2651xm (IOS 12.4(9T) VPN server - default route
When my clients connect to the VPN server, their default route prepared to go through the VPN. If they resemble the State of the connection, it shows "0.0.0.0 0.0.0.0" under the secure routes. I want to do so that one class C subnet is in the list. How can I do this?
Thank you!
This is called "split tunneling". For maximum security, you should not use it.
Never done on IOS myself, but this would contribute to the code snippet:
access-list 150 permit ip 30.30.30.0 0.0.0.255 any
ISAKMP crypto group of hw-client-name client configuration.
HW-client-password key
DNS 30.30.30.10 30.30.30.11
WINS 30.30.30.12 30.30.30.13
domain cisco.com
pool dynpool
ACL 150
Of http://www.cisco.com/application/pdf/en/us/guest/products/ps6659/c1650/cdccont_0900aecd80313bd6.pdf
Tags: Cisco Security
Similar Questions
-
IOS Easy VPN Server / Radius attributes
Hello
I made an easy VPN server installation with a running 12.2 2621XM router (15) output T5. VPN Clients/users are authenticated against Cisco ACS 3.2 by RADIUS.
It works fine, but there is a problem that I can't solve. Each user must have the same VPN assigned IP address whenever it is authenticated.
The ACS sends the right radius attribute (box-IP-Address) back to square of IOS, but this address is not assigned to the client. The customer always gets the next available IP address in the local set on the router.
How can I solve this problem?
You will find the relevant parts of the configuration and a RADIUS "deb" below.
Kind regards
Christian
AAA - password password:
AAA authentication calls username username:
RADIUS AAA authentication login local users group
RADIUS AAA authorization network default local group
crypto ISAKMP policy 1
Group 2
!
crypto ISAKMP policy 3
md5 hash
preshared authentication
Group 2
ISAKMP crypto identity hostname
!
ISAKMP crypto client configuration group kh_vpn
mypreshared key
pool mypool
!
Crypto ipsec transform-set esp-3des esp-sha-hmac shades
!
mode crypto dynamic-map 1
shades of transform-set Set
!
users list card crypto mode client authentication
card crypto isakmp authorization list by default mode
card crypto client mode configuration address respond
dynamic mode 1-isakmp ipsec crypto map mode
!
interface FastEthernet0/1
IP 192.168.100.41 255.255.255.248
crypto map mode
!
IP local pool mypool 172.16.0.2 172.16.0.10!
Server RADIUS attribute 8 include-in-access-req
RADIUS-server host 192.168.100.13 key auth-port 1645 acct-port 1646 XXXXXXXXXXXXXXXX
RADIUS server authorization allowed missing Type of service
deb RADIUS #.
00:03:28: RADIUS: Pick NAS IP for you = tableid 0x83547CDC = 0 cfg_addr = 0.0.0.0 best_a
DDR = 192.168.100.26
00:03:28: RADIUS: ustruct sharecount = 2
00:03:28: RADIUS: success of radius_port_info() = 0 radius_nas_port = 1
00:03:28: RADIUS (00000000): send request to access the id 192.168.100.13:1645 21645.
4, len 73
00:03:28: RADIUS: authenticator 89 EA 97 56 12 B1 C5 C2 - C0 66 59 47 F7 88 96
68
00:03:28: RADIUS: NAS-IP-Address [4] 6 192.168.100.26
00:03:28: RADIUS: NAS-Port-Type [61] Async 6 [0]
00:03:28: RADIUS: username [1] 10 "vpnuser1".
00:03:28: RADIUS: Calling-Station-Id [31] 13 "10.1.14.150".
00:03:28: RADIUS: User-Password [2] 18 *.
00:03:28: RADIUS: receipt of 192.168.100.13:1645, Access-Accept, id 21645/4 l
in 108
00:03:28: RADIUS: authenticator C1 7 29 56 50 89 35 B7 - 92 7 b 1 has 32 87 15 6
A4
00:03:28: RADIUS: Type of Service [6] 6 leavers [5]
00:03:28: RADIUS: connection-ip-addr-host [14] 6 255.255.255.255
00:03:28: RADIUS: Tunnel-Type [64] 6 01:ESP [9]
00:03:28: RADIUS: Tunnel-Password [69] 21 *.
00:03:28: RAY: box-IP-Netmask [9] 6 255.255.255.0
00:03:28: RADIUS: Framed-IP-Address [8] 6 172.16.0.5
00:03:28: RADIUS: [25] the class 37
00:03:28: RADIUS: 43 49 53 43 4F 41 43 53 3 A 30 30 30 30 30 31 30 [CISCOACS:0
000010]
00:03:28: RADIUS: 2F 33 63 30 61 38 36 34 31 61 76 70 75 73 [3/c0a8641a 6F 2F
/vpnus]
00:03:28: RADIUS: 65 72 31 [1]
00:03:28: RADIUS: saved the authorization for user 83547CDC to 83548430 data
00:03:29: RADIUS: authentication for data of the author
00:03:29: RADIUS: Pick NAS IP for you = tableid 0x82A279FC = 0 cfg_addr = 0.0.0.0 best_a
DDR = 192.168.100.26
00:03:29: RADIUS: ustruct sharecount = 3
00:03:29: RADIUS: success of radius_port_info() = 0 radius_nas_port = 1
00:03:29: RADIUS (00000000): send request to access the id 192.168.100.13:1645 21645.
5, len 77
00:03:29: RADIUS: authenticator 13 B2 A6 CE BF B5 DA 7th - 7B F0 F6 0b A2 35 60
E3
00:03:29: RADIUS: NAS-IP-Address [4] 6 192.168.100.26
00:03:29: RADIUS: NAS-Port-Type [61] Async 6 [0]
00:03:29: RADIUS: username [1] 8 'kh_vpn '.
00:03:29: RADIUS: Calling-Station-Id [31] 13 "10.1.14.150".
00:03:29: RADIUS: User-Password [2] 18 *.
00:03:29: RADIUS: Type of Service [6] 6 leavers [5]
00:03:29: RADIUS: receipt of 192.168.100.13:1645, Access-Accept, id 21645/5 l
in 94
00:03:29: RADIUS: authenticator C4 F5 2F C3 EE 56 DA C9 - 05 D6 F5 5 d EF 74 23
AF
00:03:29: RADIUS: Type of Service [6] 6 leavers [5]
00:03:29: RADIUS: connection-ip-addr-host [14] 6 255.255.255.255
00:03:29: RADIUS: Tunnel-Type [64] 6 01:ESP [9]
00:03:29: RADIUS: Tunnel-Password [69] 21 *.
00:03:29: RADIUS: [25] class 35
00:03:29: RADIUS: 43 49 53 43 4F 41 43 53 3 A 30 30 30 30 30 31 30 [CISCOACS:0
000010]
00:03:29: RADIUS: 2F 34 63 30 61 38 36 34 31 61 2F 6 b 5F 68 76 70 [4/c0a8641a
[/ kh_vp]
00:03:29: RADIUS: 6 [n]
00:03:29: RADIUS: saved the authorization for user 82A279FC to 82A27D3C data
Assignment of an IP address via a server Raidus is currently not supported, even if your Radius Server is through an IP address, the router will ignore it and just assign an IP address from the pool locla. In fact, the pool room is the only way to assign IP addresses currently.
On the only way to do what you want right now is to create different groups VPN, each reference to a local IP pool with an address in it. Then ask each user connect to the appropriate by their VPN client group.
Yes, messy, but just try to provide a solution for you.
-
Can't ssh on Mac OS VPN server
I can connect to my VPN L2TP server with my iPhone running iOS 10 through my network of data carriers and passed to my home network from Comcast, but everything does not work;
What works:
Access default Web site running the macOS Server using its IP address
Public Web surfing
I can ping my phone of any system IP address on my network
What does not (what I tried):
SSH to any system macOS on my network
Access screen sharing on any system macOS on my network
Resolve the local hostname to an IP address
More information
my iphone is running iOS 10
My computers are running macOS Sierra
I use Mac OS as host VPN server
I use the client VPN L2TP iOS 10.
Firewalls in the system is disabled.
Typical VPN connections, you use the DNS server of your iPhone and not the DNS server of the network corresponding to your server. In addition, Hello services are only available on the LAN. So you have no way to resolve names to IP adrdesses for the network, you are VPNing.
The only easy solution from an iPhone is to make a list of IP addresses and use them to connect instead of host names. using IPs will work as long as your ISP does not also use the same internal (like 192.168 or 10.0) IP address than the network that you connect to.
-
I have a Cisco 871 router that is connected to the internet. I want to leave a few remote VPN users in the office using the Cisco VPN Client. Currently, I can get the VPN Client to authenticate and connect. However, whenever I try something inside the private network ping I get a response from the external IP address of the router instead. The config is as it is now. If anyone can tell what I'm doing wrong, I would really appreciate it. Thank you!
no service button
tcp KeepAlive-component snap-in service
a tcp-KeepAlive-quick service
horodateurs service debug datetime localtime show-timezone msec
Log service timestamps datetime localtime show-timezone msec
encryption password service
sequence numbers service
!
rtr-test hostname
!
boot-start-marker
boot-end-marker
!
logging buffered debugging 51200
recording console critical
enable secret 5 xxxxxxxxx
!
AAA new-model
!
!
AAA authentication login local userauth
AAA authorization groupauth LAN
!
AAA - the id of the joint session
!
resources policy
!
PCTime-6 timezone clock
PCTime of summer time clock day April 6, 2003 02:00 October 26, 2003 02:00
IP subnet zero
no ip source route
IP cef
No dhcp use connected vrf ip
DHCP excluded-address IP 192.168.0.1 192.168.0.99
DHCP excluded-address IP 192.168.0.201 192.168.0.254
!
IP dhcp pool sdm-pool1
import all
network 192.168.0.0 255.255.255.0
192.168.0.25 DNS server
default router 192.168.0.1
!
!
synwait-time of tcp IP 10
no ip bootp Server
IP domain name bfloan.com
name-server IP 192.168.0.25
property intellectual ssh time 60
property intellectual ssh authentication-2 retries
!
!
Crypto pki trustpoint TP-self-signed-3716545297
enrollment selfsigned
name of the object cn = IOS - Self - signed - certificate - 3716545297
revocation checking no
rsakeypair TP-self-signed-3716545297
!
!
username privilege 15 password xxxxxxxxxxx xxxxxxxx
!
crypto ISAKMP policy 3
BA 3des
preshared authentication
Group 2
!
ISAKMP crypto client configuration group vpngate
XXXXXXX key
DNS 192.168.0.25
won the 192.168.0.25
pool ippool
ACL 105
!
Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT
!
Crypto-map dynamic dynmap 10
Set transform-set RIGHT
!
map clientmap client to authenticate crypto list userauth
card crypto clientmap isakmp authorization list groupauth
client configuration address map clientmap crypto answer
10 ipsec-isakmp crypto map clientmap Dynamics dynmap
!
Bridge IRB
!
interface FastEthernet0
!
interface FastEthernet1
!
interface FastEthernet2
!
interface FastEthernet3
!
interface FastEthernet4
Description $FW_OUTSIDE$ $ES_WAN$
IP address 66.x.x.33 255.255.255.x
no ip redirection
no ip unreachable
no ip proxy-arp
NAT outside IP
IP virtual-reassembly
route IP cache flow
automatic duplex
automatic speed
clientmap card crypto
!
interface Dot11Radio0
no ip address
!
!
interface Vlan1
Description $ETH - SW - LAUNCH, INTF-INFO-HWIC $$ $4ESW $FW_INSIDE$
no ip address
IP tcp adjust-mss 1452
Bridge-Group 1
!
interface BVI1
Description $ES_LAN$
the IP 192.168.0.1 255.255.255.0
IP nat inside
IP virtual-reassembly
IP tcp adjust-mss 1412
!
IP local pool ippool 192.168.100.1 192.168.100.25
IP classless
IP route 0.0.0.0 0.0.0.0 66.4.164.38
!
IP http server
local IP http authentication
IP http secure server
IP http timeout policy slowed down 60 life 86400 request 10000
overload of IP nat inside source list 100 interface FastEthernet4
!
recording of debug trap
Access-list 100 category SDM_ACL = 2 Note
access-list 100 permit ip 192.168.0.0 0.0.0.255 any
access-list 105 allow ip 192.168.0.0 0.0.0.255 192.168.100.0 0.0.0.255
not run cdp
!
control plan
!
Bridge Protocol ieee 1
1 channel ip bridge
!
Line con 0
no activation of the modem
telnet output transport
line to 0
telnet output transport
line vty 0 4
privilege level 15
transport input telnet ssh
Your configuration is good, but you must do the following:
no access list 100 didn't allow ip 192.168.0.0 0.0.0.255 any
access-list 100 deny ip 192.168.0.0 0.0.0.255 192.168.100.0 0.0.0.255
access-list 100 permit ip 192.168.0.0 0.0.0.255 any
access-list 105 allow ip 192.168.0.0 0.0.0.255 192.168.100.0 0.0.0.255
Please rate if this helps
-
How to put all through traffic the easy vpn client VPN server
Hi people
I want to ask you, how to put all of the server the easy vpn client VPN traffic through.
I mean, I have a server vpn at home, and if I connect to the vpn from outside server, to be with an IP address of my home.
There is the configuration up to now. Where is the problem?
ROUTER1 #sh running-config
Building configuration...
Current configuration: 5744 bytes
!
! Last configuration change at 19:51:18 UTC Wed Sep 4 2013 by cska
!
version 15.1
horodateurs service debug datetime msec
Log service timestamps datetime msec
no password encryption service
!
ROUTER1 hostname
!
boot-start-marker
usbflash0:CVO boot-BOOT Setup. CFG
boot-end-marker
!
!
!
AAA new-model
!
!
AAA authentication login ciscocp_vpn_xauth_ml_1 local
AAA authorization ciscocp_vpn_group_ml_1 LAN
!
!
!
!
!
AAA - the id of the joint session
!
Service-module wlan-ap 0 autonomous bootimage
Crypto pki token removal timeout default 0
!
Crypto pki trustpoint TP-self-signed-1604488384
enrollment selfsigned
name of the object cn = IOS - Self - signed - certificate - 1604488384
revocation checking no
!
!
TP-self-signed-1604488384 crypto pki certificate chain
certificate self-signed 01
3082022B 30820194 02020101 300 D 0609 2A 864886 F70D0101 04050030 A0030201
2 060355 04031326 494F532D 53656 C 66 2 AND 536967 6E65642D 43657274 31312F30
69666963 31363034 34383833 6174652D 3834301E 170 3133 30383239 31313539
32395A 17 0D 323030 31303130 30303030 305A 3031 06035504 03132649 312F302D
4F532D53 5369676E 656C662D 43 65727469 66696361 74652 31 36303434 65642D
38383338 3430819F 300 D 0609 2A 864886 01050003, 818, 0030, 81890281 F70D0101
8100CD 57 F1436ED2 8D9E8B99 B6A76D45 FE56716D D99765A9 1722937C F5603F9F
528E27AF 87A24C3D 276FBA1C A5E7C580 CE99748E 39458C 74 862C 2870 16E29F75
7A7930E1 15FA5644 D7ECF257 BF46C470 A3A17AEB 7AB56194 68BFB803 144B7B10
D3722BDD D1FD5E99 8068B77D A1703059 9F0578C7 F7473811 0421490D 627F25C5
4 HAS 250203 010001A 3 53305130 1 130101 FF040530 030101FF 301F0603 0F060355
551 2304 18301680 141B 1326 C111DF7F 9F4ED888 EFE2999A 4C50CDD8 06 12301
03551D0E 04160414 1B1326C1 11DF7F9F 4ED888EF E2999A4C 50CDD812 300 D 0609
2A 864886 04050003 81810096 BD0C2B16 799DB6EE E2C9B7C4 72FEAAAE F70D0101
FF87465C FB7C5248 CFA08E68 522EA08A 4B18BF15 488D D53D9A43 CB400B54 8006
CB21BDFB AA27DA9C C79310B6 BC594A7E D6EDF81D 0DB7D2C1 9EF7251B 19A 75403
211B1E6B 840FE226 48656E9F 67DB4A93 CE75045B A986F0AD 691EE188 7FB86D3F
E43934FA 3D62EC90 8F37590B 618B0C
quit smoking
IP source-route
!
!
!
!
CISCO dhcp IP pool
import all
network 192.168.1.0 255.255.255.0
DNS-server 195.34.133.21 212.186.211.21
default router 192.168.1.1
!
!
IP cef
No ipv6 cef
!
Authenticated MultiLink bundle-name Panel
license udi pid CISCO892W-AGN-E-K9 sn FCZ1530C209
!
!
username privilege 15 secret 5 cska $1$ $8j6G 2sMHqIxJX8MQU6vpr75gp1
!
!
!
!
!
!
crypto ISAKMP policy 1
BA 3des
preshared authentication
Group 2
!
Configuration group customer isakmp crypto VPNGR
vpngroup key
DNS 212.186.211.21 195.34.133.21
WINS 8.8.8.8
domain chello.at
pool SDM_POOL_1
ACL 120
netmask 255.255.255.0
ISAKMP crypto ciscocp-ike-profile-1 profile
match of group identity VPNGR
client authentication list ciscocp_vpn_xauth_ml_1
ISAKMP authorization list ciscocp_vpn_group_ml_1
client configuration address respond
virtual-model 1
!
!
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
!
Profile of crypto ipsec CiscoCP_Profile1
security association idle time 86400 value
game of transformation-ESP-3DES-SHA
set of isakmp - profile ciscocp-ike-profile-1
!
!
Bridge IRB
!
!
!
!
interface Loopback0
192.168.4.1 IP address 255.255.255.0
IP nat inside
IP virtual-reassembly in
!
interface BRI0
no ip address
encapsulation hdlc
Shutdown
Multidrop ISDN endpoint
!
interface FastEthernet0
!
interface FastEthernet1
!
interface FastEthernet2
!
interface FastEthernet3
!
interface FastEthernet4
!
interface FastEthernet5
!
FastEthernet6 interface
!
interface FastEthernet7
!
interface FastEthernet8
no ip address
Shutdown
automatic duplex
automatic speed
!
type of interface virtual-Template1 tunnel
IP unnumbered Loopback0
ipv4 ipsec tunnel mode
Tunnel CiscoCP_Profile1 ipsec protection profile
!
interface GigabitEthernet0
Description Internet
0023.5a03.b6a5 Mac address
customer_id GigabitEthernet0 dhcp IP address
NAT outside IP
IP virtual-reassembly in
automatic duplex
automatic speed
!
wlan-ap0 interface
description of the Service interface module to manage the embedded AP
192.168.9.2 IP address 255.255.255.0
ARP timeout 0
!
interface GigabitEthernet0 Wlan
Description interface connecting to the AP the switch embedded internal
!
interface Vlan1
no ip address
Bridge-Group 1
Bridge-Group 1 covering-disabled people
!
interface BVI1
IP 192.168.1.1 255.255.255.0
IP nat inside
IP virtual-reassembly in
!
local IP SDM_POOL_1 192.168.4.3 pool 192.168.4.245
IP forward-Protocol ND
!
!
IP http server
local IP http authentication
IP http secure server
overload of IP nat inside source list 110 interface GigabitEthernet0
IP nat inside source static tcp 192.168.1.5 3389 interface GigabitEthernet0 3389
IP nat inside source static udp 192.168.1.5 3389 interface GigabitEthernet0 3389
IP nat inside source static tcp 192.168.1.5 21 interface GigabitEthernet0 21
IP nat inside source static udp 192.168.1.5 21 interface GigabitEthernet0 21
IP nat inside source static tcp 192.168.1.4 3389 interface GigabitEthernet0 3390
IP nat inside source static udp 192.168.1.4 3389 interface GigabitEthernet0 3390
overload of IP nat inside source list 120 interface GigabitEthernet0
IP route 0.0.0.0 0.0.0.0 dhcp
!
exploitation forest esm config
access list 101 ip allow a whole
access-list 110 permit ip 192.168.1.0 0.0.0.255 any
access list 111 permit tcp any any eq 3389
access-list 120 allow ip 192.168.4.0 0.0.0.255 any
!
!
!
!
!
!
!
control plan
!
Bridge Protocol ieee 1
1 channel ip bridge
!
Line con 0
line 2
no activation-character
No exec
preferred no transport
transport of entry all
transport output pad rlogin udptn ssh telnet
line to 0
line vty 0 4
privilege level 15
preferred transport ssh
entry ssh transport
transportation out all
!
Thanks in advance
To do this you must make the following changes:
(1) disable split Tunneling by deleting the ACL of your configuration of the client group.
(2) enable NAT for VPN traffic by adding 'ip nat inside' to your virtual model of the client network to the ACL that controls your PAT.Edit: Theses are the changes to your config (also with a little cleaning):
Configuration group customer isakmp crypto VPNGR
No 120 LCD
!
type of interface virtual-Template1 tunnel
IP nat inside
!
no nat ip inside the source list 120 interface GigabitEthernet0 overload
!
access-list 110 permit ip 192.168.4.0 0.0.0.255 any
no access-list 120 allow ip 192.168.4.0 0.0.0.255 any
Sent by Cisco Support technique iPad App
-
SDM & easy VPN server problem
I'm having a problem setting up an easy VPN server using Cisco Security
Device Manager Version 2. 0a on a router in 1711 with IOS 12.3 (7) XR3.
I have reset the router to the factory defects since the opening screen of SDM.
Connect to 10.10.10.1
User: cisco
Password: Cisco
Start SDM for the initial router configuration dialog box.
Don't use CNS
On basic configuration screen:
Hostname set to router
Domain: test.com
Synchronize time with local PC
Change the user name
New user name: root
password: xyzzy123
password: xyzzy1234
The LAN Interface Setup screen
IP address set to 10.1.1.1
Subnet: 255.255.255.0
Active DHCP server
Start IP: 10.1.1.50
End IP: 10.1.1.70
DNS Configuration screen
Primary: 45.45.45.45
Secondary: 45.45.45.46
Use for DHCP Clients
WAN Configuration screen
Ethernet selected without Encapsulation PPOE
No dynamic (DHCP Client) host name
Advanced options screen
Selected for VLAN1 port address translation
After reading the summary, I chose the FINISH. Asked if dialog box I have
you want to set up a basic firewall, I selected YES. I left all the
secure by default items selected. I clicked FINISH. SDM detected that the
DHCP client on the untrusted external interface and asked if I wanted to
allow DHCP traffic through the firewall. I selected YES. The configuration
has been delivered.
Save the running-config startup-config and reloaded the router.
Released and renewed my ip address and then reconnected in 1711 from new
user name and password. SDM restarted.
Has begun the task of configuration and choose to set up an easy VPN server.
The opening screen had a command prompt to enable AAA. I launched the selected task
After that the AAA commands have been delivered to the router.
I chose the interface FastEthernet0 menu drop-down
IKE proposals - selected default all the
Transform set - selected default all the
Group authorization / policy research - Selected Local only
Add the user name: User1
Password: local1
Encrypt with MD5
Privilege: 2
Group permission/User Group Policies
Add political group: tunnel
Preshared key: sharedkey
Selected new address Pool: 10.1.1.80 to 10.1.1.90
Test after you have configured the selected button.
Exit this screen, there was a warning SDM on the NAT with ACL rules
have to be converted into NAT rules with course maps. I clicked YES to let
SDM convert rules.
Tests successful Easy VPN Server and client screen displays a warning
on the "crypto ipsec df - bit clear' needing to be defined." He was not a
way to put it in SDM and the search function had no success.
I copied the running-config to the startup-config and tested the router from a
connect remotely using a different ISP.
The results:
The SDM monitor shows the client connection, but the client cannot ping
any host on the LAN of the router. No one on the LAN can easy ping of VPN client
Assigned IP of VPN, but they can ping the client using the asigned IP ISP
address.
It seems that SDM not correctly configures the 1711 to route of the
VPN interface to the local network.
I enclose my 1711 Running Configuration generated by SDM.
Hello
I think that the reason why the ping is not successful is that your LAN IP address (connected to the VLAN interface) and the pool of IP addresses assigned to the client are in the same network.
You can try assigning a pool of IP addresses for VPn clients that is in another subnet (say 10.1.2.80 to 10.1.2.90) and then try to ping?
You can change the pool by means of configure-> additional tasks-> local swimming pools.
You can then disconnect the client on the Monitoring page and connect again.
Kind regards
Ravikumar
-
Help with the easy VPN server with LDAP
Hello
I used to be able to set up our easy VPN server with local authentication.
But now, I'm trying to use LDAP authentication to match with our policies.
Can someone help me please to check the config and tell me what is wrong with him?
My router is a Cisco1941/K9.
Thank you in advance.
Ryan
Current configuration: 5128 bytes
!
! Last configuration change at 13:25:16 UTC Tuesday, August 28, 2012, by admin
! NVRAM config update at 05:03:14 UTC Monday, August 27, 2012, by admin
! NVRAM config update at 05:03:14 UTC Monday, August 27, 2012, by admin
version 15.2
horodateurs service debug datetime msec
Log service timestamps datetime msec
no password encryption service
!
router host name
!
boot-start-marker
boot-end-marker
!
!
!
AAA new-model
!
!
AAA group ASIA-LDAP ldap server
Server server1.domain.net
!
AAA authentication login ciscocp_vpn_xauth_ml_1 local
AAA authentication login ASIA-LDAP-AUTHENTIC ldap group ASIA-LDAP
local VPN_Cisco AAA authorization network
Group ldap AAA authorization network ASIA-LDAP-ASIA-LDAP group authorization
!
!
!
!
!
AAA - the id of the joint session
!
!
No ipv6 cef
!
!
!
!
!
IP domain name domaine.net
IP cef
!
Authenticated MultiLink bundle-name Panel
!
Crypto pki token removal timeout default 0
!
Crypto pki trustpoint TP-self-signed-765105936
enrollment selfsigned
name of the object cn = IOS - Self - signed - certificate - 765105936
revocation checking no
rsakeypair TP-self-signed-765105936
!
!
TP-self-signed-765105936 crypto pki certificate chain
certificate self-signed 01
30820229 30820192 A0030201 02020101 300 D 0609 2A 864886 F70D0101 05050030
2 060355 04031325 494F532D 53656 C 66 2 AND 536967 6E65642D 43657274 30312E30
69666963 37363531 30353933 36301E17 313230 36323630 39323033 0D 6174652D
355A170D 2E302C06 1325494F 03550403 32303031 30313030 30303030 5A 303031
532D 5365 6C662D53 69676E65 642D 4365 72746966 69636174 652 3736 35313035
06092A 86 4886F70D 01010105 39333630 819F300D 00308189 02818100 0003818D
C1B7E661 4893D83A EFE44B76 92BAA71A 6375 854 C 88 D 4533E51A 49791 551D8EF7
F82E2432 E65B401D 27FE4896 2105B38A CB1908C1 9AE2FC19 8A9393C3 1 B 618390
EE6CB1CC 5C8B8811 04FA198E 16F3297B 6B15F974 13EE4897 97270547 31 74270
4590ACA6 68606596 97C5D4D5 462CACA0 CDDAC35A 17415302 CFD4E329 8E7E542D
02030100 01A 35330 03551 D 13 51300F06 0101FF04 05300301 01FF301F 0603551D
23041830 1680142E FF686472 569BCCF1 552B 1200 1 060355 5B660F30 D35060DB
1D0E0416 04142EFF 9BCCF155 68647256 2B1200D3 5060DB5B 660F300D 06092 HAS 86
01010505 00038181 00558F64 05207 D 35 AA4BD086 4579ACF6 BCF6A851 4886F70D
1D0EA15B 75DBFA45 E01FBA5C 6F827C42 1A50DD11 8922F1E5 3384B8D8 8DD6C222
0187E501 82C1C557 8AD3445C A4450241 75D771CF 3A6428A6 7E1FC7E5 8B418E65
74D265DD 06251C7D 6EF39CE9 3 D FE03F795 692763 AE865885 CFF660A5 4C1FF603
3AF09B1E 243EA5ED 7E4C30B9 3A
quit smoking
license udi pid CISCO1941/K9 sn xxxxxxxxxxxISM HW-module 0
!
!
!
secret admin user name of privilege 15 5 $1 rVI4$ WIP5x6at0b1Vot5LbdlGN.
ryan privilege 0 0 pass1234 password username
!
redundancy
!
!
!
!
!
!
!
crypto ISAKMP policy 1
BA 3des
preshared authentication
Group 2
!
Configuration group customer isakmp crypto VPN_Group1
xxxxxxxxxxxx key
DNS 10.127.8.20
pool SDM_POOL_1
ACL 100
netmask 255.255.255.0
ISAKMP crypto ciscocp-ike-profile-1 profile
match of group identity VPN_Group1
authentication of LDAP-ASIA-AUTHENTIC customer list
whitelist ISAKMP ASIA-LDAP-authorization of THE
client configuration address respond
virtual-model 1
!
!
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
!
Profile of crypto ipsec CiscoCP_Profile1
game of transformation-ESP-3DES-SHA
set of isakmp - profile ciscocp-ike-profile-1
!
!
!
!
!
!
!
interface Loopback0
IP 10.127.15.1 255.255.255.0
!
the Embedded-Service-Engine0/0 interface
no ip address
Shutdown
!
interface GigabitEthernet0/0
IP xxx.xxx.xxx.xxx 255.255.255.224
automatic duplex
automatic speed
!
interface GigabitEthernet0/1
IP 10.127.31.26 255.255.255.252
automatic duplex
automatic speed
!
type of interface virtual-Template1 tunnel
IP unnumbered Loopback0
ipv4 ipsec tunnel mode
Tunnel CiscoCP_Profile1 ipsec protection profile
!
local IP SDM_POOL_1 10.127.20.129 pool 10.127.20.254
IP forward-Protocol ND
!
IP http server
local IP http authentication
IP http secure server
IP http timeout policy slowed down 60 life 86400 request 10000
!
IP route 0.0.0.0 0.0.0.0 GigabitEthernet0/0
IP route 10.0.0.0 255.0.0.0 10.127.31.25
IP route 10.127.20.128 255.255.255.128 GigabitEthernet0/0
!
Note access-list 100 category CCP_ACL = 4
access-list 100 permit ip 10.0.0.0 0.255.255.255 everything
!
!
!
!
!
!
!
LDAP attribute-map ASIA-username-map
user name of card type sAMAccountName
!
Server1.domain.NET LDAP server
IPv4 10.127.8.20
map attribute username-ASIA-map
bind authenticates root-dn CN = xxx\, S1234567, OU = Service accounts, OR = Admin, OU = Acc
DC = domain, DC = net password password1
base-dn DC = domain, DC = net
bind authentication-first
!
!
control plan
!
!
!
Line con 0
line to 0
line 2
no activation-character
No exec
preferred no transport
transport of entry all
output transport lat pad rlogin lapb - your MOP v120 udptn ssh telnet
StopBits 1
line 67
no activation-character
No exec
preferred no transport
transport of entry all
output transport lat pad rlogin lapb - your MOP v120 udptn ssh telnet
StopBits 1
line vty 0 4
transport telnet entry
!
Scheduler allocate 20000 1000
endRouter #.
Ryan,
It seems that you are facing the question where it is indicated in the section:
Problems with the help of "authentication bind first" with user-defined attribute maps:
* Then you are likely to see a failure in your authentication attempt. You will see the error message "Invalid credentials, result code = 49. The newspapers will look something like the journals below: *.
Which is the same error you see. Go ahead and replace in your attribute map and test again.
If you remove the command "bind-first authentication' configuration above, everything will work correctly.
https://supportforums.Cisco.com/docs/doc-17780
Tarik Admani
* Please note the useful messages *. -
Unable to connect to the VPN server
Hello
I'm on Sierra, iOS macOS 10 and Mac OS Server 5.2 (on a Mac mini). (All dated September 21, 2016)
Because PPTP is no longer supported, I am trying to create L2TP. Unfortunately, when I try to connect to the server, I get the error "the VPN server has failed. Please check the server address and try to reconnect. »
I do not think it is a problem of networking: back to my Mac is not enabled, the appropriate ports are transmission (UDP 500, 1701, 4500) and server says that the service is accessible.
When I check the logs from the server after a connection attempt, I find:
21/09/16 21:08:09.994 raccoon [75993]: can't find configuration.
21/09/16 21:08:13.285 raccoon [75993]: can't find configuration.
21/09/16 21:08:16.578 raccoon [75993]: can't find configuration.
21/09/16 21:08:19.884 raccoon [75993]: can't find configuration.
Any suggestions?
Does anyone know where the configuration file is supposed to be on the server, so I can look at?
Thanks for your help!
Hi Rick,
-Check that the folder/etc/racoon exist and the folder contains psk.txt and racoon.conf.
-Installed with the operating system.
Cheers, dwbrecovery
-
I use the VPN server through Server 5.1. However, I recently bought an EdgeRouter POE, and I plan to change to its VPN. Can someone offer advantages/disadvantages for one against the other?
Thank you
Jeff
I have no experience using the EdgeRouter and it took quite some dig able to determine that this was the case to all VPN. It seems mainly focused on being a router Ethernet to Ethernet. However as mentioned, I finally found a reference, which suggests he can do the following VPN protocols.
- IPSec Site to Site and remote access
- OpenVPN Site‐to‐Site and remote access
- RAS PPTP
- Remote access L2TP
- PPTP client
Download and read the whole manual I don't remember not its VPN features.
I can say that I gave up on VPN server own Apple as it supports only L2TP and PPTP that these two days are considered to be weak from a security point of view and which can be used for VPN on demand configurations. I now use StrongSwan5 which allows to make a Linux server
- IKEv2 Site to Site and remote access
- IPSec Site to Site and remote access
Both being able to VPN on demand.
IKEv2 is currently considered the most secure VPN solution. IKEv2 is supported the use of VPN client built into El Capitan and iOS 9.
StrongSwan5 works with the built-in VPN Apple customer and StrongSwan5 supports the use of SSL certificates, it also supports force all traffic through the VPN - a common requirement of companies configuration VPN connection.
-
Unable to connect to the Internet after connecting to a VPN server.
As soon as I connect to the VPN, I can't access the Web or e-mail.
An article published by Microsoft Support to http://support.microsoft.com/kb/317025 seems to refer to the same problem. However, it is for Win 2000 and NT platforms, not XP. The problem seems to be due to the VPN connection (being configured) to use the default gateway on the remote network.
Issues related to the:
- The problem indeed because the VPN connection is configured to use the default gateway on the remote network?
- If so, a) how can I know if it's like my VPN connection is configured and b) how I set up so I can use VPN to the network remotely and still being able to use internet locally?
Thank you.
Realize that the VPN is intended to establish a secure connection to a remote network via a public internet. Allowing a client computer at the same time secure access that a secure network and a public network may pose a risk to data leaks out of the network security in the public internet. If "split tunneling" VPN server controls is allowed on a client computer. If allowed by the side of the VPN server, the client computer accesses the VPN and the internet by unchecking the 'use Gateway on the remote network' box. For more information:
"Split Tunneling for concurrent access to the Internet and an Intranet"
<>http://TechNet.Microsoft.com/en-us/library/bb878117.aspx >HTH,
JW -
Hello
Do you know if it is possible to use routers soho to accept incoming vpn tunnels, initiated by PC with "Cisco VPN Client"?
Thank you
Nuno
The navigation feature (http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp) will help you here.
Search by function, function is 'Easy VPN Server'. This will tell you what HW platforms and what code you need for them. You can use the navigation to all the features of IOS, very practical feature.
-
Access to the internal mail (Exchange) by centimeters remote VPN server
Hi all
I have a problem in the configuration of ASA 5510 to access my internal mail (Exchange) through remote access VPN server
one... I have set up my D-Link ADSL router to port before the SMPTP (25) & POP3 (110) to the external interface of ASA 5510 (192.168.5.101 255.255.255.0)
b. How can I configure ASA 5510 (using ASDM) to portforward (SMTP POP3 110 25) to my internal mail server with IP 192.168.50.2 255.255.255.0
c. my internal LAN network (192.168.50.0 255.255.255.0) is coordinated at 10.1.1.0 255.255.255.224 for vpn clients
d. my IP of mail server (192.168.50.2 255.255.255.0) will also be translated while clients are accessing content through remote VPN access
e.What IP (Exchange of IP of the server (192.168.50.2) do I have to set up in Microsoft Outlook (incoming & outgoing mail server), vpn clients receive using a NAT IP 10.1.1.10
Here's my configuration details of access remote vpn
: Saved
: Written by enable_15 at 13:42:51.243 UTC Thursday, November 27, 2008
!
ASA Version 7.0 (6)
!
hostname xxxx
domain xxxx
enable the encrypted password xxxxx
XXXXX encrypted passwd
names of
DNS-guard
!
interface Ethernet0/0
nameif outside
security-level 0
IP 192.168.5.101 255.255.255.0
!
interface Ethernet0/1
nameif inside
security-level 100
IP 192.168.50.101 255.255.255.0
!
interface Ethernet0/2
Shutdown
No nameif
no level of security
!
interface Management0/0
nameif management
security-level 100
management only
IP 192.168.1.1 255.255.255.0
!
passive FTP mode
list of access inside the _nat0_outbound extended permits all ip 10.1.1.0 255.255.255.224
allow a standard vpn access list
outside_cryptomap_dyn_20 list of allowed ip extended access any 10.1.1.0 255.255.255.224
vpn-ip-pool 10.1.1.10 mask - 255.255.255.0 IP local pool 10.1.1.25
Global interface 10 (external)
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 10 0.0.0.0 0.0.0.0
Route outside 0.0.0.0 0.0.0.0 192.168.5.1 (D-Link ADSL router LAN IP) 1
internal vpn group policy
attributes of vpn group policy
Split-tunnel-policy excludespecified
Split-tunnel-network-list value vpn
WebVPN
xxxxx xxxx of encrypted password privilege 0 username
attributes of username xxxxx
Strategy-Group-VPN vpn
WebVPN
ASDM image disk0: / asdm - 508.bin
don't allow no asdm history
ARP timeout 14400
Enable http server
http 192.168.1.0 255.255.255.0 management
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set ESP-3DES-SHA edes-esp esp-sha-hmac
Crypto-map dynamic outside_dyn_map 20 the value transform-set ESP-3DES-SHA
card outside_map 655535-isakmp ipsec crypto dynamic outside_dyn_map
outside_map interface card crypto outside
ISAKMP allows outside
part of pre authentication ISAKMP policy 10
ISAKMP policy 10 3des encryption
ISAKMP policy 10 sha hash
10 2 ISAKMP policy group
ISAKMP life duration strategy 10 86400
tunnel vpn ipsec-ra group type
VPN tunnel-group general attributes
ip vpn-pool address pool
Group Policy - by default-vpn
Tunnel vpn ipsec-attributes group
pre-shared-key *.
Telnet timeout 5
SSH timeout 5
Console timeout 0
management of 192.168.1.2 - dhcpd address 192.168.1.254
dhcpd lease 3600
dhcpd ping_timeout 50
enable dhcpd management
!
Policy-map global_policy
class inspection_default
inspect the dns-length maximum 512
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
!
global service-policy global_policy
: end
So can someone help me, how can I configure these tasks
You can without problem
-
Hello
I try to configure my router ADSL cisco 877 as a vpn server, so that multiple site can connect to the ADSL cisco 877 router. Is it possible to achieve this goal. If yes what is the procedure and if possible, please copy the URL for documentation here.
Thank you
Siva.
Here is the sample configuration for the client in network Extension mode and IOS Easy VPN server:
http://www.Cisco.com/en/us/Tech/tk583/TK372/technologies_configuration_example09186a0080808395.shtml
The sample configuration uses local authentication, you can always change it to use radius authentication.
-
Hello
I am trying to create an easy VPN server on Cisco 831. When I "test" the easy VPN he said that it tested successfully, but when I try to VPN in the router of the built in Windows XP VPN client, I'm unable to connect.
Does anyone have recommendations for how to configure easy VPN? I basically just selected all the default options. I was not able to find tutorials in the Cisco online documentation.
Do I need to have the Cisco VPN client to connect to the Cisco router?
Other thoughts?
Your IP address pool you are trying to assign to remote users is part of your local network, which is not the best way to assign the ip address to the VPN Clients, and I've seen a lot of problems in the past were route it not forwards the packets to the client. This allows you to change the POOL of something other than your LAN. E.g. 192.168.1.0/24.
Also, make sure that you re - configure your 102 ACL accordingly.
Once you make changes, try to connect again and let me know how it goes.
Kind regards
Arul
* Please note all useful messages *.
-
PlayBook & cisco Easy VPN Server 831
I don't seem to be able to connect to my router 831 cisco easy vpn server is configured by using my Blackberry Playbook. Looking at the console of the router I can see Debugging but don't know what it means. I have attached debugging as well as glued my setup, if someone is able to help me at all it would be much appreciated. Thank you very much.
Current configuration: 2574 bytes
!
version 12.3
no service button
horodateurs service debug datetime msec
Log service timestamps datetime msec
no password encryption service
!
router host name
!
enable secret 5 $1$ FM71$ y4ejS2icnqX79b9gD92E81
enable password xxxx
!
username privilege 15 password 0 $1$ W1fA CRWS_Ritesh $ o1oSEpa163775446
username privilege 15 secret 5 shamilton wFLF $1$ $ 8eRxnrrgVHMXXC0bXdEGi1
AAA new-model
!
!
AAA authentication login default local
AAA authentication login ciscocp_vpn_xauth_ml_1 local
AAA authorization exec default local
AAA authorization ciscocp_vpn_group_ml_1 LAN
AAA - the id of the joint session
IP subnet zero
no ip Routing
!
!
audit of IP notify Journal
Max-events of po verification IP 100
No ftp server enable write
!
!
!
!
crypto ISAKMP policy 1
BA 3des
preshared authentication
Group 2
ISAKMP xauth timeout 15 crypto!
ISAKMP crypto client configuration group ciscogroup
(deleted) 0 key
DNS 172.16.60.246 172.16.60.237
pool SDM_POOL_3
ACL 100
Save-password
include-local-lan
!
!
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
!
crypto dynamic-map SDM_DYNMAP_1 1
game of transformation-ESP-3DES-SHA
market arriere-route
!
!
card crypto SDM_CMAP_1 client authentication list ciscocp_vpn_xauth_ml_1
map SDM_CMAP_1 isakmp authorization list ciscocp_vpn_group_ml_1 crypto
client configuration address map SDM_CMAP_1 crypto answer
map SDM_CMAP_1 65535-isakmp dynamic SDM_DYNMAP_1 ipsec crypto
!
!
!
!
interface Ethernet0
IP 172.16.60.241 255.255.255.0
IP nat inside
no ip route cache
!
interface Ethernet1
DHCP IP address
NAT outside IP
no ip route cache
automatic duplex
map SDM_CMAP_1 crypto
!
interface FastEthernet1
no ip address
Shutdown
automatic duplex
automatic speed
!
interface FastEthernet2
no ip address
Shutdown
automatic duplex
automatic speed
!
interface FastEthernet3
no ip address
Shutdown
automatic duplex
automatic speed
!
interface FastEthernet4
no ip address
automatic duplex
automatic speed
!
local IP SDM_POOL_1 172.16.60.190 pool 172.16.60.199
pool of local SDM_POOL_2 192.168.1.1 IP 192.168.1.100
local IP SDM_POOL_3 172.16.61.100 pool 172.16.61.150
IP nat inside source overload map route SDM_RMAP_1 interface Ethernet1
IP classless
!
IP http server
no ip http secure server
!
Remark SDM_ACL category of access list 1 = 2
access-list 1 permit 172.16.60.0 0.0.0.255
Note access-list 100 category CCP_ACL = 4
access-list 100 permit ip 172.16.60.0 0.0.0.255 any
public RO SNMP-server community
Enable SNMP-Server intercepts ATS
!
Line con 0
no activation of the modem
line to 0
line vty 0 4
exec-timeout 120 0
password xxxxx
length 0
!
max-task-time 5000 Planner
!
endStace,
*Mar 1 06:40:15.258: ISAKMP: transform 1, ESP_AES
*Mar 1 06:40:15.258: ISAKMP: attributes in transform:
*Mar 1 06:40:15.262: ISAKMP: SA life type in seconds
*Mar 1 06:40:15.262: ISAKMP: SA life duration (basic) of 10800
*Mar 1 06:40:15.262: ISAKMP: encaps is 61443
*Mar 1 06:40:15.262: ISAKMP: key length is 256
*Mar 1 06:40:15.262: ISAKMP: authenticator is HMAC-SHA
*Mar 1 06:40:15.262: ISAKMP (0:14): atts are acceptable.
*Mar 1 06:40:15.262: ISAKMP (0:14): IPSec policy invalidated proposal
*Mar 1 06:40:15.262: ISAKMP (0:14): phase 2 SA policy not acceptable! (local 14
The other end offers AES 256 and SHA IPSec transform set.
While you have configured:
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
Suggestion:
Add a new set of transofrm and apply it under crypto map.
HTH,
Marcin
Maybe you are looking for
-
recovery iPhone 6s + not recognized mode on iTunes
I had recently an iPhone 6s over someone and when I tried to put it into recovery mode to put in shape, I got an error (23, 14, I think.) Subsequently, the phone has been blocked in Recovery mode and cannot be updated. Now, it is not yet recognized b
-
Accidentally closed down the pc and firefox did not return with option restore previous session in the first screen even in history-Restory previous session is gray. My settings are own history after closing firefox.Y at - it no change to return on m
-
Satellite Pro L300 shows ACPI ATK0100 Kernel Mode Driver error
I have a Satellite Pro L300 with Windows Vista and it has been fickle to say the least, making me restart the system several times.The last two times she since continued to come up with an error message saying "cannot open ACPI ATK0100 Kernel Mode Dr
-
When I stopped my system sure FF4 does not give me the option to save my tabs and restore restart.
-
How to Configure ListView-> ListItemComponent-> the opactiy of the container to 0.0?
Hi all How do you RESET ListView opacity to 0.0? I have a ListView with 5 elements. I want to adjust the opacity on the selected element. For example: -. When I click on item # 1, opacity will increase from 0.0 to 0.5. And when I clicked on the point