Error code on Samsung CD-R/RW SW - 252 s 22.

I have a HP pavilion a845w. 22 error code displays Device Manager.  Recently, I have cleaned the inside with air blow off the dust and checked for loose wiring see if that might be the problem. The IDE cable is secure and the power plug is tight. I found 4 loose threads that I have no idea where they're going or if they are to add ons. Hard drive 2 emanate from the 5 P connector they are labelled the longest P6 and 4 P. They don't seem to connect to what I could see on the phones. The connector P2 emerges 2 P3 and P8 branches, they also seem to connect to anything that I can see on the motherboard, there seems to be a socket open the CD burner to the left of the IDE cable. But I don't know if one of these branched conectors should be plugged into them. Before I reached the upper filters and lower in the registry I wanted to check that 1 of these sheets has gone to something on the motherboard or a CD burner and where it is attached. If it is mearly a case of plugging a connector I didn't clear the filters and to uninstall the drivers, if it was not necessary. Help please!

Hello again mike875,

Thank you for the update on the status of your question. I'm you provide a link to a document of support About.com: How to challenge 22 errors in Code, that will guide you in the resolution of this error 22. There are different steps to allow you to take I believe correct your mistake and get your CD-ROM back operational.

Please re post if it does not work and I will look into the matter further. Thanks for posting on the HP Forums again. Have a great day!

Tags: HP Desktops

Similar Questions

  • W550s error code POST 2100 with Samsung 850 Pro 1 TB

    Someone had the POST 2100 error code after I installed a Samsung 850 Pro in the W550s?

    I had this happen when I tried to install the Samsung and did a restart hot. The machine should start properly if I completely stopped down but not with reboots.

    The hotfix that is described in the following link corrects this problem for Samsung 850 Pro 1 TB?

    http://support.Lenovo.com/us/en/documents/ht082504

    Using Acronis True Image instead of data Migration Samsung worked like a charm. Samsung costs me a lot of time and frustration with their migration software.

    They should be upfront with the fact that SDM v2.7 does not work with a Lenovo W550s. They are stuck in NIH (not invented here).

    Moreover, I fArrondi that Acronis True Image can cause serious system problems if allowed to run at startup and run in the background. It causes the system freezes in one of my computers. I used Windows 7 msconfig to disable at startup and it will run only when I need it.

  • Impossible to update Samsung printer m2070, error code 80070012

    Original title: update of samsung printer m2070 series

    get the 80070012 error code when I try to update my printer. Please let me know what means this error.

    Hello

    Thanks for posting your query to the Microsoft forum. I will definitely help you with this.

    1. How do you try to update your printer? Is this error through Windows update?
    2. You are able to install any other updates to Windows on your computer?

    There might be some conflicts due to the other Windows updates, I suggest you to update the driver through the Samsung website. Visit Samsung, download the latest printer driver and install it manually. Check the issue.

    Let us know if you need more assistance. We will be happy to help you.

    _______________

    Thank you best regards &,.

    Isha Soni

  • PC Doctor has no error codes

    Help!

    2006 HPc1487c w/2 x 1 GB + 2 x 500 memory abandons geezer year old ghosts and this78 soon to follow.  But made a full recovery and was able to run PC-Doctor, who advised: on the system memory:

    Has no auxiliary fault model Test ME516-3W code

    Checkerboard Test ME516-15W error code

    Market the error code a test of law ME516-18W

    Error code bit low test ME516-14W

    Waling error code a try on the left ME516-17W

    then prompty died again.  Logic tells me that a module of memory went bye bye.  Can someone tell me precisely on these error codes.  Thank you

    rmorrp

    Matched pair means; same manufacturer, same chip type, same size, same CASE, etc.   Would you buy a pair as two memory DIMMs together.  You might have the same 512 MB DIMM in blue locations and the two dimms of 1 GB in black locations.  I balanced in blue locations and matched pairs slots black and they are different manufacturers in my m9200t system. However, I took care to ensure that both ca and tension were the same (Samsung and Kingston DIMM).

    I have Roxio EMC 9, creator of 2009 and 2010 of creator.  EMC 9 went unsupported 2.5 years ago.  EMC 9 has written for 32-bit operating systems, and it will not more than 3 GB even recognize on an operating system to 64-bit with more than 3 GB.

  • HP Pavilion dv6-7020us: driver error Code 28 problems

    Sorry if this is kind of a long start...

    Read that a cause for Code 28 may be due again installed equipment that poses a problem of incompatibility, so...

    First stop, due to problem of hard drive, adequate to get a hard drive again earlier this year. The new current hard drive is "INTERNAL HARD DRIVES DO SAMSUNG Spinpoint M8 ST 1000 L 1 TB 5400 RPM 8 MB Cache SATA (looks like break after" 1000"and"SATA", that's all I can put in).»

    Got Windows 7 x 64 bit installed.

    Ethernet controller, network controller, peripheral PCI, PCI Simple Communications Controller, SM Bus controller, Bus controller series universal (USB) and x 2 unknown device (one of whom I assume is the fingerprint reader) all fail with the error code 28.

    The problem, however...

    With the help of other computers and the family, I managed to get the downloaded files specifically driver installation for Windows 7 x 64 bit, moved to a USB key, ran the files on my computer (with nonworking pilots / that responded to the questionnaire), they seemed of ran perfectly fine and appeared to install correctly, but none of the enumerated factors do not always work.

    Now currently at a loss to know what to do...

    Properties: Details: Hardware ID: value...

    Ethernet controller

    PCI\VEN_10EC & DEV_8168 & SUBSYS_1818103C & REV_07

    PCI\VEN_10EC & DEV_8168 & SUBSYS_1818103C

    PCI\VEN_10EC & DEV_8168 & CC_020000

    PCI\VEN_10EC & DEV_8168 & CC_0200

    Network controller

    PCI\VEN_1814 & DEV_539A & SUBSYS_1839103C & REV_00

    PCI\VEN_1814 & DEV_539A & SUBSYS_1839103C

    PCI\VEN_1814 & DEV_539A & CC_028000

    PCI\VEN_1814 & DEV_539A & CC_0280

    PCI device

    PCI\VEN_10EC & DEV_5229 & SUBSYS_1818103C & REV_01

    PCI\VEN_10EC & DEV_5229 & SUBSYS_1818103C

    PCI\VEN_10EC & DEV_5229 & CC_FF0000

    PCI\VEN_10EC & DEV_5229 & CC_FFOO

    PCI Simple Communications controller

    PCI\VEN_8086 & DEV_1E3A & SUBSYS_1818103C & REV_04

    PCI\VEN_8086 & DEV_1E3A & SUBSYS_1818103C

    PCI\VEN_8086 & DEV_1E3A & CC_078000

    PCI\VEN_8086 & DEV_1E3A & CC_0780

    SM Bus controller

    PCI\VEN_8086 & DEV_1E22 & SUBSYS_1818103C & REV_04

    PCI\VEN_8086 & DEV_1E22 & SUBSYS_1818103C

    PCI\VEN_8086 & DEV_1E22 & CC_020500

    PCI\VEN_8086 & DEV_1E22 & CC_0C05

    (USB) Universal Serial Bus controller

    PCI\VEN_8086 & DEV_1E31 & SUBSYS_1818103C & REV_04

    PCI\VEN_8086 & DEV_1E31 & BUBSYS_1818103C

    PCI\VEN_8086 & DEV_1E31 & CC_0C0330

    PCI\VEN_8086 & DEV_1E31 & CC_0C03

    Unknown device

    ACPI\HPQ0004

    * HPQ0004

    Unknown device

    USB\VID_138A & PID_0018 & REV_0078

    USB\VID_138A & PID_0018

    . . . In my view, that it is all information. I'm sorry if I'm actually still lacking some information. Thanks in advance for the help! I look forward to the answer.

    Hello:

    Here are links to the drivers you need in the order you posted devices... just at the height of the sp # with those on your USB.

    Ethernet controller:

    This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.

    File name: sp56167.exe

    Network controller:

    This package contains the installation package driver for Ralink Wireless LAN to laptop models controllers that are running a supported operating system.

    File name: sp57538.exe

    PCI device:

    This package contains the driver that allows the Realtek card reader in laptop models running a supported operating system. The card reader allows users to read or write to removable storage cards supported, which are typically used in digital cameras, digital music players and cell phones.

    File name: sp56166.exe

    PCI Simple Communications controller:

    This package provides the driver Intel Management Engine Interface (MEI) for the notebook models and operating systems. The Intel Management Engine Interface allows communication between the host operating system and the Intel Management Engine firmware.

    File name: sp56158.exe

    Controller of Bus SM: NOTE: first install this driver and restart.

    This package contains the driver and Intel Chipset Installation Utility for the notebook models and operating systems. This utility allows the operating system to show the correct name for the Intel hardware that is installed in the Microsoft Windows Device Manager.

    File name: sp56156.exe

    Controller of universal serial (USB) Bus:

    This package provides the driver for the Intel USB 3.0 controller host for the notebook models and operating systems. The driver allows USB 3.0 devices.

    File name: sp56164.exe

    ACPI\HPQ0004:

    This package provides the HP ProtectSmart Hard Drive Protection software (HP 3D Driveguard) for the laptop models running a supported operating system. HP (HP 3D Driveguard) ProtectSmart hard drive Protection software protects the hard drive of "parking the heads ' if the laptop fell accidentally, or is suddenly hit by another object.

    File name: sp61037.exe

    USB\VID_138A & PID_0018:

    This package contains the driver that allows the validity fingerprint sensor in the notebook models that are running a supported operating system. The fingerprint sensor analyzes fingerprints for use with biometric security applications.

    File name: sp56403.exe

  • ERROR CODE 800F020B

    Spot on Jess. Now, I had a major update for Samsung failing for weeks on this error code. Finally reading your post. Plugged in my phone and it went straight to no prob. Thank you Jess.

    Best wishes Rob X

    Thank you. I got this error 800F020B code after trying an update for a Brother MFC240C printer. I turned on the printer and tried the update successfully.

  • I get the message: error code: ERR_INTERNET_DISCONNECTED

    Separated from this thread.

    I got an error code of internet disconnect on my samsung galaxy Tablet message 4 a week ago. I tried searching on the web but I have not found anything on this subject. What can I do about it.

    Amy Cutbush e-mail address is * address email is removed from the privacy *.

    Thank you

    Hi Amy,

    For question connects to your device Samsung galaxy, you can check for support on this page options. Hope that the information would be useful.

  • I got the error code 0 x 8040154 while trying to synchronize my phone mobile gallaxy S3

    I got the error code 0 x 8040154 while trying to synchronize my phone mobile gallaxy S3 to outlook using Samsung Kies SW. What can I do?

    Go to Samsung support.

  • do not install updates windows 7 error code 80070643

    Hi, I recently bought a samsung R519 on 18 March 2010, since I bought that I was not able to install updates, I get the 80070643.I error code am also unable to install msn messenger/hotmail. The laptop computer was pre loaded with programs of access to the House scheme, OpenOffice.org 3.2.

    I am a novice, so any help would be greatly appreciated. I tried code 80070643 error nothing works suggestions and a complete loss of what to do next. I've included some updates that will not be installed.

    Update cumulative security for Internet Explorer 8 for Windows 7 (KB980182)

    Update for Windows 7 (KB976264)

    Update for windows 7 (KB976662)

    Update for Internet explore 8 Compatibility View List for Windows 7 (KB980302)

    Cumulative update for Media Center for Windows 7 (KB977863)

    Thank you

    Steph

    Hi, I had to contact the company and they told me to make a full recovery from samsung... It seems to be working now and updated.

    Thanks for your help

    Best wishes

    Steph

  • error code. hd521-2w

    Hard drive - Samsung sp2504c windows xp error code hd521-2w

    The drive failed the SMART short test and returned this error. The error code "hd521-2s" means generally that your hard drive has failed or is about to fail. Please make sure that you have a set of HP recovery disk for your computer and replace the disk hard as soon as possible.

  • Unable to run windows update error code A 8024, 000

    Original title: 8024A 000 error

    I replaced my hard drive recently, and after you install the recovery disk, I am unable to run the window update (error code A 8024, 000). I replaced the hard drive of this computer before and used this disc of recovery before and never had this problem, I even tried to reinstall the drive recovery again and the problem persists. I also tried the solution posted on other peoples issues this using prompt command and it turns out unsuccessful. I also tried to install the Windows Update Agent, which is recommended by some, it starts to install and I get an error saying that it is impossible to install PowerShell. If anyone has any alternatives, I try (in addition to those I've already tried) Please help! Thank you for your time.

    Hi all.

    solution:

    Download the new technology Intel® Rapid storage (RAID) driver 11.6.0.1030 version

    of http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=2101&DwnldID=21852&ProductFamily=Software+Products&ProductLine=Chipset+Software&ProductProduct=Intel%c2%ae+Rapid+Storage+Technology+ (Intel % c2% ae + RST) & lang = fra and install in "normal" mode.

    This works.

    The Windows update error code appears after a hard drive replacement, and most providers have only this driver in version 9. XX or 10.xx.

    This driver 11 version solves the problem with windows Update error A 8024, 000.

    (have this error on 5 different machinetypes (Samsung, HP, Sony Vaio, etc.) and are all now resolved).

  • Commercial error Code 0x8007045D Vista Home Premium Version complete

    Good afternoon... I been up all night trying to find answers to fundamentally
    error codes 2 I receive when you try to install Windows Vista Home Premium full retail
    version, 64-bit and 32-bit. 0x8007045D error code and error Code 0 x 80070003, the first
    0x8007045D code receives most often, and during the phase of installing 'multiply '.
    Files... he expanded on anywhere from 00 to about 50%, taking as long as 45 minutes.
    When the error 0x8007045D code appears. The other code came during other phases of the
    installation, but less often.
    Now, there was a lot of "answers" on the forums online to the same question as above, plus all the
    of them I've read has dealt with Vista and, like me, do a clean-install not one upgrade. Answers
    varied bad hard drive and dvd drive not working not not for RAM (one person said a few years back to)
    not 4 GB of memory, but less than 2). Others have said that the write speed of the
    DVD player was set down too quickly, that... but mine is a full commercial version.  And I have
    Microsoft contacted by chat and phone and the product key is valid.
    Remember, this is for Windows Vista Home Premium not Windows 7 Home Premium.
    I went back to Windows 7 HP, if I can do some research on these error codes. In a few weeks
    I have a new pc built for my Windows 7, but this 'old' pc that I use now is what HP Vista
    will be used, if I can ever get it installed. The SPECIFICATIONS below are for this desktop computer
    PC that I'm tempted to get Vista installed on HP. I'll Tinker (change) with parts
    (hard drive, RAM and DVD drive), but none are too drastic.
    Any help will be greatly appreciated.

    Thank you!!

    Jimmy

    TECHNICAL DATA:
    AMD Phenom II x 4 955 3.20 GHz; Motherboard Gigabyte GA-M68MT-S2P. Hard drive Samsung HD501LJ
    500 gb/7200 RPM/min/16 MB cache/SATA; LiteON DVD Writer SATA internal; 4GBs (2x2gb) DDR3
    Micron 1333 mhz RAM; Radeon HD 5450 x 16 1 GB DDR3 PCIe

    A managed after removing my PCIe x 16 graphics card, used my graphics card built-in, also removed unnecessary devices (printer sound, internet,) before a successful... not a problem at all... almost as easy as Windows 7 :).. also changed the hard drive and no dvd drive before installation... no problem at all. A marked a 5.9 on all 5 of my Windows experience Index Thank YOU Notes!

    Jimmy.

  • Error code 0X800F0246 when installing printer drivers.

    Original title: error code 800F0246 on the installation of update

    I'm trying to install the driver for my printer Samsung ML-1860 and get an error code 800F0246.  I also tried to install a driver for the Samsung CPL-315 and it would not install either

    Hello
     
    (1) were there any changes to the computer before the question?
    (2) what exactly happens when you try to install the CLP-315?
    (3) is the model number of the second printer you are trying to install Samsung CLP-315?
     
     
    See the methods mentioned below and check if that helps.

    Method 1:
    Clean boot the computer and try to install the printer drivers
     
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    Note: Don't forget to return the computer to normal after completing the troubleshooting by following step 7 of the above mentioned link.

    You can download drivers from the link below and check if it helps.
     
    ML-1860 monochrome Laser printer
     
    Steps to download and install the printer driver.
    a. click on the above links and select downloads.
    b. Select the driver from the drop-down and select the universal print driver for Win 2000/XP/2003/Vista/2008/Win 7(32,64bit) in the case of Mono Laser Printer ML-1860
     
    c. Select the driver from the drop-down and select Print Driver (Driver) for Win 2000/XP/2003/Vista/2008/Win 7(32,64bit) of Printer Laser Color CLP-315.
     
    (d) download and install the driver and check if it helps.
     
    You can also download the drivers via Windows update, see the link below
     
     
    Method 2:
    You can contact Samsung support to get help by following these links:
     
     
     
    Click on the above link and click Overview and on the right side of the screen, you can find support options.
     
    Hope this information is useful.

  • 0x8007045D error code when you install Windows 7 Pro 64-bit

    I get an error 0x8007045D code when installing Windows 7 Pro 64 bit on the same same MSI 970 Gaming (AMD SB950 Chipset 970 +) motherboard, even OEM Win Pro SP1 7 X 64 dvd, the installation on an EVO of 840 Samsung 250 GB SSD.

    16 GB of Ram (4 GB X 4 stix. Ran this OS on this forum for a year, trying to do (was) a clean install. I am puzzled, never had a problem like this.

    I was the installation of the operating system, and you're right, when he was on the 2nd works. He remained at 0% for a while then I get this error message "Windows cannot install required files. Make sure all files required for installation are available, and restart the installation. 0x8007045D error code.

    Someone at - he already had this?

    Any help would be appreciated.

    Thank you

    Try to reduce the amount of RAM installed on a unique key and try again.

    If you have several hard drives attached, disconnect all except the disk target hard.

    If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

  • AddMonitor error code: 1805 printer installation

    Original title - add the error code 1805 monitor.

    I am trying to install a samsung d srp 350 printer and get the following error codes that prevent the installation of the software:

    AddMonitor error code: 1805

    AddProcess error code: 126

    AddPrinter driver error code: 3000

    Hi FURNREDDIX

     

    1. are you using a software CD or that you downloaded the latest version of the printer software?

    2. is the printer that is compatible for use with windows 7?

     

    I suggest refer you to the below provided the link of the manufacturer and download the latest compatible drivers installed for the printer.

    http://BIXOLON.com/_eng/download_center/downloadsub.asp

     

    If the problem persists and you don't get a compatible driver then you can try to install the drivers in compatibility mode, then check.

    Try installation and use of Windows Vista or XP drivers (if you have one) in the Windows 7 compatibility mode and check if you are able to solve the problem.

    Compatibility mode is used if a program written for an earlier version of Windows does not work properly. Then, you can use the program compatibility Wizard to change the compatibility of the program settings. To manually change the settings of a program, use the individual program's compatibility tab

    You can check the link for assistance on compatibility mode - mentioned below
    http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

     

    I hope this helps.

Maybe you are looking for

  • Everyone is dismayed to see that there is no password recovery or reset secure put in place for encrypted backups?

    I am absolutely amazed that there is no recovery password for iPhone backups encrypted. (1) no password is required to access the iTunes application. He launched and the phone connects automatically. (2) someone might maliciously put a password. The

  • Does anyone use iCloud for everything?

    Does anyone use iCloud as your main service (i.e. for synchronization, documents of cloud and primary email address)? I mainly use it as my primary service, but finds that she has its drawbacks, especially when it comes to Mail and web messaging on i

  • Satellite U940 - cooling fan loud

    I bought a brand-new U940 Satellite two months ago. Last week, the fan has started to be very strong most of the time.It can cut for a minute, but in general, it is strong. It can also make a sound of scraping by moments. According to my Toshiba Heal

  • Wireless connection on Satellite A60 743 does not work properly

    I can't get any connection to wireless internet with my laptop. How can I use it? This notebook should have wireless, but I tried to connect and nothing happens! Please help me! Best regards NASI

  • Re-install Windows XP

    After finding out from a previous post, (thanks Bill Smithers) I have the Dell Optiplex is not compatible Windows 7, I am trying to re - install Windows XP which was OK before the attempt of Windows 7. Using the original disk of Windows XP to re - in