\3\LXCYtime.dll starting problem

Similar Questions

• \3\LXCRtime.dll starting problem

  When I start a message box saying returns the file \3\LXCRtime.dll & recently something happened where all my shortcuts & photos on picassa has wiped. can you help me please?

  I think that your user profile has been corrupted and Windows loaded the default profile.

  I will move this discussion to the windows - system repair and recovery topic area.
  You might want to stand out my answer above as answer so that your question is not neglected.
  You did not mention which version of Windows you are using, and it will take someone to guide you in the recovery of your system.
  -steve

• Phqxnddxz.dll starting problem

  The specified module could not be found. Where can I get this dll file?

  Sounds like the remains of remnants of a virus using a compound name. Be happy it's gone!

• Starting problems. - RunDLL32.exe, procedure entry point_except_handler4_common could not be located in the dynamic link librarymsvcrt.dll

  I get the message RunDLL32.exe, procedure entry point_except_handler4_common could not be located in the dynamic link librarymsvcrt.dll. What should I do?

  I had starting problems, boot loop, I think it seems to have been resolved by using the last known good configuration, but I get this popup dialog box. I've not closed for fear that it will start XP looping again.

  Hi EddieBryan,

  1. did you of recent changes on the computer?

  2. do you have security software installed on the computer?

  3. when exactly you receive the error message?

  Method 1
  Check if the problem persists in safe mode and after return with the result.
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222

  Method 2
  If the problem does not persist in safe mode, then it is possible that some third-party programs installed on the computer is causing the problem.
  I suggest that you configure the computer in a clean boot state and check if it helps.
  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
  See section to learn more about how to clean boot.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353
  Reset the computer to start as usual
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click on Start , then click run.
  2. type msconfig , then click OK.
  The System Configuration Utility dialog box appears.
  3. click on the general tab, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Method 3

  If the previous step fails then I suggest that scan you SFC on the computer that will search the corrupted system files and try to correct them.

  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows XP installation CD.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  You are prompted to insert a Windows XP SP2 CD when you try to run the tool on a Windows XP SP2 computer system File Checker

  http://support.Microsoft.com/kb/900910

• Satellite L - starting problem

  I used my new Toshiba laptop about 6 months ago - no prpblems. These last days I have starting problems. I turn it on and Toshiba logo appears on the screen, and Windows does not start. Toshiba Logo remains on as frozen screen and laptop keyboard does not respond. I turn it back on works and that's okay - wimdows starts normally. Startup Repair does not detect any problems.

  What can be?

  Hi oktay,.

  What model of laptop you have exactly? I can t find this information in your ad.

  If the laptop hangs on the Toshiba logo, it has nothing to do with Windows and it s hardware related issue.
  Have you connected external devices? If Yes, remove them all and try to boot up your laptop.

• Win 7 intermittent starting problems

  My wife birhtday, I bought a new desktop PC 500-281 HP Pavillion through Win 7 clips in July of 2014. Intermittently the machine hangs at startup. Usually, he gets to "Starting Windows" screen and freezes, windows logo is not launched. When I shut off and restart, usually the screen asking if I want to start windows normally or start the Startup Repair utility. Should I choose one of these options and the machine works very well, sometimes I can shoose an option and the machine hangs again. Startup Repair shows no problem. When I'm on Windows I ran antivirus (AVG, McAfee, bitsMalware IO) analyses all upward with no problem. The machine is connected to ethernet (not wireless) a of the USB connections and: mouse, keyboard, external hard drive WD, printer Canon, Logitech webcam. All of this worked well on the old box. I have checked/updated all the drivers for external and all devices are updated. I checked the BIOS and Windows Connection Manager is the first start. This is a report of start-gel 60/40 at the moment and it happened that the staples of 14 days return policy. Any advice? My wife is extremely frustrated! (as a result so I am!)

  Hi Bob,

  I would test equipment (systems and components) to restarting your PC and pressing "ESC". A defective material is usually behind on a new PC erratic behavior. Despite a software driver problem which is very unlikely, component, causing this type of symptom can be the power supply. This point of failure (power) is not detected using HP diagnostics. If material tests pass and this isn't a software driver problem, through the process of elimination, it can be the power supply.

  In the start menu select F2 and run diagnostics.

  If all tests pass, try to use the PC with HP supplied only devices (mouse, keyboard, and Ethernet connection) to see if the system stabilizes.

  Let me know how it goes. We can try additional troubleshooting if the advice above does not help.

  Finally, you need to maybe to back up important data and do a factory restore. Then, run the system without installing any additional software and only HP devices connected.

  Always start problems? Now is the time to contact the HP Support.

  When our spouses are unhappy, we are miserable!

  Jaco

  I'm not an employee of ch *.

  "" "" Please give a "Bravo, Thumbs Up" If the notice is relevant or "accept as Solution" to help other users of the forum having a similar problem.

  HP products:
  810-150se office
  17 t - j000 Notebook
  H8 1380t CTO Desktop
  560z Desktop

• BHO. DLL & IE3SH problems on my computer starts?

  When I boot my laptop, these two buttons appear.

  1 / "this application has failed to start because BHO.". DLL was not found. Reinstall the application may fix the problem. The top of this box is titled - "unable to locate the ie3sh.exe component."

  2 / "a problem caused blocking the program works correctly. Windows will close the program and notify you if a solution is available. "The top of this box is titled -"IE3SH Application has stopped working ".

  Can someone please explain to me what they are and how to solve the problem?

  Hello

  You have this toolbar? Some programs you loaded probably included such as the MyTatoo
  FaceBook program.

  Fast Browser Search? -Check this box to get the uninstall instructions.
  http://www.fastbrowsersearch.com/FBS_Toolbar/help/helpUninstalling.aspx

  Look for Search Guard Plus (my web tattoo) and Search Guard Plus Updater(my web tattoo) in Control Panel-
  Programs and uninstall then with FastBrowserSearch.

  A good program to use to uninstall those is Revo Uninstaller, because it will help emlinate each of them.

  Revo Uninstaller - free
  http://www.revouninstaller.com/revo_uninstaller_free_download.html

  ---------------------------------------------

  After the foregoing:

  These and we may have to do even more if this does not prevent messages (they
  are boring and he had to be stopped, however, they are not dangerous).

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK

  Close IE

  Now download and run this program:
  
  BHOremover - free - standalone program, needs no installation, download and run - not all
  are bad, but some can cause your question (toolbars are BHO).
  http://securityxploded.com/bhoremover.php

  Save this file in the folder that you want to keep it because it is not actually installed. Is a standalone.
  You can also download run from the download folder or copy or move it to another folder of
  your choice.

  Download - SAVE - go to where you put it-right on - click RUN AS ADUMIM

  Look for any reference to a BHO object you do not recognize or work in it. You can remove
  everything you want them to be addons and you can always add them in the necessary cases.

  Also get Malwarebytes - free - use as scanner only. If you ever suspect malware, and that would be unusual with
  Avast and Prevx running except a low occasional (not much), updated cookie and then run it as
  a scanner. I have a lot of scanners and they never find anything of note that I started to use this configuration.

  http://www.Malwarebytes.org/

  Good luck.

  Rob - bicycle - Mark Twain said it is good.

• Error starting "C:\users\ \AppData\roaming\bjsila.dll startup problem.

  Original title: how restall appdata\roaming\bjsila.dll

  I had a virus and Malwarebytes anti-Malware module removed. and now when I start up Rundll box to say there was a problem starting C:\users\ \AppData\roaming\bjsila.dll.

  Hi Dimitridpa,

  This problem can occur because of a missing or corrupted Rundll32.exe file, conflict between software on the computer or due to infection by the virus.

  Method 1:
  Let's first virus scan run using the Microsoft Safety Scanner to make sure that the computer is virus-free.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note:
  1) the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  2) if you run the virus scan of the program which is infected with the virus will be deleted. Therefore, reinstall the program. Also, if files and folders are affected by the virus, while they might even get deleted.

  Method 2:
  If the problem persists, we will start the computer Safe Mode to check if the problem occurs in Mode safe. If the problem does not occur in Mode safe then you try affecting the computer in a clean boot state to find what startup item or service is causing the problem.

  Step 1: Start the computer in safe mode.
  

  Check out the link: Advanced options boot (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Step 2:
  To run minimum, follow these steps.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  N ote: after the boot minimum troubleshooting step, follow the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• L10 start problem - "SHDOCVW.dll is not found.

  When I start my laptop there is a message 'SHDOCVW.dll is not found' instead of icons on the desktop and I can't use my laptop more. Please help me cause I'm new user only. Thank you to.

  Hello

  Check it please this page http://www.pcfixtool.com/dll-errors/2339/2/required-shdocvw-not-found.html

  I hope this will help you understand what is happening. You can try to start the machine in safe mode by pressing F6, while the unit will start and try to install a new copy of the file manually. Check out this page http://www.ascentive.com/support/new/support_dll.phtml?dllname=shdocvw.dll

  You will find a brief explanation how to do this.

  Good luck!

• error message "urlmon.dll" start missing appears. I tried to restore windows from a bridge of restoration that has not fixed the problem.

  I used "Family Tree Maker 2011, connect to Ancestry.com, when the computer is locked.  Finally, I forced a reboot and many programs did not function properly.  Finally, I tried to do a system restore.  Some programs will not always work and I see an error at startup 'missing urlmon.dll error' message, msseces.exe system error reinstall the program. And missing error urlmon.dll system sidebar.exe reinstall the program.  I don't have the CD that Windows 7 is pre-installed when buying in January 2010.

  How to fix Urlmon.dll is missing or not found errors

• ".dll" and problems with my satellite A30 101 Power Saver

  Hello world

  Who can help me, I have two doubts. The first is, I don't always get on three messages when it starts. Will take you to my second problem. The power mangement. It is said 'E-Power Power Management' when I click ok, another message comes to say, '... No data. The Toshiba Power Mgmt system is no longer appearing in the Notification bar. It does not work.

  What can I do about these difficulties?
  Thank you

  Dejen

  Hello

  You forget to mention what are the names of the dll-files :). But still, even with the names he cannot drive anywhere. First suggestion: run a full! ScanDisk on your primary partition (usually drive c :)). The lost files could come from the fact that your data are damaged somehow. Second, try to uninstall the Add/REMOVE program section powersaver module in the control panel. After you have uninstalled, try to install again.

  Good luck

  Tom

• HP Pavilion a1730n starting problems

  I have Vista, I bought my computer two years ago (February 2007).  My computer does not start successfully upward.  My son bought an external hard drive, and apparently he was asked, "do you want to overwrite the boot sector?" he said yes.  It has also installed Linux on his external hard drive, because he wanted to use Linux everywhere where it can take his hard drive.  After the transfer of the data, he pulled his drive and turn off the computer.  When we tried to turn on the computer (without its hard drive is plugged in), what the computer could do on its own give us a text message BACK saying:
  
  Windows did not start because of a configuration of the disk of the computer problem.
  Could not read from the selected boot disk. Check the hardware path and startup disk.
  Please check the Windows documentation about the configuration of disk material and your reference manuals of the equipment for more information.
  
  I tried to plug his drive external back in and restart.  The mistake of text BACK we got was:
  
  Windows could not start because the following file is missing or damaged.
  Windows root\system32\hal.dll.
  
  I rebooted, you press ESC to get to the boot menu and tried to boot directly from the external hard drive.  It did not work.  I used a Linux disk, my son had and was able to start with it and see my files.  We have registered important files on the external hard drive to my son.  I put in my recovery disc and tried (to disk and then from the hard drive) repair the hard drive.  He told me that he could not fix it (twice).  I tried to use the restore disc to go back to a restore point.  He told me that there is no restore point.  I also tried selecting "last good Configuration known (your most recent settings that work)" in the Options Menu advanced (repeatedly pressing F8 at startup to get this menu).  It also did not work.  When I ran my program of recovery from my hard drive, I could choose HP Recovery or Vista Home Premium (recovered).  I chose HP Recovery to repair and restore attempts.  After these failures, I chose Vista Home Premium (recovered) and my computer was able to load my desktop, settings, and files successfully.  To start and use my computer as I always have, I have to use my recovery disc and go to the back door (so to speak).  I think I need to restore the master boot record, but nothing seems to be me getting there.  I may have to use BCDEdit, but I do not know what commands to enter at the DOS command prompt.  Suggestions?

  Try this .

  Be aware that if your son likes to play with dual-booting, you should probably buy him a pc to play with or you will find yourself in the same situation again.

• Cryptsvc.dll serious problem with Windows Update.

  Hello world

  (Vista Home Premium - 32-bit)
  I'm having a serious problem to Cryptographic Services which will affect my ability to update windows and use my PC. Since all April 24 Windows was not able to update and I noticed that my computer has been running extremely slow. Manager audit tasks revealed that svchost.exe ate about 50% of my CPU at all times.

  When I checked the services running in svchost.exe, I found that Cryptsvc.dll was eating my resources. I finished the process (svchost.exe) and my processor immediately returned to normal. I checked the wires all over the internet and while I see a lot of people have had problems with crytpsvc.dll I can't find someone who knows my specific problem.

  To start Windows Update, this svchost.exe also usually starts and causes the update of Windows hang saying something like "Download x updated. (Total 0Kbs, 0% complete.) and the progress bar continues to scroll, but nothing happens (I left this all night to test and it was the same thing when I woke up in the morning).

  The svchost.exe in question contains generally:
  CryptSvc
  Dnscache
  Tapisrv

  Check the Sysinternals Process Explorer process revealed that CryptSvc was eat the processing power. Also if I manually start this service via; Right click computer > manage > Services - my processor immedietly rises to 50% again.

  I ran many anti-spyware/virus controls, including Microsoft Malicious Software Removal Tool and they detected some small viruses ' but not managed to solve my problem. I tried to register the DLL in question, but I get the error:

  "" Cryptsvc.dll"module was loaded, but the DllRegisterServer entry point was not found. Make sure 'Cryptsvc.dll' is a .dll file or ocx valid and then try again. »

  What sounds horribly wrong to me.

  Unfortunately I can not format my PC because I don't have a copy of windows (my pc didn't come with one) otherwise it would have been my first step.

  If anyone could advise what newspapers you see to help diagnose it, I post them here (don't really know what to do more).

  Help would be appreciated, I'm getting sick of having to kill svchost every 20 minutes to keep my computer running.

  Hi Nick12321

  The link below shows you how to analyze the log file of SFC
  http://support.Microsoft.com/default.aspx/KB/928228

  Perhaps a better way to change the file is to use Notepad instead of modify it.
  Open an elevated command prompt, go to the folder where the sfcdetails.txt file is and enter
  Notepad sfcdetails.txt

  Copy and past the last 30 lines or so back here in the Thread (Post) - thanks
  Ken
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• wmploc.dll file problems

  When I try to play the wmp, I get the following message: the file wmploc.dll has a version number of 11.0.6002.1811 where 11.0.6002.18311 was expected.  Windows Media Player is not installed correctly and must be reinstalled.  When I try to reinstall, the system tells me that a previous version is installed, not allowing does not correct the problem.  What can I do?

  Hello

  After the WMP update you an error of wmploc.dll on the version number being
  incorrect - see this 1st
  http://support.Microsoft.com/kb/961047

  Follow these steps in the order given, even if you did a few before - please don't skip anything.

  Have you recently installed another player?

  Right-click on taskbar - process and see if WMPlayer.exe is already hidden. If so end
  treat this subject.

  --------------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ---------------------------------------------------------------------------

  Have you recently added stores or ANY application from Stardock?

  Using 64-bit Vista?

  Can you think of recent things you did in WMP which could be the cause? Do you have
  has added another player recently or an add-on for WMP?

  When I try to use Windows Media Player 11, the program does not start, or some UI elements
  are empty - a Mr Fixit
  http://support.Microsoft.com/kb/925704/en-us

  Maybe something here
  http://msmvps.com/blogs/chrisl/articles/17315.aspx
  and here
  http://msmvps.com/blogs/chrisl/Archive/2004/10/30/17399.aspx

  Check here the news of WMP11
  http://zachd.com/PSS/PSS.html
  ----------------------------------------------------------------

  Do this to reregister the Jscript.dll and Vbscript.dll files.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  type or copy and paste-> regsvr32 jscript.dll
  Press enter

  type or copy and paste-> regsvr32 vbscript.dll
  Press enter

  Restart and if all goes well, it will run now.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Office jet Pro 8610: how to eliminate a notice "start problem there... the module is not found.

  Recently, I replaced my old printer Officejet Pro 8600 with a new printer Officejet 8610.  Before you install the new printer I completely uninstalled the old printer sotware.  After installing the new software, the 8610 new works perfectly. My problem now is that everytime I turn on my computer, I get a useless message:-«Run DLL...» There was a problem starting c-program files-HP-HP Officejet Pro 8600-bun - HPstatusDL.dll... The specified module could not be found. This message has no effect on the functioning of the 8600 printer and is simply a nuisance. I closed the message when it appears. HOW CAN I GET RID OF HIM?

  Hello

  Open the file Explorer and paste the following text in the address bar, and then press ENTER:

  %AppData%\Microsoft\Windows\Start Menu\Programs\Startup

  Remove the ink monitor - HP Officejet Pro 8600 shortened alerts and restart your PC to confirm the message no longer appears.

  Kind regards

  Shlomi