Recovery creator disc error code: 1100 8-48-00000002. Satellite Pro L300-15

Similar Questions

• I have a compaq presario cq60 with vista which was able to start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. What can I do?

  I have a compaq presario cq60 with vista. Could not start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. I took the hard drive and installed in my office. Windows Explorer displays the main and recovery partitions.

  The primary partition has the following folders (including hidden & system)

  The recovery partition has the following (including the language files more)

  Someone at - it ideas why my laptop does not work?

  Thank you

  Greg

  Hello

  You press F11 on startup with a HP Compaq to start the recovery process.

  For problems with the recovery process, you will need to contact HP.

  BIOS problems:

  There are messages for the HP Forums for posters with similar errors:

  http://h30499.www3.HP.com/T5/notebook-HP-ProBook-EliteBook/notebook-HDD-problems-TEst-status-1-07-fail/TD-p/658902

  http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-dv8000-getting-1-07-fail-error/TD-p/883284

  http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-notebook-dv6000-1-07-fail/TD-p/1069457

  All the answers it point to a drive about to fail

  See you soon.

• How do I trouble and get rid of the error Code: rundll32.exe on my MacBook Pro?

  How do I trouble and get rid of the error Code: rundll32.exe on my MacBook Pro?  The heading reads as follows: of "http://Mac support1. com ".  I can't remove it from Safari.  It is also IMMEDIATELY said 'call APPLE to 1-844-335-2242 '.  I asked that this number.  Any help would be greatly appreciated.

  Choose force quit from the Apple menu, close Safari and then run it with the SHIFT key is pressed. If the message reappears, disconnect the computer from the Internet and close the tab Popup came.

  (138334)

• Satellite Pro L300 - where to get the recovery DVDs

  Hello

  Can someone help me please.

  My satellite pro L300 laptop has crashed I have repaired.
  Unfortunately, I have no operating system such as Windows Vista recovery disk.

  I can't find how to get these discs on Toshibe website or to be honest, that these disks are correctly as.

  Any help would be appreciated...

  Hello

  The laptop supports recovery of HARD drive option. This means that you can reinstall the image of Toshiba without using the recovery DVD. You must boot up the laptop and press the F8 key. The advanced boot menu is displayed and there you choose the first option to fix my computer. Then choose recovery Toshiba (last option) and start the installation.

  After this installation, you can use the Toshiba pre-installed called TOSHIBA Recovery Disc Creator to create an own recovery DVDs software of engraving

  But if you have formatted the HARD drive, the repair option won't work because the recovery folder has also been removed. In this case, you will not be abele to create clean restore DVD.

  But you can order it here:
  https://backupmedia.Toshiba.EU/landing.aspx

• Creation of recovery disks on a Satellite Pro L300 running XP pro

  Hello

  you want to create a recovery disc for my Satellite Pro L300. Operating manual provides instructions for Vista but the machine comes with XP Pro.

  Can anyone help?

  Can you please send the exact model number? I just want to check the specification.

  Anyway, as far as I know this model was supplied with preinstalled VISTA 32 bit BUSINESS and WXP recovery DVD. You always have this DVD?

  I m not 100% sure, but I think that WXP had no option for recovery disk creator. The whole story started with Vista.

• Satellite Pro L300 shows ACPI ATK0100 Kernel Mode Driver error

  I have a Satellite Pro L300 with Windows Vista and it has been fickle to say the least, making me restart the system several times.
  The last two times she since continued to come up with an error message saying "cannot open ACPI ATK0100 Kernel Mode Driver", and I understand that it is perhaps what is originally that there problems later.

  I tried updating the BIOS, reinstall the drivers and, seeking answers and, of course, reinstall the whole system, but I still get this message every time I turn on my laptop and I really don't want that it gives me the blue screen of death again - please help me!

  Thank you.

  Stand by.

  You ve done clean install of Vista with initial recovery DVDs and you get this error in any case (no additional software is installed)?

• Failed to retrieve the Satellite Pro L300 laptop using Toshiba Recovery Disk

  I have a Satellite Pro L300 Vista I'm trying recover using the recovery disk Toshiba official that the machine is not able to retrieve from the hard drive.

  The process gets as much as to start recovery utility and asking to select the language in the utility recovery which I emphasize English and then select next; It moves on the next screen, which is empty and then it just hangs.

  Any suggestions?

  You bought your laptop with the Vista version English?
  What language is marked before selecting English?

• Satellite P200: Creator of recovery disc - error code: 0E01B5-26-2A030C00

  Hello

  I am trying to create the recovery disc for my new Sat P200 and it gets 1/3 of the way (1/2 way through the first disc) and displays an error message:

  "The question has occurred during the recording of the data on the disk. The current process will be stopped.

  An error occurred during the registration phase. Please check if the disc is scratched or dirty. If so, please try again with a new disc.

  (Error code: 0E01B5-26-2A030C00) »

  I tried twice on nine discs Verbatim DVD + R.

  Any suggestions as to what causes this problem?

  See you soon
  sophiajs

  I recommend you test different DVD media.
  Try DVD-R and from different manufacturers.

  From my own experience, not all CD and DVD is cared for and compatible.

  Greetings

• Qosmio F30-112 - an error when you run the recovery disk, the error code is 4

  It appears whenever I put the toshiba recovery disc after loading of the VIRTUAL disk image

  "File\i386\System32\ntoskrnl.exe could not be loaded.
  The error code is 4
  Setup cannot continue. Press any key to exit. »

  Does anyone have a solution to this problem?

  Thank you...

  Hi ianzro,

  I m not very well why this happened, but to me it sounds like that files on Toshiba recovery disc can be read correctly.
  Maybe the disc is scratched or else

  You can reinstall Windows using a disc of Microsoft?

• Aspire 5733 during recovery W7, get error Code 0 x 3

  Initially, I had a boot disc error on my system when you restart it.  I tried a recovery after the recovery disc I created during the purchase of the computer.  I got a restore is not 0x45d error code.  I bought the new disc of recovery from Acer for $20 and got the same error.  I paid the $99.99 Acer support and now I'm getting Restore doesn't have a code error 0 x 3.  Now, the support team said I need a technician who has cost another $249. Is there another solution before I trash this computer?

  Hi Draw0

  It seems to me that if the hard drive itself is defective. Error code 0 x 3 occurs when a device or drive is disconnected or damaged. A hard drive damaged, does not accept the files because the system cannot locate the reader, or a fault it prevents! Basically, it cannot find the path that is needed, probably because the hard drive failed!

  Replace the hard drive and reinstall Windows from the recovery discs all should be well.

• Satellite A100 Recovery CD Wizard Error Code: F3-FFFF-0008

  I just bring a Satellite A100 and a problem by performing a full restore using the two supplied with my laptop recovery disks.

  The problem came after I deleted all partitions on the hard drive and then reformatted the entire hard drive.

  I get on the above error code, stated in the following format:

  ERROR: F3-FFFF-0008
  An error has occurred
  Please press [OK] to turn on the power the computer off.

  When I try to use the Recovery Wizard.

  I will be grateful if someone can help me on this one.

  I agree with the previous user. I think it's a matter of formatting of s.
  Try to boot from the original Windows XP CD. This would format the HARD drive again.
  Then use the Toshiba Recovery CD again!

  I noticed these problems installing several times and bad HARD drive format has been mostly a reason for similar problems

• Pavilion Media Center does not restart after the full system recovery. get the error code 0 x 4001100200001005

  Pavilion Media Center does not restart after the full system recovery. created recovery disks when purchased new. get the error code 0 x 4001100200001005

  Original title: recovery problem

  Hello

  According to the HP Support Forums, this error may be to do with the hard or for other reasons.

  You never have it replaced with a no HP bought in car?

  Read these threads HP on your error code:

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/recovery-disk-error-0x400110020000-1005/TD-p/22936

  http://h30434.www3.HP.com/T5/desktop-recovery-reply-only/trying-to-recover-an-old-PC-error-code/TD-p/964509

  If the original hard drive, press F11 at startup to start the process of recovery partition HP, did you recovery disks of.

  See you soon...

• W550s error code POST 2100 with Samsung 850 Pro 1 TB

  Someone had the POST 2100 error code after I installed a Samsung 850 Pro in the W550s?

  I had this happen when I tried to install the Samsung and did a restart hot. The machine should start properly if I completely stopped down but not with reboots.

  The hotfix that is described in the following link corrects this problem for Samsung 850 Pro 1 TB?

  http://support.Lenovo.com/us/en/documents/ht082504

  Using Acronis True Image instead of data Migration Samsung worked like a charm. Samsung costs me a lot of time and frustration with their migration software.

  They should be upfront with the fact that SDM v2.7 does not work with a Lenovo W550s. They are stuck in NIH (not invented here).

  Moreover, I fArrondi that Acronis True Image can cause serious system problems if allowed to run at startup and run in the background. It causes the system freezes in one of my computers. I used Windows 7 msconfig to disable at startup and it will run only when I need it.

• 100000d error code 1, parameter1, parameter2 00000002, parameter3 00000001, parameter4 b6f64c73 f6f34599.

  No idea why the above error code caused a blue screen?

  0xD1 bug check code
  http://msdn.Microsoft.com/en-us/library/ff560244 (v = VS. 85) .aspx

  Codes check Bug always are the same i.e. 0xD1?

  Is the error occurring during the boot process, or later?

  The error occurs in safe mode?

  Is your version of the Windows XP family or Professional Edition?

  What is your computer makeand model?

• 0x8007045D error code when you install Windows 7 Pro 64-bit

  I get an error 0x8007045D code when installing Windows 7 Pro 64 bit on the same same MSI 970 Gaming (AMD SB950 Chipset 970 +) motherboard, even OEM Win Pro SP1 7 X 64 dvd, the installation on an EVO of 840 Samsung 250 GB SSD.

  16 GB of Ram (4 GB X 4 stix. Ran this OS on this forum for a year, trying to do (was) a clean install. I am puzzled, never had a problem like this.

  I was the installation of the operating system, and you're right, when he was on the 2nd works. He remained at 0% for a while then I get this error message "Windows cannot install required files. Make sure all files required for installation are available, and restart the installation. 0x8007045D error code.

  Someone at - he already had this?

  Any help would be appreciated.

  Thank you

  Try to reduce the amount of RAM installed on a unique key and try again.

  If you have several hard drives attached, disconnect all except the disk target hard.

  If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.