2000-2202TU HP: HDMI connect not not TV - laptop (HP 2000-2202TU) - Window 7 Ultimate

Hello

I am facing problem while connecting hp laptop HP 2000 - 2202TU hdmi to the TV. It gives no error, but no signal is displayed. Given graph Standard VGA Graphics Adapter of card.

Help, please!

Thank you

Hello:

Your laptop is not supported by HP for 32-bit operating systems.

You must install the graphics driver applicable to this problem.

See if one directly from Intel works for you... the first listed file is the auto install file.

https://Downloadcenter.Intel.com/download/24695/Intel-HD-graphics-driver-for-Windows-7-8-8-1-32bit

Tags: Notebooks

Similar Questions

  • HP Deskjet 5150 will not my laptop HP4520s print using Windows 7 Pro

    printer is connected directly to the laptop but will not be installed. Need a driver to work with Windows 7; want this printer available to other computers on our home network. Gary TX

    How to add a printer in Windows 7...

    http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

    When you get to the part where you have the possibility to search on Windows update, take it.

    The 5150 will install and it did for me since 2003.

    If your computers are running all Vista or Windows 7 or 8, set up a group home on the computer that hosts the printer, preferably one that will always be connected and look for a network printer on all of them except the host that should already work.

  • STOR.e TV +: HDMI connection not workingTV +.

    Hello

    I bought your TV Stor.e + Media Center and I can't get the HDMI to work with my HD TV. The standard output AV works fine, but when I try the HDMI, the screen just flashes for a second and then remains empty. I went through all the settings on the device media and TV, nothing helps.

    The TV is a LE23R71B of Samsung HD. Is it possible that there is a compatibility issue with this TV?

    Kind regards
    Andrew

    Hello

    FYI you:

    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=63447&start=15&TSTART=0

    good luck.

  • Brand new OfficeJet 7000 drivers will not install for the brand new Windows 7 Ultimate 64 bit PC

    Hello

    I downloaded the versions Basic, both full of drivers for printer OfficeJet 7000.  Move cleanly - error code 2203.  When talking about this issue with the Support technical they tried several different things, but nothing has worked.  I have a service ticket number - 80356333671

    After turning off the phone (more than 90 minutes) - I searched on google and all the hits that were displayed were the same steps I saw technician employment, made you ask - is google, the new standard Tech support?

    Currently, I own a nice weight and pretty paper.  Anyone can help - I'd appreciate it.

    With the help of technical support, I ran the "Officejet software and driver Removal Utility" for my particular model (available on HP website - driver download page) and then ran the installation of the driver and it worked perfectly.  Why? I do not know.

  • Corel Painter Essentials 4 will not open on my 64-bit Windows 7 Ultimate PC, even after trying all the previous versions of MS install modes. Any ideas?

    Don't know what else to add at this stage.   Does anyone know of a workaround or a fix?

    Hello, Lance Colvin.

    According to the Windows 7 Compatibility Center, Corel Painter Essentials 4 is compatible with 32-bit and 64-bit computers.
    http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/details.aspx?type=software&p=painter&v=Corel&UID=4&l=en&pf=0&PI=0&s=Corel%27s%20Painter%20Essentials%204&OS=64-bit

    Do not have Adobe® Acrobat® Reader installed >

    I suggest you post in the discussion of Corel Corel painters Essentials 4 group.
    http://Essentialscafe.com/forums/49.aspx

    They would be more apt to help with their software.

    Sincerely,.

    Marilyn

  • I change the window of my laptop HP 635 to Windows 7 ultimate and can not find drivers drivers

    I change the window of my laptop HP 635 for window 7 ultimate and impossible to find some drivers. The drivers are listed below with their hardware ID

    Ethernet Controller
    PCI\VEN_10EC & DEV_8136 & SUBSYS_3577103C & REV_05
    PCI\VEN_10EC & DEV_8136 & SUBSYS_3577103C
    PCI\VEN_10EC & DEV_8136 & CC_020000
    PCI\VEN_10EC & DEV_8136 & CC_0200
    Network controller
    PCI\VEN_168C & DEV_002B & SUBSYS_1461103C & REV_01
    PCI\VEN_168C & DEV_002B & SUBSYS_1461103C
    PCI\VEN_168C & DEV_002B & CC_028000
    PCI\VEN_168C & DEV_002B & CC_0280
    PCI device
    PCI\VEN_10EC & DEV_5209 & SUBSYS_3577103C & REV_01
    PCI\VEN_10EC & DEV_5209 & SUBSYS_3577103C
    PCI\VEN_10EC & DEV_5209 & CC_FF0000
    PCI\VEN_10EC & DEV_5209 & CC_FF00

    Hello:

    You will need:

    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5086719&prodNameId=5086720&swEnvOID=4061&swLang=13&mode=2&taskId=135&swItem=ob-93650-1

    This:

    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5086719&prodNameId=5086720&swEnvOID=4061&swLang=13&taskId=135&swItem=ob-108903-1&mode=3

    And this:

    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5086719&prodNameId=5086720&swEnvOID=4061&swLang=13&mode=2&taskId=135&swItem=ob-93202-1

    Paul

  • my administrator password does not work after the upgrade to Windows 7 Ultimate and can not get as administrator__

    Failed to get on as an administrator on new Wwindows & Ultimate

    Upgrade to Win7 has nothing to do with the Windows Update feature. Please repost your question here: http://social.answers.microsoft.com/Forums/en-US/w7install/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • My function keys do not work when I upgraded to Windows 7 Ultimate edition of Windows 7 Starter.

    When I upgraded my OS to Windows 7 Ultimate from Windows 7 Starter small icons that appeared when using the function keys have disappeared and the key function that my wireless switch and stop no longer works. I searched online, but can't find anything.

    you need acer launch Manager (I think that its made by dritek) this program controls the function keys on the keyboard. If you have done your disk driver and utilities, it should be there

  • Windows 7 Ultimate Service Pack 1 (64-bit) will not download completely stuck at 95%

    I tried to install Service Pack 1 of Windows today on my laptop.  On one of my laptops with Windows 7 Home Premium 32 bit operating system Windows Update downloaded (with 4 other updates) in about an hour and installed successfully during the shut down and restart.

    However on my laptop main used with Windows 7 Ultimate 64-bit Service Pack 1 stops downloading (although he says he always download or seems to be) to 95%.  The first time that I tried to download with 3 other updates to Windows, and it stuck.  I finally stopped after about 7 hours with it stuck at 95%.  Isolated, the other downloads and downloaded and installed after the reboot and did it in less than 15 minutes.  Then began to try to download only the Service Pack 1.  It has now been underway for six hours and is still stuck on download of 95%.

    Another forum on the web had a message that the Service Pack 1 with Windows 7 Ultimate 64 bit will not download if you have installed language packs.  (Those who took me about 3-4 days to install and download due to make them one at a time because as a group they would get hung up.)  So I hope that I did not remove the language packs to get this Service Pack 1 installed on this machine.  I hope that Microsoft would have tested on a computer in Windows 7 Ultimate 64 bit with language packs installed but maybe not...


    I HAVE THE SAME PROBLEM. I GAVE TO MY VISTA NOW, I HAVE JUST AS MUCH TROUBLE I DID BEFORE.  ABSOLUTELY, NO DOWNLOAD FROM ANYWHERE.  I WOULD BE HAPPY TO RETURN TO XP.  DEE

    I feel for you Dolores it was extremely painful and tedious experience.  The final fix for my computer was going back to the origin by default with Windows Vista Home Premium on my computer.  Then load the software Windows 7 Ultimate.  Then the installation of updates about 100 + Windows which took place including Windows 7 SP 1.  All this has been done before loading another software (except Firefox and Chrome) on my computer.  I did it too before my security software loading, which – incidentally, roughly double the speed of downloads and other features of the computer.  Then after all the updates for Windows 7 has been done, I loaded with Microsoft Office Applications and its many updates.  After that I loaded my security software and checked for viruses.  Then rebuilt all the other features, software customization, etc. of this computer.  Literally, it took over a month to return to the same functionality that it had before the Windows 7 SP1 crashed the computer.  All I can say is thank God that I am religious about backing up files and folders, so I think I got about 95% of my files, folders, etc.

    Since the reconstruction, I didn't "major" problems with Windows 7, but I cringe when I update Windows 7 via their process of updating every Tuesday.  I also try to update not updates at the same time or too large sizes in the updates, even if it takes more time to do it this way.  I also reboot after each update whether necessary or not.  I run two registry cleaners different at least once a week, or even more often as since the failure of catostrophic SP 1 of the operating system.

    I will say this though, a lot of programs/software, I had that wouldn't work with Vista, all of a sudden work again with Windows 7.

    Good luck!

  • (For Microsoft employees) Apologies for not genuine Windows 7 Ultimate

    I have a laptop with Windows 7 Home Basic pre installed, it was authentic 100%. At that time I was 12, I don't know what Windows Anytime Upgrade (I don't know about the authentic software, pirate, crack, serial, k product key, etc because I was 12). I entered, and there was a lot of function of the new Windows 7 (Home Premium, professional, ultimate). I tried the product key for Windows 7 Ultimate upgrade (just try, you know about the time that was my first laptop...), I found it on a website, not a keygen, crack or hack, it is only the serial number. I try to enter the upgrade key Windows 7 Ultimate for Windows Anytime Upgrade. First of all, the upgrade to Windows 7 Ultimate cancelled because the series was not valid. So, I canceled it.

    Suddenly, when I restart my pc, it is automatically upgraded to Windows 7 Ultimate! It's weird! I waited and my PC has become Windows 7 Ultimate... I used the Windows Update, and it is perfectly works like a charm! I did not know why the non-genuine Windows 7 Ultimate could not detected as not authentic, I used it for almost 2 years as a truly authentic Windows, no window pop up, no warning non-genuine, it's like the real genuine Windows.

    When I was 15, I recently know that no authentic (cracked, steal the serial number) is an action contrary to the law, 'hurt' Microsoft Corporation and the true owner series I entered... I feel guilty...

    "I apologize (very apology) for Microsoft Corporation and all employees of Microsoft, especially under Windows, because I use non-genuine Windows 7 Ultimate edition (upgrade of Windows 7 Edition family Basic)." I don't know anything at this moment here because I was still 12. »

    Now, I have to my WIndows 7 Home Basic with the product under the laptop key... But, the problem is, I get the Windows 7 Home Basic, Windows 7 Ultimate edition not authentic, I downloaded it on the third party site, it's 100% clean official Installer for Windows (not cracked, hacked, or more). I created the bootable USB and installed on the laptop.

    My question... Is my Windows 7 Home Basic (now has been updated 10 Windows entitled Digital Home) become non-genuine (in religion: illegal, prohibited, illegal) because I have no money to buy the actual key Windows 7 Ultimate upgrade... I'm really very sorry...

    Please accept my apologies to Microsoft Corporation and need your advice for me...

    Thank you

    Because you have restored the authentic Windows 7 Home Edition basic and upgraded to Windows 10 Home, you are now in compliance. Nothing to worry.

    Click Start > settings > update & security > Activation

    If it says that Windows is activated, then fine.

  • Windows 7 Ultimate will save not receive the error code 0 x 80070002

    Original title: Windows 7 Ultimate will not backup

    I'm running Windows 7 Ultimate and the backup utility does more. I get a message that it does not back up - error code 0 x 80070002. What can solve this problem?

    Thank you very much.

    Hello NoFunBob,

    When you try to back up your data too? (external drive, dvd, IE..)  When your last successful backup has been completed?  Please let us know status.

    Thank you

  • Unable to connect to internet on laptop using the router wireless netgear WGR614 v9 and windows 7

    My office that I use as my host computer running Windows XP. I have a wireless network works on another laptop also on Windows XP, but cannot get a connection on the second laptop that is running Windows 7. Just bought from a friend. I appreciate any help you can give. The laptop has a Wi Fi sticker on it, so I guess he has the ability to connect. When I try to connect, it will ask me a security key. I put the safety key in and it said possible key is not. Don't know what else to do. If I run an ethernet cable from the modem and connect it to the laptop, it will allow me to connect to the internet.

    Thank you

    precionist

    Hello

    Look in the Wireless Manager and delete everything that is there.

    http://www.ezlan.NET/Vista/wireless_manager.jpg   (Control Panel, network and sharing Center. Upper-left click Manage wireless networks.

    After cleaning, connect from taskbar tray wireless icon.

    Given that your wireless network is more in the preferred list, it will prompt for the password. Put the password that is current, and if all goes well it will connect.

    If the password does not work the newspaper to the router with a cable and restore the password.

    Jack-MVP Windows Networking. WWW.EZLAN.NET

  • TV does not recognize the HDMI connection

    I put Windows XP on my PC instead of Windows 7. I installed so I thought that all the correct drivers but my TV does not recognize a connection when you use an HDMI cable to watch movies via my laptop. I want to be able to drag the window on the tv screen to watch a movie and still use my phone for other things.

    Please help me.

    Hey Buddy,

    Here in the forum there are already a lot of discussion about the HDMI connection. I would recommend checkthing these discussions that might be useful:

    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=236993𹷁
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=232961𸸁
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=234457𹏙
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=230999𸙗

  • Satellite program-112 P775: HDMI connection to the TV does not work

    Hello

    For some reason that the HDMI connection between my Toshiba Satellite P775 program-112 to LG TV no longer although he did for some time.

    I tried another laptop without problem.

    I posted the same question some time ago and told to press the Fn and F5 keys, but it did not work.

    Any suggestions please?

    You are right: the FN + F5 switches between the internal and external video output.

    What exactly happens when you press FN + F5? A map falsh menu appears on the screen when you use this key combination?

    On the page of the Toshiba UE driver you can find the Manager command HDMI. This driver is required for your HDMI controller.
    In the case where the output to HDMI does not work, try reinstalling the driver

  • Atrix HDMI to laptop computer Vaio HDMI connection does not

    I adapted my Atrix on the multimedia dock, connected power and then connected to the mm HDMI cable anchor on my laptop Vaio HDMI, I have read and understood the firefox browser should be launched directly, but did not, I missed something?

    By the way, I have the kit multimedia motorola set.

    Advise me please.

    Thank you

    There are few things mingle here:

    1. the webtop is initiated when the Atrix is connected to the HD multimedia dock and the dock is connected to the TV via HD.

    2. the webtop includes the full version of Firefox running a customized version of Ubuntu

    3. connect multimedia dock via HDMI to laptop will not work because this HDMI connection on the laptop, the output not in. Also, why put phone firefox on laptop? Just open firefox on the laptop.

    4. connection from computer to phone via USB will launch all apps on the phone. Which allows to "Motorola Phone Portal" (when USB connected) will cause the computer's browser to open and gives you access to some data of the phone - Contacts, SMS, photos and let you handle these things via the computer.

    5 Motorola has another application - Motorola Media Link; You can download and use to manage music and movies.

    6. If you want to use the webtop application when it is connected to a TV, you can, but it takes the phone to have turned on WiFi or an approved carrier data plan - if you want to use internet applications.

Maybe you are looking for

  • can't say my wireless HP 430 G1 adapter type

    I have a new laptop, but I can't find the type of the adapter wireless for the right driver.

  • What happened to the chapters in ATV4?

    I used to be able to jump between chapters on ATV3 by now that the function went on the ATV4. If I slide up (where I see chapters for purchased videos) - chapters for my videos torn do not exist. Y at - it a fix/work-around? Thank you!

  • Microsoft Wireless Mouse 700 v2.0

    My wireless mouse was double clicking when I do a left click.  I changed the batteries and adjust the settings of the mouse to no effect.  Is there anything else I can do to fix this problem.

  • calculator not canned not numbers to

    division attempt by another number 265.  each digit has been replaced by the next then changed from 2 to 6-5.  The only number on the screen is 5. How can this be corrected?

  • EOP print server

    I installed the print server role EOP on a Windows 2012 R2 Print Server. When I try to add printers EOP in vWorkspace management console, I get to the point where you add the EOP printer and select it network printer is displayed with just the Micros