23-1014: ds8a8sh

Similar Questions

• Wireless card for the s5-1014 model

  Apparently, my wireless card is dead in my HP Slimline s5-1014 model.  Should what card I buy to replace?  Running Windows 7 Home Premium currently sound.

  Hello @TKV03,

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I understand that you do not want to replace the WLAN card.  I'll be happy to help you with this!

  Your office has a PCI Express x 1 slot minicards.  This is where the wireless network card must be.  You should be able to replace it with the same card.  You can view the diagrams below, to see the location:

  

  

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• Satellite M70: Bios shows 1014 MB of memory instead of 1024 MB

  I HAVE TOSHIBA, WITH 512 MB DDR2 RAM, M70
  WEEK ago, I ADDED 512 DDR2 RAM (533 MHz)
  THE PROBLEM IS ON THE BIOS IT SHOWS THAT I HAVE MEMORY RAM OF 1014

  I THINK THAT IT SHOULD BE 1024 RAM
  WHAT IS YOUR OPINION
  Thank you

  @ Muhannadfa: take advice from mOOni nothing wrong with your laptop. The graphics card takes a main part fo memory and that's why you'll notice a difference of 10 MB

  @ mOOni: It s not 8 MB but 10Mo ;) 1024 1014 = 10 ;)

• HPE h8 1100it: hp 1100it IDT Beats Audio Driver Windows 10 after build 1014 *.

  Since I've upgraded my pc from the build 1014 * to the 1015 * series my soundcard could not work. I tried to update my driver with the X version 8.1 64 uploaded by HP in the hp h8 1100it support page but I can't still use it properly... the program starts (audio beats) but also if I clikc on the speakers 'try', he says that the device is unable to make any noise (direct translation of which appeared in Italian).

  Maybe the driver version is old, he will not start... but I need to work again! How can I solve it? Thank you!!

  Enrico

  Windows 10 is not final. Expect bugs. HP will not provide support for this right now.

• Need to do an install on HP Pavilion Slim s5-1014 own format product no. QN653AA #ABA

  I have two HP Pavilion Slim s5-1014, product no. QN653AA #ABA. I don't remember if these included PC a restore disc when I first bought them or not but in any case I need to do a clean format and re - install. What is the best way to do it for this model, y at - it an option of re - install included on the hard drive or I have to buy a restore disc? If what I need is already on the hard drive, specifically how to do a clean format and install? If this isn't an option and I need a restore disk, what is the PN for the restore disc and where can I order one?

  Hello

  Please find the link given below will guide you how to perform a restore using the partition. In case this does not work, you can order the recovery disk.

  Performing a recovery of system HP (Windows 7)

  Looking for recovery disks

• Where can I download the driver for my keyboard MS Wireless MM model 1014 - 1.1

  I have the Microsoft wireless multimedia keyboard above model 1014, 1.1, bearing part No. WUR0445, X 801524-100, but have lost my cd for it.  Is it possible to load the keyboard of the current model similar to mine, that is, client hardware/software /-download driver I could use, please.  Let me know, I'd feel grateful.

  Kind regards.

  Malik N

  Microsoft site for the keyboard drivers:

  http://www.Microsoft.com/hardware/en-us/downloads

  I think that this could be for your model

  http://www.Microsoft.com/hardware/en-us/d/wireless-multimedia-keyboard

  Tom Ferguson

• HP DVD A DS8A8SH device. CdRom SATA stopped working code 19

  MY HP laptop has a problem.  The DVD drive has stopped working.

  HP DVD a Beltway. DS8A8SH SATA CdRom

  An error code 19 registry error.

  I use CCleaner for registry error and have reinstalled the driver, but none solved the problem.

  Can someone please?

  Thank you

  Hello

  Try to follow the procedure at the title of the subheading 'Manually set the registry entries corrupted' on the link below to remove the upper and lower filters and see if that helps the issue.

  http://support.Microsoft.com/kb/982116

  Kind regards

  DP - K

• HP-S5-1014: s5-1014 green blinking on power supply

  I have a S5-1014 HP that I'm fixing for a friend.  I was told he was "struck by lighting.  I know that the mouse and keyboard no longer works which was connected to the computer.  I tried pluggin a power cord to the power outlet, but the computer does not illuminate.   The light flashes green on the back of the power supply and in the Ethernet port (flashes in unison with the power light).  If I disconnect the connector 24 pins of the power supply to the motherboard, with green go light fixed (with the power always connected), but he will return to the State once the connector 24 pins reconnects.  I tried another power supply to start the computer, but he was not long and narrow like what's in the computer and I have had no success.  Is that going to be a question of power power or a motherboard problem?  As I said, the mouse and the keyboard that was connected to the smoking machine working as well at the same time.  Any help is greatley appreciated.

  OK sorry I'm misunderstanding you. Food must also have a fixed light (no Flash).

  If a good diet known flashes on this mobo also and considering what is the root cause of the problem was, her toast.

  This 250 watt PSU is also cheap and not worth trying to save. A mobo that had a surge go through it, although it may work ok in tests, potentially will give you problems later and the client will just come back to you free of bugs and be upset did not set you right the first time.

  I recommend their (just my personal opinion ) to get a new system and save you headaches.

  As you said, it fried the keyboard and the mouse.

  That's why I mentioned to sell them on the idea of getting a UPS surge protector to plug the computer on the next time.

  Not a power strip, but a real surge protector.

  It will be useful.

• Display driver for Dell Vostro 1014

  I recently formatted my Dell Vostro 1014 and installed Windows XP. All the drivers downloaded from the website of the manufacturer installed. Unfortunately, the display driver is not available on their site. Anyone providing a link to the driver for "Mobile Intel (R) 4 Series Express Chipset Family ' for this model will be highly appreciated. Thanks in advance!

  It's not that hard... http://www.intel.com/content/www/us/en/search.html?keyword=mobile%20intel%204%20driver&lstLanguages=en_US

• My Dell 1014 works on Windows Vista and I want to install Windows XP on it. "I am train to install a version that is older than the version that I already have."

  My Dell 1014 works on Windows Vista and I want to install Windows XP on it. When I insert the XP CD and try to install, the system throws a message saying that I am trying to install a version that is older than the version that I already have. How to solve this problem?

  original title: Windows XP installation

  Hi Ribhu,

  How did you start the Windows XP installation? This is the start of the Windows CD or Windows itself?

  You can try a new installation of Windows XP after formatting the hard drive Vista and check.

  You can consult the following wire link and check if it helps.

  How can I replace Vista with XP?

  Note: The above mentioned thread contains third party links.

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Also check out the link:

  How to install or upgrade to Windows XP

• Wireless keyboard model 1014 & Model1025 Microsoft mouse on Mac

  I use the wireless keyboard model 1014 & Model1025 Microsoft mouse on Windows XP, but I want to put them on a Mac. How can I install them on a Mac?

  Hi nataliagomes,

  In order to use the devices, you must download and install the software of the device for Mac on Microsoft Hardware Web site.

  You can find more details about the product on the website. See the following link and select the appropriate product.

  Microsoft Hardware - download the software

  Microsoft Hardware - Documentation

• HP Desktop PC 23-1014 - want to extend the display of page time

  23-1014 HP desktop PC - my time view page for internet viewing isn't that 20 seconds, after that time, it then stops and returns me to the start mode to return my password - to return to the page I was reading. How to extend my page look at a time of one minute or more?   Swordfish 55

  Hello

  Check the following points.

  Right-click on an empty area of the desktop and select Personalize.  Click the link to screensaver at the bottom right.  In the next window, you can adjust the time before the screensaver kicks in the menu drop-down 'Wait' and Remove the tick in the box next to "in»the logon screen curriculum vitae  Click on apply, then Ok to save the change of the parameter.

  Kind regards

  DP - K

• HP Pavilion slimline S5-1014, sound

  HP Pavilion slimline S5-1014; How will I know if I need to buy external speakers? If I take off the helmet, there is no sound - is this the only way? Please advise, thank you.

  Hello:

  Yes, you do.

  I don't know any consumer of HP PC that comes with an internal PC speaker as does a business office.

• VerifyError: Error #1014: class qnx.pps::PPSChannel not found.

  Hi all

  Recently, I worked on a Swipe_Down menu for an app that I'm building for the PB.  At this point, I have to explain that without the prior support of Zezeke and Jtegen, I would have probably less hair that I already do!

  Its also worth mentioning, I'm NOT a programmer and am embark on what interested me much.

  Ok!  I now have zero errors in my application and can build very successfully and transfer it to my PB.  But the menu slide down does not work, I then went into debugging and this is the error I get.

  VerifyError: Error #1014: class qnx.pps:PSChannel could not be found.

  in stock / ___stock_Application1_creationComplete ([F:\projects\stock\src\stock.mxml:6])

  at flash.events::EventDispatcher/dispatchEventFunction()

  at flash.events::EventDispatcher/dispatchEvent()

  at mx.core::UIComponent/dispatchEvent() [E:\dev\4.y\frameworks\projects\framework\src\mx\core\UIComponent.as:13152]

  to mx.core::UIComponent / set initialized() [E:\dev\4.y\frameworks\projects\framework\src\mx\core\UIComponent.as:1818]

  at mx.managers::LayoutManager/doPhasedInstantiation() [E:\dev\4.y\frameworks\projects\framework\src\mx\managers\LayoutManager.as:842]

  at mx.managers::LayoutManager/doPhasedInstantiationCallback() [E:\dev\4.y\frameworks\projects\framework\src\mx\managers\LayoutManager.as:1180]

  Simplyput, this would be probably more clear to me if it was written in Zulu!

  Please can someone shed some light on how I overcame this and get the menu appears on the PB?

  Thank you very much

  Bob

  I do not know MXML, I use pure AS3. You have a method that creates a menu, but this method is not be called anywhere if I see correctly.

• Several event ID: 1014,11, 1, 1530 and so on...

  Today, I searched all the resources that I have to get my problem is solved. My problem is, I use internet via dongle, since the previous 2-3 days, I noticed quite awkward kind of activities as connection is on but no internet access, the important download rate (with 130 Kbps). I uninstalled the software dongle and reinstalled again but no results.  Dongle behaves abnormally.

  The internet speed is horrible.

  I don't understand what is happening? When I looked in the event viewer there are the IDS of different events (error and warning types) 1, 10, 11, 1530, 1014 (the most common), 37 (7) (this was also the remarkable one) and so on.

  I need help desperately. What should do? Please help me.

  I have drawn your attention to a report of Application advising that your computer is called a named Reliance Smart GSM 3 G connection and does not connect. This a repeat mistake. I gave an example short your viewing Application event log error. The error is code 633. Open the link provided and go to line Fix 633 the port is already in use or is not configured to access remote dialout. Click Correction after 633 to see how to solve the error.

  Fixed error 633 could resolve your complaint, I noticed quite awkward kind of activities as the connection is on, but no internet access.

  You have an another event ID: 10 error in your Application log. The solution is to run the Microsoft Fixut in this link:
  http://support.Microsoft.com/kb/2545227