Yoga 2 Pro big screen flicker followed in black

Similar Questions

• Yoga 2 Pro Black Screen after Bios Update

  Only, I have formatted my yoga 2 pro, downloaded the drivers and ran the update of the Bios. I followed the instructions on playing ran me the .exe, one click on next/ok until you restart the laptop and if I'm not mistaken a menu red with a progress bar appeared. At this time, I left and when I came back a few minutes later, the laptop is on, the lighting of the screen was on but the screen was black, the backlight of the keyboard was also turned on and everything else was off. Lights on/near the switch indicating if there turned on and connected to the AC are off.

  It was like that for more than 30 minutes now, no sign of progress. This happened to someone else before? I'm not very keen on must turn off or unplug the laptop while flashing the BIOS, but at this point there is not much else I can do.

  I found the answer to my problem to

  http://forums.Lenovo.com/T5/idea-Windows-based-tablets-and/yoga-2-BIOS-update-crash/m-p/1322487/high...

  Now that I found this post, I remember the instructions telling me to turn it off manually when I've updated the bios earlier this year. However, these instructions don't mention about it, maybe they should be updated?

• Yoga 2 pro 13'3 andro tab stops automatically when the screen is off & dosnt start evn battery is30 - 80%

  Hello

  I am facing this problem with Yoga 2 pro 13'3 pellets. It stops automatically when the screen is off and dosnt start until it is connected to the charger and press the same power button 30 to 80% battery. I don't know what it is. This happens every time

  No help for it?

  
  

• Yoga 3 pro - screen will not stop flickering since installing windows 10!

  Hello.

  I hope someone can help. I just upgraded to Windows 10 and my screen constantly flickers! I guess it's because as his clashes with some pre installed software lenovo. someone at - it the same problem? I don't think its any other software that I have many installed on my PC as I normally only use webapps (only the additions usual google chrome, anti virus)

  model name: 80HE Lenovo yoga 1370 pro 3

  appreciate your help. I'm going crazy with this

  see you soon

  Neil

  
  

• Yoga Pro 2 - screen flickers

  I bought a Yoga 2 Pro in December 2014 - for months the screen will blink and turning several times and then return him. If anyone has had this problem and is there a solution or is it a default.

  Thank you

  ryoung151

  Welcome to the forums!

  Although rare, the tablecloth that connects the screen can sometimes come off after opening and closing times for the years. I have seen this problem with all brands and makes.

  Unfortunately, most of the disassembly instructions are videos. If you feel able to work on the device, you can check the connection on the motherboard and display side. Optionally, any local computer store should be willing to check this for you.

  Good luck!

• Yoga 2 Pro - keyboard is not activated when you open the lid of the screen after sleep

  My Yoga 2 Pro has very often problems to activate the keyboard when I open the screen.

  That's what I do:

  -work with Yoga 2 Pro

  -Close all applications and after that, I close the screen

  -After some time (maybe a few minutes or several hours) I open the screen

  -It will take a few seconds until the screen is turned on (which is expected)

  -at least 50%, the rest keyboard disabled. The backlight cannot be activated and the laptop does not notice any key. I'm unable to log :-(

  -J' I need to close the screen, it takes a few seconds - and when I open the screen for the second time, the keyboard is enabled - not always, but usually. But sometimes the keypad remains disabled, although I try the procedure several times. If that happens, I need to restart the machine.

  All the drivers are up to date.

  @Lenovo: Please indicate how to solve this problem! It's very annoying open-close-open-close-open-... the display up to what the keyboard is finally activated!

  Kind regards

  Oliver

  http://download.Lenovo.com/Consumer/mobiles/transit136w81.exe
  Transition of Lenovo 2.0 for Windows (32-bit, 64-bit) 8.1 - Lenovo Yoga 2 Pro

• Yoga Pro 2 - Screen Rotation

  I accidentally deleted the screen rotation program in my Yoga 2 Pro. Does anyone know what program it is and how to reinstall?

  Thanks for your help in advance guys.

  
  

• Yoga Pro 2 - screen does not turn on new 8.1 Windows Installer

  Last week, I received my new Yoga 2 Pro and the rotation of the screen worked correctly.

  I decided to delete the partitions and install my own version of Windows 8.1.

  Since then, the rotation of the screen does not work. The screen rotation button does nothing and I do not have the "Enable automatic rotation" box in the screen resolution

  In my device manager, I have an error on 'Collection HID sensor' saying "this decice cannot start" (Code 10). Failed to initialize sensor collection HID descriptor. I don't know if this is related.

  Can someone help me?

  Thank you

  I was able to solve my problem and would like to share the solution with others in case this happens to you too.

  I basically installed this package of media (http://www.microsoft.com/en-us/download/details.aspx?id=42503) and after that auto-rotation check button and work of suction works correctly.

  Hope that this can also contribute to others.

• I just put cc2014 photoshop and illustrator on my new lenovo yoga 2 pro, illustrator is great, all the menus are big enough to use but in photoshop, everything is so small its almost impossible to use. can someone tell me if a fix for who or why his

  I just put cc2014 photoshop and illustrator on my new lenovo yoga 2 pro, illustrator is great, all the menus are big enough to use but in photoshop, everything is so small its almost impossible to use. can someone tell me if a fix for who or why its doing just in photoshop

  Go to the Photoshop preferences > experimental features > scale IU 200%

  I don't know if has Illustrator of the same function, but you can view this forum.

  Note: If this answers your question, please mark as answer.

• I closed my laptop (Macbook pro 2012) screen with a day and immediately after 30-40 minutes his does not starts once again.

  I closed my laptop (Macbook pro 2012) screen with a day and immediately after 30-40 minutes his does not starts once again.

  Hello Varshil07,

  Thank you for using communities of Apple Support.

  If I understand your message, by updating your Mac you have forced stop, or you have closed the lid, and now it does not start.  To start, I suggest that try you to start in safe mode by following the instructions below.  For later use, it's a good idea to not force the computer to shut down or close the lid while it is up to date, because it can cause problems.

  1. Choose the Apple menu > shut down.

  2. After your Mac stops, wait 10 seconds, then press the power button.

  3. As soon as you hear the startup tone, hold down the SHIFT key.

     You must press the SHIFT key as soon as possible once you hear the startup tone, but not before.

  4. Release the SHIFT key when you see the gray Apple logo and progress indicator.

  To exit safe mode, restart your Mac, but no press during the startup.

  OS X El Capitan: start in safe mode

  Have a good.

• Portege M200: big screen via the port replicator

  I have a Portege M200 with APR III. I realized that the DVI Jack does not work with it, even if for some reason any, even though they are not supposed to all other ports don't. EACH of them!

  What I'm asking today is how the hell can I get the laptop out on the big screen through the APR? I tried everything, it has the chipset nVidia go 5200 FX (which is able to output DVI according to nVidia)

  I just got a Philips 20 "widescreen TFT and got tired of watching her in the stretched standard resolutions.

  One of my friends has also Tosh lappy, but it's a Tecra 9100, which will be released on the big screen without any questions whatever it is standard, it appears as an option in the Billboard settins. In addition, nVidia say that this chipset is capable of custom resolutions, but I can't find it in the updated anywhere driver.

  Can anyone help?

  Hello

  Well the Tecra9100 is not a Portege M200. Are completely different books.
  The M200 protected does not support these interfaces.
  This is a technical limitation, that the port of mouse PS/2 keyboard PS/2 port, serial port, I Link (Firewire) port and DVI port
  will be not supported on the Advanced Port Replicator III, if a protected M200 is moored.

  The following ports are supported and can be used:
  Line-in Jack, taken Line-out, USB port, port external monitor, parallel port, taken Modem, LAN jack, DC IN 15V, housing for security lock, locking the computer.
  In the documentation for the Advanced Port Replicator III is a 'fact sheet for III Advanced Port Replicator"sheet where this limitation is descripted.

• Yoga 2 Pro - subwoofer help required

  The subwoofer on my Yoga 2 Pro no longer works. Finally, he worked a month or two ago after not working not for a while but it only lasted until I turned it off and it never worked again. I waited to make the upgrade of the lollipop, but no dice. Someone had a serious failure box and if so is it possible to raise it from the dead?

  I tried to contact support via the page contact us and I have the big saying green bar in warranty, but when I click on step 2, nothing happens so I can't even contact Lenovo support!

  Just a quick update. I did a factory reset and the subwoofer started to work again.

• Yoga 3 Pro - automatically change the mode when reversing my Yoga 3 Pro

  Hello world.

  After a new installation from scratch on Windows 10 which incredibly fixed a lot of issues and boosted the performance of Yoga 3 Pro I, one thing still in my list of problem.

  For some reason any when I flip tent mode or in tablet mode, it will automatically in tablet mode, and I have to do it manually.
  The work of all the drivers, no problem with the rotation of the screen or anything else, I have activated the function "don't ask me and automatically activate tablet mode" in the system settings, but that doesn't change anything.

  He just format my PC and use harmony no more? I am of ideas at the moment.

  Thank you in advance!

  Mod edit: System model added to the front of the subject line to improve visibility / clarity.

  Sorry, you must click on the link show more inside drivers and software section to disclose the full list of available software. Here is the same page for the United States and in English:

  http://support.Lenovo.com/us/en/products/laptops-and-netbooks/Yoga-series/Yoga-3-Pro-1370-laptop-Len...

• Yoga 2 Pro - cursor flashes when moving on some programs

  I have a Yoga 2 Pro with Windows 10. Some programs (for example Thunderbird, LibreOffice), the cursor flashes when moving on the program window. I made sure my screen and touchpad drivers are up to date as well as the BIOS of my laptop. What else could be the cause? It's a bit irritating.

  Mod edit: System model added to the front of the subject line to improve visibility / clarity.

  Went before and refreshed; things seem to work fine now. I guess the moral is 'don't do an upgrade directly from Windows 8.1 to 10'.

• My Yoga 2 Pro transition mode no longer works

  Screen of my Yoga 2 Pro is not SET automatically on the transition mode that I put. I've already uninstalled and again installed the software of Transition, but it does not solve. What should I do?

  The rotation sensor may be damaged. Try to contact Lenovo support to see what are the options they have.