252 Fax error code

Similar Questions

• Fax error code 388 - how to fix

  Hello, I just put our J6480 to send and receive faxes. I tested it and am able to receive faxes, but get error 388 when trying to send a fax. I put the J6480 use the same line that our another fax machine used before he died Tuesday, (Ricoh fax/copier). We had no problem with faxing so far. Any help would be appreciated.

  Thank you in advance. UteMtn

  @UteMtn
  I'd take a glance on the document below, it describes which means that every fax error code. It seems that the means of 388 error a lot of noise on the line.

  Fax error codes

• What is the fax 346 error code? OfficeJet 6500 a, Windows 8

  Is there a list of fax error codes and what they mean?

  There is a document with a list of the fax error codes located here

  It provides an explanation and a general troubleshooting for each error code, as well.

  I hope this helps.

• Error code 326/327, AIO OJ8600 Pro and JO 4315. Unable to connect to an enterprise fax server

  I have an Officejet 4315 old and a brand new Officejet Pro AIO 8600.  I can't move a fax to a seat of Metlife...  I called the office and they disavow problems with their machine (they receive several faxes per day 100).  I get the error message 326 (communication failure) each time.  Two faxes handshake correctly, and specifies the ID of the server corporaste.  My phone line using FoIP with U-verse.  I don't have any problems of a stand-alone fax in the Prosecutor's offices, etc.

  Hello!

  I'm sorry that you have this problem. Fax error code indicates that it is a problem with the condition of the phone line. One of the recommended solutions is to disable ECM, you can normally disable this option in the Setup under Advanced fax settings menu. I hope this helps!

• 8710 HP all-in-one: fax error 346

  I get the error message 346 when sending faxes.  I have faxed to other numbers and he's been through.   Fax 888-HP FAXME and got a return fax.  I tried Dow to slow speed and it did not help.  What can I do else?  I can't work like this!

  Hi @dorcase,

  Welcome to the HP Forums!

  I noticed your post that you found the error fax 346 with your HP Officejet 8710 printer all-in-one. I'm happy to help you!

  This error means that the remote machine (person you send) responded to a fax on the local computer command because the connection has been lost. These errors can occur if the phone lines in the region to be faxed are old or there is noise (static on the telephone line). Other reasons can include power outages and other problems related to food.

  New attempt to receive faxes when telephone line conditions improved. Call phone provider if the driving conditions fail to improve.

  Source: Fax Error Codes and Solutions.

  If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  Best regards!

• Receiving an error code 344 when sending faxes.

  How to solve an error fax 344?  I sent to this address before and it worked fine but now I receive the error.  I use an Officejet 6500 a.

  Thanks for your help.

  Hi decisions13,

  The error code means that the remote computer did not order to fax on the local computer, because the connection is broken. If you have sent faxes to this number before successfully, then you can retry the transmission by fax at another time when the condition of line have improved. You can also run a test fax to your printer and check if all tests pass. A line test can also be performed by your phone company, stable fax make sure line conditions.

  You can also disable the Mode of Error Correction by the menu of configuration (on printer) > Fax configuration > Configuration of advanced fax > Error Correction of Mode > Off.

  I hope it works for you!

• Error code on Samsung CD-R/RW SW - 252 s 22.

  I have a HP pavilion a845w. 22 error code displays Device Manager.  Recently, I have cleaned the inside with air blow off the dust and checked for loose wiring see if that might be the problem. The IDE cable is secure and the power plug is tight. I found 4 loose threads that I have no idea where they're going or if they are to add ons. Hard drive 2 emanate from the 5 P connector they are labelled the longest P6 and 4 P. They don't seem to connect to what I could see on the phones. The connector P2 emerges 2 P3 and P8 branches, they also seem to connect to anything that I can see on the motherboard, there seems to be a socket open the CD burner to the left of the IDE cable. But I don't know if one of these branched conectors should be plugged into them. Before I reached the upper filters and lower in the registry I wanted to check that 1 of these sheets has gone to something on the motherboard or a CD burner and where it is attached. If it is mearly a case of plugging a connector I didn't clear the filters and to uninstall the drivers, if it was not necessary. Help please!

  Hello again mike875,

  Thank you for the update on the status of your question. I'm you provide a link to a document of support About.com: How to challenge 22 errors in Code, that will guide you in the resolution of this error 22. There are different steps to allow you to take I believe correct your mistake and get your CD-ROM back operational.

  Please re post if it does not work and I will look into the matter further. Thanks for posting on the HP Forums again. Have a great day!

• Photosmart Premium Fax series: error code 11471108

  Received error code 11471108 when you try to print from my desktop Gateway computer?   JP

  Hi @toano

  I can't say what is originally this 11471108 troubleshooting error code, but I'd love to help you understand and work towards a resolution.

  Performing printing and Scan doctor could help. Printing HP and doctor Scan is a free utility (tool) that allows to quickly solve common printing, scanning and connectivity problems, including but not limited to:

  • Connectivity:

    USB: Check that the USB connection from your computer to the HP product works properly.

    Network: Verifies that the network connection between your computer and your network is working properly.

  • Device Status Test: checks the errors of the device, such as paper, paper jams, stands transport and paper issues and provides instructions to resolve the error.

  • Driver: checks the driver missing or corrupt files.

  • Device Manager: check the problems in Device Manager that could prevent printing.

  • Device online: check if the product has been suspended or put in offline and then sets the State back in line if necessary.

  • Print queue: checks and clears pending print jobs in the print queue (a newspaper for printing waiting to print).

  • Port Match: check the port settings for the HP product.

  • Device conflicts: check the conflicts with other drivers, such as the other brands of printers.

  • Ink issues: check the cartridges and the ink levels for issues that affect the print quality.

  • Print settings: check and adjust the print quality settings.

  • Test print: print a test page for the assessment of the print quality and provides options for cleaning and if necessary print head alignment.

  • Scan tests: check the scanning mechanism, drivers, and registry entries.

  Source:try the HP Print and Scan Doctor for Windows

  Click here to download and run the print and Scan Doctor > > www.hp.com/go/tools

  If this does not resolve the problem, after back and let me know if there are all the symbols except the Green checkmarks and what they are next of course. The key is not always easy to identify the key and check mart are in the green circle.

  • If you see only the Green checkmarks (), the tool did not find any problem.

  • If you see green sides (), the utility identified a problem and fix it automatically.

  • If you see yellow exclamation points (), the test failed and requires monitoring of the user, but the step was ignored.

  • If you see a red X (), follow the onscreen instructions to fix the problem.

  Thanks, I look forward to hearing back on your part.

• My 3310xi is getting a 0xc05d2381 error code, which is unable to fax, print, or copy. What is the solution. Thank you

  3310xi is to get an 0xc05d2381 error code.  Ink system has failed.  Unable to copy, receive phases or printing.  See documentatiom of the printer.  Thank you for your help.   Windows XP

  Generally, these 0 x codes indicate an internal error state in the printer.  Generally, these are related to the ink system, but not always.  Your printer says ink system failure in the error message?

  Also, see the steps in the document found here to solve this error code.  Let me know how it goes.

• HP Officejet Pro e-all-in-8610: HP Officejet Pro 8610 - error Code: "0xc19a0013" (printhead missing or failed)

  I bought the printer (e-all-in-one printer HP Officejet Pro 8610) in January 2015.  The printer was working properly - fax, copy and scan, until two days ago.  Now, it doesn't print at all.  Received an error code: "0xc19a0013" (missing or does not have the print head).  An expanded version of the error code reads: "the print head seems to be missing, not detected, or incorrectly installed.  Error: 0xc19a0013.   The printer uses a removable printhead, HP Ink cartridges (black) 950 and 951 (cmy).  I used the diagnosis of HP support recommendations: all software and firmware for this printer is installed. HP ink cartridges are not low or empty; remove the printhead ink cartridges and reinstall them.

  There are several steps in the recommendation of troubleshooting, but I stopped to lift the printhead.  Because of my technical inexperience, and there were too many ceveats (attention, attention, proper relocation and etc..)  with the removal of the print head which could cause problems more serious.  Then, I stopped to remove and clean the print head.  Also, used the doctor to Scan printer HP for assistance. Tool to clean the printhead does not.   What worries me most with the 0xc19a0013 error code is his explanation: the print head seems to be missing, not detected, or incorrectly installed.  I can use all the help I can get to understand what is happening with the error code that I received and the resolution of the printer malfunction.

  Contact HP technical support at the 800-474-6836 for more options.

  If you do not live in the United States / Canada region, please click the link below to get help from your region number.
  Language-country selector.

• OfficeJet 7500 E910 model: 0x61011bed error code

  0x6011bed error code is displayed once the printer performs an impression and to enable again the printer requires a lot of button pushes on the display of messages of 'OK '.

  I have turned off the Officejet 7500, disconnected from the power, waited a minute, deleted and reinstalled ink tanks and the print head, sucked and bluff visible dust but still cannot make the mistake go away for very long, with usually error code return after printing (print or receipt of a fax).

  I perform the extra step or need of cleanup for more than just a job printing after the error code clears?

  An additional observation: If the print job is multiple pages, once started the Officejet 7500 completes the task, but is to begin after the error code displayed is the problem.

  Hey @pauledinger,

  Thanks for getting back to me on this subject.

  Because you also get a paper jam error, you can click here to access the paper jam good troubleshooting steps. Once the support document opens just review the Solutions proposed to ensure that no paper or debris is hidden in paper path in your product. Support document also guides you through the rollers for the cleaning of the printer. Regarding a paper sensor, you can not clean the sensor itself. In addition, if the sensor is defective, it is a non-replaceable part on this model of consumption of the product. Therefore, a replacement of the entire unit would be necessary.

  After the jam troubleshooting steps, please try printing. If the error persists, can please click you here to send last programming Firmware update to your printer. The Firmware is the "brain" of your printer and control that made your printer and how your printer it. If there is a corruption in the internal programming in your printer, it can cause performance problems. Your printer must be in a State of 'ready' to 'send' to update the Firmware of the product. If your printer indicates a status of error on the Panel until the firmware update will most likely fail. Once the firmware update completed test print to see if the problem has been resolved.

  If the error state persists after checking for jams and completing the update of the Firmware a replacement of the entire unit would be the next step.

  Please let me know if the troubleshooting steps I've provided resolve this error state. Good luck!

• Windows XP print spooler 1068 error code

  I have an error code 1068 print spooler.
  The fault has happened today 28/04/2012
  I've been using a Canon MP240 printer for 4 years.
  The print spooler is set to automatic.
  I followed the instructions and I have following error messages
  The dependency Service or group was able to start.
  This message appears in LexBceS & Fax
  I am using Microsoft Windows XP,
  Home Edition,
  Version 2002
  Service Pack 3

  As I wrote when you posted this question identical at the end of the outdated threads.

  I don't really know what "instructions" may be followed.  There are a lot of 'instructions' in the old thread.

  It is also important to give the full text of the error messages, rather than paraphrase as you did.

  All I know is that you have a Canon MP240 printer which does not work because the print spooler is not running.  And the reason for which the print spooler is not running is probably because you were at the same time a Lexmark printer (or a badge printer Lexmark Dell) and this printer has been poorly uninstalled.

  I don't know if your printer Canon already worked and if he did, what happened just before it stopped working.

  You might have noted that I asked several questions of the person who initially asked to return in November.  You have answered them yourself to save time.

  Please provide the full error message.

  Do you now or have you ever had a Lexmark or Dell-badged Lexmark printer installed?

  What happened just before the printer who stops working?

  And what version of Windows is installed, including service pack? [You said it; Thank you.]

  Also, I don't know if you have a fax modem that you want to use Windows XP fax services.  I ask this because when you paraphrased the error message you received, you mentioned 'Fax '.

  Normally, the fax service depends on the service print spooler, rather than the reverse.  If the print spooler service does not start, then the fax service also fails to start, so I expect that you might have seen two distinct error messages. .... But I'm just guessing.

  To save time - and with the caveat that this is based on guessing the answers that you have not yet provided - what follows will likely restore your printing capacity.  You WILL need to do the "special procedure for computers that have or had a Lexmark or Dell-badged Lexmark printer" before you start step A.

  Often, but not always, the symptoms you describe are caused by a corrupt print job stuck in the queue or a damaged printer driver.  However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs:

  AntiMailware MalwareBytes
  SUPERAntiSpyware

  Do not operate the two scans simultaneously.  Each will take a long time, so start it and then go do something else for a while.

  Cleaning of printers

  NOTE: If after completing step has the print spooler is not always running after you launched the command "net start spooler", you will not be able to follow all the steps in "First Article".  Use of the special procedure for printers Lexmark described below and follow in its first Article.  If still no joy, use the alternative method that is linked below.

  A. Clean on print jobs pending

  • Open a command prompt window (start > run > cmd > OK)
  • Type the following in the black command prompt window, and then press ENTER after each line

  net stop spooler
  del/q '% windir%\system32\spool\PRINTERS\*.* '.
  net start spooler
  output

  B. clean the old printer drivers and install the latest drivers by using the directions in One Article.

  A special procedure for computers that have or had a Lexmark or Dell-badged Lexmark printer.

  Open a command prompt window (start > run > cmd > OK)

  Type the following in the black command prompt window and press enter

  dependent on the spooler of sc config = RPCSS
  output

  Note that there is no space before the =

  If you want to use a Lexmark or Dell-badged Lexmark printer after having done the above, you will need to reinstall it.

  Alternative to the method of his Article: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

• Error code; The parameter is Incorrect

  My operating system is "Windows XP Home." I tried to print a multitude of photos using the "Photo Print Wizard." When I click the link icon in the "picture and Fax Viewer", I get the error code; The parameter is Incorrect. The wizard does not open. I noticed that the icon in the 'Control Panel' folder has changed and the name is 'File' rather than 'printers and faxes '. I made every effort to change, including to remove and reinstall my printer but nothing helped. I can't delete the file or find the root of this folder in 'windows '. It seemed to me that the path of the file has been changed due to a change of name of this file in the path. However, I can still use a printer installed by other software to print. By the way, when I reinstall any printer, I do not see the printer in this file but it always says 'File' in the 'control panel '. The shimgvw.dll file is registered correctly as I can tell. If I try to launch 'Photo and Print Wizard' from the link on the left in the "Control Panel" itself, I just get a beep for error but no error code. The wizard does not start. This wizard is a very important tool to print multiple selections at once. I havn't used in awhile, so I don't know when it is first of all changed. Any thoughts?, anyone? Is there another install name of the package in the wizard to reinstall it from Microsoft?

  THIS WILL SOLVE THE PROBLEM

  1. Click Start> run type REGSVR32 photowiz.dll click OK

  NOTE: leave a space between the two.

  FACT!

  This will re - save the "TheAssistant printing photographs"and it will work from the folder 'My pictures'.

  * However, this does not resolve the question "renaming" of the file folder in the 'Control Panel', 'printers and faxes '.   That remains a mystery, I hope I can solve.

  2. If you are unsure if you have this module, DO a SEARCH using the search tool in the "Start Menu".

  3. If the search shows nothing in the directory... (drive letter) \Windows\System32, and then search the directory(drive letter)\WINDOWS\ServicePackFiles\i386, Scroll to module; photowiz.dll and 'Copy and paste' to your windows folder directory as described above. Depends on your drive letter on which you originally installed "Windows XP". It is usually a letter'C'.

  5. If you had to 'Copy and paste' this module in your operating system folder. Then, you must re-register the above method module.

  Thank you, GARTH

   

• Windows Update KB2491683 failed (error Code: 800 b 0100)

  original title: Windows Update failed KB2491683

  Relative to the update: KB2491683

  Hello

  This update has failed repeatedly. It is the first time this has happened to my system. I am running Vista Service Pack 2. The error code is: WindowsUpdate_800B0100. I followed the instructions for when an update fails and installed Windows
  Setup of launch day, but that didn't work either. I also tried to download it directly from the Microsoft Download Center, but that failed too.

  http://www.Microsoft.com/downloads/en/confirmation.aspx?FamilyId=11a8f240-51b3-4E31-a24a-a235179f3396

  Any ideas on what I should do?

  Thank you

  Marc

  Hi MarcBW,

  Since the update by train to be installed is for the editor to Fax, you happen to have any other software that interacts with faxing?

• 290 in C7280 error code

  I met error code 290 at Fax.What is?

  

  Thank you.