - ray 3 months ago and a week ago I had a 'No Disc' error when I tried to play a DVD. The machine plays all my DVDs without problems before if is not a concern for the region. Now, he will not play one of my DVDs and they are all clean and intact. However, she still plays my blu ray discs without any problem. I bought a blu ray disc lenses cleaning hoping that would solve the problem, but it didn't. So, I bought a DVD lens cleaning disc but being a DVD itself, she also returned an error of 'no disc '.

  The problem is that this is my second machine in about 6 months. Exactly the same thing happened with my previous Toshiba BDX1200KY and the electronic shop guys couldn't get out and gave me a replacement so it is very likely that the fault is mine.

  These machines have distinct popsicles for Blu Ray and DVD? Can someone suggest a solution. I smoke and I often stop the machine. It is pointles continuing until I have it worked.

  Unfortunately, it's a computer / laptop Forum options so I m afraid there is not a lot of people who can provide you with solutions

  However, I put t think that this player is equipped with different laser lens it s a goal that must manage all disks

  My player couldn't handle all the disks because the goal was dirty. I unmount the drive to access the lens and managed to clean it with a cotton tip and a little alcohol.
  So it helped in my case

• Windows xp update fails after reinstall OE discs error number: 0x8024400A

  Windows xp update fails after reinstall OE discs error number: 0x8024400A. Cannont even run Windows update at all.

  Hello
   
  To work on the issue, consult these links.
   

  Temporary connection related errors may occur when you use Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/836941
   
  Note: make sure that you enable the antivirus software, other security and firewall after the test programs.
   
  Caution:
  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  You can also designate a similar thread that addresses the question:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/how-can-i-get-Windows-Update-error-x8024400a/35ba7694-c9b2-4043-a4c0-777d4b7736dc

  Hope the information is useful.

• The new XP installation error. The signature for the family Windows XP Setup is not valid. The error code is fffffc0d

  I'm doing a fresh install of Windows XP Edition family on a new hard drive.  I get the same error message indicating that the product catalog can not be installed. I reformatted and retryed with the same result. I tried a different HARD disk, but got the same trouble. I also tried installing XP Pro after a reformat and got the same error. The first error window says "the signature for the family Windows XP Setup is not valid. The error code is fffffc0d", and the second says" error: the system cannot find message for message number 0xfffffc0d text in the file for syssetup.dll fatal error messages: Setup failed to install the product catalogs. " Any directive or ideas would be greatly appreciated. THX

  Hello

  I suggest you try the steps from the link below and check if it helps.

  http://support.Microsoft.com/kb/307153

  Hope this information is useful.

• I get a "not an application valid win 32 error" when I try to download and run a program

  Original title: win 32 error

  When I dounload one program and try to run it I get one is not a valid win32 application error. This happens on more than 1 program how to fix this?

  Hello

  ·         What program are you trying to install?

  ·         The program is compatible with Windows XP?

  ·         Since when are you facing this problem?

  ·         What web browser do you use to download a file?

  I suggest to delete temporary internet files from your computer, and then try to download the program, save it in a different location and try to install it from there.

   

  Get the error: not a valid 32-bit application can have several origins:

  I have listed some of them below.

  The file is corrupted, bad or missing.
  (a) if the hard drive is damaged or hurt it cause work programs to fail, either because not all data can be read from the hard drive the program is damaged on the drive. Run scandisk and defrag on the hard disk to check for potential errors.

  (b) If you are running the program from a shortcut on the computer, verify that the program is still on the computer. In some cases if the program is no longer installed on the computer, you can get this error.

  File is not designed for your version of Windows:

  
  (a) If you try to run a program that is not designed for your version of Windows, you can get this error.

  (b) Although many old programs designed to work in older versions of Windows will work with new versions of Windows, unfortunately, not all programs will not work.

  (c) if the program is an MS-DOS program more former start program or Windows, you can get this error.

  (d) if the program is designed for a 64-bit version of Windows and you are running in a 32-bit version of Windows, it will not work and generate this error.

  File is a virus, worm or other malicious program file.

  
  (a) this error can be generated by a file that is a virus, worm, Trojan horse or other type of malware file. Often, this will result because the antivirus installed on the computer will not allow the file to install or run. Try to analyze the file to check, it is not a virus or infected.

  (b) if the file has been checked and is clean, it is always possible that the virus protection program or a another program installed on the computer is at the origin of questions during installation or execution of the program. Start the computer in Mode safe and try to run the program. start the computer in Mode safe will be that nothing is running in the background that could cause this problem.
  
  Hardware incompatibility.

  one) If you get this error during the installation of a program, it is also possible that the CD-ROM drive or the drive that you are installing the program from is not compatible with Windows or drivers that are not compatible with Windows.

  (b) download the latest drivers for your CD player or other of the manufacturer of the computer or the manufacturer of the equipment. (Microsoft does not pilot for other materials)

  Follow these steps and check if that helps:

  Step 1:

  I suggest you to download and run the latest Microsoft security on your computer Scanner and check if it helps:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

   

  Step 2:

  I suggest you follow the troubleshooting steps form the article and check if it helps.

   

  Problems installing and uninstalling programs on Windows computers

  http://support.Microsoft.com/kb/2438651