Satellite program-112 P775: HDMI connection to the TV does not work

Similar Questions

• Satellite program-112 P775 - HDMI connection - no indicator signal on TV

  Hello

  I have a program-112 P775. After working for a while now, when I connect the HDMI cable to my TV SMART there is not an indicator of signal on the TV.

  I tried another laptop which works fine so I am confident, that he is not the lead or the TV.
  Any suggestions please?

  > It just seems odd that I've never had to use the FN key combination to send the video signal to the TV before.

  The FN + F5 combination switches between the internal and external screen.
  In the case where the video signal has not been set to an external source, now don't would detect not the laptop.
  This is also mentioned in user manual recommends checking page 54 :)

• Satellite W30T-A378 from - touch pad and the keyboard does not work

  I have a problem with my laptop, the touch pad and the keyboard does not work.
  Can someone help me what is the possible cause?

  Thanks in advance.

  Hello

  I guess you checked if the Tablet has been properly connected to the docking keyboard.

  Have you tried to unplug and plug the docking again?
  Note: there is a latch on the left you have to move and in order to remove the tablet.

  Perhaps there is a connection problem.

• My works wireless, but my connection to the LAN does not work?

  I have a Toshiba L305-S5917 laptop and my connection to the LAN does not at all, when I plug my CAT 5 cable into the slot not strikes is the lights. IM able to use my wireless works fine. All this happened when my laptop crashed due to a virus. I reloaded all windows from XP to Windows 7 and also bought Numbus disk driver and recovery for my model laptop and still no connection to the LAN... pls help.

  Hello

  Sorry I'm not quite clear about the situation.

  You posted on the Vista Forum; you have loaded Win XP and you running Windows 7?

  If the computer is currently running on Windows 7, newspaper to the support site for Toshiba laptop, download Windows 7 drivers for the wireless network card and install them.

  In general.

  Check the Device Manager for the entry of valid card of the wire.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  ----------------------------------

  Try installing the latest drivers from the card manufacturer support page.

  Download the drivers and extract them to a folder of your choice.

  In Device Manager, right-click on the adapter.

  Click Update drivers and choose her browse my computer for drivers.

  Choose let me a list of choices, click on disk and point to the folder with the drivers.
  -------------------------------------

  Check network connections to make sure that you have a Local Area Connection icon/entry, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Connect you to the menu of the router from a work computer and make sure DHCP is on, and it is configured to assign IPs which can cover the number of computers that are connected (a bit more will be even better).

  Turn off the computer and the router, reset the router and the computer.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  On the State of intellectual property.

  TCP/IP and its variables usually look like this.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  Typical TCP/IP status looks like this.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.
  
  Physical address is the MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.
  
  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2 There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ------------------------

  Also, make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted

  Please note that some 3rd party software firewall continue to block aspects of the Local traffic even it they are off (off) . If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• External monitor connected to the Dynadock does not work

  I just bought a docking station universal toshiba dynadock via amazon.com (latest version). I plugged on an Acer Aspire 5738zg computer laptop, Windows 7, 64 bit.
  Everything works great - except for my external monitor (6 months old packard bell viseo 190w, 18.5 inches, max resolution 1366 x 768 at 60 Hz)

  The dynadock manual says connect with monitor dynadock station via a vga cable - what I've done. Job monitor is completely black. The manual says then click the icon in the field of system status / tray (do not know what the word - the small icons at the bottom of the screen on the right screenfor side which) to configure the dynadock to be extended or mirror mode.

  Problem is that the icon does not exist. I have the icon for the audio part of the dynadock and icon for the system whole dynadock (icon called "toshiba dynadock tool" - here I can release the docking for example, but do not do anything on video/screen).

  I checked and the video/screen the dynadock element was installed togheter with everything - the installation was complete and successful. Still no icon if...
  I'm not watching videos or games, just be able to use my external when monitor I surfing online and you use microsoft word etc. - no data transfer gigantic so far as I can tell.

  How to solve this? Via the control panel of my laptop? How...? :-)

  I'd appreciate some advice that I am completely lost as to how to solve this problem (tips preference in the form of a very easy step by step 'manual' as I'm absolutely not an expert in computer science, just a regular user).

  Hi nanna.

  I think that the best way to solve this problem is to download and install the latest graphics driver for the dynadock.
  So please, use this link, download and install the driver.
  http://www.DisplayLink.com/support/downloads.php

  If the external display doesn´t not working after installing the driver, please do a right mouse click on desktop and verify the "screen resolution".
  You should see 2 screens.
  If this is not the case - there is an error during the installation of the utility dynadock.

  In this case, please visit the toshiba page
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp and download the latest dynadock utility.

  Please chosse: Options - connectivity - Docks & replicators - Dynadock

  You will find the version 2.4.0.13

  hope this will help you!

  Best regards

• Satellite L305D-S5895 - keys to functions and the wifi does not work with Win XP

  Hello

  first sorry for my English

  I bought a Toshiba Satellite l305d s5895, with Windows XP, I need a software, but the function keys does not work.
  So I need a driver, but I can't, and wireless internet does not work.

  > Where could it find special XP BIOS?
  In my opinion, there is problem because most threads here are on the European laptop models. then come to question United States. Toshiba Europe and Toshiba U.S. do not work together and each of them is responsible for own models and provide support for specific country notebooks models.

  For most models, so here in Europe Toshiba has offered two BIOS. We were already on the delivered Vista laptops. The Toshiba page download available BIOS for Windows XP Home edition. in most cases, it was version 5. XX and this BIOS was designed to support public services and specific tools of Toshiba. For example, all the FN key features was only available with this BIOS WXP.

  So if any of you have laptop model US they would see how the solution with Toshiba U.S. or US forum under http://community.compuserve.com/n/pfx/forum.aspx?webtag=ws-laptop&redirCnt=1

  Bye and good luck!

• Satellite A60-202 after bad BIOS updated the PC does not work

  Hello

  After a very bad my BIOS update, my PC doesn't work and doesn't turn on.
  What to do now?
  It is Toshiba Satellite A60-202 with 512 MB of memory and 40 GB of HD.
  model PSA60E-OLP06TFR SA60-202

  Thank you

  Yves

  HI Yves,

  Unfortunately, if the BIOS update procedure does not work (or fill), then it is likely that the BIOS in the CMOS chip had been corrupt and without it, you will not be able to boot your laptop to fix the problem.

  It will be necessary to bring (or send) your laptop to a repairer authorized to have reflashed BIOS.

  Kind regards

• Satellite Pro P300-276: switch WLan on the front does not work

  Hello.

  I have a problem with my laptop and would like to receive help or ideas. The switch to forward wireless network adapter does not work.

  It works when I push it to the right and keep pushing it. Then light work, he finds the network, and the convenience store told me that everything is working well. When I let go, the light turns off, it can't find the network and the convenience store tells me that I have to put on the wireless network adapter.

  I suspect that it is a physical problem and I need to get the machine repaired. But if someone has a quick easy solution or a recommendation, then I would like.

  I'm online now using an ethernet cable (via a powerline adapter, which I tend to use anyway). Furthermore, the laptop is great and I love the big screen.

  Thanks in advance,

  Matthew

  Yes, in my opinion, his mechanical problem in something wrong with the switch may be a loser contact

  I think that the one and only one solution: laptop must be disassembled and the switch needs to be replaced

  But it is not easy and to be honest I advise to use a dongle USB external WiFi instead of paying lots of money to get this replaced change.

• LAN connected to the internet does not work

  UH well obtained a windows to this day don't know that we do not know how to find the Witch one... it reboot and internet will not work... and lan is pluged in the network local works on my ps3 all internet im lost

  Should tell you on the post screen. Could be F1, F2 or the del key... His place at 3311 now. You can try to update. Other than that, the only reason LAN works, sound off in the BIOS, or its dead

• Satellite X 200-219 - the touchpad does not work as it should

  Hi all

  I recently bought a 2nd hand Toshiba Satellite x 200-219. Had some problems with it that I have overcome now, except one... The touchpad does not work as it should. I think that the cable has been damaged at some point.

  So I'm wondering if I should use the same ribbon cable to connect the keyboard to the motherboard or can I get one of a different model of PC Toshiba laptop?

  I tried searching on the net for advice but have resulted in nothing so thought I would try the forums.

  Any help you can give will be greatly appreciated.

  Thanks in advance,

  Lee

  I think you can use the items to the satellite X 205 series since this seems to be the same series as X 200:
  Found some related parts the touchpad:
  Satellite X 205 / X 200 touchpad Board with cable: reference number: K000047950
  Satellite part number for the TOUCH PAD FFC X 205 / X 200: K000047980

  But why you n t come into contact with a Toshiba authorized service provider in your country and order the part necessary and compatible?

• Satellite L300 - 1-5 - the screen does not work

  Recently, I encountered a problem with my laptop, the screen does not work.
  I tested my inverter of the screen and my backlight lamp to see that if that was the problem, but they both worked perfectly, I then tried the entire screen with the parts and that worked too. (I tried in my friends Toshiba Satellite L300 - 217)

  Then I looked around online and got told to try to connect my laptop to an external monitor, so I did and the screen didn't work there either. So now I'm stuck, I have tried everything even made sure all connections aren't loose etc but it still does not.

  Anyone know what the problem with my laptop?

  Thank you, Tom

  Hey Buddy,

  > connect my laptop to an external monitor, so I did and the screen didn't work there either.
  This means that the internal monitor is ok and the reason must be the graphics card or card mother herself.

  I guess for now, you get only a screen empty and nothing happens on your laptop?

  In this case, you should contact the closest service provider authorized in your country. Just get in touch with the guys and ask for help. They can check the cell phone and fix it! ;)

• Satellite Pro 4200 overheating because the fan does not work

  I have a satellite Pro 4200 and it keeps overheating because the fan does not work I went in and everything seems ok but then I power it upward but the fan does not work someone can help? all cables are connected the fan run at all.

  Hello

  And how to help her in this situation? If you are sure that it cooling fan doesn t work 100% needs to be replaced.
  By the way: did you clean the unit and remove the dust?

• Hello, I have creative cloud (programms photoshop, bridge, and lightroom on a HP Pavilion pc and UN laptop.) The laptop does not work more (broken) and I ' would like to install all programs on another laptop. How can I uninstall the programs of the

  Hello, I have creative cloud (programms photoshop, bridge, and lightroom on a HP Pavilion pc and UN laptop.) The laptop does not work more (broken) and I ' would like to install all programs on another laptop. How do I uninstall the programs of the broken laptop and not running before installing on a new? Sincere friendships Fabian

  Hello

  If you have access to the machine, turn off Adobe CC applications by the signature of the application.

  Please see connect and disconnect to activate Cloud Creative applications

  Kind regards

  Sheena

• Satellite C660 - click of the mouse does not work

  Hello

  I bought this laptop 5 weeks ago and now have problems with the right, click on the mouse does not work. Left click sometimes opens to the left, click on functions and leaves me is impossible to close programs or closed, double clicking in the pavement or enter does not work also.

  I tried to do a system restore to the factory, but I can not click on the next to take me through the restoration and end up having to close it via the main power switch.

  Any ideas please?

  Hello

  You have the same problems with a mouse external or just the touchpad?

  If an external mouse works correctly, you can use it to do a recovery install. This can help you to solve the problem, if this just s software.

  Not least have last but you tried to update the driver for the touchpad? You can find it on the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Check this box!

• The mouse does not work on my new Satellite L750/L755

  Hello world

  I bought a toshiba Satellite L750/L755 but the mouse does not work, I have no control on it that if I use an external mouse, while I have put pressure on the touchpad.
  I tried the following options:
  I updated the driver - I changed the operating system

  but nothing, still the same problem. Next laptop will be a Mac for sure.

  I look forward to hear from you

  Daniele

  Hello Daniele

  It's really strange that the touchpad does not work even if you have installed the right driver and installed the operating system again. At the first moment, we can say there is probably a hardware problem, but please be sure touchpad is listed in the Device Manager and also active correctly (FN keys).

  Check it please all the properties of the mouse.