309g are all cartridges to be installed when the don't print as black?

Similar Questions

• updates are planned in order to install when it updates and I made it impossible to get on internet explore? __

  updates are planned in order to install when it updates and I made can not get on internet explore

  Hi Marc,

  • You receive an error message when you try to access the internet?

  I suggest you to reinstall the update from Windows update and reproduce the error and check the update is the origin of the problem and after return.

  Step 1

  You can check which was the update has been installed on the computer and after return. To view the update history, follow the steps below:

  a. open the Control Panel, select display by the small icon and click the Windows Update icon.

  b. click on the link to view update history.

  to view the details of a single Windows Update. Select and right-click on a Windows Update list, and then click details.

  Step 2

  You can also access see installed updates on your computer and check the updates have been installed on your computer until this problem started and after return to the update's KB number.

  To do this follow the steps below:

  a. click the Start button.

  b. click Control Panel.

  c. click on programs and then, under programs and features, click on view installed updates.

  Uninstall the update has been installed before this problem began, view installed windows updates and see if it helps you to solve the problem.

  Step 3

  You can try to download the stand alone, updates and try to install it and check if it helps.

  To download the standalone version of windows updates follow the steps below:
   
  a. take note of the update with the Ko only when your computer tries to update and install it.
  b. visit the following Microsoft Web site: http://www.microsoft.com/downloads/Search.aspx
  c. search by downloading the update.
  d. save it on the desktop.
  e. try to install it manually.

  Step 4

  You can also try self-test built in Windows 7 Internet Explorer troubleshooting after you install the update and check if that helps you solve the problem.

  To run the Internet Explorer troubleshooter, follow these steps:

  a. close all programs.

  b. Click Start and then click Control Panel.

  c. under system and security, click on find and fix problems.

  d. in the left pane, click View all.

  e. click Internet Explorer Performance. This opens a new window.

  f. click Next.

  (g) the resolution of the problems run and try to solve all the problems identified automatically. Click Close.

  After the store has run successfully, check to see if you receive the same error.

  Also access the link below and follow the steps to solve the problem with Internet Explorer.

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-solving-problems-with-Internet-Explorer

  Hope this helps and let us know the result.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• There are two screens (split screen) showing when the computer is turned on.

  There are two screens (split screen) showing when the computer is turned on. How can I delete one side to return to a view?

  Hi Ikthomas1,

  When did you start in this topic? Were there recent changes to the computer like installing new hardware, software or updates? If it is a recent issue, follow the steps in this document to perform a System Restore. This will restore your comuter up to a point located before the show.

  If you have antivirus software installed, run a scan of filling. You can also use Microsoft Security Essentials to scan your computer.

• Black ink cartridge 564XL will work in the 6510 AIO printer?

  Black ink cartridge 564XL will work in the 6510 AIO printer?

  A cartridge of the same size that the color cartridge would be the photo cartridge.  This is not interechangable with the black cartridge, you will need a black cartridge.

  document here can help.

• Is it possible to have windows to automatically select a spare printer by default when the selected default printer is off line?

  I use a laptop and move between two locations each with its own printer.  Whenever I move, I have to change the default printer by opening printers & faxes from the control panel.  Is it possible to have windows to automatically select a spare printer by default when the selected default printer is off line?

  Hi Tom,

  If the default printer is not in offline mode, it will detect the different printer but it will not be a default one.

• All cartridges must be installed in order to print (Photosmart 7520)

  Hello

  My photo cartridge is damaged (ink constantly leaks) and so I have deleted and need to go buy a new one.

  The printer will not print anything while this cartridge is missing?

  Frustrated!

  Hello

  Many printers now does not print anything if missing ink cartridges / toner (s). They will be shut down during the heating of the process. For printers that have individual ink cartridges, they normally stop when an empty ink cartridge.

  Kind regards.

• Why, after I installed the CS6 update, are all old CS3 applications always in the Applications folder?

  Can I remove / uninstall the older CS3 applications?

  New versions of Adobe software does not install on top of older versions. They are installed side-by-side, each version in its own folder.

  You can have several different versions of the same software installed at the same time (I have CS3, CS4, CS5 and CS6 available), in case you have old plugins is not compatible with newer versions of Adobe or you simply want to maintain access to older versions for troubleshooting forum or another.

  If you are sure that you will never have need of the CS3 version again, you can safely uninstall them.

• Language office (and all menus) are all in strange symbols, even if the language selected is English

  I have a Vista Home Premium computer laptop (Toshiba Satellite) which shows strange lines and brands for all of the words on the desktop and menus. I guess it could be a different language, although it looks more like mutilated. I managed to check the regional/language settings (was not easy) and English is selected. Anyone know what is happening and how to fix this without reloading the operating system?

  Hello toryander,.

  Thanks for posting on the Microsoft answers Community Forum.

  When the problem started happening with the display of strange symbols and marks in your Vista Home Premium?
  What has changed in your environment? Did you install a new program or install an update from Windows?

  Have you tried running Safe Mode to see if it'll happen here?

  If you know when the problem started, you can check and see if you have the system restore back to an earlier point in time. Note: System Restore does not save or delete your personal documents. This means that a document created and saved today is not deleted if you use the system restore. Only some system files and settings are changed when you perform a system restore.

  Click the URL below to review the steps on the system restore.
  936212 KB - how to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  http://support.Microsoft.com/kb/936212 use system restore to undo changes
  To be sure, save the files before you restore to an earlier point. To restore your system to a previous restore point:

  1. Click Start
  2. Point to all programs
  3. Point to Accessories
  4. Point to System Tools
  5. Click on the system restore and click on the Next button
  6. Select "choose a different restore point" and click the Next button
  7. Select the time of the desired date and restore point description.
  8. Click the Next button.
  9. Click Next to start the restore process.
  10. Click Yes in the confirmation message box that appears.

  The computer shut down and on again automatically once the recovery is complete.

  Please try the suggestions and reply back with the results and let us know if you need help or if this solves your problem.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Icons are not displayed properly in Gmail when the zoom level is between 150 and 200%

  Icons in Gmail will not correctly displayed in Firefox at all zoom levels. The problem does not occur in less than 150% zoom levels or levels of zoom to 200% or more. Levels of zoom between (150%) correct icons are not displayed until the mouse passes on their location.

  The attached pictures show screen shots to 140% (OK), 150% (problems shown, before moving the mouse), 150% (problems shown, after moving the mouse), 190% (problems) and 200% (now OK again)

  The problem was not resolved by disabling extensions, go to mode without failure or update Firefox.

  Firefox and extensions/plugins are all fully patched.

  You can try to disable hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  You will need to close and restart Firefox after enabling/disabling this setting.

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
  • https://support.Mozilla.org/KB/upgrade-graphics-drivers-use-hardware-acceleration

• NEITHER 9481: Why dose the relay turn off all channels once every time when the vi is executed?

  Hello all, I use cRIO 9025 and NI 9481 to develop a program. The relay is used as switches.  I designed it, is that when I run the vi, the channels of the relay are all on. When the port of entry of the digital input/output module gives a signal to the relay, the relay channels is disabled. However, whenever I run the vi, the relay is disabled once and then trund once again. May I ask why is this happenning? I guess that's because the default state of the relay is disabled. Is there a way to fix this?

  Thank you very much!!

  All the relay modules are like that and there is nothing that can be done as far as I know. Electromagnetic relay are generally loaded spring and holding (switch closed) by a voltage sent to the relay. They will turn off when restart you on the relay controls. You can set the State of the relay on real as the first thing when you start your VI, but beyond that you would have to solve your electrical problem, control switching relay at a constant voltage during the startup of the program. However, in most cases it would be risky and unreliable. However, there are many different types of relay and you did not specify that you are using.

  See basic operation section, section of this article to read on how to relay themselves by default to the State of open circuit:

  http://en.Wikipedia.org/wiki/relay

• EMERGENCY SITUATION! All sites to content disappears when the publication in HTML format

  When the publication in HTML format, ALL the content on the site (including the content of nav and footer header) disappears. Only the image browser is visible. http://www.brainstormsuccess.com

  I'm tired of Muse. Cache of the object of dumping. Restarted. Have tried to create new layers and copy and paste content. Nada.

  Some see: MuseJSAssert: error by calling the selection function: TypeError: object [object Object] has no method 'toBrowswerWidth '.

  PROBLEM SOLVED: Truncated line of Java script in the header.

  Thank you Aish. We found a truncated line of java in the header. Once removed the pages worked well. Interestingly, this broken piece of java was part of versions previous to site but only later had problems.

• 6520 photosmart all-in-one: can't get Photosmart 6520 to print in black and white only reliable

  I'm trying to get the 6520 Photosmart of HP all-in-one to print only in black and white. I followed the instructions in the manual (go to the preferences of the printer by selecting "Black ink" only 'Print in grayscale,' hit 'Apply' and 'Send'.)

  Now, if I do a table in the word processor Open Office and fill the cells with different colors, they print in black and white. Bonus. This is what I want. However ... When I print a page of Open Office spreadsheet (the ultimate goal), there are all the cells, printed in color of life.

  That is what it is? How can I fix?

  Afternoon @MSWS,.

  I can help you with the printing settings in Open Office.

  It seems that this program has its own options that can bypass the default print settings.

  I found this page of support which may help you with the settings. OpenOffice - control print  

  Thank you

• All-in-one HP Deskjet 2540: How do I set the default to print in black and white only

  The manual says this, but it applies to a PC and I have a Mac:

  "If you want to print a black and white document using a black ink only, click on the Advanced button. Printing from the drop in grayscale, select black ink only, and then click OK. »

  Someone knows how to set the printer to print only black & white for a Mac?

  As an accompaniment, there are security settings that must be configured to reduce the risk of access remotely for the printing device?

  Thank you

  Hello
  Follow the steps below to print using black ink only:

  1. from the application used to print, click the file menu and select print.  The print window is displayed.
  NOTE: The print window might be minimized: click Show details to display all available parameters.

  2. to access the color options, click in the area of selection below, listed as the name of the program (e.g. TextEdit)
  Will appear as Copies & Pages within Microsoft Office applications.

  3. Select Type/quality paper in the menu dropdown.

  4. click the triangle next to color Options of spending parameters.

  5. set the color to grayscale field.

  6. set the Mode to grayscale in black cartridge only.

  You can save the settings for later use by clicking preset > save current settings as preset... Once you print using the saved preset will remain by default up to what we will choose another preset.

• Windows 7 and install/recognize the problems of printer HP LaserJet P2015 error - USB Device not Recognized One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.

  Title: Windows 7 and install/recognize printer HP LaserJet P2015 teething problems...

  I have a dell inspiron that was originally windows Vista and I changed to windows7.  I have a LaserJet where I work, a HP LaserJet P2015 printer and when I plug in the USB, it says (peripheral USB not Recognized One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.

  How and what should I do to get the printer going or to get the computer to recognize.  Installation CD will not work and I looked online and downloaded drivers but still the same thing.

  Hi LOliver,

  Method 1: Run the hardware and peripheral troubleshooting tool and check if it makes a difference.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: Disconnect all USB (Universal Serial Bus) devices connected to the computer (unless your mouse and keyboard). Connect the printer and check to see if the problem persists.

  Method 3: Connect the printer to a different USB port and check.

  Method 4: Reinstall the USB (Universal Serial Bus) controllers.

   First of all, please disconnect all USB devices and then perform the following steps:

  (a) click on 'Start', type device manager in the search bar and press "Enter." If necessary, click on continue.

  (b) in Device Manager, double-click to expand the "USB Bus controllers", right-click on the "host controller", click "Uninstall" and click "OK".

  (c) repeat step 2 to uninstall all items under 'USB Bus controllers'.

   

  Then, restart your computer and windows will automatically reinstall all USB controllers.

   

  HP printer drivers- ensure that you download the driver appropriate for your device model package.

   

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• All documents automatically sign and date the date gets printed on top and the signature is clear. What could be the problem? I've tried everything.

  I sent to automatic signing. The are signed and dated and return. When I try to print the signature block print very well and the date is printed by a form number in the upper part of the form. I have re-installed and tried to implement everything. If I send the form to someone else this fine print.

  Help, please?

  Hi brucec82352169,

  Please try to print as image PDF print as image. Adobe Acrobat, Reader, check to see if that fixes the problem.

  Kind regards
  Nicos