2012 R2 in Windows domain controller goes to three options when you restart in hyper-v, but cannot boot from any option

Similar Questions

• Questions, communicate with a Windows domain controller

  I thought at first my user had a problem with Keychain and had finally called Apple Tech Support.  While on the line with Apple, we proved that it was not a question of Keychain, but rather a problem of communication with a windows domain controller. The key elements are:

  * Multiple users and Macs are members of an Active Directory multi-domain forest

  * iMac is a 27-inch, mid-2011w / 8 GB RAM

  * OS X 10.11.2 (updated 10.11.3)

  * Question appears isolated to this iMac (currently). All other iMac, Macbook Pro and Mac Pro is currently very well, several VIRTUAL LANs, and a MacBook connected to the connection of network iMacs can communicate properly with the domain.

  * iMac seems not to contact no matter what domain controller when connecting, but connects to the resources of the network and domain controllers, after login. Permissions and access to the resources appear normal after login.

  * User (s) cannot change passwords for mobile accounts or login with new mobile accounts, but accounts/passwords cached work very well.

  * iMac uses Symantec EndPoint Protection for Mac (anti-virus) – REQUIRED BY THE POLICY.  I can't change.  I have come off for the test, but must replace as soon as the test is completed. This policy is set at a level about five grades of remuneration above me.

  * It isn't really everything off the coast of the wall software installs on the computer.  The full Adobe Creative Cloud subscription is responsible, but so it is on just about every other mac I support.

  The steps that have taken place:

  (1) about a month ago, the user went to change his password, but wouldn't go to change password at the login window.  We were able to change their password on the network and could use the new password to connect to the network Active Directory controlled resources. We can connect to resources network successfully with the new password, after we connect locally with the old password.

  (2) we get the red ball (the network resources are not available) to the login window. We are basically connecting with identification and passwords cached information.

  (3) if we try to change their password through the system preferences / users and groups / / password Chang, we get the message that no domain controller is available.

  (4) initially thought that it was a matter of trousseau, and we ended up calling Apple support, since Keychain first aid is no longer available in 10.11. Apple-Advisor while that remote, showed where it was not a question of Keychain because we could not change the password on the domain, because the iMac didn't communicate with a domain controller.

  (5) while on the phone with Apple, we reset SMC and NVRAM without success.

  (6) If you are going to untie the iMac in the domain, a message that the system cannot communicate with a domain controller.

  (7) today, thinking that maybe there was a hardware problem with the ethernet connection, tried to use the private WiFi network. Still would not communicate with a controller domain, but, as if using the wired, could connect to network resources. This happens independently attempted account.

  (8) used a MacBook on its network without any problem, it is not the connection port or switch

  (9) moved his iMac to another connection on one VLAN different. Same question.

  I'm open to suggestions. I have two days to work on this subject, around the planning of production of the user, while I'm off site for a week.

  10) thinking that maybe it was something that happened with 10.11.2, he improved to 10.11.3 today. No change.

  I don't want to try to clean and recharge its iMac, in the hope that this clears up the issue.

  ANY SUGGESTIONS?

  A few additional tests.

  (1) Symantec deleted using Symantec CleanWipe, without modification. Has been reinstalled after additional tests and a reinstallation of the operating system.

  (2) being ran reports, visualization and research now, but nothing is really coming out as noticeable. Only problem seems to be a helper of Adobe

  (3) use a bootable USB key and had no problem with the thumb drive version, this isn't somehow a hardware problem.

  4) entered the recovery partition and the re-installed El Capitan, in the hope that perhaps, is a pilot or something in the protocol stacks have been corrupt, a reinstall would correct. Reinstall has not corrected the problem.

  I'm really strongly leaning towards here is something in a plist or somewhere configuration file that is corrupted, but I don't know where this would be right now.  Will continue research and testing. Last resort will be a wipe up to bare metal and a clean install. I will not migrate the profile of the user, but only its working files.

• Message window "Not connected to the internet" appears when you have MS and downloads updates.

  Whenever I try to use Windows Update or download MSE I tells me that my computer is not connected to the internet.  My web browser works fine, only when updating or loading of a product of MS IE. Silverlight, LifeCam, MSE...

  I have not done the clean boot - no good

  I tried to add tusted sites - not good

  I disabled and deleted some security I could find - no good

  This is a brand new machine - Dell Studio XPS with Windows 7 installed.  No Malware or Spyware that I see.  Help, please.

  Q: you have no anti-virus application installed now?
  A: No.

  You see the effects of a hijackware infection. See...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Win7: see "using the custom installation option" and formatting the hard drive section of http://windows.microsoft.com/en-us/windows7/Installing-and-reinstalling-Windows-7

  NOTE: If your computer came with a set of disks, there is a hidden partition restore (not to be confused with the restoration of the system) you would use to do the clean install (AKA a "destructive recovery").

  After the new installation, you will have the equivalent of a "new computer" in order to take care of EVERYTHING on the next page before connecting the machine to the internet or one local network (i.e. other computers) AND BEFORE to plug in a flash, SD card, or any other external drive to the computer otherwise:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  IMPORTANT! -Online any Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the removal tool appropriate before installing updates or IE upgrades AND BEFORE installing your new anti-virus application.

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Risks & benefits of P2P file sharing
  http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
  http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx
  http://www.us-cert.gov/CAs/tips/ST05-007.html

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If you need additional assistance with the clean install, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/w7repair/threads

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  Good luck!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows media player error "Windows Media Player has encountered a problem when you try to read the file" after burning CDs.

  Original title: "missing songs" in my windows media player then burn them on several cd :((

  I burned songs to several cd using my Windows media player to make different Cd, but after I returned to my library all the songs that I burned to the CD have disappeared, they are there, but they won't play it is as if they have been deleted, a window appears saying that windows media player has encountered a problem when you try to play the file. I did not notice this until after Cd burning a few I can't do more because if I keep going I'm not going to have more songs in my library! I don't know what to do im going crazy, it took me a long time to get all of these songs and now he disappeared! I have Windows 7 Ultimate is the version 12.0.7601.17514 hope that helps

  Hello
   
   
  They were playing before you burn CDs?
   
   
  Method 1:
  
  Open the troubleshooting Windows Media Player settings Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter
  Open the troubleshooter in the Windows Media Player library:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-library-Troubleshooter
  
  Method 2:
  
  This problem may be due to database corruption. You can delete the Windows Media Player database and check if the problem persists.

  Steps to clear the database of windows media player:

  a. exit Windows Media Player.
  b. Click Start, run, type %LOCALAPPDATA%\Microsoft\Media Player and then click OK.
  c. Select all files in the folder and then click on Delete on the file menu.

  Note you don't have to remove the folders that are in this folder.

  d. restart Windows Media Player.

  Note: Windows Media Player automatically rebuilds the database.

  If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:

  a. exit Windows Media Player.

  b. Click Start, click Run, type % LOCALAPPDATA%\Microsoft and then click OK.

  c. Select the Media Player folder, and then click on Delete on the file menu.

  d. restart Windows Media Player.

  Note Windows Media Player automatically rebuilds the database.

• Vista update problems. It goes in a loop when you try to update.

  Vista goes in a loop when you try to update. The loop is as follows: - control panel update windows for checking updates for windows updates-installnew update softwear-install now the user account control continue download and installation of updates = control of update windows for updates on your computer-check updates - so this loop repeat any help woul be received gratefully

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Try to install Windows 7 via USB, El Capitan, Macbook Pro 2011 but get this error "No. BOOTABLE DEVICE - INSERT BOOT DISK AND press ANY KEY ' when bootcamp restart my macbook to begin the installation. Any ideas?

  I am trying to install Windows 7 via USB, (El Capitan, Macbook Pro - early 2011), but this mistake "No. BOOTABLE DEVICE - INSERT BOOT DISK AND press ANY KEY ' when bootcamp restart my macbook to begin the installation. Any ideas?

  You cannot use a USB on Mac 2011 Installer. Please burn the ISO on a physical DVD Windows (a DVD - R Carbon SL on the rate of burning slower is better) and use it to install Windows. The file Info.plist changes only allowing the creation of USB, but does not fully support a USB Installation.

• Cannot boot from CD - Windows 8.1 - HP Pavilion n209TX 15 Notebook PC

  Hello

  I burned two ISO files (Memtest86 + & latest version of the ISO software bootable DBAN CD 2.2.8 ) on two different CD - r blank on two different occasions using the Windows burner in my system, also used Cyberlink ISO burner/mount it as a virtual disk file.

  Tried to boot from CD by following step 1 to 4 in this MS link . Once you click on select a USB device, then boot from the internal DVD/CD player, and then click OK. He took the time to process & after that, I got this screen:

  

  When I entered the BIOS Setup by clicking on F10 and there on the Boot device options, I got this screen:

  

  I am not able to understand why I can't boot from any CD. Could someone help me please.

  Thank you very much in advance

  Visruth

  Hi Visruth,

  Thanks a lot for your kind reply!

  My laptop comes with FreeDOS and at the beginning, even I had this problem, but for me it turned out that the USB is not bootable.

  For me the best software to make a startup disk is - http://rufus.akeo.ie/ it's free and open source and its really light.

  Have you tried to boot via the DVD on other PCs. Because if the other DVD/CD, work on your laptop, there might be a problem with the DVD that you are using.

  Have a nice day ahead!

  Kind regards

  Brahmnoor

• What does Err1 and Err3 when you restart your PC with Windows Vista?

  What does Err1 and Err3 when you restart your PC with Windows Vista?

  Hi MichaelNessel,

  1. What is the full error message that you receive?

  2. don't you make changes on the computer before this problem?

  3. What is the brand and model of the computer?

  Please provide us with more information about the issue so that we can provide you with the necessary assistance.

• (Windows Vista Home Premium) 800b0100 error code when you try to install the two (KB978338) and (KB968389)

  (Windows Vista Home Premium) 800b0100 error code when you try to install the two (KB978338) and (KB968389)

  I tried all the recommended solutions that Windows can throw at me, and yet I still can't download these updates for some reason any. Whenever I run the program "Microsoft Fixit" he says it's a mistake and fixing it with success, but I still get the same error when you try to install the updates. I have checked for malware, scanning my computer everything and see nothing.

  Hello

  1. what troubleshooting steps are carried out to solve the problem?

  2 were there any hardware or software changes made on the computer before this problem?

  Method 1:

  I suggest you to return the item and check if it helps:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2:

  Check out the link and check if it works:

  Windows Update error 800b0100

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-800B0100

  Method 3:

  I suggest to put the computer in a clean boot state and then try to open the program and check if it helps.

  Note When you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.

  How to solve the problem by running the clean boot in Windows Vista:
  http://support.Microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

   

  Reference:

  You can download updates manually from the link below:

  http://www.Microsoft.com/downloads/en/default.aspx

  It will be useful.

• "windows can not find the new updates" when you click check updates

  Hello, I'm sorry for the confusion caused with my previous post. The error I got is 'windows can not find the new updates' when you click check updates. It displays a notification to install the new updates on the desktop and displays the 80072EFD error code. Please help me to get this resolved. Its 32-bit windows 7.

  OT:

  Windows

  First, update your anti-virus software and run a scan completes. Then:

  If you have not already seen it this article, it may be interesting to read through to check it out - http://windows.microsoft.com/en-us/windows/windows-update-error-80072efd#1TC=windows-7

  If it still fails to run the resolution of the problems of Internet connection (from Control Panel) and see if that finds & correcting something. More details here - http://www.dummies.com/how-to/content/how-to-troubleshoot-windows-7-internet-connection-.html

• "the key to upgrade to an edition of windows does not work with Windows Anytime Upgrade" was the message received when you use the code comes to purchase Microsoft online. Any suggestions? »

  Upgrade Windows 7 Home Premium to professional.

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

• Domain controller goes down

  1. In my office there a server domain controller and an additional domain controller server and my DC is descended from some hardware problem, I have system state backup, so please tell me how to recover my DC.
  2. Please tell me how to monitor the Windows 2008 servers, DNS, DHCP, and ADC domain controller

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Problem connecting to the ESX Server in the Windows domain controller workstation

  Nice day

  I'm trying to set up a lab for the test server ESX 4 on VMware Workstation 7.1.1 running in Ubuntu 10.04 LTS.

  Basic configuration is such;

  Windows 2008 R2 AD domain controller

  IP: 192.168.9.103

  SM: 255.255.255.0

  DG: 192.168.9.1

  ESX1 host

  IP: 192.168.9.109

  SM: 255.255.255.0

  DG: 192.168.9.1

  Both are configured with Bridged networking in my computer. I can ping the system Windows 2008 in my Ubuntu system, but cannot ping the ESX 4 server.  I can ping the DG of the Windows 2008 system, but cannot ping the DG of ESX4 system. I ping the ESX4 server by IP address and name for itself. I added a DNS entry in Windows 2008 for the server, ESX4. I can't ping the Windows Server 2008 of ESX4 host.

  There is an entry in/etc/hosts on the ESX host to IP address and the name of the ESX host. If I look at/etc/sysconfig/network-scripts/ifcfg-vwif0 I see doing a show at the 192.168.9.255, IPADDR 192.168.9.109 in sysconfig there is an entry for the ESX host name thats right, pointing to the front door of 192.168.9.1 using GATEWAYDEV = vswif0, n - route shows 192.168.9.1 as the UG.

  All tests seem to indicate a problem with the default gateway that is used to communicate between these 2 VM.

  If someone could please provide suggestions as to where I could look, I would appreciate it.

  Kind regards

  powderskier

  AFAIK, you must enable Supreme mode for the virtual ESX using Linux as a host.

  See my notes http://sanbarrow.com/vmx/vmx-network-advanced.html

  _________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

• Windows 7 slow log process when you restart

  I have a HP Pavilion dv4-2049wm with Windows 7 sp1... I recently sent my laptop to be fixed through the guarantee thanks to a 2-year extended service plan that expired recently after that she came back to me. He was sent because the backlight has went out on the LCD screen. When I noticed that my volume and wifi touch buttons have been blackened and not working and also my LCD display wouldn't go to sleep when I closed the top of the page despite all my settings to tell. I had to reinstall my display drivers and I have also flashed my BIOS, Insyde F.18. Everything worked fine, but no fixed... now when I restart my laptop, windows is going to close, it is spin the circle beside logging off... He will sit like that for an hour and does not restart because he can't get out of logging off windows process restart, so I am forced to stop by pressing the power button. Anyone know of any solution to the problem of sleep and restart the problem? Or have any suggestions I can try? Thanks, any help would be appreciated!

  Hi Teytey,

  Two ideas:

  Wrong program:

   

  Looks like a program is blocked running and is not able to pay attention to the "cease and desist" message Stop message sending when you try to shut down the computer.

  Computer keeps (Windows 7 or Vista)

  When the programs will block this way, they are not working properly or in a State where they can be stopped by normal means.  They "cannot hear' instructions from the outside as they can be in a loop of the code that does not include an exit door, or a way to listen to instruction to stop going"round in circles.  This can be causes by stupid code or by errors in the file system.

  What can you do?  You can take a look at what is currently running on the computer and to take preventive measures, i.e. control what is running on the computer and get rid of it, advance - before it's time for you to shut down the computer.

  What program is causing the problem?  Unknown.  You will have to do some detective work.

  =====================================================================================

  An hour before today:

   

  You can also try to "back in time" when it was not the case.  This could be possible if the situation of error developed after you have installed the new software, after you have changed something important on the computer, or after updates have been applied by the system.  In all these cases, a Restore Point can have been created, in which case you can track a time 'before this date' and sometimes to recover your computer Setup and the ability to start and stop down, as expected.

  • Do NOT, DO NOT confuse restore with recovery.  Restoring is a set to a 'time before today. '
  • Recovery is a destructive wipe of data and a resinstall on your operating system.

  How to use Restore:

  HP Notebook PC - using Microsoft System Restore (Windows Vista)

  Restore Windows to an earlier Point (Windows 7)

  Computers HP - using Microsoft System Restore (Windows 8)

  Reference

  Implementation of restoration and System Restore Points:

  Before making any changes on your computer, you can ensure that you have a Restore Point.  If things go on the side, you can "go back".  It's the system restore.  Once you have enabled the restoration of the system, the computer will automatically restore Points before many program facilities.

  You can also create a manually restore Point.

  Be sure to only restore the Protection is enabled for the drive C:\

  AND

  Control Panel > display icon > system > System Protection > create a Restore Point

  =================================================================

  Safe Mode system restore:

  • Turn off the laptop completely.
  • Restarting...  As soon as the laptop starts to boot,
  • Keep clicking on F8 until you enter the Windows Recovery Console
  • Find and select "Safe Mode" > enter

  Once the system starts in Mode safe:

  Start > search / type 'restore' > click to open "System Restore."

  Select a Restore Point PRIOR to the point where the problem started and to restore.

  ====================================================================================

  I hope this helps.

  =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

  See a Post that is useful - or who teaches you something you didn't know?

  Your HP Experts strive to help.

  Click on the star of congratulations!  It's a big 'thanks' for the author.

  =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

• Satellite L - cannot boot from disc of Windows 7 32 bit

  When trying to install the 32-bit version of Windows 7 from the cd/dvd that came with my computer noting happens.
  I inserted the cd and restart the computer, but the installation does not start.

  The computer is running windows 7 64 bit I want to change to 32 bit

  Hello

  You can boot from another drive? Maybe that Windows 7 is noisy and so it can t be read correctly.
  Check this box!

  If you want to downgrade from 64 bit to 32 bit you do a fresh install. This means that you need to clean your current Windows partition so backup all files first!