32-bit or 64-bit on Win7 with G550

Similar Questions

• LV2010 32-bit under Win7 64 bit - SCC provider not found

  Is there a work around to use a provider of Source control with LV2010 32-bit under Win7 64-bit?

  It seems that the VI 'Raspberry find all Providers.vi' does not work with the OS 64-bit due to registry access restrictions.

  The Key.vi of open registry is not able to analyse below HKey SOFTWARE but the full path is SOFTWARE\SourceCodeControlProvider\InstalledSCCProviders.

  Best regards

  Christian

  By reading this thread http://forums.ni.com/t5/LabVIEW/LabVIEW-32-bit-and-Vista-64-Registry-Read/m-p/978676#M438513 , I was able to get a work around.

  I replaced the version registry key VI opened by the ".vi ACI - WinAPI - open registry key (WOW64 support)" within raspberry NI find all the Providers.vi and now I can choose the SCC provider installed via the LabVIEW IDE-tools >-> Source code control-> configure source control.

• Networking a laptop 64 bit Windows 7 with a desktop computer Windows Vista 64-bit

  I have a Dell desktop running 64-bit Windows Vista with a USB connected HP Photosmart printer operating system.  My wife used to have a laptop with an XP operating system and we have had no problem sharing the printer.  Now she has a laptop (HP) laptop to Windows 7 64 bit and fails to print.

  His laptop is connected wireless to Verizon FIOS router (wireless-g, I think).  I am connected by ethernet.

  If I look at a map of the comprehensive network of my Vista PC I can see his laptop and explore appropriate records of (public) level on his hard drive.   Sharing my Vista PC and are discovery options: network discovery:; File sharing:. Public folder sharing:; Printer sharing:; Password protected sharing: Off; The media sharing: Off.  My Vista shows the home network as a WORKING group.

  I use McAfee SecurityCenter and when I open the McAfee network map it also shows my wife's cell phone with its IP address.

  On my wife's cell phone two PCs appear on the map of the comprehensive network of the window and it shows my PC IPv4, IPv6 and MAC address, but if I try to 'Open' from my PC to the icon on the map, I get an error message suggesting I be spelled the name wrong or there is a network problem (error code 0 x 80070035 the network path was not found).  I ran the diagnostic of the error dialog box and he suggested to "make sure that the device allows incoming connections for printing and file sharing", the windows firewall settings.  Its network card qualifies to the network TPEN1, identity, assigned to the Verizon router. It shows his laptop connected by a dotted line (wireless)? to TPEN1 which is connected to a switch.  My PC is also connected to the switch which in turn is connected by a bridge to the Internet.  Options advanced sharing his PC for the home or work (current profile) are set on: turn on the discovery network. Enable file sharing and printing; Turn on sharing so anyone with network access can read and write files in public folders;  Media streaming is disabled; Use 128-bit encryption to protect file sharing connections (recommended); Disable password protected sharing;  Use the user accounts and passwords to connect to other computers.

  Its Norton Internet Security Network security map shows my PC as being in line with trust to full trust level.  It also shows the Swith and 2 generic devices with Shared Trust.

  So... anyone have any suggestions?

  Hello

  Maybe this can help.

  - ---------------------
  

  This message looks like a long history because I don't know what is the level of knowledge of the user, and what has already been done.

  The info goes through the motions of the configuration and verify most of the common aspects of the functionality of Windows OS' LAN.

  ----------------------

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Since you have a network with Win 7 and the other version of Windows, you must configure Windows 7 as work network.

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If necessary check specifically Permission/security settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  Please note that the users and groups listed on the screen shoot are just an example. Your list will focus on how your system is configured.

  ---------------------

  You should consider that many times the final solution could involve total uninstall of the 3rd party security Suits.

  In this case, you can be set at the same level with installing Microsoft Security Essentials which are used in the applications of a native Vista/Win 7 firewall and AntiVirus/AntiSpyware.

  http://www.Microsoft.com/Security_Essentials/

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• All 32-bit applications crash with error 0xc000005 after windows Server 2008 R2 backup

  Hello world...

  I am in a big mess... and really need help!

  I did last night a Backup windows... but one of my users were connected to the server works with applications...

  and this morning No 32 no bits applications... same installer...
  the 64-bit application works very well...

  Others or generating an error 0xc000005 and stop...
  failing Ole32.dll module...

  And I'm sure that the backup is reliable, even if the backup of windows said it was successful...

  I tried to restore only the apps files... but it seems more complicated than that...

  If anyone has an idea...

  Hi, Emeric,.

  Thanks for posting the question on Microsoft Community.

  According to the description, it seems that 32-bit applications crash with an 0xc000005 error code in Windows Server 2008.

  As the question more appropriate forums Technet, write the topic in this forum for better support.

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

  Using the windows-related issues feel free to post on Microsoft Community.

• upgrade to Windows 7 64 bit Ultimate Edition with the new installation of windows XP

  I plan to upgrade to Windows 7 64 bit Ultimate Edition with the new installation of windows XP

  my PC configuration is like below:

  Card mother Intel DH61WW
  Processor Core I3 2100 3.1 Ghz
  4 GB OF DDR3 RAM
  Seagate 1 TB SATA HARD drive
  OS: Microsoft Windows XP Professional SP3

  I run Windows 7 upgrade advisor in which some results below the incompatibilities:

  Intel (r) 6 Series / C200 Series Chipset Family SMBus Controller - 1 22
  Unknown Intel we have not the compatibility information about this device.
  Intel 82579V Gigabit Network Connection
  Unknown Intel we have not the compatibility information about this device.
  Realtek High Definition Audio
  Realtek unknown we have not the compatibility information about this device.

  Here's my conceerns:

  What needs to be done to overcome the problems of incompatibility?
  Do I need to download new software files compatible for windows 7 and then install
  for example VLC media player, Skype, MySQL Server I am running
  or currently existing files are compatible to install with Windows 7?

  Would I be able to upgrade to windows 7 without any problem and safely?

  Could you please help me with the questions above?

  Please correct me with additional suggetions that I may have missed with.

  Looking forward to hear from you

  Thank you

  You understand that you will not be able to upgrade Windows XP to Windows 7?  He will have to do a clean install.

  The Council supports Windows 7, you can get the drivers here (the chipset drivers should be the first drivers you install after installing the operating system.)

  John

• Cannot install SP2 on Vista Home Premium SP1 32-bit laptop - fails with error 0x800b0100

  Cannot install SP2 on Vista Home Premium SP1 32-bit laptop - fails with error 0x800b0100

  Cannot install SP2 (KB948456 - X 86) on a laptop Vista Home Premium 32 bit SP1 with all updates of Windows installed.  Quickly fails after it starts with error 0x800b0100 in the system log.  It's a fully verified SP2 full download.  I did a full chkdsk /r who fixed some issues.  Removed AVAST.  A running Fix It tool that fixes the problem with crypt services.  Scanned for malware with MRT.  Scanned for malware with MalWareBytes.  Scanned for rootkit with the McAfee tool.  Run the sfc/scannow, that signals mistakes.  The CBS. Partial contents of the LOG file (see KB972036):

  2014-03-18 11:59:36, CBS NonStart info: success, start, treatment not required, as expected.
  2014-03-18 11:59:36, info CSI CSI 3222024 (0x00312a08) store initialized 00000005
  2014-03-18 11:59:36, CBS Session info: initialized 30360259:262197728.
  2014-03-18 11:59:37, info CBS SPI: Parent KB936330 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18000 to SP2 package with install state 7
  2014-03-18 11:59:37, CBS Session info: 30360259:262197728 finalized.  Reboot required: no
  2014-03-18 11:59:37, CBS Session info: initialized 30360259:266957728.
  2014-03-18 11:59:38, CBS brand store corruption flag because of package info: Package_for_KB972036 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.2.0. HR: 0x800b0100
  2014-03-18 11:59:38, error CBS SPI: (CSPICbsClient::EnumPackages:156) cannot open the package hr = 0x800b0100
  2014-03-18 11:59:38, error CBS SPI: (CSystem::EnumerateCbsPackages:313) could not complete CBS package list hr = 0x800b0100
  2014-03-18 11:59:38, CBS Session info: 30360259:266957728 finalized.  Reboot required: no
  2014-03-18 11:59:38, info CBS SPI: could not enumerate the packages CBS
  2014-03-18 11:59:38, error CBS SPI: (GetLatestVersionFromCBSStore:135) ATL exception hr = 0x800b0100
  2014-03-18 11:59:38, error CBS SPI: (CSPCInstallTask::ApplicabilityScan:712) could not get the latest version of VistaSP2.

  KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.0.18005 hr = 0x800b0100 store

  System will not install KB972036 - States does not apply.

  Referring to 956702 KB notes that the http://go.microsoft.com/fwlink/?LinkId=167357 link that needs 32-bit is 64-bit.  In addition, it specifies SP2 - which obviously I do not have.  But I manually downloaded the apparently correct tool and ran it - get does not apply.

  Hi John,.

  Apologize for the delay in response. Please try the steps as described in the following article:

  Windows Update error 800b0100

  Back to us for assistance.

• Several activations phone for the upgrade (reinstall) Win7 32 bit to Win7 64-bit, then run the patch to get Win10 64-bit? Adviser says no need!

  [Subject title changed to take account of the answers and expert advice, the original title was 1 or 2 time phone activation? Failure of the mobo, replace & reinstall Win 7 32 bit (1st time), reinstall as Win 7 64 bit (2nd time?)]

  My mother Office card failed recently, it is installed with retail 32 bit Windows 7 Home Premium and family (3 users) Office 2010 package. Two Microsoft products have product keys.

  My understanding is change of motherboard: computer transfer. While the retail Windows 7 allow to reactivate by phone, but to reactivate Office 2010 will depends on a license agreement (which I haven't checked: 2 installations on computers, died 1 single installation still work left.) Will need to contact the family member to read).

  My 2nd understanding is I can try to connect my hard drive to a new motherboard and let it go through for direct start startup repair. Is better because I don't have data because of the sudden failure of the motherboard (for example bookmarks for the browser explore, can only log into the existing facility backup).

  But being upgraded to the new motherboard (and the new quad core processors), certainly I wouldn't keep running 32-bit system in the future.

  I would reinstall under Windows 7 64-bit later, then a free update to Windows 10 64-bit. (Windows 7 Upgrade Advisor reported that I can not direct implementation installation upgrade from 32 bit to 64 bit Windows 7. Must pass through the new Setup again.)

  Whereas for the 32-bit Office 2010... I could continue to use it as it is if it is allowed to reactivate on new motherboard.

  Now, my question: to reactivate Windows 7 32-bit (and 32-bit Office 2010) with phone, later when I finished the backup of the data and do clean install Windows 7 64 bit (and 32-bit Office 2010), do I need to do to activate by phone, again? Or simply key in the original product key from the license of Windows 7 and Office 2010 already recognized the new motherboard?

  If I need do activate phone 2 times, I might as well direct own to install 64 bit Windows 7 now (despite the loss of some data).

  There is nothing worse you could install on your system than McAfee.  If you have it installed I would like to reinstall Windows it's a Goner.  The uninstall tool likely will not solve everything.

  I'm not "understand why, you need to install Windows 7 64-bit just to make a less than 10 Windows upgrade when you have a much better install directly Clean install Windows 10 Upgrade , then activate directly with the product key Windows 7."

  As to reactivate Office, wait until you get 10 windows up and then make the activation of the phone to help build just to install an Office (or 3 If you have a 3-pack of office, also).   Otherwise, you will have to redo the reinstallation of upgrade.

• All of a sudden my 5.7 LR on win10 64-bit start fails with the error message something like "error reading from the cache of the preview... Please restart." reboot, repair, reinstall, or rename SLCache helps to repair.

  All of a sudden my 5.7 LR on win10 64-bit start fails with the error message something like "error reading from the cache of the preview... Please restart." reboot, repair, reinstall, or rename SLCache helps to repair.

  

  Hello

  Greetings!

  Close to Lightroom.
  Navigate to the location where the catalog is present (default value is within the pictures folder lightroom file)

  And delete the file previews.lrdata.

  Note: do not delete the catalog with the extension .lrcat file.

  Concerning

  Jitendra

• Photoshop Extended CS 04:32 bit & 64 bit stopped working with a 131:4 error

  Dell XPS 720 Quod processor 8 GB of memory running Windows 7

  Two Photoshop Extended CS 04:32 bit & 64 bit stopped working with a 131:4 error. who said to restart to solve the problem. After several attempts to restart the computer, I got the same error message.

  I was updating all of my Adobe software in order to tackle a problem with Adobe Media Encoder: when I sent a stream of time line to be converted into an AVI of Premiere Pro CS4 to encode the window appeared & hung.

  I want to first address the problem of Photoshop. How should I proceed?

  Use own writing unified CS3/CS4/CS5, reinstall from scratch. Sorry, but obviously an update failed missed your licensing system and there is no other way to get it back.

  Mylenium

• I'm trying to restore my win7 with HP USB recovery Flash Disk, I get the following two messages

  I'm trying to restore my win7 with HP USB recovery Flash Disk, I get the following two messages:

  "Do not create C:\Users\User\AppData\Local\Temp; c:\arc\01Script\FormatUFD.SP' and the messsage "Fail to create.

  How to port HP_recovery in car to my flash drive?

  Windows 7 x 64, HP G62-144DX

  Hello:

  I can't help you with this specific issue, but if you can get it is resolved and you can read the product key 25 character Microsoft Windows on the bottom of your PC, do your own installation of W7 media to reinstall W7.

  Here's how:

  If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

  Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

  Or use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. Link and instructions below. You need a 4 GB flash drive to use the USB compilation method.

  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool

  Use 25 characters on the PC product key to activate the installation.

  The key will activate a 32 or 64 bit installation.

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  Paul

• Win7 with FF 31, smart phone 4.2 with FF letest ver. using the same account with 1 email. But the phone is not getting any collar, Bokmr, etc.

  Brother.
  We use win7 with Mozila 31, 4.2 with Mozila Android smart phone latest google app store on 04/10/0214. Using the same account with the same email. But the phone does not get any new information of win7 with Mozila 31. PL z give useful information.

  Hi w3ur_team,
  Thank you for your question. I understand that there are two features that are documented in the sync account. However the Android is not synchronized.

  There are two places we can check:

  1. In the Android settings, under accounts is the Firefox Sync or Firefox Sync (discouraged) joint account?
  2. Credentials work on accounts.firefox.com on the mobile device and are there any error messages in the synchronization of the settings menu > sync?

  See also Firefox Sync troubleshooting and tips for more troubleshooting steps.

• Cannot install win7 with USB

  I can't install win7 with my key USB got the error msg like "Setup could not create a new partition or system to locate a system partition. see logs of installation for more information". don't know how to go further. any ideas? and the partition type is "primary". other partitions are of type "logical." help me pls...

  Try the following:
  Boot from the Windows 7 DVD
  Click Install now
  Accept the license agreement
  When the option is displayed to select a type of installation, click (Custom advanced)
  Click on drive Options
  Select the disc/s click on Delete
  Click new
  Click on apply
  Click OK
  Click Format, and then click next to proceed with the installation

  If the problem persists, you can reinstall Windows XP, update your BIOS then try the installation again. Its possible that you have created the bootable USB key is damaged, try to create another copy, or try to install using a dvd player external usb.

• Not realistic Win7 with View Composer?

  If View Composer creates clones based on a snapshot, but does not change the SID or (especially) the CMID.

  KMS is the only practical solution in VDI for the linked clones license.

  Without changing the CMID, KMS will not work.

  http://blogs.technet.com/ASKCORE/archive/2009/10/16/KMS-host-client-count-not-increasing-due-to-duplicate-CMID-s.aspx

  So, Win7 with linked clones will not be possible, or (if you use a clumsy method to change the CMID) supported by Microsoft.

  Does anyone know if I jump thorugh the hoops to get the number of my KMS above 25 will be KMS activates the CMID even again and again?

  Anyway to change View Composer sysprep to include / generalize?

  Regarding the last comment, thin clients with VIEW4/PCoIP press

  the HCL (including various thin clients HP) have generally been certified

  hardware and software meeting required set out under VMWare

  light client certification program.

  With the exception of customers zero in the HCL (which already)

  a native support of PCoIP via a TERA processor), we should be able to

  install a client VIEW of any one and you connect via the PCoIP Protocol.

  I hope that clarifies.

  Ian

• Re: Satellite L755 - Win7 64-bit to Win7 32-bit Downgrade

  Who may be of concern,

  I'm Felix of Indonesia.
  I bought a used laptop Toshiba L755 in Indonesia of Indonesian citizen who has never put this phone in Indonesia.

  Because of the availability of software that wasn't installed on my laptop, I downgrade my Windows 7 Home premium OEM 64 bit for Windows 7 32-bit operating system. I spoke with representatives of the Indonesia, they told me that I must ask the OS from Toshiba Software in UAE UNITED (origin of the laptop).

  I really need some advice because I can get (doenload) this Windows 7 HP 32 bit.

  Kind regards
  Felix

  Can you please post exact phone model or part number. You can find information about Toshiba sticker placed on the bottom of your machine.

  Using this part number, we can check Toshiba UAE download page and make sure that Win7 32-bit drivers are available or not.

• Update Win7 Home Premium 32-bit to Win7 Home Premium 64-bit

  I just bought a Thinkpad X 201 comes preinstalled with Win7 Home Premium 32 - bit installed and I prefer to run the 64-bit version. Is it possible that I can get the DVD (s) necessary economically and the current product on my laptop key will validate the 64-bit version? I understand that this will require a clean install, but as MS normally provides both 32-bit and 64-bit win7 version with it games standard OEM hoped that Lenovo could provide me DVD (s) you need to little or no costs (delivery?).

  Hi DrMike9 and welcome to the Lenovo user community!

  You can do it! See this support page:

  http://www-307.IBM.com/PC/support/site.WSS/document.do?sitestyle=Lenovo&lndocid=MIGR-74752

  I hope this helps!