303 disc error

Similar Questions

• Sony Handycam DCR-DVD305 Disc Error C:13:02

  I get disc error C:13:02 when you try to get the video on the disc. I can't get the drive to read in the computer, either. How can I see if there's some videos about it. It is a double-sided disc, one side work and not the other. It's very frustrating. Any suggestions?

  Hello
  Welcome to the Forums of Discussion of the user.

  Please refer to page 127 of the user manual and codes error of research by clicking on the following link:

  http://www.docs.Sony.com/release/DCRDVD105-205-305.PDF

  Try saving another disc using the camcorder and check if the camcorder works well. If you believe that there is a problem then contact the Sony Support by clicking here:

  http://eSupport.Sony.com/us/p/support-c... D305 & LOC = 3

• 'No disc' error on the Toshiba BDX1200KY blu - ray player

  (Sorry, there seems to be no jury of blu ray player)

  I bought this drive blu - ray 3 months ago and a week ago I had a 'No Disc' error when I tried to play a DVD. The machine plays all my DVDs without problems before if is not a concern for the region. Now, he will not play one of my DVDs and they are all clean and intact. However, she still plays my blu ray discs without any problem. I bought a blu ray disc lenses cleaning hoping that would solve the problem, but it didn't. So, I bought a DVD lens cleaning disc but being a DVD itself, she also returned an error of 'no disc '.

  The problem is that this is my second machine in about 6 months. Exactly the same thing happened with my previous Toshiba BDX1200KY and the electronic shop guys couldn't get out and gave me a replacement so it is very likely that the fault is mine.

  These machines have distinct popsicles for Blu Ray and DVD? Can someone suggest a solution. I smoke and I often stop the machine. It is pointles continuing until I have it worked.

  Unfortunately, it's a computer / laptop Forum options so I m afraid there is not a lot of people who can provide you with solutions

  However, I put t think that this player is equipped with different laser lens it s a goal that must manage all disks

  My player couldn't handle all the disks because the goal was dirty. I unmount the drive to access the lens and managed to clean it with a cotton tip and a little alcohol.
  So it helped in my case

• Windows xp update fails after reinstall OE discs error number: 0x8024400A

  Windows xp update fails after reinstall OE discs error number: 0x8024400A. Cannont even run Windows update at all.

  Hello
   
  To work on the issue, consult these links.
   

  Temporary connection related errors may occur when you use Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/836941
   
  Note: make sure that you enable the antivirus software, other security and firewall after the test programs.
   
  Caution:
  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  You can also designate a similar thread that addresses the question:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/how-can-i-get-Windows-Update-error-x8024400a/35ba7694-c9b2-4043-a4c0-777d4b7736dc

  Hope the information is useful.

• 'Burning disc error' when you try to burn a DVD

  Original title: I get the message "disc error" when trying to burn a DVD. I have recently restored factory settings and had no problem burning DVD previously. Any suggestions to fix this?

  I have a computer laptop advent 9117.

  Hi Adam,.

  What is the full and exact error message?

  I suggest you to refer to the article and see if it helps:

  Error message when you try to burn files on a recordable disc in Windows Vista: "there was an error burning this disc."

  http://support.Microsoft.com/kb/934544

  Let us know if it helps.

• How to fix still "no disc error"?

  When you try to start again CS5.0 I get an error box "Encore.exe - No. disc.  The box says "there is no disk in the drive.  Insert a disk in the drive\Device\Harddisk8\DR8.  There are 3 buttons: 'Cancel', 'try again' and 'continuous', none of them get rid of the error box and I can not open yet.

  I reinstalled again, no effect.

  I disabled a device in position 8 and the box error message changed to "there is no disk in the drive.  Please insert a disk into drive\Device\Harddisk4\DR4. "I have reactivated the device and the error box has returned to the original"... \DR8. " »

  Appreciate any help on how to solve this problem.  Thank you.

  -Dave

  Stan, John, I wanted to thank you for your help and the problem of 'no disc' is corrected.

  Here is the solution:

  -J' have been able to get in again by opening an old project that did not involve an ISO file

  -I didn't once again, I opened an old project that had an ISO on a HD file (HD auto changed its name since J: K: note, I had not been able to return to the J: indicator because the missing ISO file was not resolved then J: remained "in use" and unavailable)

  -In the old project, I changed the location of the ISO file of the drive J: missing on my C: drive using the Build menu

  The 'no disc' error went, that still works normally now.

  I hope this can help someone else.  Once again, thank you.

  -Dave

• Playing a disc error occurred - ctrl alt del to restart

  I have a user who has experienced this message on startup with their Dimension 4550:

  Playing a disc error occurred - ctrl alt del to restart

  Here's what I did in my troubleshooting with no luck:

  1 tried various other ide ribbon cables.

  2 removed all other readers of power and the motherboard with only the first master drive active.

  3 deleted all other drives in the bios, leaving only the primary master drive.

  3 replacement motherboard.

  4 here's the kicker.  I installed XP SP2 on a new fresh (Seagate 320 GB HDD) and after installation and first start, I get the same "disc error".  What are the chances that both disks have the same problem?  Enough of the ratings if you aske me.  So there doesn't seem to be the mother othe, cable or hard disk.  What could be the problem?

  I note that now when I boot from the XP cd it goes to a black screen after the "Setup inspects the current hardware configuration.  I am able to get past this screen if I remove the hard drive and install on another drive clean.

  What the hell is happening?  I'm usually skilled enough to fix these issues, but this one left me speechless!

  Thank you

  Tom

  
  

• Hard 301, 303, 305 on Presario CQ56 XR426EA disc error?

  Presario CQ56 XR426EA, Windows 7 starter edition, and then I upgraded to Windows 8 preview. It was after he began to hang. Then, I tried to use my recovery disk to recover but he then gave me error messages. Error of hard disk (301), (303) and sometimes (305). Whenever his commissioning, he stops and ask me to put in a floppy disk boot, and then press any key. Had tried to recover, when I used the recovery disks created from the system, it will then display a message that it failed.

  Hello:

  The hard disk of your PC decided to conk right now and needs to be replaced.

  If you decide to replace the drive, buy one of the same size in GB (or more) and you should be able to use the recovery discs to reinstall the operating system.

  If you buy a smaller drive size in GB, the recovery disks will not work.

  Paul

• disc error has occurred (press Alt + Ctrl + delete)

  Hi I use computer hp envy 15 laptop.

  well, when I neglected to test disc (perhaps so many times) black screen, I have error reading disk.
  So I tried to go into the bios and disk self-test.
  But he said 'rapid '. It came not the result that are fail or pass. only a single message 'quick' with 303.

  is it corrupted my drive?

  I hit F2 to check my departure upward and system and hard drive... control of start-up failed, HDD test failed and system has been adopted.
  These tests, I did on Hp advanced.

  So, I typed Esc to use the system restore when he was the starter.

  After 25 ~ 30 minutes pick it up hp had appeared.
  But the message says cannot find the partition.
  and I went to the next step to use recover.
  but I couldn't choose section retrieve (method two) I could choose only command promt. If I could do something for recover.because I didn't not hp recovery kit.

  I know it's really happened... can you help me solve this challenge...

  Hi SLOXI,

  Thank you for visiting the Forums HP's Support and welcome. I read your thread on your HP ENVY laptop and get a white or black screen at startup. Try perform a reset. When you perform a hard reset note remove all USB devices and remove cards memory card reader location. Disconnect all non-essential devices. If that doesn't help try to turn on the computer, on which you begin to press F11 repeatedly until the menu opens. You can do a System Restore. Here is a link to overheating as it may be the cause of the closure. If this does not help at the end of this document it tells you to do a test equipment.

  I hope this helps.

  Thank you.

• Satellite P200: Creator of recovery disc - error code: 0E01B5-26-2A030C00

  Hello

  I am trying to create the recovery disc for my new Sat P200 and it gets 1/3 of the way (1/2 way through the first disc) and displays an error message:

  "The question has occurred during the recording of the data on the disk. The current process will be stopped.

  An error occurred during the registration phase. Please check if the disc is scratched or dirty. If so, please try again with a new disc.

  (Error code: 0E01B5-26-2A030C00) »

  I tried twice on nine discs Verbatim DVD + R.

  Any suggestions as to what causes this problem?

  See you soon
  sophiajs

  I recommend you test different DVD media.
  Try DVD-R and from different manufacturers.

  From my own experience, not all CD and DVD is cared for and compatible.

  Greetings

• Recovery creator disc error code: 1100 8-48-00000002. Satellite Pro L300-15

  Hi all.

  Satellite Pro L300-152 of the Vista 32 SP2.

  This laptop was gave me to try to repair (another instance of stolen suicide Vista).
  After retrieving the system (no re - install wasn't necessary), I would like to create a disc of recovery for the owner.

  However, when I try to run the "Toshiba Recovery Disk Creator", I get an 'Error' window with the following message is displayed "an unexpected error has occurred. Exit this application and start it again. (Error code: 1100 00000002-48-8). Of course restarting the application generates another identical message.
  No one knows what could be the cause of this error and how do I create a recovery for this notebook drive.

  Take care of all.

  Mike

  Hello

  This error message usually appears because the non compatible CD or DVD.
  I think you should first check if there is an ODD firmware update.
  On the Toshiba European page driver you might find updates firmware for different CD/DVD drives.

  You should check your CD/DVD drive and a compatible firmware is available, then you need to update this
  If there is no update firmware, then you must try different discs from different manufacturers to create a recovery disk.

• 10-FC06-0002 - HARD drive recovery disc error load XP and Windows 7 very well

  OK, so I have a Toshiba laptop I want to restore because I had used it for school and he had a lot of things about what I didn't need and turned slowly. Rather than take things one by one, I thought it would be better to start from scratch. I jumped in the recovery discs, I created, restarted the computer and booted from the DVD. I have chosen all the settings to restore the computer to out-of-the-box settings and a time window that says «copy files please wait...» "After that the screen disappeared after 10 minutes or so, another window flashes on the screen for a split second (has not yet the chance to see what it was) and then an error window pops up error 10-FC06-0002. The only thing I can do is shut down my computer, and it does not start after that. After trying several times, I decided to come here.

  I know what you say. "Before coming here, search or something, there are tons of problems like that here." Well, I'm looking, and all the results told me to "make a copy of your drive and see if it works, if not its your HARD drive ' tried to make an exact copy of the disk using a tool to copy DVD of Google, no dice. I tried copy the files from the disc on the desktop on disk, did not work. Copied files on an old thumb drive and booted from it. The same problem. Make one. ISO disk image and it has burned, triggered the error as well. No matter how I try to run the restore files, the same error message prevails. This would point to the hard drive being broken, correct? This is where I get lost, Windows XP installs flawlessly and works faster that any other computer I used it, as well as Windows 7 beta does.

  -------

  Does anyone know a fix to this error so I can restore my computer? Should I order new disks of recovery at Toshiba? How much do cost?

  -------

  I created these recovery disks about a week after the computer is turned on for the first time. The only software on the subject was the preloaded software, Mozilla Firefox, and MSN Messenger. These two programs would have caused corrupted recovery discs to bring?

  THANKS FOR ANY HELP IN ADVANCE! : D

  -----------

  EDIT: Should probably tell you some info on the laptop. It is a Toshiba A200 - AH6, try to restore Windows Vista recovery disks created in the Toshiba Recovery Manager.

  Hello!

  To me it sounds like it's your Toshiba Recovery disk is noisy or something else. It seems that the disc can't be read properly.
  I doubt that s a hardware issue because you tried a XP and Windows 7 disk successfully.
  But as Akuma says that this can happen also due a poor quality DVD media.

  In any case, I think you need to order a new drive Toshiba Recovery directly.

  Finally and above all the software that you have installed (Firefox and MSN) didn t cause corrupted recovery disk. Theoretically, you can install what you want before you create the recovery disk. The recovery disk creator burning a disc bootable with the files in the folder HDDrecovery on the second partition. All programs that you have installed must be installed after recovery again.

  Good bye

• 03-EEEE-0000 Recovery Disc Error

  Bad recovery disk. I installed an OEM version and everything worked fine.

  Hello

  It may be more useful to provide more details on your problem.
  What cell phone do you have?
  When have you seen this error? He appears during the creation of the recovery disc or during execution of a process of recovery?

• Event ID 11,51, 57 disc error

  Hello

  I installed new seagate drive HARD for Windows Server Backup (full backup).  During the backup, I get errors in the event log and backup failed following.
  Event ID: 11 error - no disc \device\harddisk1\dr8
  Event ID: 51 - an error was detected on device \device\harddisk\dr1 during a paging operation
  Event ID: 57 - the system failed to flush data to the transaction log corruption may occur.
  Backup of the full server backup was successful.  This disc has become defective, so we used the new 1 TB external HARD drive.  This error occurring, replaced after new disk external hard drive USB 3.0.
  Help, please
  Thanks & best regards,
  Valentine's day

  Hello

  I suggest you to send your query to this link for assistance.
  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

• "No disc" error when you try to access external hard drive...

  I have a USB key that I use to record music files. Whenever I try to open it, but it was giving me an error that says:
  "Windows - no disk. . There is no disk in the drive. Insert a disc into drive \Device\Harddisk\DR21.
  DR numbers change of 5, 17, 19 and 21 now. I tried to change the drive letter from the center of disk management, but who doesn't. I also uninstalled the drive and then re-installed, also without success. I have not tried reformatting the drive yet, mainly because I don't have the ability to transfer files via. I am running Windows XP.

  Any help would be appreciated!

  Hello

  1. What is the brand and model of the external drive?

  2. do you update SP3 installed on the XP machine?

  3. have you made changes on the computer recently?

  Method 1.

  Step 1.

  Plug the USB device into another computer and check if the device works on this computer.

  Step 2.

  Plug another USB device and check if this device works on this computer.

  Step 3.

  You can connect the HDD on another USB port and check.

  Method 2.

  I suggest you follow the steps in this article.

  A computer that is running Windows XP cannot detect a USB flash drive, an iPod from Apple or an external hard drive: http://support.microsoft.com/kb/925196

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 how to back up and restore the registry in Windows

  My drive does not appear in Windows Explorer: http://support.Microsoft.com/kb/330140

  Refer.

  Advanced troubleshooting tips for General USB in Windows XP problems: http://support.microsoft.com/kb/310575

  Why my computer doesn't detect my new USB device when I run Windows XP: http://support.microsoft.com/kb/314634

  "There is no disk in the drive. Insert a disk in drive \Device\hard disk\Dr1"Error Message When you start your computer: http://support.microsoft.com/kb/330137

  I hope this helps.