2620 HP all-in-one printing problem

Similar Questions

• Installation for HP Office Jet 7210 all-in-One printer problem

  I try to install HP Office Jet 7210 all-in-one printer.

  My operating system is Windows Vista Home Premium, service pack 1

  My computer is an AMD Athlon 64 x 2 Dual Core Processor 5000 + 2.61 GHz, with 2 GB of RAM and on the 32-bit operating system

  When I go through the guests to the screen, I get two errors.

  (1) is due to an error of operation. As I have Vista it triggers a caveat, but I understand that this can be ignored and continued

  (2) the system can be installed using the "Run As" command... ». Apparently, I need to re - login as administrator. I am connected with the admin privaledges so not sure how to fix this

  Appreciate your help.

  I'm sure that yu you are trying to install from the installation to Windows XP CD. Try to download the software from THIS page and try to install.

• OfficeJet 8500 all-in-one - printing problem

  My all-in-one Officejet 8500 not print correctly. I checked the cartridges and they are ok. I get out a faded print with lines through most of the colors other than black. What could be the problem?

  Hello
  Seems to me that you must clean the pens.

  You can do it following the steps here:

  http://support.HP.com/us-en/document/c02208875

  You need clean the print heads and align them to solve your problem.

  I hope this helps.

• All in one printer problems.

  I'm trying to find what to do to get my printer to finish early.  When I turn on the power, it will start to make the start up and then it stopped and began to make a rattling noise.  When he clicked for about a minute he then give me an error message.  The message is "Scanner failure".  Under which he tells me to turn off the printer, then restart it.  Yet once, it does the same thing.  I can't print or copy anything.  What would cause the printer to do this and how to fix it?

  Hello

  1. do you remember make changes to your computer before this problem?

  2. What is the brand and model of your printer?

  Try to update the drivers for your printer. Follow step 3 in this link: http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows

• 2545 HP printer all in one: printing problems.

  Printing device do not at all. According to Hp scan doctor, there were questions wz the print queue and the game port and both have been resolved. However still does not print anything. Could someone who are facing the same problem and found the solution pls reply.

  Hey @ValuableV,

  Welcome to the HP forums! I hope you enjoy your stay here.

  I see that you have problems with printing from your Windows PC to your Deskjet 2540. I can help with that. To start, I want to make sure that the printer hardware is working by pressing the button with the light wireless top for 10 seconds. If that then prints the material itself is very good.

  Next, Let's refresh some connections between the printer and the computer. To do:

  1. Turn the printer off.
  2. On your PC go to start and devices and printers.
  3. In this window right click on the image to the printer.
  4. Left click on delete device.
  5. Repeat if you have extra copies of the printer.
  6. Turn on the printer.
  7. If the printer is connected wireless and then once you have a solid blue light the printer click Add printer, and follow the prompts to add the printer to the back.
  8. Try to print.

  Let me know if it helps. If it then please let others know by clicking on accept as Solution below my post.

  I hope this helps and I hope you have a nice day!

• HP Officejet 4630 e-all-in-one printer problem

  I installed all the software and ran all the tests and pass all areas. Test print comes out very well. But when I try to send something to the printer, nothing happens, the printer just sits there. Anyone know what could be the problem?

  I still don't believe it, but I took a chance and pulled the USB out and then plugged in. It worked.

• Photosmart HP 6510 all-in-one: print problems

  I'm having a problem with my black ink print.  I just changed the colors and ink black and still had problems.  I've had a printer status report printed the report quality, cleaned print heads, aligned printer and ink levels checked; showing full.

  I got on the assistance system HP and resolution problems and response, with that she had nothing to do with what I had business to!  I can't find anywhere a 1-800 number to talk to a live person!

  The troubleshooting in the here document steps can help resolve problems printing black with your Photosmart 6510.

  If you call the support number for the United States or the Canada is 1-800-HPINVENt, also see the details here.

• HP c6380 all-in-one printing problem

  System: Windows Vista Ultimate Edition

  Printer prints good quality but will only print a column on the left side of the paper

  It will print from more than one program like that?

  You have the latest drivers for the printer? Click here to download the latest version for Vista 32 bit:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2093&LC=en&cc=us&DLC=en&sw_lang=&product=3560280#n181

• Photosmart C4400 all-in-one printing problem

  My C4400 faithful is not print properly, don't give me indications of levels of low ink and Solution Center says it is not connected. I have replaced the ink (black) cartridge, but still only get a gray print, lineage. I tried alignment heads and cleaning but no luck. Can someone advise me please?

  Hello

  If I understand correctly, the page is faded and has a streaks on the print, when you try to print from HP Photosmart C4400.

  Kindly click on the following link to fix the problem.

  http://support.HP.com/us-en/document/c01004653

  Although I am an employee of HP, I speak for myself and not for HP.

  -Say 'Thank you' by clicking on the star of congratulations in the post helped you.
  -Please indicate the position that solved your problem as "accepted Solution".

  Kind regards

  Vijay

• 4630 e-all-in-one printer problem

  I hung, installed, connected wireless. Printer shows in the print devices, computer communicate with the printer, everything seems in order until I go to print a document, image, whatever it is. Nothing happens. Tried to uninstall and also hooked to a loading disk usb cable. Nothing.

  SOLVED. I took the printer and got a new. Works very well. Must have been this printer.

• HP Photosmart Wireless e-All-in-one printer - problem scanning B110a

  Using windows 7 Edition family, my scanner everything just stopped scanning and stuck at halfway through the last picture of around 200 photos I've been analyze to create a PDF file, it took me forever and I don't want to rescan all these again, nobody knows how to convince the scanner to create my pdf without a new analysis all these images again , I took the backup of all temporary files it creates during the preliminary scan and the creation of the PDF, such as MaglevExpressTemp (1.4 GB), etc... any help is very appreciated

  Okay, so what I thought you meant originally was not that far from reality. Unfortunately, there is not a way that would be easy to convert these files. I would recommend performing the analysis again, into segments of 30-50 and then you can use PDF SAM program to combine those into a single unit.

  http://www.PDFSam.org/

  In its current form is not a way for you to do what you ask in a simple way. It would be less time-consuming and easier to run it again.

  I would like to know if this is the information that you need!

  -Spencer

  PS Hope you have a wonderful day and that your time is as beautiful as she is here!

• 944 Dell Photo all-in-One printer problem

  The message of the "paper jam" bed printer, but there is no paper stuck.  Instead, when I press the "check" button as indicated, the printer stops briefly, and when he goes back, the ink cartridge holder snaps back, making a big noise.  This product whenever I press the button "check".  The fact to unplug everthing has not helped either.  Any suggesetions?

  micaro,

  It sounds like the encoder Strip came off the coast. Read the second thread to...

  Cleaning the MICR band (loud bang of the carriage of the printer)

  Rick

• printer online 6500 all-in-one printer problems

  documents printed, but online printing prints only the border of the text.  Environment is empty

  Thanks for sharing your fix.  Sorry I don't have to you earlier, but I am very happy to hear that you were able to fix it.  If you need to print from Google Chrome and in this case even once, I found information suggesting the Google Chrome was updated.  Otherwise, good impression!

• B1110 HP all in one printer sc: PROBLEMS SCANNING ON MY HP B1110 ALL in ONE PRINTER AS SETUP NEW PC WINDOWS 8.1

  Since the installation of my new pc windows 8 my hp b110 all-in-one printer not scan and when the bottom lines of the text of my printing pages are cut and do not print

  Hi year54,

  Welcome to the HP Forums.

  I see that you are having some printing problems.

  I wasn't able to find the model of the printer you are using.  If I can better help you, please respond with your printer model number:
  How can I find my model number?

  Thanks for your time.

  See you soon,.

• All-in-one HP Officejet 2620: A5 format missing in the all-in-one printer HP Officejet 2620

  I use a HP Officejet 2620 all-in-one printer and I need to print some documents using paper size A5 format but not miss the formats available on the A5 format list box.
  I want to know if there is a way to define this format.

  Hi lucausa75,

  You are welcome!

  To answer your questions:

  I would recommend the HP Deskjet 990c driver, as it supports printing A5. When you change to this driver it can restrict your printer to print only as the HP Deskjet 990c is a printer function only. In order to restore the features of scanning, etc... You may need to return to the driver HP Officejet 2620. But it is possible that scanning, etc. may continue to work with the original drivers as well. The only way to know for sure is to try it and test it.

  If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  I hope that this answers your questions, and I thank you for posting!