2960 - S FlexStack - stack integration issue?

Similar Questions

• OAM and Oracle Portal integration issue

  I have Oracle portal (OAS 10.2.0.3) installed and it worked fine with OAS SSO. I was able to log users in Oracle Internet DIrectory. I also installed Oracle Access manager (10.1.4.0) with Oracle Internet directory. Then I followed Oracle for example "integrating Oracle Access Manager with Oracle signs on and Oracle Portal" (http://www.oracle.com/technology/obe/fusion_middleware/im1014/oam-osso-portal/oam-osso-portal.htm) to integrate the OAM and Oracle Portal.
  
  In the last step, after I typed http:// < server.domain >: 7778/pls/portal and click on the login link, I saw the box of challenge based on LDAP (which was good). But after that I have provided the user name and an OID userand password clicked OK, the portal page has not changed at all. It seemed that I logged in, but I couldn't see Builder or portal, or the logout link admin tab. So I couldn't even log on the portal because the logout link was not displayed.
  
  could someone help me on this issue?
  
  Thank you
  Georges Nicks

  Hi Georges Nicks.

  I think that the OSSO plugin does not receive user name information correctly. You can add debugging statements in the SSOOblixAuth.java and recompile / redeploy to see if the value is received.

  In addition, the OBE article directs you to add the attribute back to ossouser (with the uid of the user as a value) on the success of the authentication. Can you try to add the same action Expression of authorization on the success of default permission?

  -Vinod

• VSS of LabVIEW integration issue

  Hello

  I'm trying to simulate jointly VSS and Labview by running a simple example of the AWRDE example file. I get the error message that I need license of integration (see the attached screenshot) in order to use the LabVIEW block in VSS. I'm under LabVIEW 2013 Professional Edition and have the next version of AWR:

  10.02R build 5983 Rev (78833). I have Windows 7 on my computer.

  Can someone please tell me what is license integration and how to get it. We have the license for LabVIEW, as well as software AWRDE. Thank you.

  Kind regards

  Kathar

  Hi, Kathar, the best way to fix this is to upgrade to AWRDE v11.01 (available from the download link at www.awrcorp.com).

• Mathematical integration issue

  Hi all

  Here's a VI I'm working... it's a Powermeter instrument that measures power through photodiode sensors. The unit is used to measure the power to 1 wavelength. I did the VI for example a range of whole wavelengths, with some time and that integrate all the values of the measured power. This way I can include the component wavelengts visible in the final value of the power measured.

  However, when measuring, after integration, I get different values depending on the stage of sampling. This may not be true, since I'm able to the same wavelength understood and changing step (measures for each 10 or 50 nanometers) should not affect the final result. I think the problem is in the method of integration. A person with knowledge of mathematical integration, or the integration of screws in the version complete LabVIEW? Can anyone suggest me perhaps another VI integration? Or maybe another method. I'll be very grateful!

  Best regards

  G.

  The simplest method of numerical integration is the rectangle rule. The following figure should explain it.

  

  In your case, 'h' is the stage of sampling (in nanometers), as well as the input dt.

  If you have a point each 10 nm and f (x) = 2 constant function. The area of a rectangle is so 10 * 2 = 20. Your dt should also be 10. However, if you set the dt to 0.1, the formula calculates 0, 1 * 2 = 0, 2, which is a false result. To get the correct value, you would need to have a sample of each 0.1 nanometers, so on a 10 nm range the area would be 0, 1 * 2 * 100 = 20. Another way keep the sampling on 10 nm and by multiplying the value of f (x) of 10/0, 1 = 100, so that there is 0, 1 * 200 = 20.

  If you are unsure, simply generate a const waveform and play with the settings. It is easy to determine the constant elementary functionst integral and on the other, such as the sine or cosine. If you manage to get the correct value on these features, you should be able to use the same settings on your signals custom, because she has the same stage of the sample.

  I hope it's clearer now

  Kind regards

  Adam

• SF500 and stacking SG500 issues

  I have difficulties to find specific answers to the items on the 500 series, so I thought it's maybe good to ask here.

  (1) is the port of stacking for the Sx500 series in the front or the back?

  (2) what is the speed of the stacking port?

  (3) can you build an etherchannel on the whole of the battery (using a port of each switch?)

  Hi Deschete,

  (1) the port of stacking for the Sx500 series is in front.

  (2) the battery port speed is 1 G, to learn more about the speed of the ports refer to the corresponding devices data sheet.

  (3) Yes, you can build etherchannel on the whole of the battery.

  For more details check out the following link

  Battery settings Sx500 stackable switches

  Thank you

  Naresh Daniel

• ACS 5.3 AD integration issues

  Hi all

  We have two devices ACS 5.3 in mode synchro with some local users, groups, devices, etc. I need to join the ACS service to Active Directory. I have a few questions, you can help me please?

  (1) we have a Parent domain and three child domians, I need customer of all areas of three children to be able to authenticate on ACS, should I become a member of the ACS in the parent domain, or is it possible to connect a GBA to three child domains?

  (2) will join ACS announcement affect the current configuration (local), somehow local users will lose access to certain devices or devices will disappear? What is a safe procedure?

  (3) another small question, I can access the WEB user interface, but can't SSH (putty) by using the same credentials, I'm doing something wrong?

  Thank you!

  1) join the parent domain and you can authenticate you of parent and child.

  -The parent and the child have default two-way trust, which is what is needed.

  (2) No, and that's for sure.

  (3) SSH creds differ from those of the web GUI.

  This is usually set when you install the ACS software.

  If you have forgotten it, perform a recovery password by using the DVD.

  Rate if useful :)

  Knowledge sharing makes you immortal.

  Kind regards

  Ed

• ISE AD integration issues

  G ' Day all,

  I'm trying to ad my node primary admin to RFA, but I am receving the following error message in the ISE graphical user interface.

  using the writable domain controller: addc01.abc.com

  Computer update DnsName failed.

  The user doesn't have privileges to update the DNSHostName attribute.

  Error: Either user [email protected] / * / do not have enough permissions to be

  Domain Abc.com, Zone Null

  Or this computer already has an account in the domain.

  To join, you must have domain administrator privileges.

  Join to the domain Abc.com, Null area has no

  The detailed test passes fine. I do not see errors NTP and DNS is completely resolved at both ends.

  Any help is greatly appreciated guys.

  James

  I had a similar problem.

  I received the following error message:

  The domain controller using: paprowdc.domain.corp writable = true
  Computer update dnsName failed.
  The user doesn't have privileges to update the dNSHostName attribute.

  Error: Either user [email protected] / * / doesn't have sufficient permissions to join
  field domain.corp, null zone
  or this computer already has an account in the domain.
  To join, you must have domain administrator privileges.

  Domain join 'domain.corp', 'null' area failed.

  The problem has been resolved, adding the privilege to add machine object on the announcement to the user_ad user.

  Kind regards

• Void / navigation Menu / integration issue of the e-commerce of the BC, please help!

  Hello

  sarahcosmetics.com is an e-commerce site, that I've developed by muse and British Colombia.

  I sectioned off sub categories form of pages which make correctly however my client recently asked me to add a submenu for navigating these pages at the top of the site.

  I currently have a link to the following pages: "Lips" 'eyes' and 'face' through hypertext links which I have incorporated into my muse projects 'page' products I was able to locate the appropriate links to my store via BC categories after setting up the shopping cart.

  It was to find work but my clients asked me to incorporate a dropdown under linking products to, 'Lips' "eyes" and "deal with" via the navigation menu.

  I thought it would be child's play I use a widget of grid of muse for the navigation menu that works very well on the other sites, however in this case, when I publish it links to these pages, it connects to my muse model pages for "Lips" 'eyes' and 'face' (who seem to have a different hyperlink) so no products are returned.

  I'm really need help to know what the difference is and how to get around this problem to properly set up the sub menu of navigation.

  Currently, the hypertext links this page works fine, http://www.sarahcosmetics.com/products.html

  So I guess you deleted the navigation sub under products menu.

  Includes pages 'Lips', 'Eyes' and 'Face' {tag_pagecontent} then they will appear under models when the site is published in British Colombia. In case you use the content of the tag, try to remove and insert content directly on the pages and then include in menu to main menu navigation link, it should work.

  If you still need help, then I suggest you to publish the site as a place to test new with all the links of the menu SUP to the title of the item in main menu of products, so that we can check on our end.

  Thank you

  Sanjit

• Navigation glossary integration issues

  Here's my situation. I'm building a course in version 5.5. I have a slide opening and then a glossary placed as slide 2 slide. This slide should be accessible when the user clicks a button on the glossary on each slide. A back on the Glossary button will return to the previous slide visited users. I am also using the standard playback bar. I need to keep the glossary blade hidden until users click the button of the glossary. As it is now, the slide is visible when moving forwards and backwards using the playback bar. What is the best way to keep the hidden during the navigation slide? I'm not very familiar with advanced actions and am very new to using the program. Thank you.

  Here is a brief overview of what you need to do:

  1. Create a variable named, say, varAllowGlossaryand set its initial value to 0. (Use of the project > Variables menu to create the variable).
  2. Create a conditional advanced action named, say, SkipOrShowGlossary to run this logic:
     • If varAllowGlossary is 0, go to the next slide, ELSE continue
  3. Set the action 'on input"of your glossary to Execute advanced Actions of slide > SkipOrShowGlossary
  4. Define the action of "On the exit" of your slide Glossary to assign varAllowGlossary to 0 (although this action will not be executed if the user click the back button on the slide instead).
  5. Create a standard tip Action named, say, ReturnFromGlossary, with two actions as follows:
     
     • Assign the varAllowGlossary with 0
     • Go to last visited slide
       
  6. Set ReturnFromGlossary as the action of 'Success' of the BACKSPACE on the slide of glossary.
     
  7. Create an advanced standard action named, say, GoToGlossary with two actions as follows:
     • Assign the varAllowGlossary with 1
     • Go to slide {your slide glossary}
       
  8. Set GoToGlossary as the action of 'Success' of any button that is intended to keep the user in the glossary.

  Hope that helps!

  Trevor

• Satellite L555 - 10 M: blue screens in Windows, the system very hot, very noisy fan

  Hello

  Since yesterday my laptop shows a few Windows blue screens with the following values:
  (no value or empty)
  PAGE_FAULT_IN_NONPAGED_AREA
  PFN_LIST_CORRUPT.

  Some auto repairs were performed by start-Help/Systemstartreparation.

  After restarting the system in securitymodus and anti-virus disabled
  the following checks were made:

  (a) chkdsk c:
  The file system have been checked and no problem not found.

  (b) sfc/scannow
  Windows-Resourceprotection found no integrity issues.

  The system works only in time and
  After a few minutes, the laptop will be very hot and the fan works very hard
  the judgment of the work system,
  the mouse stop working,
  There is no activity on the disk system c
  the system shows reactions
  Finally appears with PFN_LIST_CORRUPT blue screen.

  Could you please help?
  Thank you.

  What did you do with your machine? do you have additional software installed or upgraded something?

• Blackberry10 Webworks / Extension Native Bug (?)

  Someone at - he saw Simulator messages like:

  Need error can not find

  /usr/bib/WebPlatform/plugins/mjnext/BP.so

  Library not found

  When starting an application of webworks html5 with a native extension.

  Although I see this error,

  (1) I know that my archives of deployment (file * .bar) take my shared library because I can see it in the archives under

  Expected, as well as an auth.txt file /native/plugins/jnext/BP.so

  (2) I know that the deployment of the process in many because I can copy the library $SDK_DIR/Framework/ext/bbm.platform/simulator/bbm.so to replace my library bp.so (also in a subdirectory of the framework/ext), do a regeneration and deploy. Then start my application, I get a message that bp. Memory cannot be instantiated. Which is fine, telling me that my index.js file loads the false bp.so (good) but can't call the class of memory (planned, as there was no in bbm.so before the copy).

  (3) I know that my C++ code is very well I have an exact copy of the code in the extension of the C++ TEMPLATE (memory) example I downloaded from github.

  (4) I believe that the shared library is very good because it built without problems in the IDE, downloaded from the section C++ tools to developers. (I'm using the version of Linux and construction with the default device-debug settings).

  But, then, there must be something wrong with the library because the system cannot load from the/native/plugins/jnext directory in the application folder. So at the moment I suspect that there is an integration issue somewhere between the different tools in question, the IDE, SDK, the Simulator.

  Has anyone else had luck with native extensions for BB10 html5 webworks apps?

  I had a little more time to play with this morning and have been able to track down what happens then...

  For other developers who run in it. This happens because profiles of device-Debug or Release device in the IDE to produce an ELF 32-bit ARM shared libraries, while produce profiles Simulator-Debug or Release - Simulator ELF 32-bit Intel 80368 shared libraries. Deponding on the target is important so get the suitable library.

  For RIM, you have a somewhat integrated tool chain and I understand the limits you are underneath. On the other hand, I had to spend time reverse engineering that toolchain to understand how it works. This reverse engineering work is not something that you'll usually want to push downstream. In addition, this thread is the one but not the first question of usability I meet with your tools. As a professional developer, waste of time on usability issues is very difficult to charge (-c' IE: do not cost effective to develop for) is not pleasant (-c' IE: it rots the brain). So, knowing that I would probably not do the work in the future development of BB-related...

  In my view, is a fair estimate of RIM where in terms of experience of development - not comparable to those of your competitors. I hope this can change, because it is really in the best interest of all that the RIM is a successful part of the mobile market.

• Windows could not start the service Windows search on the computer Local (Error 1053)

  Windows Search does not work on the start menu, nor IE8 remembers the URL history more.

  I tried the procedure described in this post (does not work): http://social.answers.microsoft.com/Forums/en-US/w7files/thread/8d68d244-afca-4006-a6eb-57d4dd9d58df

  I ran a scan sfc, who has not returned this any integrity issues have been detected.  I also tried to disable the Windows search feature to "Turn Windows features on or off", rebooted and tried reactivation, without success.

  I tried to create a new profile, but the same problem occurred.  I discovered that WSearch service does not work.  When I try to enable it, I get the following error:

  ---------------------------
  Services
  ---------------------------
  Windows could not start the Windows Search service on Local computer.

  Error 1053: The service did not demand launch or control in a timely

  I did some searching on the forum, but I was unable to find a solution to this problem.  Any help would be greatly appreciated.

  Yep, http://www41.zippyshare.com/v/30503880/file.html

  Unzip it, and then apply this Difficulty REG. Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

• Bugcheck code: 0x1E (0xFFFFFFFFC0000005, 0xFFFFF800030FB150, 0x0, 0xFFFFFFFFFFFFFFFF)

  My computer is still a lot of corrupted files and probably needs a new hard drive but I would like to know what this BSOD was caused by and if I might need to buy new parts, other than a new HARD drive

  https://onedrive.live.com/redir?RESID=19C73F339A06B0C9! 108 & authkey =! AMh4ubZLZ_oFWbE&ithint=file%2c.dmp is the minidump

  using WhoCrashed gave me the following:

  Wednesday, July 9, 2014 12:08:49 AM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\070814-25724-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x75BC0)
  Bugcheck code: 0x1E (0xFFFFFFFFC0000005, 0xFFFFF800030FB150, 0x0, 0xFFFFFFFFFFFFFFFF)
  Error: "KMODE_EXCEPTION_NOT_HANDLED"
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that a kernel-mode program generated an exception which did not catch the error handler.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Hello

  What is causing file corruption could be the cause of the BSOD and vice versa.

  Bugcheck 1E, {ffffffffc0000005, fffff800030fb150, 0, ffffffffffffffff}

  Probably caused by: memory_corruption (nt! MiReplenishPageSlist + c0)

  1. this could mean memory, hard drive. or other hardware problems. In fact the lack of free disk space
  is a major cause. Make sure you have 20 GB or more of free space if possible.

  2. check with ASUStek support, their drivers and documentation online and ask in their forums

  on known problems. Updated the BIOS, chipset of low level driversand major embedded
  and drivers of different devices.

  BiosVersion = 0405
  BiosReleaseDate = 25/06/2012
  SystemManufacturer = system manufacturer
  SystemProductName = system product name
  Family = to be filled by O.E.M.
  SystemVersion = Version of the system
  SystemSKU = SKU
  BaseBoardManufacturer = ASUSTeK COMPUTER INC..
  BaseBoardProduct = P9X79 THE
  BaseBoardVersion = Rev 1. XX

  ASUS - Service<-- includes="" live="">
  http://www.service.ASUS.com/

  ASUStek support
  http://support.ASUS.com/

  ASUStek Forums
  http://VIP.ASUS.com/forum/default.aspx?SLanguage=en-us

  ASUStek drivers
  http://support.ASUS.com/download/download.aspx?SLanguage=en-us

  3 use ALL methods in the troubleshooters below if necessary.

  4 after ALL preceding if necessary run the Driver Verifier to see if he can indicate a CAUSE (see pilot
  Check the methods below).

  =================

  Methods to solve the problems:

  Resolution in Windows 7 stop errors (blue screen) - has a section for if you can or cannot start Windows.
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  See this thread for more information on using BlueScreenView, MyEventViewer and other methods of
  Troubleshoot BlueScreens - answers top 3 (+ 1 more).

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  ============================================================

  BCCode: 1st 0x0000001E

  
  Remove ALL power and reinstall all the memory cards and cables (both ends when)
  possible) - in fact, remove and replace - do not just tight. This is for a PC and on all
  that can be done for a laptop is reinstall the memory and clear the vents. Make sure the BIOS.
  low level chipset drivers and key device drivers are all up to date by check manually to the
  manufacturer websites.

  Bluescreens many are caused by the BIOS, drivers from the chipset level low and other main device drivers
  that are not the latest, even if the computer is new. Manually check for updates
  using the methods of updates as indicated in the resolution of the problems above and/or the
  methods below (which are the same).

  BCCode: 1st 0x0000001E

  Bug Check 0x1E: KMODE_EXCEPTION_NOT_HANDLED

  KMODE_EXCEPTION_NOT_HANDLED bug control has a value of 0x0000001E. This indicates that a kernel-mode program generated an exception which did not catch the error handler.

  Important info if you received a STOP Code

  If you received a blue error screen, or a stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.

  If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

  These actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

  KMODE_EXCEPTION_NOT_HANDLED parameters

  The following settings are displayed on the blue screen.

  Parameter	Description
  1	The code for the unhandled exception
  2	The address at which the exception occurred
  3	Parameter 0 of the exception
  4	Parameter 1 of the exception

  Cause

  It is a very common bug control. To interpret it, you must identify which exception has been generated.

  Common exception codes include:

  • 0 X 80000002: STATUS_DATATYPE_MISALIGNMENT

    An unaligned data reference was encountered.

  • 0 X 80000003: STATUS_BREAKPOINT

    A breakpoint or ASSERTION was met when no kernel debugger was attached to the system.

  • 0XC0000005: STATUS_ACCESS_VIOLATION

    A memory access violation has occurred. (Parameter 4, verification of bug is the address to which the driver attempted to access.)

  For a complete list of exception codes, see the ntstatus.h file located in the directory of the Windows Driver Kit inc.

  Resolution

  
  If you do not have to debug this problem, you must use certain basic troubleshooting techniques. If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates. Try changing video cards. Check with your hardware vendor for updates to the BIOS. Disable the BIOS memory options such as implementing caching or shading.

  
  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.

  If the exception code 0 x 80000003 occurs, this indicates that a breakpoint coded hard or assertion was hit, but the system was launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly, make sure a kernel debugger is connected and the system is booted with the Switch/DEBUG .

  In case of exception code 0 x 80000002, the trap frame will provide additional information.

  If you don't know the specific cause of the exception, the following should be considered:

  
  Hardware incompatibility. First of all, make sure that all new equipment installed is compatible with the installed version of Windows. For example, you can get information about compatibility with Windows 7 in the Windows 7 Compatibility Center.

  
  Service system or driver faulty device. In addition, a chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.

  If a driver is listed by name in the bug check message, disable or remove that driver. Disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, the service may be removed by the system startup by using the Recovery Console and by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help determine the device or driver responsible for control of bug 0x1E. Disable the cache in the BIOS memory could also resolve the error. You must also run hardware diagnostics, especially the scanner memory, provided by the manufacturer of the system. For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is incompatibility of the system BIOS. BIOS problems can be solved by upgrading the version of the system BIOS.

  To get a stack trace, if the normal battery monitoring procedures don't

  1. Use the command Ko (display Stack Backtrace) to display the parameters from the stack trace. Look for the call to NT! PspUnhandledExceptionInSystemThread. (If this function is not listed, see the note below.)

• The first parameter of NT! PspUnhandledExceptionInSystemThread is a pointer to a structure that contains pointers to an except statement:
  Copy

  typedef struct _EXCEPTION_POINTERS {PEXCEPTION_RECORD ExceptionRecord; PCONTEXT ContextRecord; } EXCEPTION_POINTERS, * PEXCEPTION_POINTERS; ULONG PspUnhandledExceptionInSystemThread (IN PEXCEPTION_POINTERS ExceptionPointers)

  Use the command dd (display memory) to this address to view the data.

• The first value retrieved is an exception record and the second is a context record. Use the command .exr (display Exception record) and the command .cxr (display context record) with these two values as arguments, respectively.

• After running the .cxr command, use the kb command to display a stack trace which is based on the registration context information. This stack trace indicates the call stack where the unhandled exception occurred.

Note  This procedure assumes that you can locate NT! PspUnhandledExceptionInSystemThread. However, in some cases (for example an access violation crash) you will not be able to do. In this case, to look ntoskrnl! KiDispatchException. The third parameter passed to this function is a trap frame address. Use .trap (trap Display frame) with this address to define the context of registry to the correct value. You can then perform the stack traces, issue other commands.

Here is an example of bug 0x1E on an x 86 processor control:

Bug_Check 0x1E - read link for the example
http://msdn.Microsoft.com/en-us/library/ff557408 (v = vs. 85) .aspx

BCCode: 1st 0x0000001E<-- read="" this="">
* 1045.html http://www.faultwire.com/solutions-fatal_error/Check-to-be-sure-you-have-adequate-Disk-Space-0x0000001E-

==================================================

Driver Verifier can help find some BSOD problems:

Using Driver Verifier to identify issues with Windows drivers for users advanced
http://support.Microsoft.com/kb/244617

How to solve the problems of driver in Windows Vista or 7.
http://www.WinVistaClub.com/T79.html

Using Driver Verifier
http://msdn.Microsoft.com/en-us/library/ff554113 (v = VS. 85) .aspx

How to use the Windows Driver Verifier Manager to troubleshoot and identify questionshttp://www.youtube.com/watch?v=_VwIDD9xngM Driver

Driver Verifier
http://www.techsupportforum.com/2110308-POST3.html

Using Driver Verifier
http://www.faultwire.com/solutions/using_driver_verifier.php

How to use Windows drivers check Manager to solve problems and identify the Driver questions
http://www.YouTube.com/watch?v=_VwIDD9xngM

You can disable the driver verifier
http://support.Microsoft.com/kb/244617

Start - type in the box search-> auditor/Reset hit enter to disable

BlueScreenView lets you know if there is a driver specified in the error message. Also check with
MyEventViewer at the blue screen.

If DriverVerifier creates a minidump download the and provide a link to it, then we can analyze it.

----------------------------------------------------------



References to Vista also apply to Windows 7.

It's my generic how updates of appropriate driver: (look for the BIOS and driver
updates.)

This utility, it is easy see which versions are loaded: run DriverView - define the VIEW
for the drivers Microsoft hide - updated those without drain in their names. (Also updated
the BIOS and chipset drivers.)

-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.html

For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.

Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.

Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.

Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.

Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.

Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it) and
Then, get new ones manually if you wish.

How to stop Windows 7 automatically install drivers
http://support.Microsoft.com/kb/2500967
==========================================

Tests of memory intercept all errors such as memory do not match (possible even for sticks
seemingly identical) and when the faster memory is placed in system behind the slower memory.
So it is best to Exchange also sticks in and out to check for those, even if all the tests of memory do not
show a problem.

To test the RAM here control - run 4 + hours or so.<-- best="">
www.memtest.org

For the Windows Memory Diagnostic tool.

Start - type in the search-> memory box - find top - click - right Memory Diagnostics tool
RUN AS ADMIN follow the instructions

Windows Vista: How to scan / test your memory with Windows Vista memory or RAM
Diagnostic tool
http://www.shivaranjan.com/2007/11/01/Windows-Vista-how-to-scan-test-your-RAM-or-memory-with-Windows-Vista-memory-diagnostic-tool/

How to run the diagnostic tool memory in Windows 7
http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html

I hope this helps.

Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• a dynamic link library (DLL) initialization routine failed.

  Original title: DLL routine failed

  I downloaded a program from CNET. Did not work so I removed it. A day or two later, I get the following error a lot.

  There was a problem starting

  C:\Users\EDITIN~1\AppData\Local\Temp\sbussnv\ssnyoyr\wow.dll

  a dynamic link library (DLL) initialization routine failed.

  I ran the auditor system and program files Microsoft security and found no integrity issues.

  At this stage it would be easier to upgrade to Ultimate (I use Professional now) that in order to understand the problem of the DOF. I guess the upgrade I will lose all files/programs, correct.

  Thank you

  Yes, that's correct Loran.  You can use the Professional disc window and perform the upgrade. This will put just the new copy of your computer's system files.

  But if you have the Ultimate version, you can use the ultimate disc or the ultimate product key to upgrade.

• Why am I repeatedly a blue screen?

  Yesterday, I started to have the blue screen of death while message on internet.  It happened several times in the last two days.

  Part of the message says * STOP: 0000001E (0xFFFFFFFFC0000096, 0xFFFFF80002CA6EEA, 0 x 0000000000000000, 0 x 0000000000000000)

  Any ideas?

  Two days ago my computer (HP) had me to perform an upgrade.  I think that has to do with that.

  Thank you

  Jerimiah

  Hello

  Check with HP Support, their drivers and documentation online and ask in their forums
  known with these updates or any other hardware or software issues.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ===========================================================

  Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or cannot start Windows.
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  See this thread for more information on using BlueScreenView, MyEventViewer and other methods of
  Troubleshoot BlueScreens - answers top 3 (+ 1 more).

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  ========================================================

  BCCode: 1st 0x0000001E

  Remove ALL power and reinstall all the memory cards and cables (both ends when)
  possible) - in fact, remove and replace - do not just tight. This is for a PC and on all
  that can be done for a laptop is reinstall the memory and clear the vents. Make sure the BIOS.
  low level chipset drivers and key device drivers are all up to date by check manually to the
  manufacturer websites.

  Bluescreens many are caused by the BIOS, drivers low-level chipset and other major device
  drivers that are not the latest, even if the computer is new. Check manually
  updates using the methods of updates as indicated in the resolution of the problems above
  and/or the following methods (which are the same).
  
  
  BCCode: 1st 0x0000001E

  Bug Check 0x1E: KMODE_EXCEPTION_NOT_HANDLED

  KMODE_EXCEPTION_NOT_HANDLED bug control has a value of 0x0000001E. This indicates that a kernel-mode program generated an exception which did not catch the error handler.

  Important info if you received a STOP Code

  If you received a blue error screen, or a stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.

  If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

  These actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

  KMODE_EXCEPTION_NOT_HANDLED parameters

  The following settings are displayed on the blue screen.

  Parameter	Description
  1	The code for the unhandled exception
  2	The address at which the exception occurred
  3	Parameter 0 of the exception
  4	Parameter 1 of the exception

  Cause

  It is a very common bug control. To interpret it, you must identify which exception has been generated.

  Common exception codes include:

  • 0 X 80000002: STATUS_DATATYPE_MISALIGNMENT

    An unaligned data reference was encountered.

  • 0 X 80000003: STATUS_BREAKPOINT

    A breakpoint or ASSERTION was met when no kernel debugger was attached to the system.

  • 0XC0000005: STATUS_ACCESS_VIOLATION

    A memory access violation has occurred. (Parameter 4, verification of bug is the address to which the driver attempted to access.)

  For a complete list of exception codes, see the ntstatus.h file located in the directory of the Windows Driver Kit inc.

  Resolution

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques. If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates. Try changing video cards. Check with your hardware vendor for updates to the BIOS. Disable the BIOS memory options such as implementing caching or shading.

  
  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.

  If the exception code 0 x 80000003 occurs, this indicates that a breakpoint coded hard or assertion was hit, but the system was launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly, make sure a kernel debugger is connected and the system is booted with the Switch/DEBUG .

  In case of exception code 0 x 80000002, the trap frame will provide additional information.

  If you don't know the specific cause of the exception, the following should be considered:

  
  Hardware incompatibility. First of all, make sure that all new equipment installed is compatible with the installed version of Windows. For example, you can get information about compatibility with Windows 7 in the Windows 7 Compatibility Center.

  
  Service system or driver faulty device. In addition, a chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.

  If a driver is listed by name in the bug check message, disable or remove that driver. Disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, the service may be removed by the system startup by using the Recovery Console and by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help determine the device or driver responsible for control of bug 0x1E. Disable the cache in the BIOS memory could also resolve the error. You must also run hardware diagnostics, especially the scanner memory, provided by the manufacturer of the system. For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is incompatibility of the system BIOS. BIOS problems can be solved by upgrading the version of the system BIOS.

  To get a stack trace, if the normal battery monitoring procedures don't

  1. Use the command Ko (display Stack Backtrace) to display the parameters from the stack trace. Look for the call to NT! PspUnhandledExceptionInSystemThread. (If this function is not listed, see the note below.)

• The first parameter of NT! PspUnhandledExceptionInSystemThread is a pointer to a structure that contains pointers to an except statement:
  Copy

  typedef struct _EXCEPTION_POINTERS {PEXCEPTION_RECORD ExceptionRecord; PCONTEXT ContextRecord; } EXCEPTION_POINTERS, * PEXCEPTION_POINTERS; ULONG PspUnhandledExceptionInSystemThread (IN PEXCEPTION_POINTERS ExceptionPointers)

  Use the command dd (display memory) to this address to view the data.

• The first value retrieved is an exception record and the second is a context record. Use the command .exr (display Exception record) and the command .cxr (display context record) with these two values as arguments, respectively.

• After running the .cxr command, use the kb command to display a stack trace which is based on the registration context information. This stack trace indicates the call stack where the unhandled exception occurred.

Note  This procedure assumes that you can locate NT! PspUnhandledExceptionInSystemThread. However, in some cases (for example an access violation crash) you will not be able to do. In this case, to look ntoskrnl! KiDispatchException. The third parameter passed to this function is a trap frame address. Use .trap (trap Display frame) with this address to define the context of registry to the correct value. You can then perform the stack traces, issue other commands.

Here is an example of bug 0x1E on an x 86 processor control:

Bug_Check 0x1E - read link for the example
http://msdn.Microsoft.com/en-us/library/ff557408 (v = vs. 85) .aspx

BCCode: 1st 0x0000001E<-- read="" this="">
* 1045.html http://www.faultwire.com/solutions-fatal_error/Check-to-be-sure-you-have-adequate-Disk-Space-0x0000001E-

==========================================================

References to Vista also apply to Windows 7.

It's my generic how updates of appropriate driver: (main drivers and BIOS)

This utility, it is easy see which versions are loaded:

-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.html

For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.

Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.

Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.

Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.

Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.

Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.

Stop Windows 7 to automatically install device drivers
http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

How to disable automatic driver Installation in Windows 7 / Vista
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
Ultimate and Enterprise)
http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

==========================================

Tests of memory intercept all errors such as memory do not match (possible even for sticks
seemingly identical) and when the faster memory is placed in system behind the slower memory.
So it is best to Exchange also glue in and out to check for those, even if all the tests of memory do not respond
a problem.

To test the RAM here control - run 4 + hours or so.<-- best="">
www.memtest.org

For the Windows Memory Diagnostic tool.

Start - type in the search-> memory box - find top - click - right Memory Diagnostics tool
RUN AS ADMIN follow the instructions

Windows Vista: How to scan / test your RAM or memory with Windows Vista Memory Diagnostic
Tool
http://www.shivaranjan.com/2007/11/01/Windows-Vista-how-to-scan-test-your-RAM-or-memory-with-Windows-Vista-memory-diagnostic-tool/

How to run the diagnostic tool memory in Windows 7
http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html

I hope this helps.

Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">