Similar Questions

• Help in installing Discoverer (11.1.1.2.0), forms, reports, and Oracle Portal

  Hello
  
  I try to install Oracle Portal, forms, reports and discoverer 11g (11.1.1.2.0) for Linux x 86-64.
  I installed the jar file generic weblogic 10.3.5.
  
  When I try to install forms and report server configuration step fails when creating weblogic domain.
  
  Help me please install portal and reports.
  Is there a patch I'm missing or the version of weblogic is incorrect?
  
  Thank you.

  You cannot configure Fmw 11.1.1.2 against WLS 10.3.5. They are not taken in charge or compatible.

  If you want to use WLS 10.3.5, you need to 'install' 11.1.1.2, but do not configure. This is an installation option. After installing 11.1.1.2 successfully, you need the patch to 11.1.1.6. After connecting, you can then run the configuration (config.bat).

  http://docs.Oracle.com/CD/E23943_01/install.1111/e10421/install.htm#CLINS256

  Version 11 is much more complex than previous versions. I urge you all to review the product documentation prior to installation. Alternatively, you can refer to the following MyOracleSupport note:

  Measures to maintain the Oracle Fusion Middleware 11g Release 1 (11.1.1) (Doc ID 1073776.1)

• OBIEE and Oracle Portal

  Hello.
  someone to tell me if it is possible put a dashboard or an OBIEE report or the report editor in Oracle Portal?
  If the portal is a free version because included in technology Foundation Jde, you must have a license to integrate an editor/OBIEE report in Oracle Portal?
  
  Thank you
  
  Sara

  Hi, Sara C.,.

  If your question has been answered you can distribute points to those who helped and set the thread to answer? It helps users avoid research questions which have already been resolved.

  Thank you and best regards!

  -Joe

• Oracle Portal and Webcenter

  Hi all
  
  We have Oracle Portal 10.1.4 put in place for our intranet and it works fine. We use for the past 2 years. Now, we'd like web2.0 applications
  
  forums, wiki, voip to improve our interaction used. The below shot suggestion s to webcenters blog allows to choose the technique if it for a new implementation.
  
  http://blogs.Oracle.com/WebCenter/.
  
  
  How ever may all explain please is a good choice to move to portal oracle webcenter for new requirements like forums, wiki, voip.etc...
  
  If we we have an enough time to develop the application for forums and blogs (this could be done through Portal) is it interesting to get a webcenter?
  
  
  We have only less content on the portal, most of them are content static managed by portal admins.
  
  Please suggest me on this migration/choice of technology...
  
  Thank you
  -Prem

  Hello
  We use the Webcenter Framework for a customer who is already on the Oracle Portal.
  It's really a good product built by Oracle. Surely, you can migrate to webcenter taking into account the following points:

  Easy integration and strengthening of Wiki, Blogs, Chat, Forum
  Very easy to build, rapid development
  WebCenter is provided with his own example for Forums of Discussion, Wiki (we have tried and tested that it works very well)
  Support for Oracle Portal will be removed in the near future and Oracle itself supports the migration to Webcenter or BEA Weblogic portal (since now they bought BEA)
  Can migrate to webcenter if you do not have to create new pages frequently (unlike the portal where you can create new pages / subpages on the fly, creating pages in the Webcenter application will you deploy the application again after construction it.)

  However, there are some things that you should keep in mind:

  WebCenter is relatively new, and as a result, there are a few bugs in version 10g
  11g was released in beta version and if all goes well, there are many many improvements and I saw some features more (would be wise to migrate to 11g)
  We are facing a few memory problems with webcenter applications, but mainly due to use of ADF Portlets in large numbers. (Hopefully resolve this soon)

  Hope these points are helpful.

  -Kunal

• ODI and Siebel CRM - Modules of knowledge Oracle Siebel CRM in Oracle Data Integrator.

  Hi all

  I'm looking for information on ODI and Siebel CRM.

  Part 1:

  For the moment, we do not use ODI to load data into Siebel, guys on the team here

  do a lot of PL/SQL for CEF Siebel system tables. (I'm not a person of Siebel)

  Part 2:

  Then these tables of Siebel, I use ODI BI Apps to finally get the data for some dashboards OBIEE.

  I thought that maybe there would be a better way to do part 1 using ODI.

  According to me, that there is a knowledge Oracle Siebel CRM Modules in Oracle Data Integrator.

  http://docs.Oracle.com/CD/E21764_01/doc.1111/e17466/oracle_siebel.htm#ODIAA461

  Here's what we have:

  ODI 11.1.1.7.0 Patch 18204886

  ODI BI Apps 11.1.1.8.1

  Siebel Version 8.1.1

  Pointers to people who have made would be apprecated.

  Eric

  After talking with my boyfriend of Siebel, here's what I understand:

  ODI will load the tables of EIM, which, said, is 75% of employment

  and the last 25% is the .ifb file is generated and ths to run the file on the

  Server Manager.

  Yes, ODI can load data but my guy Siebel

  the ifb file will have to be revised manually...

  When I get a moment, I'll do a small test case and see

  If I can build and run a simple example of this in ODI.

  A small proof of concept.

  Eric

• OAM and Siebel integration

  Hi all
  
  We get the following configuration:
  11.1.2 OAM
  OVD 11.1.1.6 to access the user information
  8.1.1.9 Siebel
  
  Is there a document explaining how to integrate OAM and OVD (or any LDAP repository) with this version of Siebel.
  
  I can only find documents speaking of OAM 10g, not in OAM 11 g in combination with Siebel.
  
  Thank you in advance.
  
  Filip Huysmans

  Hi Filip,

  If OVD can provide an attribute that contains a user name that Siebel, then it will be great for the integration of Siebel - this is the same as for any other LDAP server. The only documentation I can suggest is the General documentation of the OAM (Administrator's Guide).

  Kind regards
  Colin

• zip file to create diagrams for Oracle and Oracle Discoverer Portal

  Hello everyone.
  
  Im trying to install WebLogic for forms and reports under linux,
  I need the zip file to create diagrams for Oracle and Oracle Discoverer Portal
  to run the rcu scrip.
  
  Can someone send me the link where I can find it?
  
  Thanks to advanced & happy new year to all.

  If you are a developer of FMw 11 g installation, you need not configure the portal or the discoverer, unless of course you plan to use these products.

  When I installed and configured the FMw 11 g, I followed the * how to install Fusion Middleware 11 g forms and reports only [854117.1 ID] * (available via My Oracle Support). WLS and FMw share the Directory Home of Middleware. I accepted directories default installation (\Oracle\Middleware\) and WLS installed in \Oracle\Middleware\wlserver_10.3 and FMw installed at \Oracle\Middleware\Oracle_PFRD, and the Instance of forms at \Oracle\Middleware\instances\ft_inst. More Doc ID 854117.1, I chose only the following for installation in step "configure the components:
  

  
  
  • Server - Oracle Forms and Oracle reports components
    
  • Developer - Oracle Forms Builder and Oracle report builder tools
    
  • Management components - Enterprise Manager
    
  • The system - Oracle HTTP Server components
    

  IM thinking I have need save the fmx in a directory of this tree and also the FMAS and configure ther formsweb agreeing with that.

  It is not necessary. All you have to do is add the Variable environment of FORMS_PATH (EV) and include the directory where your files .fmb and .fmx will be created. This EV indicates forms where to find your forms Modules and libraries of forms (.pll/.plx) you can use in your forms.

  The usefulness of the repository creation (RCU), you can download it here: http://www.oracle.com/technetwork/middleware/downloads/fmw-11-download-092893.html
  Just scroll down for the * @ section additional software required and there is a separate download.

  Craig...

• integrating the OPA rightnow cx and customer portal

  Hi every one i am incorporating opa righnow cx and customer portal. I am able to see the interview on the customer portal screens, but by submitting the details, it's showing an error saying

  An error occurred when loading or saving data.
  For further assistance please contact support.

  You can just about give me a solution for this.

  I'm guessing that your RightNow site requires the transaction state field to set and you are currently does not provide a when you save the incident. Try to create an attribute of text OPA, write a rule that assigns 1 (or a State of transaction value valid), it mapping for the status of transaction on the Incident field and see what happens.

• Suite of Oracle e-Business with OAM and IWA

  Hello
  
  We are about to implement a sso project to the following prescriptions.
  
  When users try to access the E-Business Suite, their windows logon is automatically recognized by OAM and they are authenticated by ad of them on target AD systems accounts.
  
  We plan to design as follows.
  
  1. users to connect on their machines and access to the eBusiness suite, you will be provided to link.
  2. this link redirects users to an IIS server that is on a separate machine that E-Business suite. WebGate and IWA is installed on the IIS server that allows to recognize the windows of the user connection and authenticates the user through OAM.
  3. after a successful authentication accesses the request without entering passwords.
  
  The question is whether this application is possible without oSSO side eBusiness suite. And do we need IIS to work as a proxy reverse to the way multi redirect? I couldn't exactly find a best practice for this scenario.
  
  Any help will be appreciated a lot!
  
  Thank you
  ECE

  I don't see how you would be able to integrate OAM with EBS, unless you have the oSSO (assuming of course that you are not on the bleeding edge, by 975182.1).

  We run the same configuration and installation in politics OAM redirects. We plant the roots of specific context for each application, then use the OAM strategy to redirect. (for example, http://iwa-server/ebs redirects to https://ebs-server)

  Rule single authorisation for each redirection, then a unique 'policy' in the 'Stratégies' tab for each redirection. Each strategy corresponds to the respective authorization rule.

• OID/OAM with Oracle E-Business Suite

  Hello world
  
  OID is integrated successfully with Oracle E-Business Suite. Administrator as SYSADMIN, COMMENTS are able to login and access E-Business Suite with the redirected OID/SSO login Page. These users are migrated under OU = Finance, OU = employees, dc = myorg, dc = com via the load utility bulk OID.
  
  Via the OIDDAS Console (http:// < myorg >: 7777/oiddas), under Setup tab-> add an entry for OU = Finance, or = employees, dc = myorg, dc = com for the basis of creating users. OID administrator created a new user (i.e. the user fintest) under finance container through the console of OIDDAS and the same user is implemented in E-Business Suite Database under table FND_USER provided with a Globally Unique Identifier.
  
  (1) user created through the OIDDAS console will launch and access E-Business Suite URL (http:// < myorg >: 8000)
  (2) page of redirect OID/SSO Login appears.
  (3) fintest user will provide required login and password value to connect.
  (4) E-Business Suite homepage will be displayed for users fintest.
  
  I had a UI presentation layer where Oracle Access Manager is installed with the Server LDAP OID. Created a new workflow user finance Molok (OU = Finance, OU = employees, dc = myorg, dc = com). OAM administrator has created a new user (i.e. the user fintest2) under Finance container through workflows OAM and the same user is not supplied with E-Business Suite Database under table FND_USER provided with a Globally Unique Identifier.
  
  (1) user created through Workflows OAM will launch and access E-Business Suite URL (http:// < myorg >: 8000)
  (2) page of redirect OID/SSO Login appears.
  (3) fintest2 the user will provide required login and password value to connect.
  (4) in E-Business Suite oracle has not been linked with the Single-Sign-On account in place and place the homepage of E-Business.
  
  Note: We do not expect to make integration with OAM with Oracle E-Business Suite.
  
  Has anyone faced this kind of question. Please let me know your pointers.
  
  Thank you
  Ajay

  Hello

  Connect to Oracle Internet Directory, search EBusiness provisioning profile, remove the attribute of orclisenabled user profile in IDENTITY and SUBSCRIPTION list of areas for the properties of the parameter orclodipprovisioningeventsubscription.

  Thank you
  Ajay Babu Pentela

• SSO ADF and Oracle Forms?

  Hello

  Is there a recommended way to share authentication between ADF and Oracle forms?

  We currently use Oracle 11 g 2 forms and we have our forms developed in-house running on this.  I would like to start working on some applications of the ADF, but I do not know how to ensure that the username and passwords are the same for our existing forms applications and any new request to ADF we add.

  I would use JDeveloper 12 c.

  We have < 100 users, so this isn't a large installation, and most users are (same office).

  Thanks for ideas or advice.

  Check out this blog https://blogs.oracle.com/olaf/entry/ofm_11g_oam_sso_for_forms_and because it describes how using OAM.

  Timo

• Keystore of JKS and Truststore, and Oracle Wallet

  I'm configureing Oracle Forms and reports 11 GR 2 incorporating OID/OIM/OAM webgate/webtier.  WLS use JKS Keystore and Truststore, and Oracle HTTP Oracle Wallet. I have all of this on a single server. Do I have to keep two of them? I asked a certificate with OWM. It can also be used by JKS Keystore?

  What should I do?

  Thank you!

  HP

  Oracle Wallet is used by OHS, while WebLogic uses based JKS keystore.

  So if you have the OHS and WebLogic and there is a requirement for SSL, you need both.

  Ref: http://docs.oracle.com/cd/E23943_01/core.1111/e10105/wallets.htm#ASADM10226

• Problem with Oracle fail safe 4.1.1 on W2k8 R2 Cluster Failover and Oracle 11.2.0.4 database

  Hi all

  I'm doing some tests on a Windows 2008 (64-bit) R2 two-node failover Cluster.

  I installed and configured successfully bone and the Failover Cluster feature.

  So I followed Oracle Doc-ID 1916391.1 to perform the installation and configuration of Oracle 11.2.0.4 database and Oracle Fail Safe 4.1.1

  After a successful (via Fail Safe Manager) validation of cluster and group, now I'm trying to validate the stand-alone database, but I'm stuck with this error (output in verbose mode of PowerShell):

  PS C:\Users\demo > Test-OracleClusterAvailableDatabase TESTDB - SysPwd (Read-Host-AsSecureString-Prompt "SYS Password ')-verbose

  SYS password: *.

  DETAILES: FS-10915: NODE1: from verification of autonomous resources TESTDB

  DETAILES: FS-10371: NODE1: run the initialization processing

  DETAILES: FS-10371: NODE2: run the initialization processing

  DETAILES: FS-10372: NODE1: resource owner information collection

  DETAILES: FS-10372: NODE2: resource owner information collection

  DETAILES: FS-10373: NODE1: determine the owner of the TESTDB resource node

  DETAILES: FS-10374: NODE1: collection of cluster information required to perform the specified operation

  DETAILES: FS-10374: NODE2: collection of cluster information required to perform the specified operation

  DETAILES: FS-10375: NODE1: analysis of the cluster information required to perform the specified operation

  DETAILES: FS-10378: NODE1: preparation for the configuration of resource TESTDB

  TH: FS-10349: database TESTDB instance is not alive. You want to stop and restart the database instance?

  Confirmation

  Operation does?

  Running dell' operation sulla "Test-OracleClusterAvailableDatabase' likelihood 'TESTDB '.

  [S] Sì Sì [T] a [N] no [U] tutti a tutti [O] Sospendi [?] Guida (he valore predefinito e "S"):

  DETAILES: FS-10350: from the TESTDB database

  Test-OracleClusterAvailableDatabase: OCIEnvNlsCreate failed

  
  

  Riga: 1 car: 1

  + Test-OracleClusterAvailableDatabase - SysPwd TESTDB (Read-Host - AsSecureString - P...)

  + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  + CategoryInfo: DeviceError: (TESTDB:ResourceDatabase) [Test-OracleClusterAvailableDatabase], PowerShell

  Exception

  + FullyQualifiedErrorId: Process, Oracle.FailSafe.PowerShell.TestOracleClusterAvailableDatabase

  Test-OracleClusterAvailableDatabase: FS-10999: an internal programming error

  Riga: 1 car: 1

  + Test-OracleClusterAvailableDatabase - SysPwd TESTDB (Read-Host - AsSecureString - P...)

  + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  + CategoryInfo: DeviceError: (TESTDB:ResourceDatabase) [Test-OracleClusterAvailableDatabase], PowerShell

  Exception

  + FullyQualifiedErrorId: Process, Oracle.FailSafe.PowerShell.TestOracleClusterAvailableDatabase

  Test-OracleClusterAvailableDatabase: FS-10160: impossible to verify the Oracle of standalone TESTDB database

  Riga: 1 car: 1

  + Test-OracleClusterAvailableDatabase - SysPwd TESTDB (Read-Host - AsSecureString - P...)

  + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  + CategoryInfo: DeviceError: (TESTDB:ResourceDatabase) [Test-OracleClusterAvailableDatabase], PowerShell

  Exception

  + FullyQualifiedErrorId: Process, Oracle.FailSafe.PowerShell.TestOracleClusterAvailableDatabase

  Test-OracleClusterAvailableDatabase: FS-10818: provider of resources of the database Oracle failed in preparing for

  treatment for TESTDB resource configuration

  Riga: 1 car: 1

  + Test-OracleClusterAvailableDatabase - SysPwd TESTDB (Read-Host - AsSecureString - P...)

  + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  + CategoryInfo: DeviceError: (TESTDB:ResourceDatabase) [Test-OracleClusterAvailableDatabase], PowerShell

  Exception

  + FullyQualifiedErrorId: Process, Oracle.FailSafe.PowerShell.TestOracleClusterAvailableDatabase

  Test-OracleClusterAvailableDatabase: FS-10890: Oracle Services for MSCS failed during the verifyStandalone operation

  Riga: 1 car: 1

  + Test-OracleClusterAvailableDatabase - SysPwd TESTDB (Read-Host - AsSecureString - P...)

  + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  + CategoryInfo: DeviceError: (TESTDB:ResourceDatabase) [Test-OracleClusterAvailableDatabase], PowerShell

  Exception

  + FullyQualifiedErrorId: Process, Oracle.FailSafe.PowerShell.TestOracleClusterAvailableDatabase

  Attached is the log of the OFS Cluster Dump (no error in my opinion).

  I surfed around but I can't find anything to solve the problem.

  I think something about the language of the (Italian) OS and Oracle NLS settings (AMERICAN. AMERICA), but obviolsly I'm not sure about this.

  Thanks in advance for any suggestion,

  Alessandro

  Message modificato da 1d457339-524e-4aa5-94aa-fd7d1ae98732 updated: attached is also output trace of the fss.

  Hello Alessandro.

  Solution to the issue is:

  Patch 20744940: 4.1.1.1: ORACLE FAIL SAFE VERSION 4.1.1 PATCH SET 1

• Unable to see patterns while improving to Oracle Data Integrator 12cR1 (12.1.2.0.0) version

  Hello

  I use windows 7 Professional (service pack 1) 64 bit operating system.

  I am trying to run the ua.bat file to upgrade the system to 12 c.

  I chose the following options after running the upgrade wizard

  patterns-> Oracle Data Integrator.

  Then in step 5.
  

  Type of database: Oracle database and details to connect to the database.

  But after connecting, I only see the TEST_MASTER schema and nothing else.

  
  

  Thanks and greetings

  Sunil
  

  
  

  
  

  Hello

  I tried your method, but I discovered that the schema will be shown falling down only if they are created using tool provided by oracle RCU. So what I've done is created a new schema using odi RCU 11.1.1.7 version, then created master repository to help to odi, then any data from the previous version to this same data also imported to repository work and then began the process of upgrading again.

• High availability Oracle Data Integrator-start managed servers exception

  Hello
  
  I am trying to configure high availability Oracle Data Integrator, using this tutorial: http://docs.oracle.com/cd/E14571_01/core.1111/e10106/odi.htm#autoId19
  
  Unfortunatelly, always without success. I stopped on ' 7.4.2.8 odi_server1 configure Node Manager and Start. My server fails to start because of the exception:
  
  WLS starting with line:
  /usr/lib/JVM/Java-1.6.0-openjdk-1.6.0.0.x86_64/bin/Java-serveur-Xms256m-Xmx512m - XX : MaxPermSize = 512m-Dweblogic.Name=odi_server1-Djava.security.policy=/home/oracle/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.policy-Dweblogic.ProductionModeEnabled=true-Dweblogic.system.BootIdentityFile=/home/oracle/Oracle/Middleware/user_projects/domains/odi_cluster/servers/odi_server1/data/nodemanager/boot.properties-Dweblogic.nodemanager.ServiceEnabled=true-Dweblogic.security.SSL.ignoreHostnameVerification=false-Dweblogic.ReverseDNSAllowed=false-Doracle.odi.coherence.wka1=eb-etl1 Doracle.odi.coherence.wka1.port=9088-Doracle.odi.coherence.wka2=eb-etl2-Doracle.odi.coherence.wka2.port=9088-Dtangosol.coherence.localport=9088--Dwls.home=/home/-Dplatform.home=/home/oracle/Oracle/Middleware/wlserver_10.3 da oracle/Oracle/Middleware/wlserver_10.3/server-Dweblogic.home=/home/oracle/Oracle/Middleware/wlserver_10.3/server-Dcommon.components.home=/home/oracle/Oracle/Middleware/oracle_common-Djrf.version=11.1.1-Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger-Ddomain.home=/home/oracle/Oracle/Middleware/user_projects/domains/odi_cluster-Djrockit.optfile=/home/oracle/Oracle/Middleware/oracle_common/modules/oracle.jrf_11.1.1/jrocket_optfile.txt-Doracle.server.config.dir=/home/oracle/Oracle/Middleware/user_projects/domains/odi_cluster/config/fmwconfig/servers/odi_server1-Doracle.domain.config.dir=/home/oracle/Oracle/Middleware/user_projects/domains/odi_cluster/config/fmwconfig-Digf.arisidbeans.carmlloc=/home/oracle/Oracle/Middleware/user_ projets/domaines/odi_cluster/config/ fmwconfig/carml-Digf.arisidstack.home=/home/oracle/Oracle/Middleware/user_projects/domains/odi_cluster/config/fmwconfig/arisidprovider-Doracle.security.jps.config=/home/oracle/Oracle/Middleware/user_projects/domains/odi_cluster/config/fmwconfig/jps-config.xml-Doracle.deployed.app.dir=/home/oracle/Oracle/Middleware/user_projects/domains/odi_cluster/servers/odi_server1/tmp/_WL_user-Doracle.deployed.app.ext=/--Dweblogic.alternateTypesDirectory=/home/oracle/Oracle/Middleware/oracle_common/modules/oracle.ossoiap_11.1.1,/home/oracle/Oracle/Middleware/oracle_common/modules/oracle.oamprovider_11.1.1-Djava.protocol.handler.pkgs=oracle.mds.net.protocol - Dweblogic.jdbc.remoteEnabled=false-Dem.oracle.home=/home/oracle/Oracle/Middleware/oracle_common - Djava.awt.headless=true-Dodi.oracle.home=/home/oracle /Oracle/Middleware/Oracle_ODI1-Dodi.shared.config.dir.path=/home/oracle/Oracle/Middleware/user_projects/domains/odi_cluster/config/oracledi-Dweblogic.management.discover=false-Dweblogic.management.server= http://172.18.0.106 : 7005 - Dwlw.iterativeDev=false-Dwlw.testConsole=false-Dwlw.logErrorsToConsole=false-Dweblogic.ext.dirs=/home/oracle/Oracle/Middleware/patch_wls1036/profiles/default/sysext_manifest_classpath:/home/oracle/Oracle/Middleware/patch_ocp371/profiles/default/sysext_manifest_classpath weblogic. Server
  Exception in thread "main" java.lang.NoClassDefFoundError: Doracle/odi/coherence/wka1/port = 9088
  Caused by: java.lang.ClassNotFoundException: Doracle.odi.coherence.wka1.port = 9088
  in java.net.URLClassLoader$ 1.run(URLClassLoader.java:202)
  at java.security.AccessController.doPrivileged (Native Method)
  at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
  at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
  to Sun.misc.Launcher$appclassloader$ AppClassLoader.loadClass (Launcher.java:301)
  at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
  The main class is not found: Doracle.odi.coherence.wka1.port = 9088. Program ends.
  
  Everything is configured exactly as described tutorial, but it does not work. You have ideas, what is the problem?

  It is because of the lack of '-' before Doracle.odi.coherence.wka1.port = 9088